Beverage production machine

Reda STERILDOSE dosing unit

Condition: good (used), Year of construction: 1994, Fillerblock, make Nagema, type: Varifill 40/10K/10PP, for 12.000 bph, with 40 filling valves, with 10-head crown capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRW-bottles, direction: left->right, Siemens S5 control, built 1994 Gsdpfxon D Hm Se Anxjub L: 4.000 mm, W: 2.700 mm, H: 2.800 mm

Year of construction: 2026, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Guedpfx Anjv Sq S Njxjb Technical Information: • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless control of belt speed • User-friendly • Easy to clean • Rollable machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge

Condition: like new (used), functionality: fully functional, gearing type: automatic, fuel type: electric, color: green, operating hours: 1,000 h, NEW OFFER "BARGAIN" Aggregate crushing and screening plant; the unit includes: - Primary hopper: 70m³ - Secondary hopper: 80m³ - Hazemag vibrating pre-screen feeder, 30 HP motor - Rover pre-screen feeder with 8 HP motor - Guerrero jaw crusher 1000x800 with 100 HP motor - Hazemag impact crusher model APK-30 with 120 HP motor - Alli Charmets vibrating screen, single deck, 3m² effective screening area, 5 HP motor - 15 Tusa-Siem conveyor belts with integrated motors and gearboxes, various lengths and sizes - Electrical distribution cabins: 2.5 x 3m - Control cabin / control panel Transport: the complete plant requires approximately 6–8 trailers SPECIAL DEAL Gujdpfx Anjt N Iwtexsb

Condition: used, Year of construction: 2018, Overview  This vacuum evaporator was manufactured in 2018 by Italian manufacturer REDA. The machine is designed for gentle concentration of musts, juices, and other liquid products at low temperatures to preserve aromas and product quality. It is almost new and offered for sale as it was intended for a project that did not proceed. The system features an automated, CIP‑ready design. Technical data  Capacity: 100 L/h evaporation capacity at +22/+24 °C Application: Concentration of musts, juices, and liquid products Operating modes: Recirculation mode or direct concentration mode Max. concentration: 55–70 °Brix Daily output: 2,400 L evaporated / 24,000 L enriched to 10% Utilities: Electrical supply: 25 kW, 380 V / 3Ph / 50 Hz + PE Water: +12/+18 °C (low consumption) Compressed air: 6–8 bar Connections: DN40 DIN, 50 mm hoses Control system: PLC automation, IP65 control cabinet, digital temperature indicators Scope of Delivery  Vacuum evaporator | REDA | CM100 | 2018 | Complete AISI stainless-steel construction Evaporation chamber | Stainless steel, full inspection access Heat exchanger | AISI 316L tubular exchanger Vacuum pump | Liquid-ring system with cooling recirculation Refrigeration group | Heating 75,000 kcal/h, cooling 60,000 frig/h, 2 × 12.5 HP Copeland compressors Pumps | Stainless-steel centrifugal and mono volumetric discharge pump Vapor condenser | Stainless-steel surface condenser Instrumentation & tanks | Flowmeters, cold and hot water stainless-steel accumulation tanks Gsdpfx Aoykrdbonxeub

