Used Cewe Punching Unit for sale (32,986)

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Work area 3050 x 1550 mm - Drives with maintenance-free three-phase motors - Stable, easily accessible C-frame - Coordinate guidance - Linear magazine with 25 positions for clamping dies and tools - Follow-up device with programmable pressure clamp - Flap for stamped parts 500 x 500 mm incl. sensor - 2 scrap containers (=> not included with part conveyor belts) - Foot pedal for die closing - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axis - Ejection cylinder for laser parts - Fast flap for laser parts 500x500 mm incl. sensor - Adjustable laser cutting support - Slag cone detection TRUMPF Laser - Laser TruFlow 2700 incl. LensLine and optimized standby mode - High-frequency excitation - Closed beam guidance - Fine filtration of compressed air for beam pipe ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device (UTI) - LensLine with condition monitoring - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure clamp position - Tool length compensation - Scrap extraction - Calculation of filling level in the punching console - Stroke counter for punches - Spray lubrication for punches - Level monitoring for tool lubrication Bedpfjzv Twxjx Abtedg Control System - Open control system based on Bosch Rexroth IntraMotion MTX - Integrated technology data - 160 GB hard drive capacity - External control panel with 15" TFT touchscreen - Programmable cutting gas pressure - Teleservice interface via the internet - Automatic shutdown with wake-up function - Production plan Data Transfer - USB interface - RJ45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives - Warping detection - Protection against stray radiation - Compact dust extraction system Extended Standard Equipment - Hydraulic clamping die (4 pieces) - Ball tables (=> not included with brush tables) - Chip container (=> not included with chip conveyor) - Cooling unit (water-air) + Laser TruFlow 3200 incl. LensLine and optimized standby mode + MultiTool function + Thread forming function + MultiShear function + Roll technology function + Softpunch function + StripLine function + Active die + Height-adjustable clamping die (4 pieces) + Follow-up cylinder - Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading assistance SheetMaster N0140A0054 automation: - Suction frame with 36 suction cups (y-axis = 400 mm) - Movable suction bars (v-axis = 170 mm) - Peeling suction cup - Vacuum sensor - Sheet thickness gauge for double-sheet detection - Central lubrication - TRUMPF control system based on Rexroth IndraMotion MTX - Automatic die closing of the machine + Extended guide rail + Table extension (brush design) + Fixed additional support table on the left (brush design) + Automatically adjustable additional support table on the right (brush design) + Large C-frame for processing oversized parts + Parallel loading and unloading of the SheetMaster during main processing time + Unloading monitoring + Lowerable GripMaster for large formats (3000 x 1500mm) + Scissor lift table (3000 x 1500)

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 25,379 h, For sale: professional CNC punching machine TRUMPF TruPunch 3000, manufactured in 2014. The machine is in very good technical and visual condition. The total operating time is only about 25,379 operating hours, which is a low number of operating hours for industrial TRUMPF machines of this age. The machine is sold together with punching tools. Bdjdpfxezxxhns Abtjg Currently, the unit is fully connected to the power supply, so before purchasing, you can inspect the machine in operation, check its functionality, and perform a test punching operation. Key information: Manufacturer: TRUMPF Model: TruPunch 3000 Year of manufacture: 2014 Type: Electric CNC punching machine Working table: 3000 x 1500 mm Capacity: 18T Operating time: ~25,379 operating hours Comes with punching tools If you have any further questions, we will be happy to answer them.

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Bjdpfx Asd Swtaobtjdg Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: A/18031, SCHULER - MSP2-800- 4,5x1,8-400 Bedpfxszxqz To Abtjdg Kapasite: 800 ton Hava Tüketimi: 30 m³/saat Güç: 296 kW Üst Tabla Ebatları: 4500 mm x 1700 mm Alt Tabla Ebatları: 4500 mm x 1800 mm Pres Yükseklik: 7,5 m Pres En: 6,50 m Pres Genişlik: 4,50 m Dakikadaki Vuruş Sayısı(maksimum): 70 spm Çalışma Reglajı: 300 Kurs Değeri: 80-360 Used machine

