Used Bsi Ngv 70 for sale (12,813)

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: Djdezy Hwgspfx Aptscl • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo Dcsdpfx Aszy Hrqeptjl • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, puncher 70.0 t round bar steel 45.0 mm square edge steel 45.0 x 45.0 mm L-beam 150 x 150 x 13 mm hole punching press: capacity (dia. x thick.) Ø 27.0 x 20 mm shear: flat material 450 x 15 / 300 x 20 mm throat 300 mm Dcsdsy Uy Sispfx Aptol work stroke 70.0 mm work height max. 1095 mm total power requirement 9.0 kW weight 1925 kg range L-W-H 1800 x 1200 x 2000 mm current new price approx. 25.000 euros special price on request Equipment: - electro-hydraulic profile steel shears with 4x work stations * flat steel shears * profile steel shears * hole punch * notching station - driven by two hydraulic cylinders - stepless stroke adjustment - support table at hole punching & notching station - material stripper - side storage options - 2x freely movable foot switches - operating instructions (PDF)

Condition: used, Year of construction: 1999, I - beam section - flat steel 100 x 15 (d 400) mm I-beam section - upend 60 x 10 (d 500) mm L-beam 50x50x6,0 (d 600) mm round material 35.0 (d 500) mm bar material dia. max. 70 x 1.5 (d 1500) mm square material 50x50x3.0 (d 1400) mm bending speed 8.5 U/min roll diam. toproll 152 / 162 mm bore 40.0 mm voltage 400 V Stroke length 120 mm total power requirement 2.2 kW weight 470 kg range L-W-H 900 x 600 x 1100 mm Original price with accessories: approx. 10,000 euros Features: - Two driven rollers (lower rollers) - Manual feed of the upper roller - Horizontal and vertical working positions - Shafts mounted with tapered roller bearings Dsdpfx Apezlulvetscl - Lateral, manually adjustable stop rollers - 1 set of standard rollersâ??split - 3 sets of tube rollers - 1 freely movable control unit - Operating instructions

Condition: used, Year of construction: 1991, pressure 70.0 t punching cross-cut in cmm 27 in 20 mm punching cross-cut in cmm 32 in 14 mm work height max. 1060 mm column arm 500 mm weight of the machine ca. 1500 kg. total power requirement 7.0 kW range L-W-H 1550 x 1200 x 1950 mm good / well-maintained condition (!!) New price approx. 21.000 euros Special price on request Equipment: - electro-hydraulic hole punch, with large projection - large GEKA stop table with movable stop system - sheet metal stripper with stripper plates - stepless stroke adjustment - die base - 1x freely movable foot switch Dcedpjxabu Tsfx Aptol - operating instructions (PDF)

Condition: new, Technical data: Dcedohtuvrspfx Aptel Working width mm 1,350 Min./max. working height mm 4 - 170 Sanding belt width/length mm 1,370/2,620 Main motor power kW 18.5 with inverter Feed speed, variable m/min 3.5 - 18 Working units: 1. Unit: "RA" diagonally ribbed contact roller, Sh 86, diameter 160 mm 2. Unit: Combi: rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad "MESAR" with 24 segments Version C: - Elastic electronic segmented sanding pad "MESAR" complete with: - Pneumatic cylinder (on/off) for the automatic raising and lowering of the sanding roller/sanding pad unit - Activation of the sectors via the electronic control system, which synchronizes their engagement with the feed speed and controls the number based on the workpiece geometry, and enables the selection of more or fewer sectors to the left and right of the workpiece. Version 135: "MESAR 24" with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Additional equipment: Roller table at the infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with electric fan 4 kW (5.5 hp) integrated into the machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4" display with 'eye S software integration' ATTENTION: IMAGES are EXAMPLE IMAGES of a SIMILAR SD70!