Condition: used, Year of construction: 2007, Used Filling Monoblock Cimec America The Used Filling Monoblock Cimec America model DPS 6/6/1C is an advanced isobaric bottling solution designed for the precise rinsing, filling, and capping of carbonated beverages. Engineered with industrial-grade stainless steel and based on a robust mechanical architecture, this monoblock is tailored for small to medium-sized beverage operations seeking reliability, hygiene, and consistent process control. This CIMEC monoblock integrates three essential stations into a compact, fully automatic system. The configuration includes a bottle rinsing unit, an isobaric filling carousel, and a crown capping station, all enclosed within stainless steel safety guards with transparent access doors for operational monitoring and safety compliance. Isobaric Filling Technology and Construction At the heart of the Used Filling Monoblock Cimec America is its isobaric filling carousel, specifically engineered for carbonated liquids such as beer, sparkling wine, kombucha, cider, and similar beverages requiring careful handling to preserve carbonation and minimize product loss. The filling station features stainless steel isobaric valves connected to a pressurized product tank, ensuring precise equalization between the internal bottle pressure and the product tank before the filling cycle begins. Gusdpfew Hr Awjx Anxsb The isobaric filling method is characterized by maintaining a constant counter-pressure using CO₂ or other inert gases. This technology allows the product to enter the bottle under pressure, minimizing the formation of foam and the risk of de-gassing, which is critical for carbonated drinks. Filling is performed at a controlled rate, typically using a “level” principle where the filling valve shuts off when the liquid reaches a predefined height within the bottle, guided by dedicated overflow tubes. All product-contact surfaces are manufactured from high-quality AISI 304 stainless steel, ensuring full compliance with sanitary standards required in the food and beverage industry. The filling station is equipped with pressure gauges and safety valves, allowing for fine-tuned process adjustments and safeguarding both the operator and the product. The system accepts a range of bottle sizes from 0.22 liters up to 1.5 liters, providing operational flexibility for various production formats. Changeover between bottle sizes is managed manually, with adjustable guides and supports. The monoblock is configured for crown cap application (26 mm diameter), using a dedicated capping turret with mechanical sorting and feeding of the crowns. The design enables precise and secure sealing, vital for maintaining carbonation and product integrity. Automation, Utility Requirements, and Operational Safety This Used Filling Monoblock Cimec America operates as a fully automated rotary triblock, requiring minimal manual intervention during normal production cycles. Mechanical synchronization ensures seamless bottle transfer between stations, supported by motor-driven conveyors and rotary starwheels for accurate positioning throughout rinsing, filling, and capping.

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 2000 liters Machine dimensions in cm: Length: 270 Width: 154 Height: 222 Electric power: 6.5 kW Gjdpfx Aneuu Rx Rsxjub

Year of construction: 2018, condition: like new (used), functionality: fully functional, A new system for treating wastewater or condensate. Stored in 2018 and unused. Can be connected and tested if necessary. Godpfowhlr Isx Anxoub

Condition: used, Year of construction: 2000, Overview  The rinser cleans and sterilizes containers and was built in 2000 by the German manufacturer Krones. The machine has already been disassembled and put into storage.  Technical details  Capacity: up to 32.000 containers/ h  Number of rinsing stations: 50 (some of them are missing)  Running direction: counterclockwise Container: glass + plastic  Wetted parts in V2A  Central lubrication Extensive documentation available Electropneumatic valve control Siemens S7 control Voltage: 400 / 230 V Frequency: 50 Hz Control voltage: 24 V DC Guodon S A R Sjpfx Anxob

Condition: used, Year of construction: 2019, Overview  This isobaric can filling monoblock was manufactured in 2019 by Italy GAI. The GAI MLE 6661 CAN is designed for filling beverages into cans. The machine is already dismantled and stored and is available immediately. Technical data  Capacity: up to 1,600 cph (33 cl); output up to 650 L/h Formats: 33 cl standard, 33 cl sleek, 50 cl standard Application: Can filling Configuration: Linear monoblock with 6 rinsing valves, 6 filling valves, 1 single-head lid seamer, weight control with expeller, cans washing tunnel, lids storing columns Lid format: CDL202 Can diameter: 50 mm – 85 mm Guedpfx Ansyudacexeb

Condition: used, Year of construction: 2014, Overview This MONO-BLOCK bottle filling line was constructed by KOHEM (now CIMEC) in 2014. It operates perfectly and has been well-maintained. Currently, it is dismanteld and stored. The bottle-formats are 33 cl long neck, 75 cl ”champagne-style” and 375 cl champagne style. The capacity is 1000-1300 bph when doing 33 cl long necks. Equipped with pneumatic offloading solution. Machine list Labeling Machine (2014) Manufacturer: CDA Model: R1000 Filler Capper (2014) Manufacturer: Kohem (now Cimec) Model: RIS 8/1 - DPS Gusdpjtt Um Hsfx Anxjb