Used Edur Cbl 80 200/211 for sale (31,680)

Condition: good (used), Pneumatic cylinders, air cylinders, standard cylinders, compressed air cylinders -Manufacturer: SMC, pneumatic cylinder double version each open on one side -Type: C95SDB 80-200 Hedpew Dbw Eefx Achonr -Piston rod: Ø 25 mm -Stroke: 200 mm each -Pressure: max. 10 bar -Dimensions: 653/195/H130 mm -Total weight: 13.9 kg

Condition: excellent (used), CTS TSS-70/130 Temperature Shock Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Machine Type: Temperature Shock Testing Chamber / Temperature Testing Chamber Test Volume: approx. 130 liters For sale is a used temperature shock testing chamber from the manufacturer CTS. The system is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, quality assurance, and research and development. Technical Data Hot Chamber: +50 °C to +200 °C Cold Chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Cycle time: < 10 seconds Temperature adjustment rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min Cooling rate: approx. 4 K/min Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K External dimensions approx.: 2335 x 940 x 1820 mm (W x D x H) Loading dimensions approx.: 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions approx.: 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight approx.: 950 kg Power connection: 400 V 3/N / 50 Hz Power consumption: approx. 16.6 kW Rated current: approx. 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant Pre-cooling Stage: R404A, 4.0 kg Refrigerant Cooling Stage: R23, 0.6 kg / 10 bar Operating overpressure PS: 25 bar Operating Requirements Water-cooled design Cooling water connection required Compressed air connection required Operation possible only with cooling water and compressed air Cooling water inlet: 3 - 6 bar Equipment CTS Control Panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Trolley with lead screw drive Test chamber / trolley made of stainless steel Hjdpfxezf Ibko Achsnr Insert basket made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Scope of Supply 1x CTS TSS-70/130 Temperature Shock Testing Chamber Insert basket / test chamber equipment Existing documentation / files Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The device can be switched on Scope of supply as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Condition: used, Year of construction: 2002, Centerless Grinding Machine BOCCA MALANDRONE R 80/200 CNC GENERAL CHARACTERISTICS: Grinding Wheel Dimensions: Ø610xØ304,8x300 mm Regulating Wheel Dimensions: Ø355xØ152,4x300 mm Hnsdpfjhzvkdex Achjr

Condition: excellent (used), Year of construction: 2006, operating hours: 69,000 h, functionality: fully functional, machine/vehicle number: 163769, Here we offer a permanent maintained injection molding machine. from the following machine we have other machines of the same type and same year in stock also with Geiger Robot Manufacturer Engel Type Victory 200/80 Tech year of construction: 2006 Control system: CC 200 Hsdpfom Nclvjx Achenr Extras -installed Languages: German Englisch -25 mm (wear and corrosion protected) - control CC200 - enlarged clamping plates (B plates) - minimum installation height 250 mm - maximum platen distance 700 mm - quality switch / PD protocol + graphics - 5 x CEE 400 V / 3 x Schuko 230 V - 4 freely programmable inputs and outputs - handling interface Euromap 12 - Host computer interface Engel EMS - Geiger EA Mini 2001 SLI (#156686 0504 4417 / year 2005) - without material hopper or conveyor Clamping unit clamping force: 80 to./ 800 kN tie bar dimension: tie bar-less clamping platens: 730 x 600 (hxv) platen distance: 700 mm max installation height: 250 mm min. opening stroke: 450 mm Injection unit screw diameter 25 mm stroke volume: 69 ccm injection pressure: 2090 bar / 2400 increased Weight: 5,200 kg. dimensions: 4,00 mtr. x 1,40 mtr. x 2,00 mtr LxWxH from our warehouse Hannover /Germany free loading on truck of the buyer or free delivery against freight reimbursement Viewing under electric power possible functional guarantee