Condition: used, functionality: not functional, Year of construction: 2007, load capacity: 7,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,100 mm, fork carriage width: 2,100 mm, empty load weight: 10,784 kg, drive type: Diesel, Diesel forklift Load center: 600 Mast type: Standard Dedpfxsza Iy Ds Aptocl Technical condition: Used for spare parts Front tire type: Superelastic Front tire size: 355/65-15 Rear tire type: Superelastic Rear tire size: 3.00-15 Description: R70-70 - Forklift for spare parts Full cabin Forklift for spare parts

Condition: used, Year of construction: 2019, operating hours: 13,119 h, Type of fuel: Electric Colour: Grey Empty weight: 12.414 kg Dimensions (LxBxH): 375 x 200 x 292 cm Lifting capacity: 7.000 kg Lift height: 352 cm Fork dimensions: 2.400 x 1.930 mm - Year: 2019 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516342V00017 - Operating hours: 13119 - Lifting capacity: 7000kg - Lifting height: 3520mm - Overhead clearance: 2920mm - Free lift: 0mm - Fork length: 2400mm - Maximum fork width: 1930mm - Minimum fork width: 560mm - Number of wheels: 6 Wheels - Attachment: 4 fork spreader, Side-shift - Options: Work lights, Heating, Full cabin - Mast: Duplex - Inspection valid until: 06.2025 - Drive: Electric - Brand/Type: Still - Battery year of construction: 2019 - Capacity: 1240Ah - Battery voltage: 80V - Battery test result: 65% - Transport dimensions: 3750mm x 2000mm x 2920mm (l x w x h) - Transport weight [kg]: 12414kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Djdpjwnii Djfx Aptecl Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: good (used), Year of construction: 2017, Item: LC-10549 – Alfa Laval pump LKH70-110kW Alfa Laval LKH-70 Centrifugal Pump – 110 kW Used Alfa Laval LKH-70 sanitary centrifugal pump, suitable for high-capacity applications in the dairy, food, and beverage industries. The pump is equipped with a large Ø280 mm impeller and a powerful 110 kW motor. Technical data: Manufacturer: Alfa Laval Type: LKH-70 Year: 2017 Dcedpfx Apjzymx Dotsl Serial No.: 215309 Motor power: 110 kW Frequency: 50 Hz Impeller diameter: Ø280 mm Inlet: approx. DN100 Outlet: approx. DN80 Maximum flow according to Alfa Laval performance curve: up to approx. 260 m³/h, depending on the required head and product characteristics. CE marked Hygienic stainless-steel design Suitable for pumping milk, dairy products, water, and other low-viscosity food products. Original Alfa Laval performance curves are available. Machine located in Denmark and available for sale.

Condition: used, maximum load weight: 29,770 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2027, loading space length: 11,560 mm, loading space width: 2,480 mm, loading space height: 2,445 mm, loading space volume: 70 m³, total length: 12,130 mm, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2024, Equipment: ABS, H&W (Vreden) AGRAR – Walking Floor 70 cbm, fully equipped First registration: 06/2024 Mileage: 77,648 km Dimensions (L x W x H): 11,560 x 2,480 x 2,360 / 2,566 mm (tapered design) Saddle height: 1,250 to 1,300 mm Overall height: 3,900 mm SAF axles "Off-Road" with large disc brakes, 430 mm WABCO trailer EBS with RSS stability program Chassis: Fine-grain steel, hot-dip galvanized Forced steering on the 1st and 3rd axles, TRIDEC system with rod steering 3 central lubrication points, positioned externally Tire size: 6 x 445/65 R 22.5 Djdpfx Ajzmqmrsptocl Cargo Floor, AGRAR version, with 15-plank system, reinforced design, 10 mm WIRELESS remote control for floor and rear door Profile supports on the side walls, completely welded from the inside (grain version) 2 reinforced transverse braces Stainless steel wear plate at the rear, under the floorboards Front wall with cleaning door Hydraulic rear door with grain slide Hydraulic connections on the front wall and additionally on the support legs PNEUMATIC DIVIDER POSITIONER RENTING is the new BUYING; with us, it is also available immediately in a full-service rental.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 22,918 h, travel distance X-axis: 700 mm, overall weight: 4,250 kg, spindle speed (max.): 24,000 rpm, number of axes: 5, This 5-axis DMG MORI DMP 70 was manufactured in 2019. It features a maximum spindle speed of 24,000 rpm and a weight of 4,250 kg, making it a robust option for precision machining. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMP 70 vertical machining centre we have for sale. Contact us for further details. Dcodpfszx Sryex Aptjl - Phase: L1/L2/L3/N/PE- Power Consumption: 30 kVA- Maximum Current (A In max): 43.5 A- Rated Current: 50 A- Short-Circuit Current (V max): 5 kA / 440 V max.- Voltage: 400 V ±10%- Frequency: 50 Hz- Control Voltage AC: 230 V- Control Voltage DC: 24 V