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester Bodpfoyc H I Sox Abtedg • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1984, machine/vehicle number: 12.873, throat depth: 300 mm, punching force: 100 t, overall weight: 2,250 kg, cutting width (max.): 600 mm, TECHNICAL DETAILS Punching force: 100 t Stroke: 300 mm Bdodpfjzxdqujx Abtjg Punching speed: 28 strokes/min Shearing width: 250 mm Max. sheet thickness: 16 mm Round material cutting capacity: 50 mm Cutting width: 600 mm Max. sheet thickness: 20 mm MACHINE DETAILS Control: Conventional Drive: Hydraulic Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,250 x 2,100 mm Weight: 2,250 kg Shipping packages: 1 unit

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 9941 / 09/20, inner dimension width: 1,100 mm, inner dimension length: 660 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! The system will be available from October 2026! TECHNICAL DETAILS Working area (H x W x D): 550 / 800 × 1,100 × 660 mm Bodpfxszx S Ius Abtsdg MACHINE DETAILS Air pressure: up to 8 bar Dimensions & Weight External dimensions: 1,785 × 1,250 × 1,250 mm Other dimensions: 1,300 × 1,300 × 1,700 mm Weight: approx. 350 kg Working floor load: max. 350 kg Voltage supply: 230 / 400 V, PE/N Mains frequency: 50 Hz Fuse rating: 3 × C16 A Rated current L1: 0.8 A Rated current L2: 0.7 A Rated current L3: 0.6 A EQUIPMENT Operating manual CE/conformity documents

Condition: new, Year of construction: 2026, -Smart Safety Clean Air Enhanced Efficiency. -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source. -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment. Bdedpfxovg U Dxe Abtog Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety...

Condition: good (used), Horizon ED-40 Standing Delivery Unit Bdedpfxozurzae Abteg Manufactured by Horizon, Japan. Can be connected to any Horizon folding machine, but also works with Heidelberg, Herzog Heymann, MBO, etc. The device also operates independently of the folding machine. Infinitely variable delivery speed adjustment. Height adjustment. Package counter with shifter. Format: min 20mm max 110mm

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 255100, punching force: 20 t, total height: 2,150 mm, total width: 2,900 mm, total length: 4,900 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, working range: 1,270 mm, type of input current: three-phase, travel distance X-axis: 1,270 mm, travel distance Y-axis: 1,270 mm, workpiece weight (max.): 75 kg, overall weight: 11,000 kg, input current: 40 A, input frequency: 50 Hz, table load: 75 kg, feed rate X-axis: 82,000 m/min, feed rate Y-axis: 82,000 m/min, feed rate Z-axis: 82,000 m/min, travel speed (max.): 82,000 mm/min, input voltage: 400 V, AMADA EUROPE 255 CNC Punching Machine CNC turret punching machine AMADA EUROPE 255, year 1999, equipped with a GE Fanuc Series 18i-P CNC control. The machine is installed and available for inspection and demonstration while powered on, by appointment. Technical specifications: Manufacturer: AMADA EUROPE Model: EUROPE 255 Year of manufacture: 1999 CNC control: GE Fanuc Series 18i-P Punching force: 200 kN (20 t) Working range X x Y: 1,270 x 1,270 mm Maximum sheet thickness: 3 mm Table load: 75 kg Turret: 27 stations Maximum positioning speed: 82 m/min Bsdpjzw Ui Eefx Abtodg Power supply: 400 V / 50 Hz / 3-phase Nominal current: 40 A Installed power: 29 kW Machine dimensions: approx. 4,900 x 2,900 x 2,150 mm Machine weight: approx. 11,000 kg CE marked The machine is currently installed and can be inspected while powered on. Available immediately. Inspection by appointment. Location: Greece

