Used Bühler Mkzc 30/70 for sale (33,805)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Pedpfx Aey Hkd Hsf Rsgp Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 34435, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 170 t, stroke length: 200 mm, operating speed: 21 mm/s, reverse speed: 180 mm/s, table width: 120 mm, table length: 3,050 mm, table height: 970 mm, throat depth: 405 mm, ram plate length: 3,050 mm, distance table to ram: 400 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, total length: 4,945 mm, total width: 2,000 mm, total height: 2,995 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM 170/30 Touch-B Year of manufacture: 2012 Serial number: 34435 Technical specifications Force: 1700 kN Working length: 3000 mm Distance between uprights: 2600 mm Pedpfx Aszk H A Def Rogp Stroke: 200 mm Distance table – ram: 400 mm Gap: 405 mm Turbo: PP5400 Approach speed: 128 mm/s Working speed: 22 mm/s Return speed: 200 mm/s Weight: 11500 kg Motor: 37 kW Oil: 350 L Weight: 11500 kg LxWxH: 4945 x 22000 x 2995 mm COMMAND CONTROL TOUCH-B – • Table PP8170 V-axis • EFL 90 • Top tool clamping PP3090 – Wila • Hydraulic top tool clamping PP3100 • PP3160 hydraulic clamping V-dies • Back gauge X R Z1 Z2 X’ • Safety: CE PP3580 – lasersafe • 2 supports, front

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Podszmx Iwepfx Af Rjgp Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

Condition: used, Cloth lapper, polishing wheel, grinding wheel -Cloth lapper with abrasive cloth: grain 220 -Diameter: Ø 160 mm -Width: 30 mm -Take: Ø 50 mm -Number: 7x brushes available Psdpjb A S Ryofx Af Rsgp -Price: per piece -Weight: 0.3 kg

Condition: used, Cloth lapper, polishing wheel, grinding wheel -Cloth lapper with abrasive fabric: grain 220 Pedob A S N Ejpfx Af Rsgp -Diameter: Ø 160 mm - Width: 30mm -Intake: Ø 10 mm -Number: 8x brushes available -Price per piece -Weight: 0.4kg/pcs

Condition: excellent (used), Cloth rag, polishing wheel, grinding wheel Pgedpfx Asb A Nnkjf Rep -Cloth rag with abrasive fabric grit 220 -Diameter: Ø 160 mm -Width: 40 mm -Hole: Ø 30 mm -Number: 6 brushes available -Price: per piece -Weight: 0.4 kg/piece

Condition: good (used), Guide cylinders, guide pneumatic cylinders, pneumatic cylinders, compact cylinders -Manufacturer: Festo, guide cylinder type DFM-12-30-PA-GF 170827 -Piston: Ø 12 mm Pgjdpfxox Ifmfj Af Rep -Stroke: 30 mm -Sliding guide -Number: 11 cylinders available -Price: per piece -Dimensions: 80/60/H30 mm -Weight: 0.4 kg/pc.

Year of construction: 1998, condition: good (used), Roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with pull-off conveyor, telescopic conveyor belt, conveyor belt, telescopic conveyor, unloading telescope, loading telescope, roller conveyor telescopic conveyor -Roller conveyor: completely electrically movable -Telescope: extendable to 10,620 mm -Roll width: 800 mm Pgsdpfx Afsfmm Dbj Rep -Length: 5230-10,620mm -Load capacity: up to 50 kg/m -Working height: 1615 mm -Transport dimension: 5230/1320/H2170 mm -Weight: about 2000 kg

Condition: good (used), Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Manufacturer: Festo, Guide cylinder type DFM-25-30-PA-GF 170849 Pgodjxlncuepfx Af Rep -Piston: Ø 25 mm -Stroke: 30 mm -Max. pressure: 10 bar -Number: 3x cylinders available -Price: per piece -Dimensions: 105/95/H45 mm -Weight: 1.4 kg/piece