Year of construction: 2003, condition: ready for operation (used), - USED - 7-AXIS SYNCHRONIZED CNC PRESS BRAKE    AXIS: Y1 - Y2 - X - X1 - R - Z1 - Z2 Djdpfsrk Shcox Aptecl BENDING LENGTH: 3150 mm TONNAGE: 70 ton THROAT DEPTH: 400 mm DISTANCE BETWEEN UPRIGHTS: 2640 mm OPEN HEIGHT: 450 mm APPROACH SPEED: 160 mm/sec RETURN SPEED: 160 mm/sec WORKING SPEED: 0-10 mm/sec MOTOR POWER: 15 kW CONTROL UNIT: ESA KVARA WEIGHT: 7800 Kg OVERALL DIMENSIONS: 3400 x 2100 x 2650 mm

Condition: used, Year of construction: 1995, operating hours: 2,610 h, lifting height: 2,990 mm, fuel type: diesel, mast type: duplex, fork length: 2,290 mm, fork width: 1,380 mm, total height: 2,740 mm, total length: 3,500 mm, total width: 1,990 mm, color: red, Empty weight: 10.240 kg Lifting capacity: 7.000 kg Price: On request Dodpfx Aozf Ha Esptscl - Year: 1995 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 6ZT15P2 - Operating hours: 2610 - Lifting capacity: 7000kg - Lifting height: 2990mm - Overhead clearance: 2740mm - Fork length: 2290mm - Maximum fork width: 1380mm - Minimum fork width: 400mm - Number of wheels: 6 Wheels - Attachment: Side-shift - Options: Work lights, Air tires, Full cabin, Joystick, Camera - Mast: Duplex - Drive: Diesel - Motor brand: Toyota - Transport dimensions: 3500mm x 1995mm x 2740mm (l x w x h) - Transport weight [kg]: 10240kg - Transport packages [pcs.]: 0 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00650, load capacity: 70 kg, arm reach: 2,050 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-710iC/70 manufactured in 2011.04. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/70 Djdpfx Apezxb Tgstecl Model Number: A05B-1125-B202 Year of Manufacture Robot: 2011.04 Warranty term (months): 12   Payload (kg): 70 Reach (mm): 2050 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2011.03 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 12

Condition: used, pressure 70 t chamfer lenght 2600 mm distance between columns 2750 mm Djdpjtqqqiefx Aptocl stroke 60 mm weight of the machine ca. 4,3 t dimensions of machine L x W x H 4,45 x 1,30 x 2,53 m Accessories: upper and lower die (each in segments) on 2500 mm length, 2 upper die segments each 835 mm long, back stop

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams Dsdpjw Nafkjfx Aptecl - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT22001014840, empty load weight: 4,000 kg, maximum load weight: 16,000 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, total length: 9,975 mm, total width: 2,550 mm, total height: 1,000 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Year of construction: 2026, Equipment: center pivot plate, Archive photos - actual vehicle may differ #Container locking system 2 pairs of locking hooks recessed into the floor Pneumatic actuation Low-tension locking system, clamping force 6 t per claw Genuine original for 30+ years 2-point internal container locking; skip containers with internal ridge not lockable (for skip containers with sub-frame to DIN 30722, rear-loaded) Note: push container fully flat at the front roller recess Longitudinal guide rails, laterally adjustable/removable, approx. 115 mm high Turntable with heavy-duty ball-bearing slewing ring 8 pairs lashing points, top/side, outer frame, 5 t each 7 pairs combi stake pockets, bolted ring eyes, 5 t each, outer frame, approx. 72x42 mm (usable w/ plug-in stakes; fitted stakes block 5 t eyes) 1 lockable plastic tool box, W=600 / H=425 / D=460 mm 1 open storage box for container net Turntable trailer towing gear Drawbar with certified 40 mm tow eye Lowerable Y-shaped drawbar, pneumatic raise/lower assist (for Absetzcontainer transport, rear-loaded) #Axles & suspension BPW or SAF drum-brake axles, manufacturer's choice Laser-aligned axles/running gear - reduces tyre wear and fuel use Axle grease points extended outward Air suspension with raise/lower valve Air-bellows pressure gauge #Wheels & tyres 235/75 R 17.5, manufacturer's choice Steel wheels, twin arrangement, factory silver TPMS to ECE R 141, shown via EBS on tow display, no truck install (pre-equipped; standard tyres only) #Braking system 2-line air braking system Spring-loaded parking brake Axle load detection via EBS CAN-bus, cab display; truck pre-equipped, no install (not a calibrated scale) Vehicle driving stability system Front Duomatic connection, with line to towing vehicle 24V EBS electronic braking system, front EBS connector and cable Caution: tow only with vehicles that guarantee ABS effectiveness #Electrics 24V LED multi-chamber lamps; yellow LED side lights; LED plate light (false diagnostics possible on some tow vehicles) Yellow LED side lights coupled with indicator (flashing side lights) Dsdpfxezy Rw Ro Aptecl 2 white LED front position lights 2 white/red LED rear outline marker lights 1 x 15-pin front connector, with connecting cable Parking sockets for electrics, air and EBS on the drawbar Additional rear LED work light, via reversing light LED beacon with mount, switched via sidelight (lamp removable) LED work lights both sides, via reversing light #Floor Steel floor Front roller recess in floor for skip containers 5,000-7,000 mm long Note: slight floor waviness possible due to welding distortion #Loading ramps Lockable storage space for loading ramps beneath the load bed 1 pr aluminium ramps ca. 3,000x450 mm, 14,000 kg/pair (not for steel chains/tyres; rear rail) #Country of registration / plates Country of registration: Germany With Dekra inspection and report (per §13 EG-FGV) Contour marking, reflective tape to ECE R 048, white sides/red rear

