Used Compressed Air Straight Screwdriver for sale (25,267)

Condition: used, Screw compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6 Serial no. 6240330200 Year of construction 2003 Volume flow 4.6 m3/min. Pressure capacity 10 bar Motor power main motor 30 kW Mains connection 400 Volt, 50 Hz Connection thread 1 1/2 inch - 36004 Switch-on hours read - 19256 Load hours read - Soundproofed Nsdjfmim Uopfx Akfjla Space requirement L x W x H 1850 x 1050 x 1760 mm Weight 910 kg good condition

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. 1 unit Aftercooler Type WFN009 DHH16 Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Nlsdpfx Ajdzqn Uokfoa Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Condition: used, Pneumatic press, compressed air press BOSCH type Nodpjh U Dtujfx Akfola Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Piston Compressor KAESER Type EPC 630-250 Serial No.: 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 liters/min. Maximum intake capacity: 630 liters/min. Output pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Connection: 400 Volt, 50 Hz (with 16 Amp plug) - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar - Run time from 0 bar to switch-off pressure of 10 bar = 5 min Nledpswypqrefx Akfoa Space required (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition

Condition: used, Screw compressor KAESER type BS 50 Serial no.: 402852 Year of manufacture: 1990 Nlodpfx Ajiyu Ifokfsa Volume flow: 5 m³/min. Operating pressure: 7.5 bar Main motor power: 30 kW Electrical connection: 400 Volt, 50 Hz Connection thread: 1 1/2" inch - 1107.90 hours of operation read - 749.00 load hours read - Sound-insulated Dimensions (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Very good condition Was a reserve compressor and has only few operating hours.

Condition: used, Filter fitting, filter unit COMPAIR for compressor units Compressed air filter Type: CF 0087B ZP Factory No.: 3363006 / 05 / 005 Operating pressure: max. 16 bar Thread connection: G 1 1/2" Flow rate: approx. 8,5 m³/min Filter element- No: CE 0087B - Filter housing made of aluminum Nlodpjhalvdjfx Akfea weight: 5 kg dimension L x W x H 125 x 110 x 420 mm good condition

Condition: used, Pneumatic screwdriver, pneumatic screwdriver DESOUTTER Nljdpfx Akofgrrhofea Pneumatic screwdriver, straight screwdriver for screwdriving technology Type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm Compressed air requirement: 6 bar Air consumption: 8.7 l/s Bit holder: M6 - Rotary switch for clockwise and counterclockwise rotation (rotary ring control) - Without screwdriver switch-off - Compressed air control line Ø 4 mm - Compressed air connection for screwdriver function min. Ø 10 mm - Aluminum holder for handling device - Screw feed Ø 12 mm (inner diameter) Dimensions L x W x H 60 x 46 x 870 mm Weight: 2.8 kg good condition 4 pieces available, price per screwdriver

Condition: good (used), Year of construction: 2015, MANUFACTURER: KAESER MODEL: TF174 SERIAL NO.: 1216 YEAR: 2015/08 POWER (kW): 2.52 CAPACITY (m³/min): 17 PRESSURE (bar): 16 Nlsdpfx Akoyn Egkefja

Condition: used, New compressed air refrigeration dryer, unused compressed air dryer from stock Compressed air dehumidifier SMC type IDFA3E-23 Compressed air dryer, compressed air dehumidifier Serial No.: PP0213S Year of manufacture: 2011 SMC compressed air dryer IDFA size 3E Flow rate per hour: 12,000 liters/h (12 m³/h) Flow rate per minute: 200 liters/min. Nlodpfjyif I Uex Akfsa Operating pressure max. 10 bar Operating pressure: 0.15 to 1.0 MPa (manufacturer's specification) Refrigerant: R134a Temperature range: 5°C to 50°C Power consumption: 180 watts Power supply: 230 volts, 50 Hz, 1.2 amps Connection pipe thread: 3/8" - Stainless steel heat exchanger, air-cooled condenser - Condensate separator with automatic drain - Condensate drainage via hose Space required (L x W x H): 410 x 226 x 473 mm Weight: 18 kg New, unused, in mint condition from stock

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: AC, volume flow: 486 m³/h, total width: 610 mm, total length: 625 mm, total height: 1,030 mm, overall weight: 92 kg, input voltage: 230 V, ambient temperature (max.): 50 °C, ambient temperature (min.): 1 °C, type of cooling: air, pressure (max.): 14 bar, power: 0.98 kW (1.33 HP), input frequency: 50 Hz, Equipment: type plate available, We offer this new Friulair ACT 80 compressed air refrigeration dryer, year of manufacture 2022. Voltage: 230 V Frequency: 50 Hz Power consumption: 0.98 kW Current: 4.6 A Nlodpfsyf Earox Akfja Max. operating pressure: 14 bar Air flow rate: 8,100 l/min / 486 m3/h Refrigerant: R407C Weight: 105 kg (gross) Condensate drain: Bekomat If you have any questions or need more information, please send us a message or give us a call.

