Used Pelletmaker Pm 22 E for sale (74,008)

Condition: used, functionality: fully functional, input voltage: 400 V, total width: 850 mm, total length: 1,980 mm, total height: 1,325 mm, - Standard internal memory with 37 programs, each with a maximum of 20 stages - Mechanical height adjustment of the bowl - Wide range of bowl height adjustment, allowing the bowl to be removed without removing the tool - Precise recipe preparation thanks to digital time and speed indicators and automatic electronic shut-off - Automatic, computer-controlled start-up program protects the tool and machine Fodsz Inntjpfx Ap Dogh - Automatic, slow lowering of the tool while the bowl rises - Excellent safety with two-hand operation - Protective cover made of impact-resistant plexiglass; optionally available in stainless steel or as a safety guard - With protective housing - Easy to move thanks to its low weight and compact dimensions - LED for bowl illumination - Quick-change system for tools - Easy to clean, particularly quiet - GS safety mark for reliable safety

Condition: used, Weinig Unimat 22E automatic planing and moulding machine for four-sided planing and profiling of timber, featuring a grooved bed for short and curved workpieces, a mobile spindle for variable widths and a long dressing table. Technical data: - Spindles: 6 - Spindle 1: Bottom (5.5 kW) / 40 mm / 6,000 rpm Fgjdpfxjzrxz Us Ap Dsh - Spindle 2: Right (4 kW) / 40 mm / 6,000 rpm - Spindle 3: Left (5.5 kW) / 40 mm / 6,000 rpm - Spindle 4: Right (5.5 kW) / 40 mm / 6,000 rpm - Spindle 5: Top (7.5 kW) / 40 mm / 6,000 rpm - Spindle 6: Bottom (4 kW) / 40 mm / 6,000 rpm - Feed: 5.5 kW / / 6–36 m/min - Working width: 220 mm - Working height: 120 mm - Grooved bed: Yes - Mobile spindle: Yes

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 3,689 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: 1-pedal control (conversion to 2-pedal possible) Condition: Refurbished without warranty Technical Condition: Good Front tire type: Super elastic Fgedpfxjz Iumie Ap Dsh Front tire size: 18x7-8 Front tire condition: 60 - 80% Rear tire type: Super elastic Rear tire size: 15x4-5-8 Rear tire condition: 60 - 80% Battery voltage: 48V Battery capacity: 500Ah Battery manufacturer: Hawker Battery type: PzS Battery year: 2022 Battery condition: 80 - 100% Description: Delivered with new FEM 4.004 inspection, including inspection record Sideshift, integrated sideshift, 4th valve free up to fork carriage 3rd valve, 4th valve, rear work light, front work light, roof cover, front windshield, full free lift, single pedal, Front windshield (without wiper)

Condition: like new (used), Year of construction: 2018, operating hours: 6,472 h, load capacity: 2,000 kg, lifting height: 4,650 mm, fuel type: electric, mast type: triplex, construction height: 2,130 mm, Manufacturer + model: LINDE E 20 L - 386 / 02 evo * EX * Proplan 2GD / Zone 1-21-22 * Mast: 3F4650 ID: 26087.5931 Category: Used Mast: 3F4650 Lowered height: 2130 mm Lifting height: 4650 mm Capacity: 2000 kg Year: 2018 Hours: 6472 hours Capacity: Complete NEW * 48v / 625ah * Manufactured 02/2026 Options: * EX * Proplan !!!!! System / Certificate = INERIS 08 ATEX 3022 X Type = Cat 2G (permitted in ZONE 1 & 2) Gas group = IIB Temperature class = T4 Fgodezv R Hwopfx Ap Djh Type = Cat 2D (permitted in ZONE 21 & 22 - Dust) Temperature class = T 135 *C - IP 6X Equipped with: - CONTAINER specifications!! - Joystick control for forward and reverse - Triplex FFL mast - Headlights front and rear - Flashing beacon - Blue spot - LOW cabin < 2000 MM!!!