Condition: used, Year of construction: 2003, Technical details: turning diameter over bed: 720 mm turning dia. over face-slide: 430 mm turning length: 2000 mm bed width: 480 mm centre distance: 2000 mm centre height: 360 mm face slide travel: 410 mm control: Siemens Sinumerik 810D Weiler D2 Steuerung Dcodpfx Apezdn S Hjtel revolution per minute: 1 - 1800 U/min spindle diameter: 280 mm spindle bore: 216 mm spindle head: DIN 55026 - Größe 15 max. torque on the spindle: 4300 Nm tailstock taper ISO: MK 6 tailstock quill stroke: 225 mm tailstock quill diameter: 115 mm total power requirement: 30 kW Weight approx.: 6,2 t dimension machine approx.LxWxH: 4,3 x 2,5 x 1,95 m WEILER E70 x 2000 Oil Country Lathe – Rare Special Version with 216 mm Spindle Bore We are pleased to offer this exceptionally rare WEILER E70 x 2000 Oil Country Lathe, manufactured in 2003, in very well-maintained condition. This machine is not a standard WEILER E70, but a factory-built special Oil Country version, specifically designed for machining long pipes, bar stock and large-diameter workpieces. Featuring an extra-large 216 mm spindle bore, this machine is one of the rare WEILER Oil Country Lathes and was specially developed for demanding applications in the oil & gas, pipeline, energy and heavy engineering industries. Wide Range of Applications Thanks to its rigid construction, large spindle bore and heavy-duty design, this machine is ideally suited for: Oil & Gas Industry Drill Pipe Machining Casing and Tubing Pipes Pipeline Construction Energy Industry Steel and Pipe Mills Mechanical Engineering Heavy Equipment Manufacturing Repair and Maintenance Workshops Machine Repair Companies Tool and Die Shops General Engineering Workshops Job Shops and Contract Manufacturing Single-Part and Small Batch Production Hydraulic Cylinder Manufacturers Companies machining large bars, shafts and tubular materials *