Condition: good (used), Year of construction: 2001, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, For sale is an injection molding machine of the brand Demag, type 80/420-200 System The machine is in good and functional condition ATTENTION: No backup disks available Technical data: Year of manufacture: 2001 Clamping force: 800 kN Tie bar distance V: 420 mm Tie bar distance H: 420 mm Plate size H: 590 mm Plate size V: 600 mm Minimum installation height: 250 mm Maximum plate distance: 700 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 41 kN Tool weight: 700 kg Hnjdonfu I Iepfx Achjr Screw diameter: 30 mm Dimensions: approx. 4.5*1.50*2 m Weight: 4t Transport and loading can be organized Europe-wide at extra cost on request. Prices plus VAT Inspection possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: good (used), Your contacts at our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Hsdsx Huh Aopfx Achonr General information about the item: This item is only offered for collection. If transport or shipping of this item is requested, additional costs will apply, which can be quoted separately depending on the place of delivery or scope of delivery.

Condition: good (used), Year of construction: 1994, functionality: fully functional, Electromagnetic belt separator Steinert length: 1500mm width: 900mm Hjdpfx Acsvyuy Hshonr Year of manufacture: 1994 Protection class of magnetic housing IP44 Magnet power 2,2 kW; Material flow rate 1.8 m/s; Drive power 2,2 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; weight: 2200kg

Condition: excellent (used), Year of construction: 2016, Machine designation: VC 330H/200V/80 Combi Clamping unit: Clamping force: 80 tons Opening stroke: 458 mm Ejector stroke: 100 mm Ejector force: 39.8 kN Injection unit 1: Screw diameter: 25 / 30 / 35 / 40 mm Max. swept volume: 79 / / 154 / 201 cm³ Screw speed max: 400 / 425 / 400 / 320 rpm Screw speed max current: 425 rpm Hsdpfx Aceyyzzvehonr Injection rate: 67 / 97 / 132 / 172 cm³/s Injection rate increased: 50 / 71 / 97 / 127 cm³/s Specific injection pressure: 2401 / 2181 / 1595 / 1225 bar Specific injection pressure increased: bar Nozzle stroke: 500 mm Nozzle contact pressure: 48.9 kN Injection unit 2: Screw diameter: 15 / 18 / 22 / 25 mm Max. swept volume: 18 / 25 / 99 / 49 cm³ Screw speed max: 480 / 480 / 480 / 480 rpm Screw speed max current: 480 rpm Injection rate: 37 / 54 / 149 / 104 cm³/s Injection rate increased: 28 / 40 / 98 / 77 cm³/s Specific injection pressure: 2200 / 2200 / 1451 / 1230 bar Specific injection pressure increased: bar Nozzle stroke: 380 mm Nozzle contact pressure: 40.7 kN Type: Multicomponent Drive: Hydraulic

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller manufacturer: Siemens, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Number of axes: 4 Travel in X-axis: 2,000 mm Travel in Y-axis: 500 mm Travel in Z-axis: 550 mm C-axis rotation: 360° Control system: Siemens CNC Table length: 2,600 mm Table width: 550 mm Tool holder: ISO 40 Main spindle power: 22 kW Spindle speed max.: 12,000 rpm Positioning accuracy: 0.01 mm Travel speed: 667 mm/s MACHINE DETAILS Control system: Siemens CNC Connected power: 24 kW Dimensions & Weight Dimensions (L x W x H): 7,500 x 3,700 x 2,500 mm Hsdpfx Acozuw Aijhonr Empty weight: 9,600 kg Transport packages: 2 EQUIPMENT Documentation CE marking

Condition: new, GMN TSE 80-16000 / 1.2 high-speed spindle SP: 10-12000 :384568, unused in opened original packaging, 100% functional, scope of delivery as per photos Hedpfomq H T Hox Achsnr

