Used Connectors, 25 Pieces for sale (24,572)

Condition: good (used), Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: MK3 17 pieces -Type: Reducing sleeve MK3/2 -Dimensions: Ø 25/113 mm -Price/Fee: complete Fgsdpfxsz Ilwrs Ap Djh -Transport dimensions: 150/140/H113 mm -Total weight: 3.4 kg

Year of construction: 2022, condition: like new (used), 1 x Ultrasonic deburring machine Ultratec A 25 Year of manufacture: 2022 Fgodpez Ig S Djfx Ap Deh The machine has hardly been used and is in like-new condition. The machine can be inspected while running in its current operating environment.

Year of construction: 2013, condition: used, functionality: fully functional, FOR SALE: WASTEWATER PRE-TREATMENT SYSTEM Due to the expansion and relocation of our winery, the wastewater pre-treatment system, belonging to the ÉSE series of Élinvest Kft., is now available for sale. The system operated flawlessly from 2013 to 2024 with regular maintenance. Technical specifications: Untreated raw wastewater enters an oversized sump below the filter unit, from where a transfer pump with a capacity of approximately 25 m³/h conveys it to the pre-filter unit. The system filters the technological wastewater generated during operation through a Ø1 mm filter screen within 10 minutes of its generation, in automatic mode. Solid materials larger than 1x1 mm are collected in a 240-liter, covered plastic container, while the water phase containing dissolved and suspended solids flows by gravity to a transfer well that also collects municipal wastewater. After the completion of the harvesting operations, the wastewater discharge rate decreases to 20-40% of the harvesting water flow. This water is usually acidic; therefore, the discharge pH can be adjusted by adding a solution of sodium hydroxide (20-30% concentration). A pH control unit, suitable for dispensing both acid and alkali, maintains the pH of the treated wastewater within the specified limits (5.5 and 10). Fgjdpfx Apsz Eiigo Dsh The operation and control are performed by a pH probe and a custom electrical control panel. The rotating drum of the filter unit is cleaned with a rotating brush and an intermittently operating pressure booster connected to a water supply with a minimum pressure of 4 bar. The construction technical approval number for the filter system is ÉME É-61-2011. The average wastewater discharge is 3-10 m³/day. The maximum instantaneous wastewater flow is 10 m³/h, and 25 m³/h in case of an emergency.

Condition: used, Year of construction: 2005, feed rate X-axis: 60 m/min, plate length: 2,500 mm, plate width: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum plate width: 1,200 mm Maximum plate length: 2,500 mm Minimum plate width: 220 mm Minimum plate length: 250 mm Maximum feed rate: 60 m/min EQUIPMENT Fsdpfx Asz Ekfcsp Dogh 90° transfer conveyor CE safety compliance The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 5981

Condition: new, neu Fsdpfx Aey Hf Ruop Dogh ca. 2 - 4 Wochen ab Auftr Deutschland 7519.51 € 145.13 € 23 mm MK 3 260 mm 20 - 2000 U/min 1,5 kW M16x1 430 mm 715 mm 1800 mm 290 kg 115 mm 110 mm 230 - 850 mm 420 x 340 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 23/25 (in E335/ST60) Main switch Thread cutting device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 280127900226, Year of construction: 2008, operating hours: 16,627 h, load capacity: 25,000 kg, fuel type: electric, No minimum price – guaranteed sale to the highest bidder! Comes with a battery from 2024! TECHNICAL DETAILS Load capacity: 25,000 kg MACHINE DETAILS Drive: electric Battery voltage: 80 V Battery year: 2024 Unladen weight: 2,390 kg Operating hours: 16,627 h Fedpfxez I Nbno Ap Degh EQUIPMENT Heater Full cab External reference: SL15869SP

Condition: good (used), Year of construction: 1987, machine/vehicle number: 12871, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, pressing force: 112 t, oil tank capacity: 120 l, total length: 3,300 mm, total width: 2,150 mm, total height: 2,500 mm, overall weight: 10,000 kg, controller manufacturer: DELEM, controller model: EA 22, working length: 3,100 mm, DARLEY EHP 110 31/25 press brake Fedpfx Aez I N D Njp Degh - including foot switch and the bending tool located on the machine FCA D-35614 Aßlar - loaded onto a truck

