Used Demag Ergotech 200/560-840/120V Multi for sale (23,173)

Condition: used, Year of construction: 2002, Opportunity to buy a DEMAG injection moulding machine with 1000T clamping force and 140000 working hours. Can be inspected under power upon appointment. Availability: 06/2026 Please Note: Ijdpjyq Dqgjfx Acheba The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Clamping force: 1000 tons Opening stroke: 1250 mm Min. mold height: 500 mm Max. mold height: 1200 mm Distance between tie rods: 1400 × 1120 mm Plate size: 1950 × 1670 mm Screw diameter: 80–110 mm Injection volume: ± 2000–3800 cm³ Shot weight (PS): ± 1800–3400 g Injection pressure: up to ≈2380 bar Total weight: 72.5 tons (72,500 kg) Total length: 13,184 mm Total width: 3,175 mm Total height: 2,925 mm Max. pressure ($P_{max}$): 190 bar Max. flow rate ($Q_{max}$): 486 l/min System current: 409 A Heating current: 154 A

Condition: used, Year of construction: 2001, Clamping force: 350 t Platten dimensions: 1040 x 950 mm Distance between tie bars: 710 x 630 mm Screw diameter: 50 mm Shot weight: 400 g Shot volume: 442 cm3 -2 core pullers -2 air valves, controllable hot runners: 1-16 chanel -1 kaskade Ibodpfx Acsva Ht Sohsa Type: Horizontal Drive: Hydraulic

Condition: used, Year of construction: 2001, Demag ergotech concept 800/420-310 (2001) Ibedjyyzqwjpfx Achsa

Condition: good (used), Year of construction: 2003, Demag ergotech extra 800-430 (2003) Iedsyyzi Hspfx Achsba

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW Ibjdpozc Ndcjfx Achsa All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Ibjdpfxezc Nfme Achoa Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), Year of construction: 1999, Demag Ergotech systems 500/200 Closing force 50 tons Year of manufacture 1999 Stroke 30 mm Approximate injection weight 90 Tie bar spacing 35.5 x 35.5 Ijdpfx Acjg Emvtohsba

Condition: excellent (used), Year of construction: 1997, Demag Ergotech Ibedpfx Aod N Ux Dochja 150-440/610 Closing force 150 TO NC 4 Nozzle diameter 40 mm Year of manufacture 1997 Distance between tie bars 50x50 Injection volume 255 cm³ Shot weight 230 g

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 878 0730, clamping force: 2,500 kN, clearance between the columns: 630 mm, mold height (min.): 330 mm, ejector force: 69,000 N, ejector stroke: 200 mm, opening stroke: 675 mm, plate length: 950 mm, plate width: 950 mm, total length: 6,500 mm, total width: 1,900 mm, total height: 2,300 mm, overall weight: 13,100 kg, heating capacity: 27 kW (36.71 HP), pressure: 190 bar, pump power: 4,500 W, power: 72 kW (97.89 HP), type of input current: AC, input frequency: 50 Hz, input voltage: 400 V, input current: 167 A, Equipment: documentation/manual, Technical Specifications – Demag Ergotech 250/630–1450 Clamping force: 2,500 kN Tie bar spacing: 630 × 630 mm Maximum opening stroke: 675 mm Iedpfxow Hq Hhs Achjba Minimum mold height: 330 mm Maximum mold height (with WA): 710 / 830 mm Platen size (H×V): 950 × 950 mm Maximum mold weight: 3,300 kg Maximum weight of moving mold half: 2,200 kg Ejector stroke: 200 mm Ejector force: 69 kN Injection unit Screw diameter: 50 / 60 / 70 mm Injection pressure (at 400 °C): 2,426 / 1,905 / 1,400 bar Injection volume: 530 / 763 / 1,040 cm³ Shot weight (PS): 480 / 690 / 940 g Heater output (screw cylinder): 14.8 / 23.1 / 27.0 kW Drive & Power Supply Pump unit: 37 / 45 kW Total installed power: 52 / 60 / 64 / 72 kW Supply voltage: 3×400 V Frequency: 50 Hz Maximum current consumption: 167 A Dimensions & Weight Overall length: 6,500 mm Overall width: 1,900 mm Overall height: 2,300 mm Machine weight (net): 13,100 kg