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, FTC-200 Tracked Cone Crusher; It is produced in the form of feeding bunker, generator, cone crusher and stock belt.FTC-200 Tracked Cone Crusher, which is moved with a remote control on a steel track, successfully completes all commands by moving on its tracks in all difficult climatic conditions and rough terrain.FTC-200 Crawler Cone Crusher, which is delicately designed and meticulously manufactured for crushing stone, is the leading crawler crusher plant in the industry with its weight of 41,000 Kg and a crushing capacity of 100-180 T/H per hour. Eliminates Infrastructure Requirement FTC-200 Tracked Cone Crusher does not require an extra infrastructure as a production method, it can be moved by remote control and adapts to all difficult terrain conditions. Belt Feeder The Belt Feeder is the system in charge of quickly sending the loaded products to the crusher for the crushing process.It has a belt feeder motor protection system that gains mobility thanks to 2 motors. Thanks to this system, malfunctions that may occur as a result of overheating are prevented.The working intensity of the Belt Feeder and the crusher is coupled with the automation system. This feature works in two steps. Step 1: If the density of the crushed product in the crusher is high, the amperage of the crusher rises and this rise is detected by the automation system, the bunker transfer stops.It prevents product accumulation in the crusher feeding chute. This feature prevents the crusher from being worn out. Step 2: If the density of the crushed product in the crusher is low, the amperage of the crusher decreases. This decrease is detected by the automation system and bunker transfer increases. The feeding hopper delivers the products to the crusher faster. This feature keeps the production capacity at the maximum level. Cone Crusher Cone crushers are the crusher of FTC-200 Tracked Crushing Plant that can easily crush hard stones.The power transferred from the engine to the gear shaft is sent to the hub with gears.Thanks to the core and concave inside the crusher, it crushes the stones and breaks them into pieces. Stock Belts With its foldable structure, it minimizes the dimensions of the machine it is on. Optionally, the number and length of tapes can be increased upon the request of the user.10 mm EP 125 4-ply Band elastics, moving on 4mm st 37 Twisted Sheet, perfectly transport the aggregate coming out of the screen to the area desired by the user in the most efficient way.Belt Elastics, which are produced resistant to wear, will never let you down and offer many years of service life. Hnsdpfx Aozibahschor Pallet System The basic element that enables the movement of the FTC-200 Tracked Cone Crusher is the pallet system.Pallets carry the entire weight of the crusher. FABO, which does not ignore the importance of the pallet system on the crushing plant, has carried out various R&D studies and has revealed the pallet system that provides maximum durability, low maintenance cost and long-term service to its user in accordance with A1 Quality CE standards.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, power: 172 kW (233.85 HP), Conveyor belt furnace, electrically heated, type DLE 600/200/3000 G for soldering or annealing under an Exogas atmosphere. -Heating capacity: 172 kW -Soldering/annealing under an Exogas atmosphere -Conveyor belt width: 800 mm Hodpfx Acsy Ddtiohsnr -Clearance height above the belt: 200 mm -Heated length: 3000 mm -Net throughput capacity: 254 kg/h -Maximum temperature: 1120 °C

Condition: used, mileage: 6,39,480 km, power: 427 kW (580.56 HP), first registration: 07/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2026, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, loading space length: 4,100 mm, loading space width: 2,430 mm, Year of construction: 2016, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, * German vehicle, second owner, serviced according to maintenance schedule, very good condition * Retarder * Differential locks Hnedpszhhm Ssfx Achjr * Auxiliary heater * 2 x bunk * Refrigerator compartment * Auxiliary heater * Reversing camera * Navigation, TV * Trailer coupling with hydraulic connections * Alloy wheels * Tires 385/65 at the front, 315/80 at the rear, 70-80% tread * Steel tipper body 4.10m x 2.43m, lashing points, automatic side boards at the rear, spring-assisted side flaps * Underrun protection, foldable * Gross vehicle weight 40,000 kg, vehicle length 7,900 mm * Crane HIAB 211 EP-4 HIDUO, wireless remote control, 410-degree swivel range, 4 x hydraulic extension, 5th + 6th control circuit, hydraulic outriggers * I would be happy to send a video via WhatsApp * WhatsApp: * Polish contact, [Polish contact details]: * Sale only to commercial customers, no warranty, all information without guarantee, subject to prior sale.