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Manufacturer: Haffner, milling motor type M 30 -Power: 300 W 17000 rpm -Voltage: 200 V 300 Hz Psdpfsku Hrrex Af Rogp -Dimensions: 240/70/90 mm -Weight: 2.5 kg

Condition: used, Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 1200 x 305 mm Psdpfx Afsrri Tho Rogp -Total height: 70 mm -Struts: wall thickness 2 mm -Bridge height: 40/9 mm - Gratings: Hot-dip galvanized -Quantity: 2x grids available -Price per piece -Weight: 10 kg/piece

Condition: excellent (used), CTS TSS-70/130 Temperature Shock Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Machine Type: Temperature Shock Testing Chamber / Temperature Testing Chamber Test Volume: approx. 130 liters For sale is a used temperature shock testing chamber from the manufacturer CTS. The system is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, quality assurance, and research and development. Technical Data Hot Chamber: +50 °C to +200 °C Cold Chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Cycle time: < 10 seconds Temperature adjustment rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min Cooling rate: approx. 4 K/min Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K External dimensions approx.: 2335 x 940 x 1820 mm (W x D x H) Loading dimensions approx.: 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions approx.: 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight approx.: 950 kg Power connection: 400 V 3/N / 50 Hz Power consumption: approx. 16.6 kW Rated current: approx. 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant Pre-cooling Stage: R404A, 4.0 kg Refrigerant Cooling Stage: R23, 0.6 kg / 10 bar Operating overpressure PS: 25 bar Operating Requirements Water-cooled design Cooling water connection required Compressed air connection required Operation possible only with cooling water and compressed air Cooling water inlet: 3 - 6 bar Equipment CTS Control Panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface Podpfxozf Ibks Af Rogp RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Trolley with lead screw drive Test chamber / trolley made of stainless steel Insert basket made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Scope of Supply 1x CTS TSS-70/130 Temperature Shock Testing Chamber Insert basket / test chamber equipment Existing documentation / files Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The device can be switched on Scope of supply as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Condition: excellent (used), Here we offer an LDS cooling fan. LDS blower. Maximum speed: 2900 RPM. Power supply: 415V 3PH 50Hz. Type: V870 50Hz. Condition: used. Scope of delivery: (See image). Pjdpfx Aezfg Ntef Regp (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Year of construction: 2004, condition: used, functionality: unexamined, ASYS Rommel PCB Transport System – Items 1x LAG 55 WA Magazine Loader 2x TRM 01-S (1x OK, 1x spare part) 1x LAG 55 WA 470 Magazine Loader 1x LBE 55 WA 470 Magazine Unloader 2x FPS 30 Transport and Buffer Module - All devices are untested; however, where a power connector was present, at least the display was switched on and booted. Pjdezktx Eopfx Af Regp - For an additional charge, we can arrange shipping or assist with it.

Condition: excellent (used), CTS TV-70/530 Climate Test Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TV-70/530 Machine type: Climate test chamber / Shaker chamber Test chamber volume: approx. 530 liters Pgodpfx Afszd Uq Ao Rjp For sale is a used climate test chamber from CTS Clima Temperatur Systeme GmbH. The system was developed for combined temperature and vibration tests and is suitable for environmental simulation, material testing, electronics testing, quality assurance, as well as development and stress tests. Note: Shaker/vibration exciter is not included in the offer. Technical data Test chamber dimensions: approx. 850 x 730 x 860 mm (W x D x H) External dimensions: approx. 1450 x 2250 x 2000 mm (W x D x H) Weight: approx. 1,200 kg Temperature range: -70 °C to +180 °C Heating rate: approx. 5 K/min Cooling rate: approx. 5 K/min Refrigerant: R404A / R23 Rated power: 16 kW Rated current: 29.1 A Equipment Shaker chamber for combined tests Test chamber prepared for vibration applications Cascade refrigeration system Temperature testing Accessories as shown in the pictures Application areas Temperature testing Combined climate and vibration testing Environmental simulation Electronics testing Material testing Quality assurance Research and development Scope of supply 1x CTS TV-70/530 climate test chamber Scope of supply as shown in the pictures Condition Used Optical condition as shown in the pictures Shaker/vibration exciter is not included in the offer. Items, machines or other accessories shown in the pictures that are not explicitly described are not included in the scope of supply. Scope of supply as shown in the pictures. Subject to changes and errors in the technical data as well as prior sale.

