Used Costa Costa K Seria - 1350 for sale (36,351)

Condition: like new (used), Year of construction: 2017, operating hours: 108 h, functionality: fully functional, working width: 1,650 mm, power: 370 kW (503.06 HP), type of input current: three-phase, workpiece height (max.): 160 mm, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 1,650 mm, space requirement length: 7,660 mm, COSTA LEVIGATRICI 1650 CALIBRATOR/SANDING MACHINE This machine is in really new condition with only approximately 100 hours of operation. It is fully functional and operates without any issues. Technical Specifications * Machine Type: Automatic sanding / calibration line * Working Width: 1650 mm * Feed System: Motorized conveyor belt with variable speed control * Working thickness: 3 to 160 mm Lower Section: * 3 sanding steel roller units * 1 finishing pad unit * Cleaning system with blowers and brushes Upper Section: * 3 sanding steel roller units * 1 finishing pad unit * Cleaning system with blowers and brushes Unit Power: * From 18.75 kW up to 75 kW (depending on the unit) Control System: * PLC control with touchscreen interface Dusdpfxjyt H Dne Ak Tju Safety: * Safety sensors * Emergency stop system

Condition: new, functionality: fully functional, machine/vehicle number: NEW-15, empty load weight: 449 kg, maximum load weight: 901 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,560 mm, loading space width: 1,340 mm, loading space height: 1,500 mm, loading space volume: 5 m³, suspension: other, tire size: 185 R 14 C, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS GO 256 134 150 1350 1 Box Trailer NEW VEHICLE Internal dimensions: 256cm x 134cm Internal height: 150cm Loading platform height: 54cm Gross vehicle weight: 1350kg Payload: 901kg Braked single-axle low-loader Overrun brake and handbrake by AL-KO 1350kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame 15mm phenolic plywood sidewalls and roof Interior: grey Exterior: white GRP layer Ideal base for wrapping or signage Rear double doors made of phenolic plywood with lockable latch Dodpfx Akoghpb Se Tjuu Water drainage channel above the rear doors 15mm thick, slip-resistant and durable phenolic plywood floor Jockey wheel Integrated floor-mounted airline lashing rail (600kg tensile force) 4 moveable lashing points for airline rail LED interior light 14" reinforced C-rated tyres M+S tyres 13-pin plug Front marker lights Rear lamps with reversing light, rear fog lamp, and triangular reflector 2x wheel chocks OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - Change internal height to 138cm or 180cm - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - Loading ramps - Side door left or right, 72cm - Ramp instead of double doors, 750kg incl. lifting aid - SARIS alloy wheels - Full LED lighting - Anti-theft device - Anchor rail with locking bar - Rear support stands Further accessories available on request! Plus shipping to Gera and vehicle registration document: €250 net Pictures are for illustration purposes and may show optional accessories subject to extra charge. Didn't find the right trailer? We always have 50–100 vehicles in stock and ready for immediate collection. Our workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist for axle repair, including for caravan trailers. Large selection of rental trailers available. We also stock a wide range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or come by directly.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-22, empty load weight: 319 kg, maximum load weight: 1,031 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS PL 256 150 1350 1 NEW VEHICLE Internal dimensions: 256cm x 150cm Side panel height: 30cm Loading platform height: 66cm Total weight: 1350Kg Payload: 1031Kg Braked single-axle trailer Overrun brake and parking brake by KNOTT Axle with large brake and cooling fins Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side panels with tensioning closure Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed plywood floor Automatic jockey wheel with 400Kg support load 8 noise-reducing lashing eyes with 800Kg pulling force Reinforced 13" C tires with steel valve M+S tires Net/rope hooks on the frame 13-pin connector LED marker lights at the front Rear lights with reversing light and triangular reflectors OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICES FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side panels (price reduction) -Side panel height increased to 35cm -Black Edition (powder-coated side panels and rims in black) -Ramps -Steel plate on the base plate -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf guard in various heights, also closed -Extension side panels 30cm with tensioning closure -Flat cover with or without bow -High cover 160cm or 180cm Further accessories available upon request! Plus freight to Gera and vehicle registration document 200 € net. Images are for illustrative purposes and may show optional accessories that incur an extra charge. Dsdpfxozb Nc Ae Ak Tjuu Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravan trailers. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come directly to our premises.