Condition: used, Year of construction: 2004, functionality: fully functional, Equipment: documentation/manual, CMZ Turning Center 4 Axes: X, Z, C, B Type: TL 25 BTM Year: 2004 CNC: GE Fanuc Series 18i-TB Fedpfx Aez Ih A Dsp Dogh Video Available Inspection Possible Jaw Chucks: Included ✅ Tool Holder: Included ✅ Documentation: Included ✅ Chip Conveyor: Included ✅

Condition: ready for operation (used), Year of construction: 2011, operating hours: 46,000 h, clamping force: 245 kN, screw diameter: 18 mm, Hydraulic injection moulding machine manufactured in 2011. This SUMITOMO SHI DEMAG Systec 25/320-80 features a clamping force of 25 t and a screw diameter of 18 mm. It offers a maximum metering volume of 23 cm³ and a mold height range of 130 mm to 480 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 25/320-80 machine we have for sale. Contact us for further details. Fodpfxsz Erxkj Ap Dogh - Max. Specific Injection Pressure: 2868 bar- Max. Metering Volume: 23 cm³- Mold Height: 480 mm- Min. Mold Height: 130 mm- Distance Between Tie Bars: 320 x 320 mm- Centering Hole Diameter (Ejector/Nozzle): 110 mm- Maintenance Group: 1- Core Pull: 1- Operating Hours: 46,000 hrs (Pump)- Pump Drive Power: 17.5 kW- Power Supply: 400 V ±10% / 50 Hz, 3 Ph+N+PE- Cooling Circuit: Open, separated water connection for mold and machine cooling- Cylinder / Screw: Bimetallic cylinder, wear-resistant 18 mm screw with 3-piece non-return valve- Nozzle: Open nozzle M24x1.5, flat radius, 2.0 mm bore- Integrated Sockets: 2 x Schuko 1Ph/230V/10A, 2 x IECEE 3Ph/400V/16A

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, working width: 1,450 mm, mount diameter: 800 mm, number of feed rollers: 2, section length (max.): 1,560 mm, The machine is equipped with 2 unwinding stations, allowing you to process double the quantity of cut lengths simultaneously. The machine speed is 50 m per minute. In the longitudinal direction, 3 knives can be set, enabling the width to be halved and a trim to be cut off on each side. The unwinding station is equipped with 3-inch and 6-inch pneumatic expanding shafts. We have successfully processed BO PET films with thicknesses ranging from 36 to 250 microns. The machine is fully connected, can be inspected daily, and, by arrangement, customer material can also be tested. We would disassemble and load the machine, either onto a truck or into a container. Fedpfx Asy D Edcsp Degh

Condition: ready for operation (used), very good condition. Fsdez N Sqpjpfx Ap Dsgh

Condition: ready for operation (used), functionality: fully functional, Maximum straightening pressure: 25 tons Valve stroke: 150 mm Includes straightening unit for shafts. Fgsdpfx Aoz H Nldjp Dsh

Condition: used, Year of construction: 2018, overall weight: 600 kg, load capacity: 10 kg, terms of delivery: FCA Pegnitz Fgjdpfjz Hfl Hox Ap Djh delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 1988, functionality: unexamined, machine/vehicle number: 0210.07382, turning length: 1,000 mm, turning diameter: 350 mm, spindle speed (max.): 3,000 rpm, chuck outer diameter: 315 mm, The Okuma LB 25 is a used CNC inclined-bed lathe, manufactured in 1988, equipped with an Okuma OSP 5020 control. According to the documentation we have, it can handle workpieces up to 1,000 mm in length and has an integrated Okuma Touch Setter. The machine comes with a chip conveyor and oil mist extraction system. It is located in the Düsseldorf area, along with an Okuma LB 15 from 1987. TECHNICAL DATA - Year of manufacture: 1988 - Control: Okuma OSP 5020 - Turning length: 1,000 mm - Turning diameter according to documentation: 350 mm (please verify on the nameplate before purchase) - Chuck diameter according to documentation: 315 mm - Spindle speed max.: 3,000 rpm - Measuring device: Okuma Touch Setter (integrated) EQUIPMENT AND ACCESSORIES - Chip conveyor Knoll 320 S-1 with coolant cleaning - Extraction system Filtermist F21/8 - Tool turret with holders (as shown in the photos) - Turning and clamping tools Fgsdsz H Ugyspfx Ap Doh CONDITION During our inspection on October 1, 2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION For shafts and turned parts up to 1 m in length, suitable for maintenance and contract manufacturing. LOCATION AND PROCEDURE The machine is located in the Düsseldorf area. Inspection is possible by appointment. Disassembly, loading, and transport are organized by the buyer. Upon request, we can provide contact information for freight forwarders in the region. Price upon request. Please contact us via the contact form.