Condition: ready for operation (used), Year of construction: 2001, PM 74-2 2001 Year Fedpfszb Nxksx Ap Dsgh Straight 22 mil impressions Easy plate Alcolor Dampening with Technotrans Grafix Alfatronic 200 powder Gear free of damages Tools and Books Brand new rollers

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 719131, Heidelberg – GTO 52-1 Number of copies produced 8.350.000 Max-Sheet Size 360 x 520 mm (14.17 x 20.47 in) Max.printing Speed 8000 /h Fedez Ny Dwspfx Ap Dsgh Dampening rollers –Direct Dampening Continuous-1 Ink Fountain-Laser slit blade Electric equipment- 50Hz 380 V Electromechanical and ultrasonic double-sheet detectors Powder spray-WEKO T6 Circulation and cooling -Technotrans Alfa DS Availability immediately

Condition: good (used), Scherer Feinbau PM 1 FZ precision lathe, finishing lathe, lathe similar to Weiler, with extensive accessories as shown in the pictures. Equipment: - Hand lever cross slide with Multifix quick-change system design - Collet chuck with draw-in collets Technical data: - Spindle bore: - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Center distance: 160 mm - Largest diameter over bed: 220 mm Accessories: Fedpfx Asz Ip Risp Dsgh Draw-in collets 359 E K 23 as shown in the pictures. Shipping by arrangement.

Condition: good (used), Max. threading performance: metric thread, brass M33, cast iron M16, steel M14, including accessories. Fgedjibmn Eopfx Ap Doh

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: pm740725, color channels: 4, counter reading (color): 35,77,88,902, Equipment: documentation/manual, machine is in a good condition. we are shortage of space and so we took some photos and videos before we moved machine to storage. in case of real interest we can reinstall machine for customer for test. if interested i can send video of machine also. Fgsdoz A U Dqopfx Ap Djh

Condition: like new (used), Year of construction: 2019, operating hours: 4,788 h, load capacity: 1,600 kg, lifting height: 5,450 mm, fuel type: electric, mast type: triplex, construction height: 2,480 mm, Manufacturer + model: LINDE E 16 PL - 386 / 02 evo * EX * Proplan 2GD / Zone 1-21-22 *Mast: 3F5450 Fgedpfx Apezv R Ihj Djh ID: 26084.5626 Category: Used Mast: 3F5450 Lowered height: 2480 mm Lifting height: 5450 mm Capacity: 1600 kg Year: 2019 Hours: 4788 hours Capacity: Complete NEW * 48v / 625ah * Manufactured 05/2026 Options: * EX * Proplan !!!!! System / Certificate = INERIS 08 ATEX 3022 X Type = Cat 2G (allowed in ZONE 1 & 2) Gas group = IIB Temperature class = T4 Type = Cat 2D (allowed in ZONE 21 & 22 - Dust) Gas group = IIIB Temperature class = T 135 *Equipped with: - Joystick control for forward and reverse - Triplex FFL mast - Complete street lighting - Roof window - Spotlights front and rear - New type display with touchscreen !!!