Condition: used, empty load weight: 8,610 kg, maximum load weight: 21,390 kg, overall weight: 30,000 kg, first registration: 03/2015, loading space length: 10,960 mm, loading space width: 2,520 mm, loading space height: 2,400 mm, loading space volume: 66 m³, suspension: air, color: white, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, cooling unit, Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders, which is why our listings always show the export price, as this is independent of the place of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures it is updated regularly. This information is intended as general guidance and does not replace detailed, individual consultation when making a purchasing decision. Only the provisions contained in the purchase contract are binding. Subject to changes, errors, misprints, and prior sale. Dedpfexm R Ddox Ak Touu Only our general terms and conditions apply. Languages - We speak English - On parle français - ?? ????? ?? ????? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: ready for operation (used), Year of construction: 2010, Belt sander manufactured in 2010. This WEBER KSF-3-1350 features three sanding belts for high-quality fine, veneer, and high-gloss sanding. It has a constant working height of 900 mm and a continuously variable feed speed of 3-18 m/min. If you are looking to get high-quality sanding capabilities, consider the WEBER KSF-3-1350 machine we have for sale. Contact us for further details regarding this machine. Machine frame and feed • Heavy-duty welded steel construction for 3 sanding units • Constant feed height: 900 mm • Control panel and sanding belt change on the left (in feed direction) • Continuously variable feed speed: 3–18 m/min, frequency-controlled • Vacuum conveyor belt version with 5.5 kW vacuum blower and vacuum channel to the top edge of the machineUnit 1: Cross-belt unit • Pressure lamella belt with felt and graphite • ISD link pressure bar system with 11 mm workpiece detection and 44 mm pressure bar width • Workpiece-controlled sanding belt blow-off deviceUnit 2: CBF combination unit • Grooved rubber contact roller Ø 130 mm, 60 Shore • Cross-feed lamella belt with separate 4.0 kW drive • ISA link pressure beam system with 11 mm workpiece detection and 22 mm pressure width (counter-rotating) • Workpiece-controlled oscillating sanding belt blow-off deviceUnit 3: Cross-belt unit • ISD link pressure beam system with 11 mm workpiece detection and 44 mm pressure beam width • Workpiece-controlled sanding belt blow-off deviceControls and functions • Siemens MP 377 12" Multi-Panel HMI: 12" color display, program memory for 300 programs, all parameters set via program • WEBER i-Touch control with rotary knob navigation • WEBER AWDM: automatic thickness adjustment at machine inlet with start switch • Over-thickness safety roller at inlet: automatic lifting of contact roller and segmented pressure beams; feed shutdown • ISA/ISD control: high-resolution workpiece detection in 22 mm increments; free loading of complex shapes; multiple loading with minimal spacing; adjustable grinding intensity and pressure via program Duedpfx Akoy Twwye Tju • ISA linkage pressure beam system (Unit 2): pressure piece movable longitudinally and transversely • ISD segmented pressure beam system (Units 1 and 3): separate adjustable edge pressure (outer edge only or outer and inner edges); selectable for longitudinal and transverse edges or longitudinal onlyTechnical data • Working width: 1350 mm • Drive unit 1 (Eco-Drive, frequency-controlled): 15.0 kW • Drive unit 2 (Eco-Drive, frequency-controlled): 20.0 kW • Drive unit 3 (Eco-Drive, frequency-controlled): 15.0 kW • CBF drive: 3.0 kW • Vacuum blower drive: 5.5 kW • Anti-rebound feed (frequency-controlled): 3.0 kW • Height adjustment drive (frequency-controlled): 0.75 kW • Sanding belt speed (frequency-controlled): approx. 3–20 m/s • Sanding belt size (cross belts): 2 × 150 × 5100 mm • Sanding belt size (wide belt): 1370 × 2620 mm • Workpiece thickness (min/max): 4–140 mm • Working height (constant): 900 mm • Stepless feed speed: 3–18 m/min Additional equipment • Workpiece ejection device with WEBER ES system (workpiece-controlled; energy-saving; individual slide control) • WANDRES micro-cleaning, single-brush version (power sword brush with integrated micro-moistening for optimal paint dust removal)

Condition: used, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 10/2015, next inspection (TÜV): 05/2027, total width: 2,600 mm, total height: 3,920 mm, Manufacturer: Schmitz Cargobull Type: SCB?S2 First registration: 10/2015 Internal length: 13.40 m Internal width: 2.40 m Internal height: 2.45 m External length: 13.90 m Dsdpfx Ajy Sdn Nok Touu External width: 2.60 m Saddle height: 1.19 m TÜV valid until: April 2027 Unladen weight: 9,600 kg Payload: 22,400 kg Gross weight: 32,000 kg German vehicle German registration documents Available immediately

Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander - Italian production - transverse aggregate so-called sergeant - year of production 2011 - electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum workpiece length 365 mm vacum table 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore diameter 240 mm engine power 18.5 kW 3rd aggregate: rubber shaft hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe Dodpfogr Er Sex Ak Tjuu engine power 15 kW 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation feed speed 2.5 - 18 m / min pneumatic straps tension electric height adjustment spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Year of construction: 2026, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio * Optionally with oil or gas burner Technical data: * Boiler output 100 kW Dedpfx Akjt Hfygo Tsuu * Hourly output up to 1,350 liters (10-78 °C) * Dimensions (H/W/D) approx. 160 x 110 x 160 cm * Empty weight approx. 320 kg ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2006, condition: used, machine/vehicle number: BSxx, Demag roller trolley chassis crane trolley trolley EU RU 11 Payload 1350KG Dujdpfx Akerfwncs Tju Width adjustable: 10-22cm - 50 pieces 95 euros 22-30cm - 6 pieces 115 euros Used Item location is 75053 Gondelsheim Shipping possible via DHL package, large quantities via shipping company See pictures

Condition: used, Four-side planer Dodpjlc Id Iofx Ak Tjuu

Condition: good (used), Elco gas burner EL4.135G-ROA ,1350kw Dujdpfopiqlyex Ak Tsu

Condition: excellent (used), I offer a professional sine magnetic table from the renowned German company K. JUNG GmbH Göppingen. This device is designed for the precise clamping of parts during grinding, measurement, and tooling operations. Specifications: • Manufacturer: K. JUNG GmbH Göppingen • Type: Sine magnetic table (tilting) • Magnetic workpiece clamping • Adjustable tilt angle with angular scale • High precision • Robust cast iron construction Dedpoza Hl Ejfx Ak Tsuu • Original wooden transport case Included in the set: • Magnetic table • Original wooden case • Documentation and setting table • Clamping elements as shown in the photos • Operating keys Condition: • Used item • Magnetic surface in very good condition • Normal signs of use and storage • Complete set as shown in the photos Ideal for: • Tool grinders • Surface grinders • Tool rooms • Precision workshops • Production and maintenance The item sold is exactly the one shown in the photos.

Condition: excellent (used), functionality: fully functional, Wide belt sander Costa C70 350 Working width: 350 mm Number of units: 1 Total power: 14 kW Duedpfxoyi A Sye Ak Tsu

Condition: excellent (used), Year of construction: 1999, H+K Four-Side Planer & Thicknessing Machine Quadroplan 180 Planing width: 20 - 180 mm Planing height: 5 - 120 mm Infeed table length: 2,100 mm Separate motor for each spindle Dujdpjydmawsfx Ak Teu Upper spindle motor: 5.0 kW Lower spindle motor: 4.0 kW Left spindle motor: 4.0 kW, automatic flow head Right spindle motor: 4.0 kW Max. spindle speed: 6,000 rpm Spindle diameter: 30 mm Max. feed speed: 8 m/min Cardan drive feed Feed motor power: 0.75 kW Total connected load: approx. 18.0 kW, 400 V, 50 Hz Extraction ports: 2 x 120 mm, 1 x 140 mm, 1 x 160 mm Dimensions (L x W x H): 3,370 x 1,330 x 1,500 mm Weight: approx. 1,280 kg Planing height adjustment, motorized with digital display Planing width adjustment, motorized with digital display Pneumatic spindle locking Unpowered outfeed roller Automatic centralized lubrication Automatic star-delta switching INCLUDES 4 reversible knife cutterheads INCLUDES operating manual & circuit diagram CE certified All bearings NEW All drive belts NEW Note on used machines: • Errors in technical details and prior sale excepted. • Prices listed are ex location – free loaded! • Machines have been cleaned and function tested. • All machines are sold as inspected, with no warranty or liability. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)

Condition: ready for operation (used), Siemens 1FK7042-2AK74-1AH0 synchronous motor SN: YFP0647013502001, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos, The agreed sales discounts do not apply to this item. Please ask for price separately! Dedpfx Aevgpi Ask Touu

Condition: ready for operation (used), Stöber K21R 80 K4 TLB 960 geared motor with C403Q1350D gearbox SN: 1926741, used, in good condition, 100% operational, delivery as shown in the photos Dedpfx Aex Dwc Isk Tjuu

Year of construction: 2000, condition: used, Used filterless hopper loader Dedpedlpynjfx Ak Teuu

Condition: excellent (used), For sale: Professional tool holder SK40-12×50-K, compliant with DIN 69871 AD/B. Each holder is fitted with a mounted end mill (visible in the photos). Mounting type: SK40 Sleeve: Ø12 mm Grip length: 50 mm Dodpoxcg H Hsfx Ak Tjuu Standard: DIN 69871 AD/B Condition: used, fully functional, ready for operation Please note that several units are available, all in the same Ø12×50 size.

