Refrigeration dryer Compressed air dryer

Sabroe GmbH 55m³/min 16 bar SV 1010 AB

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Vanicek drying chamber with post rack trolley with in- and out-swing gates with control system and electrical control cabinet Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan VMR 71-05-4, E-motor 1.1 kW/400V Hjdpfx Aswxdqkeaheu Dehumidification Ø 50, with actuator Dehumidification Ø 40, with actuator UGL sensors, humidification, heating valve (to be provided by client) Switchgear, heating coil, fan frame Stacking dimensions 1x12.5 m, 2x1.2 m, 2x1.0 m

Condition: used, GRUNDFOS vertical multistage high-pressure centrifugal pump Pump in like-new condition, but a part of the magnetic coupling has been removed. Type CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Flow rate at 7.2 bar: max. 10 m3/h Head: max. 91.8 meters Power supply: 400 volts, 50 Hz Power: 3 kW - Pump design with 9 stages - Made of stainless steel 1.4401 - The like-new pump was used as a source of spare parts, but several new pump chambers are included - A part of the magnetic coupling is missing Suitable for potable water supply, irrigation, and drainage Packaged in the original wooden crate Hodpfxefupads Aahou Pump dimensions (L x W x H): 1100 x 250 x 300 mm Shipping crate dimensions (L x W x H): 1400 x 330 x 340 mm Weight with shipping crate: 85 kg Like new Not a submersible pump or a deep-well pump.

Condition: good (used), Heavy duty high pressure washer. Two motors - 90kW + 1,5kW Machine was used for few hours and then stored at the warehouse. Hedpfoh Rkilox Aahju Delivery is available.

Year of construction: 2011, condition: ready for operation (used), The ultrafiltration system is used to purify various liquids. The membrane elements feature a 37/3.8 channel design, a pore size of 0.1 µm, and a length of 1300 mm. Each of the two modules contains 32 ceramic rods, with a total capacity of 2,000 L/h per module. Hjdef Dc D Hepfx Aahju 1 structural frame, 1 feed pump, 1 rod heater, 2 bleed pumps, 1 cleaning tank, 1 membrane valve, 1 compressed air membrane pump, 1 UF ceramic module, 1 temperature monitoring unit, 1 control valve, 4 pressure gauges with display, 1 control unit compliant with VDE 0110/0113 CE, 1 flow meter, 1 pre-assembly of the system at the supplier's factory.

Year of construction: 1978, condition: good (used), Weinig U 17N 7-head four-sided planer Planing width: 170 mm Planing height: 120 mm Number of spindles: 7 Spindle arrangement: bottom/right/left/right/top/bottom/universal Electric height adjustment Feed rate: 6.5 to 45 m/min Drive for feed rollers: cardan shafts Hedpog Sa R Dsfx Aaheu 11 pull rollers from above

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: MA0139_1335, Exhibit immediately available: New Kaeser Aircenter SK 22 - 8 bar screw compressor with integrated refrigeration dryer and 315 liters compressed air tank Control Sigma Control 2 Year: 2024 Operating hours: 1 hr Pressure: 8 bars Rated power: 11KW Delivery quantity: 2.00 m³/min Sound level: 66 dB(A) Compressed air outlet: 1" Compressed air tank: 350 liters volume Pressure dew point refrigeration dryer: + 3°C Electrically level-controlled condensate drain: ECO DRAIN Dimensions length x width x height: 750 x 1335 x 1880 mm Weight: 579 kg Hjdjhwwyrspfx Aahju Visit our store. We always have a wide range of new and used compressors in stock!

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. Hjdsr A El Eepfx Aaheu The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. "Loose adhesion on the lower part of the dished end" (pictures to follow)

Year of construction: 2007, condition: good (used), machine/vehicle number: 53, Proving chamber for 8 carts, made Pietroberto, type PB-CF10T, year of manufacture 2007, series 53, made in Italy. Fermentation chamber volume 12.02 sq. meter ▪ Power: 4kW ▪ Double heating element: 1.8 X 2 kW; ▪ Maximum temperature: 45°C ▪ Siemens fan motor 0,25 kW ▪ Maximum humidity: 90% ▪ With viewing windows at each door. ▪ The room has 4 doors on both sides ▪ With electromechanical switches ▪ With digital control ▪ With a protective barrier, with internal stainless steel walls inside and outside ▪Air conditioning unit and stainless steel fans ▪ Constant regulation of air temperature and humidity ▪ External dimensions: (LxWxH): 2,500 mm x 2,000 mm x 2,300 mm ▪ Internal dimensions (LxWxH): 3,250 mm x 1,850 mm x 2,000 mm ▪ Full aluminium camera structure and frame, just the structure! ▪ It requires an independent water source with a filter on the input phase. The proving chamber is correctly disassembled and correctly stacked, it also has an assembly sketch drawn up at the time of disassembly. Hedpfx Aasm Uywajhsu Price Euro 2.400 + VAT, FCA Oradea/Romania NOTE: Please take note that this advertisement does not represent a binding offer from us to any interested parties, nor does it contain a request for you to make a binding offer to us. The advertisement is only as a starting point for future contract discussions between us. Please get in touch with us if you're interested in the machine, without obligation using the contact information provided by us or the "Write message" feature, in each instance providing your phone number and email address. After that, we will be pleased to email you our terms and conditions of the sale along with an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2009, condition: ready for operation (used), Used piston membrane pump, feeding pump Hedpfx Aed Hf I Rjaheu Abel HMD-G-32-0250 Yer of construction: 2009 Capacity: max. 25 m³/h Pressure: 15 bar Machine-number: 5100443-1 length: 3300 mm

Year of construction: 2002, condition: excellent (used), 3D coordinate measuring machine in a stand-alone design *Floor installation on steel legs *Height from floor to measuring plate: 650 mm Measuring range X 2,100, Y 1,600, Z 2,100 [mm] Measuring uncertainty 25 + L/70, max. 50 [µm] at L = 3,000 mm Dynamics 3D traversing speed 220 mm/sec 3D acceleration 1000 mm/sec² Probing system Renishaw PH10M Renishaw TP20 + 2 modules Control system Pantec Eagle Pro / WPC2040 Joystick HT400 Hodpfx Ashlqapsahsu Software POLYWORKS Inspector (alternative available) Optional technologies Probe changing rack MCR20 Supplier's services Transport, commissioning, calibration, final acceptance Warranty 12 months, from the date of acceptance