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, laser power: 3,200 W, sheet thickness (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Combined punching/laser operation: 3,000 mm × 1,500 mm Punching operation: 3,000 mm × 1,500 mm Laser operation: 3,000 mm × 1,500 mm Working area without repositioning: Large format Sheet metal thickness, structural steel max.: 8 mm Sheet metal thickness, stainless steel max.: 8 mm Sheet metal thickness, aluminum max.: 4 mm Maximum punching force: 220 kN Maximum punching speed (at 1 mm stroke): 900 strokes/min Maximum marking speed: approx. 2,800 strokes/min Maximum axis speed: 108 m/min Axis speed: simultaneous in X and Y axes Tool magazine: Linear magazine with multi-tools Maximum number of multi-tools: 18 Clamps: 3 Tool positions: 180 MACHINE DETAILS Laser source: Trumpf TruFlow 3200 CO₂ laser Bsdpfx Aozyay Ijbtedg Laser power: 3,200 W Operating hours (as shown in the photo) Beam on hours: 12,716 h Laser on hours: 73,705 h EQUIPMENT SheetMaster with two large-format tables Automatic scrap sheet disposal onto lifting table

Condition: good (used), Year of construction: 2010, total length: 1,600 mm, total width: 1,900 mm, total height: 3,200 mm, overall weight: 600 kg, For Sale: Dosing unit / flour discharge point from Kaak / Silowacht Brand: Kaak / Silowacht Type: flour discharge point Year of construction: 2010 The height is adjustable, the total height is approximately 3.20 meters. The flour discharge point can be mounted on a pole / column. Bdjdpfjzv S Nmox Abteg Diameter of the lower filling point: 99 cm Maximum weight of flour: 100 KG Included: - weighing hopper for flour / meal - load cells - water weighing hopper unit - filter unit - pneumatic valves - level gauges - liquid yeast meter, valve and connection - Siemens S7-1500 (Siemens control system) - piping, if required It is possible to inspect this machine on-site. If you have any questions or comments, please feel free to contact us.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2015101, Size 60 x 76 cm, die-cutting machine with automatic registration and camera system. Bdsdpozxf Hdefx Abtog

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, overall weight: 70 kg, input voltage: 400 V, input frequency: 50 Hz, power: 27 kW (36.71 HP), temperature: 90 °C, GWK CS90 t36 Tool tempering furnace, 2018, heating: 27 kW. Bodozab Syepfx Abtjdg

Year of construction: 2012, condition: excellent (used), Years: 1x 2012 1x 2011 1x 2010 1x 2006 2x 2008 Bedpfx Aezw Dz Rebtjdg (Is possible to buy 6 pieces)

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Tool-temp TT-137 Tool Tempering Unit, 2018, heating: 12 kW, temperature: 140°C Stock: 3 units Bdjdpfozab S Hjx Abtsg

Condition: used, Hydraulic power unit, Bosch Rexroth complete industrial hydraulic power pack with 15 kW Siemens motor, HYDAC oil cooler and WOERNER control system, Used Machine MAIN MOTOR AND PUMPS: Main drive motor: SIEMENS 15 kW (3~ Mot. 1LA7166-4AA61, 400/690 V, 1460 rpm, IP55, 99 kg) Rexroth main pump: A10VSO 28 DFLR/31R-PPA12N00 (250 bar, Vg = 28 cm³/rev) Rexroth 2nd pump: PGH5-21/080RE11VE4 (80 cm³/rev, internal gear pump) Rexroth 3rd pump: PGH2-22/006RR07VU2 COOLING AND FILTRATION: Oil cooler unit: HYDAC SA Cooling Systems (SCA 3L/40/2.0/M/A/1, max. 6 bar) Cooling circuit pump: HYDAC SYSTEM KFZP-3+4/3.0/P/90/40 (G 1 1/4") Cooling fan motor: A.O. SMITH 5.5 kW (400 V, IP55) Filter housing: REXROTH pressure filter housing (25 bar, 16.7 litres) CONTROL SYSTEM AND TANK: Temperature controller and display: WOERNER KTR-B/3/V300/T5/T5/TA (IP65) Hydraulic tank: Robust steel hydraulic oil tank with oil level indicator and inspection/cleaning opening. OVERALL DIMENSIONS: Width: 1700 mm Bedpozxfnzsfx Abtjdg Depth: 1300 mm Height: 1650 mm

