Used Busch Ra 100 for sale (36,014)

Condition: good (used), Rotary vane vacuum pump /// Oil-lubricated Manufacturer: Busch Type: RC 0100B Ultimate pressure: approx. 20 mbar Pumping speed: approx. 100 m³/h Condition: General overhaul Bsdpfobrantox Amnedd If you have any questions about this listing or general questions about vacuum generation, please do not hesitate to contact us.

Condition: like new (used), Rotary vane vacuum pump, oil-lubricated Manufacturer: Busch Type: R5 RA 0630 B Condition: Serviced, very good condition, used Warranty: 6 months Pumping capacity: 630 m³/h Operating fluid: Mineral oil Accessories: Suction filter Bedpfx Amsdf Ikdonodd Delivery time: in stock

Condition: good (used), Rotary vane vacuum pump Oil-lubricated Manufacturer: Busch Type: RA 1600 B Status: General overhaul or tested and serviced units available Warranty: up to 12 months Suction capacity: approx. 1000 m³/h Bsdpfx Aed Hh Nkomnjdd Ultimate pressure: approx. 0.5 mbar Operating fluid: Mineral oil (included) Delivery time: 1-2 weeks.

Condition: new, Year of construction: 2025, Rotary vane vacuum pump in oil bath. Available in stock. Pump completely new. With 12 months warranty Bedeftzqdjpfx Amnsdd Nominal flow: 40 m3 / h at 50Hz. Final vacuum: 0.5 mbar abs. Any clarification, do not hesitate to contact us.

Condition: used, Year of construction: 1993, operating hours: 95,192 h, Mannesmann Demag RA-100 compressor Bdedpfxstzxpws Amnsd further details and scope of delivery see photo. Technical data see type plate. Item condition: used, untested condition: used, untested Without OVP Without original packaging Example photos sample pictures A viewing in Wettringen is possible! For further questions you can contact us by email. The sale takes place exclusively to commercial interested parties for commercial purposes and under exclusion of any warranty for material defects and defects of title! With your purchase you confirm that you are working commercially or as a freelancer. Otherwise you violate our terms and conditions!

Condition: new, Year of construction: 2024, R5 RA 1600 B 4EB XXXZ 4.00 PCS 05.12.2023 25,000.00 / 1 PCS 100,000.00 Explosion protection Ex Inside II 2G Ex h IIB T3 Gb X Outside II 3G Ex h IIB T3 Gc X Without motor Ex B5-550 d65 50/60Hz Coupling PKZ 20 ATEX Oil separator with: - Antistatic venting element - G3/4 for thermostat probe Heat exchanger 41.2kW without air cooler Base frame with bore d50 Vibration dampers 4xd100 + 3xd150 Cooling water inlet G1/2 vertical with temperature controller Water valve, bypass with ball valves, G1/2 coupling Cooling water outlet G1/2 vertical with G1/2 coupling Ball valve DN25 G1 in oil drain Without temperature switch in gas Without temperature switch in oil Without level switch G3/4 Filter differential pressure gauge elevated with angle Thermometer 0-120°C R1/2 with extension Without resistance thermometer PT100 valve side 4 units available Unit price !!!!! Bdjdpfx Amoyzbd Tjnjd

Condition: excellent (used), For sale: Busch WV 1000 B 001 KDXX vacuum pump – a high-quality industrial device from the renowned brand Busch (Switzerland). The pump is designed for industrial applications where reliable operation and stable vacuum are required. ⚙️ Technical data: Manufacturer: Busch Model: WV 1000 B 001 KDXX Country of manufacture: Switzerland Motor power: 3.0 kW Power supply: 230/400 V (three-phase) Frequency: 50 Hz Speed: 2890 rpm Protection rating: IP55 Oil: ISO VG 100 🛠️ Features: Professional vacuum pump for industrial applications Robust, durable construction Bodpfx Ajyz Dw Aomnsdd Integrated oil filter/separator High performance and reliability Ideal for continuous duty 📦 Condition: Used item. Good visual condition – visible storage marks (cardboard, minor scratches). Oil visible in the system – pump has been preserved. 📌 Applications: manufacturing industry vacuum packaging automation and production lines CNC and suction systems 📦 Included: Busch WV 1000 B pump as shown in the photos 🚚 Shipping: Shipping available via courier or on a pallet.

Condition: excellent (used), For sale: Professional milling toolholder by ORION – high German manufacturing quality. • Type SK40 Ø6-100 • DIN 69871 AD standard – central cooling • Collet for Ø6 mm • Length 100 mm • Includes tool (milling cutter / drill bit) • Very good used condition, fully functional ORION toolholders are a reliable choice for CNC machining centers and milling machines with SK40 taper. PRICE IS FOR 1 PIECE. Bsdpfxsxcgxvj Amnjdd

Condition: good (used), Skid mounted Busch 630 vacuum pump in very nice condition. Direct from food factory. Bjdjptbi Dspfx Amnjdd

Condition: refurbished (used), Busch RA305D vacuum pump, fully overhauled. 0.5 mbar abs, 300 cm³/h, available from stock. Bedpowv Rbdofx Amnsdd

Condition: refurbished (used), Busch vacuum pump RA302D, completely overhauled. 0.5 mbar, 300 cm³/h, 5.5 kW. 2 units available from stock. Bjdpfjwv Rc Isx Amnedd

Condition: refurbished (used), Busch rotary vane vacuum pump / compressor, dry-running, completely overhauled. +0.6 / -0.6 bar. Available from stock. Bedpfowv Ri Iox Amnjdd

