Case Press

Ganner - sofort verfügbar - Concept 70 Eco

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates Lhjdpfjiidm Njx Abyol - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Max. edge thickness 3 mm (optionally up to 8 mm) Min/Max. work piece thickness 8–60 mm* Min. workpiece length approx. 200 mm* Min. workpiece width approx. 80 mm* Feed speed approx. 10 m/min. Ready to operate approx. 6 min. Power consumption max. approx. 14 kW Electrical connection 400 V – 3 Ph – 50 Hz Machine dimensions 5,250 x 1,230 x 1,430 mm (LxWxH) Weight approx. 1,700 kg pre-milling head Whispercut radius for corner rounder R = 2mm Lhjdpfxsg Tu Rkj Abyjl heatable infeed fence quick change device f.motor corner rounder change motor for corner rounding unit including HM profile cutter radius for change motor R = 1mm Radius Multi-Radiusscraper R2/R1 wheels release agent spraying unit cleaning agent spraying unit protection spraying edge nesting pneumatic 3-point adjustment

Condition: used, machine/vehicle number: 007986, Max. panel width: 1000 mm Lhsdpfx Asx A Tggsbyjl Max. panel length: 2000 mm Length of conveyor: 3500 mm Panel return for edgebander: Right

Condition: new, Year of construction: 2026, CNC drill and dowel inserting machine for fully automatic bore, glue and dowel driving. The drill glue and dowel machining center with compactness, efficiency, quality and flexibility. Ledpfxodx Axfo Abyshl Short introduction: • Universal CNC controlled drilling and dowel inserting machine • Glue shot monitoring via GIC • Closed gluing system • Suitable for panel and solid wood processing • Optional additional horizontal and vertical drilling spindles • Relieves CNC machining centers • Optimal complement to nesting machines

Condition: new, Technical data: Working width: 970 mm Grinding width: 950 mm Working height: 3 - 160 mm 1 steel aggregate 2 combination unit with shoe The shoe is pneumatically pressed Sanding belt dimensions: 970 x 2150 mm Common motor power of 2 grinding aggregates: 11 kW The speed of the feeding belt on the converter: 16-18 m / sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roll diameter: 150 mm Sanding pad width: 50 mm Sanding belt speed: 18 m / s 1 unit Compressed air consumption: 20l / min Standard equipment: Mechanical oscillation of the sanding belt without the use of compressed air. ECO GEAR SYSTEM Smooth regulation of the feeding belt on the converter 4-20m / min Automatic star / delta start Steel roller on the first aggregate, rubberized on KOMBI agragata Electronic table height display Automatic reading device for gr. material and table position setting Safety switches Automatic machine switches Main engine brake Rubber pressure rollers 2-roller table at the entrance and exit In stock! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm Ljdpfog A D Anox Abyjhl

Condition: as good as new (ex-display), Year of construction: 2025, 67641340dc13f Lhsdpjl Rix Esfx Abyel

Condition: new, Bernardo Topcut 3200 ER Panel Saw Technical Specifications Table dimensions 1100 x 735 mm Panel table 3200 x 400 mm Cutting length 3200 mm Max. saw blade diameter 400 x 30 mm Max. cutting height 90° / 45° 125 / 88 mm Cutting width with parallel guide 1300 mm Table height 890 mm Table extension 600 x 615 mm Table widening 825 x 750 mm Lhjdpod N S T Djfx Abyjl Extension table with roller 1240 x 860 mm Main saw blade speed 3000 / 4000 / 5000 rpm Scoring saw blade speed 8000 rpm Scoring saw blade 120 x 20 mm Dust extraction connection Ø 100 mm Motor output S1 100% 5.5 kW (7.5 hp) Motor input S6 40% 7.5 kW (10.0 hp) Scoring motor output 0.75 kW Voltage 400 V Machine dimensions (W x D x H) 3420 x 3600 x 1610 mm Weight approx. 850 kg Scope of supply • Electric saw blade height adjustment • Digital cutting height display • Saw blade guard with infeed roller • Miter fence • Eccentric clamp • Table widening • Extendable telescopic fence • Longitudinal fence flaps • Extension table with roller • Sliding block • Scoring unit with independent motor • Operating tools Features • Powerful drive motor (5.5 kW) with high torque, designed for optimal cutting performance • Smooth-running twin-roller carriage with center and end position locking for precise cuts • Maximum saw blade diameter 400 mm for cutting heights up to 125 mm • Extension table with roller for simplified handling of larger workpieces • Foldable parallel guide with micrometer fine adjustment (advantageous for large panels) • Standard equipment includes a separately driven scoring unit (motor output 0.75 kW) • Stable saw unit with pivot elements made of gray cast iron, guided on both sides • Table widening for cutting widths up to 1300 mm included in the scope of supply • All aluminum parts (panel table, fences, etc.) are anodized • Extendable telescopic fence (up to 3200 mm) can be mounted on the extension table at the front and rear, infinitely adjustable from 90° to 45°

Condition: good (used), Price plus VAT. The product is also available in other quantities and configurations. This package includes: 14 x uprights at 5,000 mm x 1,100 m (blue) 78 x crossbeams at 2,700 mm (yellow) 156 x locking pins Lsdpfx Ajibwrusbyjhl This results in a racking row with 13 bays, each with 3 levels + a base level = a total of 156 pallet spaces (1,000 kg/pallet). Approximately 70 uprights and 1,000 crossbeams are available for this system. Simply contact us. Manufacturer: Jungheinrich Type: MPB Condition: used, good condition Height: 5,000 mm Length: approx. 36.50 running meters Racking depth: 1,100 mm Bracing: bolted Crossbeam length: 2,700 mm Bay load: 2,400 kg Row load: 12,000 kg Pallet spaces: 156 Accessories such as: Floor anchoring Connectors Load warning signs Impact protection Guardrails Grating Back panel grating Deep stringers Barrier railings and much more... Just ask us!

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 The Barbaric TSRET04 return system is a workpiece return unit for edge banding machines. It is the most basic version in the TSRET series and serves the following functions: - Transfers the workpiece at the end of the edge banding machine - Returns the workpiece to the height of the infeed of the edge banding machine Functionality After passing through the edge banding machine, the workpiece moves onto a roller table. The transfer is carried out by belt conveyors moving perpendicularly to the conveying direction, which rise from the roller table, lift the workpiece, transport it sideways, and set it down on a slightly lower roller table. This roller table conveys the workpiece to a belt conveyor. At the end of the belt conveyor, a non-driven, slightly inclined roller conveyor toward the edge banding machine’s infeed is connected. A stopper halts the workpiece at the end of the roller conveyor. Technical data - Max. load capacity: 60 kg - Max. panel size: 2,800 x 1,300 mm - Cycle time: max. 11 pieces/min Lhjdpfxex Rpgbo Abyjl Dimensions: - Return: 2,293 x 1,961 mm - Conveyor belt (L x W): 2,500 x 800 mm - Roller conveyor (L x W): 2,000 x 800 mm - Total length: approx. 6,943 mm - Total width: approx. 2,239 mm Availability: short-term Location: Flörsheim

Condition: excellent (used), SCM T130E Spindle Moulder with Glazing Bead Unit Spindle diameter: 35 mm Total spindle length: 140 mm Variable spindle speed via frequency inverter: up to 10,000 rpm Main motor power: 5.5 kW Lhsdpfoxbnyrox Abyel Unit for cutting glazing bead Unit power: 2.2 kW Electronic spindle height adjustment Electronic fence adjustment 4-roller feed Masterwood Feed speed adjustment via variator CE certified DTR technical documentation Year of manufacture: 2005