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: AA10001621, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 3,086 mm, travel distance Y-axis: 2,185 mm, travel distance Z-axis: 150 mm, workpiece height (max.): 150 mm, number of slots in tool magazine: 20, controller manufacturer: SCM, overall weight: 2,550 kg, feed length X-axis: 3,770 mm, feed length Y-axis: 2,585 mm, feed length Z-axis: 250 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 6 m/min, spindle motor power: 9,500 W, nominal power (apparent): 29 kVA, number of spindles: 1, rapid traverse Z-axis: 15 m/min, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rotational speed (max.): 24,000 rpm, rotational speed (min.): 1,500 rpm, spindle speed (max.): 24,000 rpm, spindle speed (min.): 1,500 rpm, tool diameter: 160 mm, tool length: 160 mm, distance between spindles: 32 mm, Equipment: chip conveyor, documentation/manual, SCM MORBIDELLI N100 22-31 C – CNC Milling and Drilling Machining Center Brand and Model: SCM MORBIDELLI N100 22-31 C Serial Number: AA10001621 Year of Production: 2019 Condition: Excellent Location: Croatia Technical Specifications: Working Area (X x Y x Z): 3086 x 2185 x 150 mm Vacuum Table: High Efficiency Multipurpose Aluminum Table (HE) Vertical Drilling Head: 12 Spindles (7X / 5Y), 8000 rpm Horizontal Drilling: 3 Units (2X + 1Y), 8000 rpm Integrated Saw (X-Axis): Ø125 mm, 10000 rpm Main Milling Spindle: 9.5 kW (13 HP), HSK 63F, 24000 rpm Tool changer: 20 positions (19 at the rear + 1 in the cabin for quick change) Vacuum pumps: 2 x 250/300 m³/h Dust extraction: 5300 m³/h + 3400 m³/h for unloading pusher, Ø250 mm Machine weight: approx. 2550 kg Total installed power: 23–28.5 kW Control and software: Control via Xilog Maestro system + Eye-M PRO console Industrial computer with Windows Embedded 7 operating system 21.5" touch screen Included nesting optimization module and additional software licenses Built-in accessories: Fjdpswtdt Uefx Ap Degh 1. Automatic tool length measuring device 2. TECPAD remote control with 7” touch screen 3. Lateral pick-up for additional tools 4. F18L doweling machine with RO-AX system 5. Two-field positioning for work in two working zones (A + D) 6. Automatic central lubrication 7. Air blowing and micro-lubrication system for processing demanding materials (e.g. aluminum panels) 8. Vacuum cup set 9. Automated unloading system: pusher + conveyor belt 10. Predisposition for automatic loading device 11. Interpolating vector axis with digital control for the 4th axis The machine has been used exclusively in professional conditions, regularly maintained and fully functional. Ready for immediate use in industrial production.

Condition: excellent (used), Year of construction: 2017, operating hours: 1,600 h, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Elektrisch Hersteller: DR. BOY Typ: 100E Typ: 552 Baujahr: 2017 Schließkraft: 100 Tonnen Holmabstand (hxv) 430 x 360 mm Einbauhöhe MIN. 250 mm Schnecken DN 1: 42 mm Fsdpezxrc Ssfx Ap Djgh Spritzteilgewicht 1: 157,6 g/PS Schnecken DN 2: 24 mm Spritzteilgewicht 2: 39,1 g/PS Steuerung: PROCAN ALPHA Ausstattung: 1 x Kernzug Hochschleißfeste Plastifizierungseinheit Steuerung Pneumatische Nadelverschlußdüse Trockner, Hersteller: FARRAG, Baujahr: 2016

Condition: good (used), Year of construction: 1998, functionality: fully functional, The machine can fill still drinks, water, juices, wine and carbonated drinks Fodpjvtgaxjfx Ap Djgh The machine is isobaric

Condition: new, Year of construction: 2023, functionality: fully functional, input frequency: 50 Hz, Make: Pramac GBW 22 P DDS Noise protection hood: 66 dB(A) 7m Continuous 3-phase power: 20.12 kVA / 16.10 kW Maximum 3-phase power: 22 kVA / 17.6 kW Voltage: 230 / 400 Volt Fgedpfx Apeq A T Dws Djh Frequency: 50 Hz Phases: 3 Diesel engine: Perkins 404J-22G Exhaust stage: STAGE V Cooling system: Water Cylinders: 4 in series Displacement: 2220 cm³ Intake: Normal Engine speed: 1500 rpm Engine control: Mechanical Consumption at 3/4 load: 4.0 liters Consumption at full load: 5.74 l/h Fuel tank capacity: 51 l Generator: MeccAlte ECP28-M4 C Type: Brushless Number of poles: 4 Control: Electronic (AVR control) Digital control ACP Sockets with FI: 1x 32A - 400V / 5-pole Dimensions and weight: Length: 1645 mm Width: 870 mm Height: 1060 mm Tank capacity: 51 liters Weight, dry: approx. 546 kg Central crane loading eye Forklift can be driven under Glow pins Engine preheating PHS Battery charge retention