Condition: used, maximum load weight: 2,187 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 01/2023, loading space length: 3,010 mm, loading space width: 1,830 mm, loading space height: 350 mm, total width: 2,290 mm, total height: 2,785 mm, A48 GW26000051 Low-bed trailer by STEMA, model SySTEMA ST 27-30-18.2, equipped with tarpaulin and Premium frame, 150 cm (185 cm internal height), gross vehicle weight: 2,700 kg, with overrun brake, 100 km/h Pgjdpfx Asytzubof Rsp Subject to errors and prior sale.

Condition: used, maximum load weight: 2,187 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 01/2023, loading space length: 3,010 mm, loading space width: 1,830 mm, loading space height: 350 mm, total width: 2,290 mm, total height: 2,785 mm, A48 GW26000051 Low loader by STEMA, model SySTEMA ST 27-30-18.2, with Premium tarpaulin and frame 150 cm (185 cm interior height), GVWR: 2,700 kg, overrun brake, approved for 100 km/h Psdjyqdqgspfx Af Rogp Subject to errors and prior sale.

Condition: used, Year of construction: 1998, functionality: fully functional, power: 27 kW (36.71 HP), input voltage: 400 V, input current: 400 A, input frequency: 50 Hz, pressing force: 170 t, operating speed: 12 mm/s, reverse speed: 130 mm/s, table width: 150 mm, table length: 3,050 mm, throat depth: 400 mm, distance table to ram: 400 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, overall weight: 11,500 kg, We are offering this used LVD PPEB 170/30 CAD-CNC press brake, manufactured in 1998. Type: PPEB 170/30 CAD-CNC Serial number: 25169 Maximum capacity: 1700 kN Maximum weight: 11500 daN Date of manufacture: 05/98 Voltage: 400 V Frequency: 50 Hz Power: 27 kW Pedjzicf Eopfx Af Regp If you have any questions or require further information, please do not hesitate to contact us.

Condition: ready for operation (used), Bosch SM 15/30-TC 1 servo module 1070075975-101 SN:001526370, used, in good condition, 100% fully functional, scope of delivery as per photos. Podjy Np H Eepfx Af Rsgp

Condition: ready for operation (used), Trumpf 12-12-30-A32/09 disc laser S/N 1804667-00097 + power cable, used, minor signs of use, 100% functional, scope of delivery as per photos Pedpfx Afexaib Ij Rsgp

Condition: ready for operation (used), Bosch SM 20/30 GTC - SM 20 / 30 GTC pulse inverter 1070068043-207, serial number as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Pgedpfjtqi Dpjx Af Rjp

Condition: new, AC motors FY 70 B-4 three-phase motor SN:526/13068K03 ,unused, 100% functional, scope of delivery as per photos Pedpfx Aeuh Ia Djf Rjgp

Condition: used, Year of construction: 2005, functionality: fully functional, 630 kVA transformer station, year of manufacture 2005, Bockenem UK1700-30, 630 kVA oil transformer, 20kV±2x2.5%/400 V, AREVA, DCU3834 with HV plug-in bushings AK, LV Pfisterer terminals. Pgjdpfexzq Dtex Af Rsp

Condition: refurbished (used), ROLLFORMING LINE Psdpfsg Rkv Eox Af Rogp

Condition: used, Year of construction: 1990, Heavy-duty rollforming line Pedoymzzujpfx Af Rsgp 10 stations Width: 260 mm