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Ibedsx Sqi Hepfx Achoa Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Net weight (without oil): 13 800 kg TECHNICAL DATA (BY SCREW DIAMETER) ----- Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). INJECTION UNIT FEATURES ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Condition: excellent (used), Year of construction: 2015, year of last overhaul: 2025, Demag Systec 210-840 (2015) SERVO Manufacturer: Sumitomo SHI DEMAG Type of machine: Systec 210/580-840 Ijdpfszbg Ezjx Achsba Clamping force [kN]: 2100 Shot volume [cm³]: 358 Clearance between tie bars hor. [mm]: 580 Clearance between tie bars vert. [mm]: 580 Mold height min. [mm]: 340 Mold height max. [mm]: 690 Opening stroke max. [mm]: 575 Daylight max. [mm]: 1365 Year of manufacture: 2015 Machine dimensions L/W/H [mm]: 6022 / 1556 / 2090 Control unit and software version: NC3 Max. weight of entire molding tool [kg]: 3300 Screw diameter [mm]: 45 Screw design: 3 zone Screw relation (length/diameter): 20:1 Screw back flow valve: Yes Ejector system type: Hydraulic Installed heating power [kW]: 39 No. of integrated hot runner circuits: 12 Number of temperature control electrical valves: 28 Number of cascade controls: 2 Connection to central drying system: Yes Unloading robot system available: Yes Number of tempering units: 3 Tempering units max. temperature [°C]: 160 Machine oil capacity [l]: 400 Net power of hydraulic pump engine [kW]: 26

Condition: used, Year of construction: 2005, Demag extra 50-200 Clamping force: 50 ton Distance between tie bats: 355 x 350 mm Screw diameter: 22 mm Shot volume: 47 cm3 Shot weight: 42 g Pneumatic vent: 1x Iedpfx Asyypm Tschoba Hydraulic vent: 1x

Year of construction: 1999, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details. Ibodpfx Aeyxrt Tschsa

Condition: used, Year of construction: 2001, Clamping force: approx. 420 t Components: 2 Mold mounting height: approx. 651 / 1100 mm Opening stroke: approx. 400 / 880 mm Tie bar spacing: approx. 900 × 800 mm Horizontal screw diameter: approx. 60 mm Iodozl S Nlopfx Achoba Vertical screw diameter: approx. 30 mm L/D ratio: 1 / 20 Core pull: 4 Special equipment: Needle gate Hot runner zones: 36 Flow rate: approx. 243 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 156.5 A Current 2: 169 A Current 3: 100 A Weight: approx. 17.7 t

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 7814-0045, total length: 4,000 mm, total width: 1,500 mm, total height: 2,000 mm, Weight approximately 3000 kg Iedpfezqam Aex Acheba For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. The machine has not been inspected but was operational until the very end.

Condition: used, Year of construction: 2009, Due to a relocation of our production facilities abroad, we now have two injection molding machines of the EL Exis / Sumitomo Demag brand available. These are the EL Exis S 200 - 840 and 300 - 1450 models, manufactured in 2009, which we would like to offer you on a non-binding basis. The machines have been operated in our facility on a two-shift system. Only clear, glass-like PP random copolymer was processed. In addition to the injection molding machines, the side-entry robots from Wittmann are also included in the scope of supply. Ibsdpfxjznwaho Achja

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Ibedsx Uqb Iopfx Achsa Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Equipment: Core pull: 2x Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 862-1053, Plastic Injection Moulding Machine | Mannesmann DEMAG - Ergotech 5000-2300 Clamping force [kN]: 5,000 Number of components: 1 Clamping platen width [mm]: 1,300 Clamping platen height [mm]: 1,200 Clear tie bar spacing, horizontal [mm]: 900 Clear tie bar spacing, vertical [mm]: 800 Centering ring diameter [mm]: 200 Minimum mould installation height [mm]: 400 Maximum mould installation height [mm]: 880 Maximum opening stroke [mm]: 810 Iedpfxjygikws Achsba Maximum ejector stroke [mm]: 230 Thread [M]: 24 Maximum mould weight [kg]: 6,700 Maximum mould weight, moving side [kg]: 4,400 Screw diameter [mm]: EE1: 60 Maximum shot weight [g] PS: EE1: 800 Injection unit configuration: EE1: horizontal Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Loaded free on truck (Butzbach). #Tags: Mannesmann-DEMAG | Ergotec | Ergotech5000

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm Ibedpfx Aewvkgmschja injection shot weight in Polysterol: 149 g/PS closing pressure: 1250 kN

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm injection shot weight in Polysterol: 149 g/PS Ibedpfx Aowvkggochoa closing pressure: 100 kN

Condition: good (used), Year of construction: 1996, Motor for light-duty overhead cranes. Hook travel: 3 m Load capacity: 0.4 t Isdoy Urlnjpfx Achsba Width: approx. 500 mm Height: approx. 300 mm Depth: approx. 300 mm Weight: approx. 25 kg Condition: good, second-hand