Condition: excellent (used), Year of construction: 2006, We sell the Mambranpress for kitchen doors, doors, or door frames, etc. Producer ORMA Macchine, Model: PM Air System 25/14 Fsdpjzmnyiefx Ap Dogh Year 2006. Area 2500 x 1400mm. / 1 Table PIN system for edge binding. Possible to see at work. Documentation included

Condition: new, Code: N0235 Brand: CASADEI INDUSTRIA Model: E 350 PM Automatic edge bander with hot melt (EVA) glue pot, chain panel feeding and pre-milling Maximum finishing quality Chain feeding system Pre-milling (E350PM) 3 free spaces for finishing units High performance 7 m/min feed speed 45 mm panel height 2 mm edge coils Minimum space occupied 2,30 m length Easy to use Unit settings with a piece of edge Easy and intuitive use of machine 3 position infeed fence 0-1-2 mm (according to edge thickness) Chain panel feeding Firm grip of panel guaranteed by special non-slip rubber on the pads. Linear feeding ensured by double sliding tracks with a special geometric profile accurately machined with precision to a hundredth of a millimetre. Long lasting monolithic frame fully processed only in one cycle on a CNC machining centre. Pressure bar with locking levers Top pressure bar with a double row of rubber wheels mounted on bearings, with locking levers and position indicator Pre-milling INVISIBLE GLUEING LINE DIAMOND tools Ø= 60mm H= 54mm HF motors 200 Hz – 12.000 rpm – 0.75 kW (each) Dedicated suction system and blower for panel cleaning before glueing Fgedpfsyvt Exox Ap Doh Glueing unit PERFECT GLUEING, QUICK AND PRACTICAL SET-UPS 6 heating elements to guarantee uniform glue temperature. Motorized glue spreading roller with an internal electrical heating element. Inferior Teflon-coated glue pot to permit complete and rapid cleaning. Pneumatic shear, pressure rollers, edge feeding system DETAILS THAT MAKE THE DIFFERENCE Edge feeding synchronized with panel being processed Oscillatory movement of the cutting shear unit to guarantee perfect glueing Quick and precise positioning of the pressure rollers. The system “reads” the edge thickness, making mistakes impossible! Trimming cut-off PERFORMANCE AND VERSATILITY End trims front and rear excess edge Working cycle controlled by PLC Exclusion from control panel (PLC) Flush trimming unit Flush trimming unit with vertical disc copiers as standard Possibility of processing for edges from 0.4-2 mm Anti-adherence / release agent spraying unit (Opt.) INSTANT PERFECT CLEANING Spray function controlled by PLC 2 sprayers (lower and upper) and liquid tank Infrared lamp (Opt.) TO GUARANTEE THE BEST GLUEING CONDITION Creates the best conditions for perfect glueing Heats panels and removes all traces of dampness.

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: 09623212, Soundproof housing Motor power: 3 kW Dimensions of the grinding chamber: 220 x 170 mm Number of rotor blades: 3 Number of stator blades: 2 Rotor diameter: 170 mm Rotational speed: 270 rpm (at 50 Hz) Sieve hole diameter: 5 mm Fedpfxozimw Ej Ap Djgh The mill is new and has never been used! PRICE REDUCED FROM 5950 TO 5350 EUR!!!

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 5135, EUROMAC STX FLEX 6 1500/22-2500 CNC punching / nibbling machine. Fgedpfjz Aarcsx Ap Doh Technical data: - Year of construction: 2018 - Serial number: 5135 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 4789, EUROMAC STX FLEX 12 1500/22-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2016 - Serial number: 4789 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request. Fgodpfx Apsz Aalvs Deh

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 5290, EUROMAC STX FLEX 12 1500/22-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2020 Fsdpoz Aawxefx Ap Djgh - Serial number: 5290 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, DGUV certified until: 08/2027, total width: 680 mm, total length: 970 mm, total height: 1,700 mm, input frequency: 50 Hz, year of last overhaul: 2026, electrical fuse: 16 A, power: 4 kW (5.44 HP), Planetarymixer Model: Rego PM 40 E mixer Power adjustment stepless Intervention - protective grid LED control with timer 1 stainless steel kettle 40 liters 1 broom, 1 flat beater electric boiler lift Stationary machine with tank car DGUV V3 tested Connection 400V, 2.3 kW, 16A-CEE plug Dimensions: 970 x 680 x 1700 mm, DxWxH Used machine overhauled with 6 months warranty Fjdpeh H Svujfx Ap Degh Visit our large sales warehouse with over 400 bakery machines!