Condition: excellent (used), For sale: professional ORION milling holder – German precision and top-quality workmanship. • Type SK40 Ø8-100 K • DIN 69871 AD/B standard – central coolant supply through the spindle • Weldon clamping (side screw) for Ø8 mm tools • Total length 100 mm • Very good condition, used – fully functional • Complete with tool (milling cutter / drill as shown in the photo) Ideal for CNC machining centers and milling machines with SK40 taper. Duodpexcgygsfx Ak Tsu

Condition: excellent (used), For sale: used Klauke K18 press. The professional ENERGOTYTAN KLAUKE K18 mechanical press is designed for the toughest electrical installation tasks. Its robust construction, suitable for both indoor and outdoor use, ensures reliable operation Djdpfxjw Slkdo Ak Touu

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, vibratory feeder bowl feeder make: E+K SORTIERSYSTEM type: EMSE-55GU trough diameter: 800 mm; voltage: 230 volts 50Hz protection: ip 44 vibration: 3000 vibration controller: REOVIB MFS 168 Sick sensor adjustable height frame inclusive dimensions: height: 1400mm width: 900mm Dusdpjicnicsfx Ak Tsu weight: 550 kg

Condition: used, functionality: fully functional, Jointer-planer, thicknesser SCM MiniMax FS 30 Specifications: • Condition – used, after a comprehensive overhaul • Manufacturer – SCM MiniMax series • Model – FS 30 • Working width – 300 mm • Working height of the thicknesser – 240 mm • Table length – 149 cm • Noise-reducing combs near the shaft Duedpfxsza E H Ij Ak Tsu • Motor power – 1.85 kW (220V – can be changed to 380V) • 3-knife shaft for traditional knives (diameter 70 mm) • Side table 43 x 22 cm for a drill • Head with a drill chuck for drills with a diameter of 16 mm • Original paint • Weight 260 kg • Overall dimensions 150 x 105 x 102 cm (length x width x height) Additional information: • The machine is in good technical condition and ready for immediate use • The presented photos show the actual condition of the item being sold • Possibility to switch on and test the device on-site • Free training on how to operate the machine (at the company's premises) • The price listed in the auction does not include VAT and transport costs Financing and transport: • We arrange transport using the MDD fleet, courier companies, or external carriers • We offer financial support in the form of leasing or lease financing

Condition: good (used), 750 litre vacuum cutter direct from Bankrupt meat-free factory. The machine was rebuilt and only used for a short time before the company went Bankrupt. Dusdpfxjx N Nlze Ak Teu

Condition: good (used), Technical data for pallet rack beam: Racking system: Jung Heinrich Type: MPB Scope of delivery includes: 01x pallet rack beam, new Material color: hot-dip galvanized Box profile: 160 x 50 x 1.75 mm Dodpsx Hpgyofx Ak Touu Beam type: AUF'B'E0436 Connector: 4 HK (hooks) Clear span: 3,400 mm 02x safety pins, used Design: fully galvanized For securing the longitudinal beams Against unintentional lifting out Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Should you require transport or shipment of this item, additional costs will apply, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for the pallet rack system: Rack system: SSI Schäfer Type: K Technical data for installation: Number of rack rows: 01 unit Length per rack row: 15,520 mm Number of bays per rack row: 05 units Number of levels plus ground level: 03 units Technical data for volume: Pallet positions per bay: 12 units Number of pallet positions per row: 60 units Total number of pallet positions: 60 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n.d. Max. weight per pallet: 700 kg Scope of delivery: 06x pallet rack uprights, used Material color: Sendzimir galvanized Profile dimensions: 90 x 75 x 2.5 mm Including horizontal and diagonal braces, upright protectors and base plates The uprights are pre-assembled (bolted lattice construction) Height: 5,800 mm Depth: 1,100 mm 30x pallet rack beams, used Material color: orange Box section: 110 x 50 mm Clear span: 2,995 mm Connector: 2 HK (hooks) Max. load per pair of beams: 2,100 kg, with uniformly distributed load 60x safety pins, used Material color: Sendzimir galvanized For securing the horizontal beams against unintentional lifting 24x wedge anchors, new Manufacturer: Hilti Duedpfx Akjywi Ncj Tsu Model designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 12x shims, used Design: fully galvanized For leveling uprights set up on uneven ground 01x load plate with field and bay load specifications, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipping of this item will incur extra costs, which can be quoted separately depending on the delivery location and scope of delivery.