Condition: excellent (used), Year of construction: 2001, operating hours: 70,180 h, clamping force: 800 kN, screw diameter: 40 mm, injection pressure: 1,830 bar, injection weight: 205 g, Demag Ergotech Viva 800-400 (144) Description without hopper General information Product Code: 144 Availability: In Stock Year of production: 2001 Brand: Demag Technical data Shot Weight: 205 g Clamping Force: 800 kN Screw dia: 40 mm Injection pressure: 1830 bar Tie bar distance: 400 x 400 mm Platen size: 590 x 580 mm Mould height min.: 250 mm Type of controls: NC4 Language: German Power: 26,1 kW Workinghours: 70180 h Weight: 3600 kg Ibsdpfxovvtx To Achsa Dimensions: 4,35 x 1,7 m Hopper: No Core pull: Yes

Condition: used, Chassis with friction wheel drive for DEMAG lightweight crane system, suitable for crane rails made from system profiles type KBK 2 and KBK II L. Type: DRF 200-B14-1-43, serial no.: 45950995. Travel speed: approx. 40 m/min = 0.67 m/sec. Motor power: 0.37 kW. Power supply: 400 Volt, 50 Hz. Drive motor: DEMAG, type ZBA 71 A2 B007. Ibedew Nxyyopfx Achoa KBK 2 / KBK2L trolley for suspension in crane track. Wheel diameter: 82 mm, wheel width: 21 mm, trolley width: 78 mm. Space requirement (L x W x H): 410 x 320 x 470 mm. Weight: 28 kg. In good condition.

Condition: used, Electric chain hoist, electric lifting unit, DEMAG crane, type DKES 2-200 K V2 DI with Dematik BUS control via crane control system Factory No. 61456646, Year of manufacture 2003 Load capacity: 200 kg Hook travel: 4.0 meters Main lifting speed: 14.0 / 19.2 m/min Fine lifting speed: 0.20 m/min Ijdpfx Ajgd Ipnochsba Chain size: 4.2 x 12.2 mm 1 load strand = 200 kg - with DKES2/5 500V control logic - without crane operating control - Dematik BUS control via crane control system - without trolley Mains connection: 400 volts, 50 Hz Rated power: 750 W Rated current: 2.4 A in good condition

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,642 h, screw diameter: 45 mm, total height: 2,213 mm, overall weight: 15,750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information. Additional equipment • Fanuc Robot Machine Benefits Qualitative Machine Benefits • Process data acquisition, mould protection Technical Machine Benefits • Mould height min: 350 mm / mould height max: 745 mm • Main electronic connection: 3/400 v 50hz • Programmable sequence, highly dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Extra Information Standard equipment: Support of the moving mould mounting platen via linear guides/ Ejector short / long stroke/ Interface for external printer (hardcopy)/ Individual axis movement optimization (activeAdjust)/ Four-stage mould closing and four-stage mould opening sequence/ Pump drive power II, increased (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3 phases + N + PE/ Mains connections drive / heating separate/ Data display coloured/ Oil cooler reinforced (cooling water supply up to 35 °C)/ Water connection for mould and machine cooling separate/ Basic version Europe/ Corrosion protection/ Paint finish: Deep black (RAL9005): Machine bed with internals, lower switch cabinet/ Signal white (RAL9003): Clamping unit, injection unit, nozzle guard/ Signal white (RAL9003): Fixed safety devices, upper switch cabinet/ Signal white (RAL9003): Safety doors/ Textured surfaces: Elastic machine bearings/ Digital and wear-free position measuring system (ultrasound/high-resolution rotary encoders for injection, mould and ejector movement)/ Mould connection dimensions type E (according to EUROMAP March '96)/ Centring diameter fixed platen: 160 mm/ Centring diameter moving platen: 160 mm/ Without side ejector plate/ Standard mold installation height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety gate is closed)/ Ejector with position control (p/F+v independently programmable, parallel to mold movement)/ Toggle lever oil lubrication/ Injection unit/ Optional equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for ultra-fine filtering in the bypass (activeCool&Clean)/ Ibsdpfx Ajx D Hntschja Socket 1 x Schuko (230V / 10A), can be disconnected via main switch/ Socket IECEE 3Ph / 400V-16A, can be switched off via main switch/ Flashing light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on movable tool plate (programmable)/ 6 pneumatic 5/2-way valves on fixed tool plate (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with non-return valves)/ Manual pressure relief for core pull 1-circuit/ Protective clothing on operator side widened (250 mm)/ Hot runner control 12 zones, integrated (2, 75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force control/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with emptying option/ Holding pressure switchover dependent on hydraulic pressure (with pressure recording)/ Nozzle contact pressure when mold is open (programmable)/