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min Bdedpszx Rq Iefx Abtog - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: like new (used), Year of construction: 2022, liter capacity 45L l/min coolant R410A 1 kg pressure 1.2-4.4 bar total power requirement 4,10 kW weight of the machine ca. 130 kg The Pfannenberg EB 95 is an industrial oil chiller with a cooling capacity of 9.5 kW, R410A refrigerant, a robust operating range (15–66 °C), high reliability, and clear electrical safety parameters. The ebm-papst component is an energy-efficient fan/motor compliant with ErP2015. > Unit Type: Industrial Chiller > Model: EB 95 > Year of Manufacture: 2022 > Manufacturer: DASSI SRL (for Pfannenberg) > Color: RAL 7035 > PED Category: I > Wiring Diagram: 70010-534 > Cooling capacity: 9.5 kW > Refrigerant: R410A > Charge: 1.0 kg > Fluid group: 2 > Max. pressure (PS): 42 bar > Min. pressure: 2.4 bar > Medium: Oil ISO VG 22–68 > Fluid temperature: 13–35 °C > Flow rate: 45 l/min nominal Bdodpfxjzwxybe Abtjg > Nominal pressure: 3 bar (min 1.2 / max 4.4 bar) > Ambient temperature: 15–66 °C > Max. relative humidity: 80% RH > Sound pressure: 72 dB(A) @ 1 m / 60 Hz

Condition: excellent (used), CATALOGUE NUMBER 8046 Technical data: - max width of workpiece 900mm - max height of workpiece 160mm 2 units: 1) ribbed rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above: - rubber roller, slip roller I unit Bdodpjzx Rzyofx Abtsg - 2x rubber roller, slip roller II unit - slip roller, rubber roller, smooth – from below: - conveyor belt - pneumatic belt oscillation - 2 types of feed speed 0.55kW - electric table lifting - main motor 7.5kW - working pressure 6-8 bar - diameter of dust extraction nozzle 2x160mm - dimensions L/W/H 1300x1500x1950mm - weight 1100kg Advantages: – Italian production, – unpainted – used grinder, very good condition Net price: 28900 PLN Net price: 6890 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: used, Year of construction: 2011, machine/vehicle number: IntNr231315, Technical Data – used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2011 Airflow rate approx. 500 m³/h Motor power approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Bedpfxezx Rv Ds Abtsdg Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W×D×H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional HEPA H13) Filtration efficiency 99% at ≥ 1–2 µm (F9), optionally HEPA 99.95% at ≥ 0.1 µm Noise level approx. 65 dB (WS2 mod. similar) Accessories & Features • Compact design for direct installation on or beside CNC machines • Stand for extraction • Three-stage cleaning for effective oil and coolant mist separation • Cartridge filter can be retrofitted with HEPA kit • Easy maintenance, low noise operation, and long-life filter elements Subject to technical changes, errors and prior sale!

Condition: used, Industrial hydraulic power unit, Rexroth, Used Machine Manufacturer: Rexroth Drive Motor: Grundfos 3-phase electric motor (5.5 kW, 1420 rpm, 380 V / 13.6 A, IP54) Pressure Filter Unit: Rexroth MDFBNHC 60G10C1.0 industrial filter housing Hydraulic Accumulator: Integrated high-pressure hydraulic accumulator / gas accumulator Design: Robust steel hydraulic tank with oil level indicator, complete hydraulic piping system and pressure gauge. Control System: Incomplete condition! Bjdezxnr Nepfx Abtodg OVERALL DIMENSIONS: Width: 1210 mm Depth: 600 mm Height: 1360 mm