Condition: refurbished (used), Year of construction: 2019, machine/vehicle number: R-00623, load capacity: 25 kg, arm reach: 1,853 mm, controller manufacturer: R-30iB Plus, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-20iB/25 manufactured in 2019.07. The robot comes with an R-30iB Plus controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iB/25 Model Number: AO5B-1226-B201 Year of Manufacture Robot: 2019.07 Warranty term (months): 12   Payload (kg): 25 Reach (mm): 1853  Repeatability (mm): ± 0.02 Controlled Axes: 6-axis Fodsz D I Thopfx Ap Djgh Installation Type: Floor, upside-down, and angle Mount Weight (kg): 210   Controller: R-30iB Plus Year of Manufacture Cabinet: 2019.06 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10  

Year of construction: 2006, condition: used, Stainless steel mixing tank for dressings and sauces This mixing tank has an agitator from Parema Procestechniek (type PAR5L-25, built 2006) and was used as a dressing mixer. The tank has a hinged lid and a conical bottom with outlet, and stands on legs with castors. Agitator speed is set steplessly with the dial on the control cabinet, which houses a frequency inverter. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Mixing tank with agitator Speed: Stepless (frequency inverter) Tank: Hinged lid, conical bottom with outlet Fsdsz Ndciopfx Ap Dsgh Construction: Stainless steel, on legs with castors

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 5,800 h, fuel type: diesel, Equipment: all wheel drive, Diesel All-Wheel Drive Articulating Boom Lift GENIE Z 45/25 Year of manufacture: 2008 According to meter reading: 5,800 hours 🏗️ Performance Data & Working Range • Maximum working height: 15.70 m to 15.97 m (Model J with basket boom reaches up to 16.05 m) • Maximum platform height: 13.90 m to 14.05 m • Maximum lateral reach: 7.50 m to 7.52 m (Model J with basket boom up to 7.65 m) • Maximum lifting capacity: 227 kg (approved for 2 people + tools) • Turret swivel range: 359° (not continuous) • Platform rotation: 180° hydraulic (160° on models with basket boom) 📐 Dimensions & Weight • Transport length: approx. 5.56 m (Model J with folded basket boom approx. 6.65 m to 6.83 m) • Transport width: 2.29 m (with standard off-road tires) • Transport height: 2.11 m to 2.13 m • Wheelbase: 2.03 m • Ground clearance: approx. 18 cm to 24 cm • Operating weight (4x4 RT): approx. 6,078 kg to 6,460 kg (depending on tire filling, e.g. foam-filled) ⚙️ Drive & Off-Road Capability (4x4) • Drive type: All-wheel drive (4x4 / RT = Rough Terrain) with diesel engine (usually Deutz or Perkins) • Maximum gradeability: 45% (in retracted position) • Travel speed (retracted): up to 7.7 km/h • Travel speed (elevated): approx. 1.0 km/h • Tires: 14-17.5 / Off-road profile (often foam-filled to prevent punctures) • Fuel tank capacity: approx. 54 to 64.4 liters • Hydraulic tank capacity: approx. 83 to 95 liters - Immediately ready for operation in original condition! - Upon request, a new Austrian inspection certificate can be provided before delivery! Fgodpfx Asz Iv Hwjp Deh Selling price: €13,900 net Affordable delivery also possible!