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min Fjdpex Aqdcofx Ap Djgh 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: excellent (used), Year of construction: 2006, Technical specifications: Working width: 2100 mm Bending capacity: 28.0 mm Springback: 22.0 mm CNC control Diameter of upper roller: 350 mm Diameter of middle roller: 330 mm Diameter of side rollers: 240 mm Hardened rollers Conical bending unit by inclining the two side rollers Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (length x width x height): approx. 3600 x 1500 x 1500 mm Weight: approx. 14.5 tons Fgodpfex Dtt Asx Ap Doh The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2007, +Version Heidelberg Autoplate (Automatic Plate Changing System) Ink Roller Washing Device Baldwin Cooling Prinect Classic Center Control Station Fjdpfx Ajw A Rgyep Dogh Powder Sprayer Alcolor Dampening Impression Account: 115 Mio.

Year of construction: 1985, condition: used, functionality: fully functional, PM 5 PAPER MACHINE + STOCK PREPARATION / DEINKING PLANT + GOEBEL U16M !contact for full details and photos! Package sale of an integrated paper production installation in Hainsberg, Germany. The package includes the PM 5 paper machine, its associated stock preparation and deinking plant, and a Goebel U16M roll slitter rewinder. PM 5 was originally built in 1985 and modernised several times. Main sections: approach-flow system – PAMA; headbox – Voith; Fourdrinier section – PAMA; top-wire former – Valmet; press section – PAMA; dryer sections – PAMA; SpeedFlow system – Voith; after-dryer section, calender and Pope reel – PAMA. Reported modernisations: Valmet top-wire former (1994); approach-flow system expansion/modernisation (2002–2003); MAP quality-control system (2006); Voith SpeedFlow (2009); automatic tail cutter (2025). PM 5 specifications: • Working width: approx. 2,730 mm; trimmed width: approx. 2,640 mm • Maximum speed: up to 600 m/min • Maximum gross capacity: up to 150 tonnes/day • Basis-weight range: approx. 45–130 g/m² • Grades produced include office, copy, writing, printing, envelope and newsprint papers • Installed electrical power: approx. 2.5 MW • Steam consumption: up to approx. 16 tonnes/hour Stock preparation/deinking plant: • Normal capacity: approx. 125 tonnes/day; up to approx. 140 tonnes/day under suitable raw-material and process conditions • Essential components listed in the available technical documentation are reported to remain installed on site Fedsz Hvmhjpfx Ap Dogh • Older Siemens S5 and Teleperm control and automation system Goebel U16M: built in 2005, machine no. 053-9031. Working width 2,800 mm; maximum speed 2,000 m/min; maximum unwind diameter 2,000 mm; maximum rewind diameter 1,500 mm; minimum cutting width 150 mm. Available accessories include winding shafts and an edge-trim extraction system with shredder and flat turbo disintegrator. Operating status: Production stopped on 23 January 2026. According to the seller, PM 5 and the stock preparation/deinking plant were operating until the controlled shutdown. The Goebel U16M was also reported operational until that date, with no significant functional faults known. None of the equipment has been restarted or tested under production conditions since shutdown. Current functionality has not been verified. Fampa Roller – offered as is (brake-control system defective; out of operation since end of 2024) RPM LAMB – offered as remaining equipment/components (incomplete, partly dismantled; out of operation since 2025) Maximum capacities depend on paper grade, raw material and operating conditions. Inspection by appointment. Price on request.