Condition: excellent (used), RETSCH ZM 200 Ultra Centrifugal Mill with DR 100 Feeder Manufacturer: RETSCH GmbH Type: ZM 200 Machine Type: Ultra Centrifugal Mill / Fine Grinding Mill Accessories: RETSCH DR 100 Feeder For sale is a used RETSCH ZM 200 Ultra Centrifugal Mill with RETSCH DR 100 Feeder and extensive accessories. The ZM 200 is designed for the fine grinding of sample material and is offered together with the DR 100 feeder shown in the images, various sieves, rotors, collection and feed components, and other accessories. Technical data: Manufacturer: RETSCH GmbH Model: ZM 200 Device type: Ultra Centrifugal Mill Power supply: 1~ 200–240 V / 50–60 Hz Power according to nameplate: 1,100 W Current consumption: 12 A Operation: digital control and display panel Interfaces: RS232 / RS485 Connection for DR 100 feeder CE marking Feeder: Manufacturer: RETSCH GmbH Type: DR 100 Device type: Feeder / Vibration Feeder Digital control and display panel Start/Stop operation Feed hopper and feed chute as shown in the images Dimensions: ZM 200 (L × W × H): 515 × 410 × 365 mm Equipment: RETSCH DR 100 Feeder Feed hopper Feed chute Rotor / grinding tool as shown in the images Various ring sieves / sieve inserts Collection container Filling and collection components Filter bag Various RETSCH spare parts and accessories Operating manual ZM 200 Operating manual DR 100 Other accessories as shown in the images Transport data: Dimensions ZM 200 (L × W × H): 515 × 410 × 365 mm Weight: not specified / not determined Transport or shipping possible by arrangement Condition: Used Device shown in operational state. Display and control panel shown in active state. Optical condition as shown in the images. Signs of wear and tear are present. Scope of delivery: 1 × RETSCH ZM 200 Ultra Centrifugal Mill 1 × RETSCH DR 100 Feeder Feed hopper and feed chute Rotor / grinding tool as shown in the images Various ring sieves / sieve inserts Collection container and filling components Filter bag Operating manual ZM 200 Bdedpfx Aozxqhyobtog Operating manual DR 100 Extensive accessories as shown in the images Availability: by arrangement. Scope of delivery as shown in the images. Subject to changes, errors and prior sale.

Condition: good (used), Year of construction: 2017, functionality: fully functional, X Working range max.: 2000 mm (without repositioning) Y Working range max.: 1250 mm Control: Bosch PNC-P Machine - C-frame - Coordinated guidance - Linear magazine with 15 positions for clamping jaws and tools - Hydraulic clamping jaws (2 pieces) - Drives with maintenance-free three-phase motors - Repositioning device with programmable retaining device - 1st stop pin (right, inside) - Dividing slide Punching head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable retaining device position - Tool length compensation - Spray lubrication for punch - Punch slug extraction - Forming function Control - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 15" TFT color screen - Integrated technology data - Teleservice interface via the internet - Automatic shutdown - Program management - Production plan Data transfer - USB interface - RJ45 network connection Bodpfx Abjzv Safjtjdg Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives Extended standard equipment - Ball tables - Chip container - Initial oil filling - Additional clamping jaw - Foot switch for start - Warping detection - Vibration-damped installation - 5 RTC cassettes with die plates

Condition: used, Year of construction: 1994, table length: 1,780 mm, table width: 1,250 mm, pressing force: 320 t, High-performance mechanical punching press with coil line for strip material processing in series production. Manufacturer: Kaiser Pressen Model: KSTU 3150-15 R Machine type: Punching press Year of manufacture: 1994 Press force: 3150 kN Drive type: Mechanical Stroke rate: 20 – 120 spm Ram stroke: 20 – 150 mm Ram adjustment: 150 mm Table area: 1780 x 1250 mm Ram area: 1500 x 1000 mm Shut height: 565 mm Max. tool weight: 3000 kg Strip width: 30 – 800 mm Strip thickness: 0.5 – 3 mm Max. strip thickness: 4 mm Strip entry height: 160 – 260 mm Strip speed: 4 – 30 m/min Straightening rolls: 9 pcs Feed accuracy: ± 0.1 mm Coil inner diameter: 508 mm Coil outer diameter: 1000 – 1500 mm Supply voltage: 3 x 400 V Air pressure: 5 bar Bedpfey Ndyaox Abtjdg Location: Radeberg