Condition: used, Year of construction: 1972, machine/vehicle number: 72022, This BAIER hot stamping press, type 49/25, is being auctioned off in our industrial auction / machine auction due to the closure of Trola GmbH – including machines, workshop equipment, plastic parts, and material handling equipment – online. Fgsdpfsz Ndgnox Ap Djh You can find this and many other items on our platform.

Condition: used, Year of construction: 2016, Pneumatic press Manufacturer: Schmidt Type: 25-100-3K Year of manufacture: 2016 Nominal force: 12.5 kN Stroke: 100 mm Fjdpfsz Hlzhsx Ap Dogh Includes SCHMIDT PressControl 75 in the two-hand safety version Weight approx.: 45 kg 51026ä

Condition: used, Offered for sale is a vertical form-fill-seal machine with dosing and filling unit. Control system: HASSIA REDATRON machine control system with LCD display, membrane keypad, recipe memory, parameter management and emergency stop switch. Equipped with stainless steel product container, conical dosing hopper, pneumatically operated dosing unit, film roll holder, film guide, forming collar, vertical film forming, sealing unit, transparent protective enclosure and connected conveyor belt. Inspection possible by arrangement. Fgedez N Ha Eopfx Ap Deh

Condition: good (used), Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder Fedpfx Asz Aqvrop Degh -Mounting bracket: Mount: MK5 4 pieces -Type: Cone Ø 40/37 mm 2 pieces / Ø 32/29 mm / Ø 27/25 mm -Price/Fee: complete -Transport dimensions: 420/230/H65 mm -Weight: 15 kg

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Machine Brand: Technica Machine Model : Rotaflex DV 25/15 The Construction Year : 2006 Fodpfxoz Hmfbs Ap Dogh The machine will be refurbished before delivery. Made in Switzerland Number of Stations : 15 Stations Number of Modules : 14 Modules Number of Spindles : 26 Spindles Tool Holders : HSK-32 Condition of the Machine : Refurbished Complete electrical-electronical refurbishment, new Fanuc CNC control system Necessary mechanical refurbishment Accessories : 1) NORDMANN Tool Monitoring 2) Kraft&Bauer CO2 Fire Extinguishing System 3) STÄUBLI TX60 Robotic Arm 4) MAPAL Recessing Heads

Condition: good (used), FS Frank Schäffler Used Machines You are bidding on: a branded folding machine – Schlebach Device features: RBM for non-ferrous metals up to 0.8mm, radius 300 mm steel sheets up to 0.7mm, radius from 1500 mm stainless steel sheets up to 0.5mm, radius from 1500mm You can see what is possible with this machine in the pictures in the description – very interesting YouTube videos are also available. Other tools and machines, as well as machine accessories, are always available – see the shop. You will receive an invoice according to §25a UStG; the value-added tax is included in the invoice amount. Differential taxation. Free loading is possible. Inspection and testing are possible and desirable after a telephone appointment has been arranged. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer himself (or by a freight forwarder commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97261 Fgedpfxjz Nh Dfo Ap Deh Article number

Condition: used, Year of construction: 1990, Fixed Bed Milling Machine CORREA A25/25 Travel X: 2500 mm Travel Y: 1200 mm Travel Z: 1000 mm CNC HEIDENHAIN TNC 355 Spindle: SA 50 Spindle motor: 30 CV Spindle speed: from 2 to 3000 RPM Table size: 3000 x 1000 mm Year of construction: 1990 Maxi eligible load on table: 7 T Manual Swivel Head Fedpfx Asz Nxx Tsp Dogh Voltage: 380 V Dimensions (L x W x H): 5000 x 3000 x 3000 mm Weight: 16,5 T

Condition: used, Year of construction: 2019, operating hours: 27,496 h, functionality: fully functional, machine/vehicle number: 1447-6948947, power: 15 kW (20.39 HP), pressure (max.): 8 bar, Kaeser SK 25 T Rotary Screw Compressor (2019) 15kW motor power 8bar pressure Fjdpjz Hdcksfx Ap Dsgh 27,496 working hours 11,328 loaded hours