Condition: used, mileage: 6,39,480 km, power: 427 kW (580.56 HP), first registration: 07/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2026, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, loading space length: 4,100 mm, loading space width: 2,430 mm, Year of construction: 2016, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, * German vehicle, second owner, well-maintained according to service schedule, very good condition * Retarder * Differential locks * Auxiliary heater * 2 x bunk Hnsdpfx Aezhhmxechjr * Refrigerator compartment * Auxiliary heater * Rear view camera * Navigation, TV * Tow hitch with hydraulic connections * Alloy wheels * Tires 385/65 at the front, 315/80 at the rear, 50-70% tread * Steel tipper body 4.10 m x 2.43 m, lashing points, rear drop sides, spring-assisted side flaps * Foldable underrun protection * Gross vehicle weight 40,000 kg, vehicle length 7,900 mm * Crane HIAB 211 EP-4 HIDUO, remote control, 410 degrees swivel range, 4 x hydraulic extension, 5th and 6th control circuit, supports hydraulically extendable * I would be happy to send you a video via WhatsApp * WhatsApp: * Polish contact: * Sale only to businesses, no warranty, all information without guarantee, subject to prior sale.

Condition: used, Ersatzmesser für Schneidmaschinen - Spare Knife for GuillotinesPolar - Wohlenberg - Perfecta - Schneider Senator 72 - 80 - 92 - 115 - 137 - 155 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Hnsdpsh Ax Scofx Achjr Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2023, condition: ready for operation (used), A Herzog two-head square braiding machine is available. Number of carriers 1/2: 12/16, tandem carrier configuration: 8, horn gear diameter: 150mm/200mm, speed 1/2: 175rpm/131rpm, bobbin diameter: 55mm, bobbin height: 130mm, bobbin capacity: 265cm³. Including 2x change gears, 2x double gears, 28x bobbins, 28x thread tension springs, 2x take-off discs, 6x wooden drums, 8x carrier tubes, 2x braiding plates and one carrier guard. The machine has only been operated for a few thousand running meters and is therefore in very good, near-new condition. Documentation available. An on-site inspection is possible. Hedpfx Acezqfx Dshonr

Condition: used, functionality: fully functional, Complete screw conveyor made of stainless steel. Hsdpjzp U Acefx Achsnr Diameter: ø200mm Length: 4,800mm Manufacturer: DTS

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 19.5 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm Hnodpfx Acociw Shohjr -Protection class: IP 54 -Dimensions: 520/230/H240 mm -Weight: 27.7 kg

Condition: used, Clamping plate with T-slots, tensioning aid, plate field, welding table, welding table, plate boring machine -Width: 200 mm -Length: 1800 mm -Height: 45 mm Hnedpfod N Hzlsx Achsr -Groove width: 11 mm -Weight: 117 kg

Condition: used, Gear motor, electric motor, three-phase motor -Speed: 13/80 rpm -Power: 0.063/0.4 kW Hnsdpfxsckp S Te Achjr -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 65 -Brake -Dimensions: 570/240/H200 mm -Weight piece: 37 kg

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1800 mm Hodpswn D Eysfx Achonr -Cross-section: 200 x 60 mm -Recording: see photos -Transport dimensions: 2060/1080/H200 mm -Total weight: 487 kg

Condition: good (used), Precision balance, spring balance, tension force gauge -Manufacturer: Pesola, precision spring balance type Macro-Line 80196 -Measuring range: 200 Newton -Division: 2 N -Dimensions: 400/40/H40 mm Hnjdpfxer H Nllj Acher -Weight: 0.5 kg

Condition: good (used), Gear motor, electric motor, electric gear motor Hnsdscqp Hpopfx Acher -Speed: 17 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 410/230/H190 mm -Weight: 21.6 kg

Condition: used, Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders -Manufacturer: Bahco, hydraulic cylinder lifting cylinder type CR 100-200 -Stroke: 150mm -Piston: Ø 100 mm Hnodpfx Acekuct Ishsr -Pressure: max. 800 bar -Number: 5x cylinder available -Price per piece -Dimensions: Ø 300 x 430 mm -Weight: 93 kg/pc.

Condition: good (used), Underframe for conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand -Base: height adjustable -Type: Width 1180 mm Hnodpfev U Tzljx Achsr -Height: 200 mm, adjustable -Number: 14 trusses available -Price: per piece -Roller conveyor: suitable in stock, see ID 35086 -Transport dimensions: 1180/150/H200 mm -Weight: 4.9 kg/piece