Condition: excellent (used), Professional tool holders from the renowned brand GARANT (Hoffmann Group). Model 300230 6 SK40-6-100 – clamping diameter Ø6 mm, length 100 mm. • SK40 taper – CNC standard • Clamping diameter Ø6 mm • Holder length 100 mm • Maximum rotational speed 25,000 rpm • High precision and clamping stability • Used, fully functional and ready for work. -- PRICE LISTED FOR 1 PIECE -- Bedpfew Sy D Eex Amnodd

Condition: excellent (used), For sale: professional ORION milling holder – German precision and top-quality workmanship. • Type SK40 Ø8-100 K • DIN 69871 AD/B standard – central coolant supply through the spindle • Weldon clamping (side screw) for Ø8 mm tools • Total length 100 mm • Very good condition, used – fully functional • Complete with tool (milling cutter / drill as shown in the photo) Ideal for CNC machining centers and milling machines with SK40 taper. Bedpfxsxcgygs Amnodd

Condition: good (used), The scope of delivery includes: 1x used pallet racking beam Material color: orange IPE profile: 100 x 55 mm Connector: 3 holes Clear width: approx. 2,700 mm 3 holes per connector Hole spacing: approx. 100 mm Hole diameter: approx. 11 mm 1x set of fastening material consisting of: Bjdpfjibzftjx Amnjdd 06x screws M10 06x nuts 06x washers

Condition: good (used), Technical Data for Pallet Rack Beam: Racking System: Polypal Type: Stockpal Scope of delivery includes: Bdsdpfxsxzyi Se Amnsd 01x Pallet rack beam, used Design: Top beam Material color: orange Box profile: 100 x 50 mm Type: SKVBN 09850NP22 Connector: 2 HK (hooks) Clear span: 2,700 mm Max. load per pair of beams: 1,500 kg, with evenly distributed load 02x Safety pins, used Version: Fully galvanized For securing the longitudinal beams against unintentional lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping of this item is required, this will incur additional costs, which can be requested from us depending on the delivery location and scope.

Condition: good (used), The scope of delivery includes: Bdsdji A Ik Iepfx Amned 1x mounting bracket, used Surface: hot-dip galvanized Weight: 2.26 kg | piece Mounting plate: 100 x 120 x 10 mm (with 4 round holes, diameter 10 mm) Mounting flange: 120 x 140 x 10 mm (1 elongated hole, 62 x 15 mm)

Condition: good (used), The scope of delivery includes: 1x used pallet rack beam Material color: orange IPE profile: 100 x 55 mm Bracket: 5 holes Clear width: approx. 2,700 mm Per bracket: 5 holes Hole spacing: approx. 50 mm Hole diameter: approx. 11 mm 1x set of fastening materials consisting of: 10x M10 screws Bedpfx Ameibzgxsnodd 10x nuts 10x washers

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) Bdedpfxsxt Hn Ss Amned The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: good (used), Busch Vacuum pumps Bdodpfjqnvbqex Amnod Three vac pumps, models: RA0255 / WV0500 / RA0250, can be bough as a package or individually

Condition: refurbished (used), RA250D oxygen version, oil-free, assembled and filled with Fomblin. Completely overhauled, 0.5 mbar, 250 m³/h, available from stock. Bodpfx Amod R Trnenjdd We currently have several oxygen vacuum pumps in stock.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 550 kg, total length: 1,737 mm, total width: 861 mm, total height: 735 mm, volume flow: 756 m³/h, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 960 rpm, warranty duration: 12 months, protection type (IP code): IP55, Rotary vane vacuum pump in oil bath. Marpa Vacuum brand pump Pump completely new. 12 months warranty. Nominal flow: 630 m3 / h at 50Hz. Final vacuum: 0.1 mbar abs. Any doubts, do not hesitate to contact us. Bjdpoftzuwefx Amnodd

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 218 kg, total length: 962 mm, total width: 563 mm, total height: 420 mm, volume flow: 360 m³/h, power: 75 kW (101.97 HP), input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,720 rpm, warranty duration: 12 months, protection type (IP code): IP55, rotational speed (min.): 1,420 rpm, Rotary vane vacuum pump in oil bath. Available in stock. Completely new. 12 months warranty. Model: Marpa Vacuum MV 0300E Nominal flow: 300 m3 / h at 50Hz. End vacuum: 0,1 mbar abs. Motor power: 7,5 Kw Any clarification, do not hesitate to contact us. Bedpfx Ameftzv Ujnsdd

Condition: excellent (used), For sale: professional ORION milling toolholder – German quality and precision. • Type SK40 Ø10-100 (Weldon) • Standard DIN 69871 AD/B – spindle-through coolant • Total length 100 mm • Tool clamping for Ø10 mm (side screw) • Includes tool – milling cutter / drill bit (visible in photo) • Very good condition, used, fully functional. ORION toolholders are an ideal solution for CNC machining centres and milling machines with SK40 taper. Bjdsxcgytepfx Amnsdd

Condition: excellent (used), Year of construction: 2009, volume flow: 400 m³/h, Technical data: Bsdpfxsyldhbo Amnodd Product number COBRA NC 0400 Year of manufacture 2009 Motor power 9 kW Capacity 1000 m3/h Max. vacuum 0.1 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 500 kg Dimensions [H x L x W] 1111 x 781 x 660 mm The pump achieves a vacuum of 0.1 mbar, as confirmed by a sensor reading in the video below. Pump and motor are water-cooled After service New oil New refrigerant