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 7000 l/min Power 1.37 kW Power supply voltage 230 V Nodpfx Aemt Dcxekfsla Dimensions (L x W x H) 1000 x 550 x 920 mm Weight 95 kg Type and amount of refrigerant R410a, 900 g

Condition: new, Year of construction: 2026, 270 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 270 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 270 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 5 connection ports with diameters of 1", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands chemical and atmospheric factors. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in the Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection Ports: 5 pcs – diameters: 1", 2", 1/2" Nlodpfx Akexbzalsfoa Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Year of construction: 2026, condition: new, functionality: fully functional, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Nedomt Dcqjpfx Akfela Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 3800 l/min Power 0.9 kW Supply voltage 230 V Dimensions (L x W x H) 850 x 480 x 480 mm Weight 59 kg Type and amount of refrigerant R410a, 650 g

Condition: new, Year of construction: 2026, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 500 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1.1/4", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications Nsdpexby D Aofx Akfjla This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands both chemical and atmospheric conditions. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in both Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Precision and Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of air-powered devices and significantly extends compressor lifespan by reducing the number of start-stop cycles. The vertical design allows for space-efficient installation, which is especially important in facilities with limited room. A properly matched tank helps minimize pressure drops and prevents pneumatic system overloads, resulting in greater efficiency and enhanced safety across the entire installation. Standard Equipment Connection Ports: 6 pcs – diameters: 1.1/4", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 1500 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Type and amount of refrigerant R134a, 400 g Nljdpfx Aemt Dbhokfoa The price given is a NET price. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Nlodpfomt Dcfjx Akfoa Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g

Condition: excellent (used), Year of construction: 2010, Ingersoll Rand TMS 80 Refrigerant Dryer Capacity: 8.2 m3/min Year of manufacture: 2010 Nsdpeymmbtjfx Akfjla The dryer is fully operational.

Condition: used, functionality: fully functional, W-KRONEN HP10 LT500 Compressed Air Compressor with integrated Aerotec Refrigerated Compressed Air Dryer Aerodry PRO 1000 The W-Kronen HP10 LT500 is a powerful and reliable air compressor designed for demanding applications in trade, industry, and workshops. In combination with the integrated refrigerated compressed air dryer, this system provides a compact, efficient, and ready-to-use complete solution for producing high-quality compressed air. Technical specifications: - Tank size: 500 L - Tank pressure: 10 bar - Intake capacity: 1100 L/min - Delivery rate: 950 L/min Nlodpfjyrpnajx Akfoa - Speed: 1200 rpm - Sound pressure level LWA/dB: 97/78 - Motor kW/hp: 7.5 / 10 - Voltage/Hz: 400 V / 50 Hz, 16A plug

Condition: good (used), Year of construction: 1998, Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure vessel, compressor tank -Manufacturer: Mechanical and container construction, standing compressed air container Nodpfx Akjphun Esfsla -Content: 3000 l -Operating pressure: 11 bar -Accessories: including attachments, see photos -Dimensions: Ø 1475 x 2760 mm -Weight: 700 kg

Condition: used, Year of construction: 2010, Operating hours: 58,730 h Technical data: Max. compressed air pressure: 14 bar Ambient temperature, max.: 50°C Nledjydlycepfx Akfja Refrigerant: R410A, 0.86 kg Connection: 230 V Weight, approx.: 154 kg

Condition: excellent (used), MANUFACTURER: ALUP MODEL: ADQ2700 SERIAL NO.: 07M011498 Nledpsykvphsfx Akfsa YEAR: 2007 POWER (kW): 8.7 CAPACITY (m3/min): 45 PRESSURE (bar): 12 HOURS (DOCUMENTED/TOTAL):

Condition: excellent (used), Year of construction: 2015, MANUFACTURER: DRYTEC Nodpfoykvmtsx Akfsla MODEL: SD1800 SERIAL NO.: 3414MA12150 YEAR: 2015 POWER (kW): 3.14 CAPACITY (m3/min): 30 PRESSURE (bar): 16 OPERATING HOURS (DOC/TOTAL): FREQUENCY INVERTER: BUILT-IN DRYER: R134a, 7kg

Condition: excellent (used), Year of construction: 2011, PROD. BRAND MODEL MDX6500 S/N CAI492661 YEAR 2011 POWER (kW) 1.64 Nodpfjykvk Esx Akfsla CAPACITY (m3/min) 6.5 PRESSURE (bar) 13 HOURS (DOC/TOTAL) FREQUENCY INVERTER BUILT-IN DRYER yes R404a 1.35kg

Condition: used, Year of construction: 2005, functionality: fully functional, volume flow: 1.8 m³/h, total width: 800 mm, total length: 1,000 mm, total height: 1,450 mm, pressure: 16 bar, overall weight: 300 kg, BEKO Drypoint RA300 refrigeration dryer 300m3/h, +3°C /ct1933/ Manufacturer: BEKO DRYPOINT Type: RA300 Year of manufacture: 2005 connection:dn80 pn16 Nledpfx Aot A Uwtskfea Air delivery: 1800 m3/h, +3°C Operating pressure: 4-14 bar level-controlled BEKOMAT condensat drain Enclosure size: 1000x800x1410 mm Weight: 275 kg

Condition: used, Year of construction: 2021, Max. pressure: 16 bar Nedpfxjxz Al No Akfsla Power: 0.81 kW