Condition: new, Year of construction: 2026, BENDMASTER 70 Tube and Profile Bending Machine The BENDMASTER 70 tube and profile bending machine is an industrial, non-mandrel bending machine designed for precise bending of steel tubes, square profiles, and materials with larger cross-sections. Thanks to its robust construction, automated bending angle measurement system, and powerful drive unit, the machine provides repeatability, efficiency, and reliability – even during intensive production work. It is an ideal solution for heavy industry, construction, and industrial installation applications. Main advantages of the machine Non-mandrel bending system – enables tube bending without the need for a mandrel, simplifying operation and accelerating the production process. Maximum tube capacity of 70 × 5 mm – allows processing of thick-walled steel and structural tubes. 5 kW main drive motor – provides high torque and reliable bending performance even with demanding materials. Digital bending angle display – real-time monitoring of preset and actual values enables precise parameter adjustment. Two-speed operating system – 1.2 rpm during bending and 2.4 rpm during return movement increase overall cycle efficiency. Dcjdpfxjvugv Ao Aptsl Stable welded steel construction – ensures resistance to deformation and vibration, even under heavy loads. Dies for tube diameters 38.1 mm, 48.3 mm, and 70 mm – the machine includes tooling for the most commonly used industrial tube sizes. Design and technology The BENDMASTER 70 has been designed as a non-mandrel roller bending machine with an electro-hydraulic drive system, suitable for heavy-duty operation. The powerful 5 kW main motor enables stable and safe bending of large-diameter tubes. The digital bending angle measurement system integrated with the control panel allows precise programming and monitoring of operating parameters. The machine features a compact design and can be integrated into production lines. Precision and work efficiency The BENDMASTER 70 steel tube bending machine provides complete control over the bending process. The die rotation speed during bending (1.2 rpm) ensures accuracy and process safety, while the fast return speed (2.4 rpm) improves productivity. The ability to bend up to 180° allows the production of complete arcs and spiral shapes, including large-section structural tubes. The machine is designed for precise forming of components where dimensional accuracy is critical. Applications The BENDMASTER 70 bending machine is used in many industrial sectors, including: production of steel structures and load-bearing components, construction and installation industries, HVAC and heating system installations, production of railings, gates, and industrial fencing, prefabrication plants for piping systems. Standard equipment Digital bending angle measurement system Tube bending dies: Ø 38.1 mm Ø 48.3 mm Ø 70 mm Technical specifications Parameter Value Maximum tube bending capacity 70 × 5 mm Maximum square profile capacity 50 × 50 × 2 mm Maximum bending angle 180° Die rotation speed during bending 1.2 rpm Die rotation speed during return 2.4 rpm Main motor power 5 kW Overall dimensions 1300 × 700 × 900 mm Weight 680 kg

Condition: used, Fröling Turbomatic TMC – automatische Hackschnitzelkessel (35–110 kW) Mehrere Fröling Turbomatic TMC Anlagen auf Lager – sofort verfügbar. Leistung (kW) – Preis (netto) 35 kW 55 kW 70 kW 85 kW 110 kW Der Fröling Turbomatic ist ein vollautomatischer Biomassekessel, geeignet für Hackschnitzel, Späne und Pellets. ✔ Vollautomatischer Betrieb ✔ Robuste Industrieausführung ✔ Hohe Betriebssicherheit Der Preis beinhaltet bereits die Einzugsschnecke (Dosierschnecke), die das Brennmaterial automatisch direkt in den Brennraum fördert. Das komplette Austragungssystem (Raumaustragung) ist in der Regel nicht enthalten (separat erhältlich). 👉 Beim 110 kW Modell ist das komplette Austragungssystem bereits im Preis enthalten. ⸻ Technische Highlights: • Lambda-geregelte Verbrennung für optimale Effizienz und niedrige Emissionen  • Automatischer Rost mit Rüttel- und Kippfunktion für saubere Verbrennung  • Mehrzug-Wärmetauscher mit automatischer Reinigung (WOS-System)  • Automatische Entaschung von Brennraum und Wärmetauscher  • Induzierter Saugzugventilator für höchste Betriebssicherheit  • Großer Brennraum mit Schamottauskleidung für hohe Temperaturen und stabile Verbrennung  ⸻ Weitere Vorteile: • Modulares System – einfache Installation • Einzelantriebe für alle Komponenten → hohe Zuverlässigkeit • Anpassung an unterschiedliche Brennstoffe und Feuchtigkeit ⸻ Dcedpfx Aswakktsptel TOP HEATING SYSTEMS – Gebrauchte Heizungsanlagen, Kessel, Wärmepumpen & Zubehör direkt ab Lager Wir sind ein Familienbetrieb mit rund 20 Jahren Erfahrung im Bereich Heiztechnik und verfügen über ein 1.500 m² großes Lager in Mosonmagyaróvár, Ungarn, mit einem ständig verfügbaren Bestand von ca. 50–60 Geräten. 📍 Standort: Unser Lager befindet sich in Mosonmagyaróvár, Ungarn – ca. 15 km von der österreichischen Grenze und ca. 80 km von Wien entfernt. Mosonmagyaróvár ist die erste größere Stadt auf ungarischer Seite nach der österreichischen Grenze. 🔥 Unser Sortiment umfasst unter anderem: • Hackschnitzelkessel • Pelletkessel • Holzvergaserkessel • Stückholzkessel • Biomassekessel • Öl- und Gaskessel • Wärmepumpen • Thermoventilatoren • Heißluftgebläse • Warmluftheizungen • Industrieheizungen • Pufferspeicher • Wärmetauscher • Förderschnecken • Raumaustragungen • Brenner • Pumpen • umfangreiches Heizungszubehör ⚙️ Zubehör und Komponenten: Zusätzlich verfügen wir über eine große Auswahl an Zubehör, darunter Umwälzpumpen, Plattenwärmetauscher und viele weitere Komponenten – von privaten Anwendungen bis hin zu industriellen Größen. 🏭 Marken in unserem Sortiment: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus und viele weitere. 🌐 Aktuelle Angebote: Ein Großteil unseres aktuellen Angebots finden Sie auf unserer Website: Zusätzlich verfügen wir über weitere Geräte, die noch nicht inseriert sind. 📅 Besichtigung: Eine Besichtigung in unserem Lager ist nach vorheriger Terminvereinbarung möglich. Bei Interesse kontaktieren Sie uns gerne – wir helfen Ihnen, die passende Lösung zu finden.

Condition: used, functionality: fully functional, machine/vehicle number: 517327C00131, Year of construction: 2012, load capacity: 3,000 kg, lifting height: 4,650 mm, free lift: 150 mm, fuel type: gas, mast type: simplex, construction height: 2,930 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift Fahrgestellnummer: 517327C00131 Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: Good Front tires type: Superelastik Rear tires type: Superelastic Description: Without fork positioner. Sideshift, Dcjdpfx Apsu D Sqhetol 3rd valve, 4th valve,

Year of construction: 2013, condition: excellent (used), Temperature Test Chamber VTS³ 7160-5 H Water-cooled For sale is a used temperature test chamber from the manufacturer Vötsch. The test chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Dcodpfx Aezv S Hfeptjl Technical data Manufacturer: Vötsch Type: VTS³ 7160-5 H Equipment type: Temperature test chamber Test chamber volume: approx. 1568 liters Test chamber dimensions: approx. 1100 x 950 x 1498 mm (W x D x H) Housing dimensions: approx. 1300 x 2635 x 2013 mm (W x D x H) Weight: approx. 1700 kg Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 5 K/min Temperature change rate (cooling): approx. 4 K/min Max. heat compensation: approx. 5000 W Temperature deviation (time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.1 to ± 2.0 K Refrigerant: R404A Refrigerant quantity: 5.20 kg ND max.: 18 bar g HD max.: 25 bar g Refrigerant: R23A Refrigerant quantity: 1.30 kg ND max.: 18 bar g HD max.: 25 bar g Cooling water consumption under full load at Temperature difference Dt = 10 K: 2.2 m3/h Temperature difference Dt = 5 K: 4.4 m3/h Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17.6 kW Rated current: 32 A Features Touch panel operation Interior made of stainless steel Side access ports Test chamber equipment as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition according to pictures Scope of delivery 1x Vötsch VTS³ 7160-5 H temperature test chamber Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight transport possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Lamella – Carcase Press with Rapid Traverse Technical specifications: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm, depth 700 mm; - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with field-proven tolerance compensation for tightly pressed carcase joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressing beams is infinitely variable via two potentiometers and set electronically via frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressing beams: min. 500 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Pressing force for vertical pressing beams: min. 300 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Including option: Rapid traverse speed for quick positioning of the pressing beams, controlled by automatic workpiece detection with sensors in the pressing beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. Sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressing beams, e.g., for low pressing forces, drawers, and carcases at 45 degrees. Easy operation via six separate push buttons, freely adjustable pressing time preselection with automatic opening feature, loading height 300 mm. The machine is available from our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg Dcjdpfxsy Egz So Aptjl - available immediately -

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available - Dcsdpfxsiidm Ne Aptol

Condition: as good as new (ex-display), Year of construction: 2026, Technical specifications: Laminated panel press from our showroom; Working area: width from 150 - 2,550 mm, height from 150 - 1,400 mm, depth from 150 - 700 mm; Variable pressure adjustment 300/700/1100/1400/1800/2200 dN (kg) of the side pressing beam; Variable pressure adjustment 500/800/1200/1500/1900/2200 dN (kg) of the top pressing beam. Simple operation via 6 separate push buttons, freely adjustable pre-selection of pressing time with automatic opening function, loading height 300 mm. Dcjdob Eln Depfx Aptel The machine is in our showroom and can be delivered immediately. Location: available from our warehouse in 54634 Bitburg.