Centerless grinding machine

BOCCA MALANDRONE R 80/200 CNC

Year of construction: 1996, condition: used, Centerlees Grinding Machine BOCCA MALANDRONE R80/200 CNC GENERAL CHARACTERISTICS: Nwodpfshzvaxjx Akfsf Grinding Wheel Dimensions: Ø610xØ304,8x300 mm Regulating Wheel Dimensions: Ø355xØ152,4x300 mm

Condition: used, Year of construction: 2005, travel distance X-axis: 1,020 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, total height: 2,770 mm, total length: 3,300 mm, total width: 2,687 mm, The Micron VCE 1000 Pro is a powerful and precise CNC machining center designed for demanding milling tasks. With travel distances of 1020 x 560 x 600 mm, it enables flexible machining of medium-sized workpieces. The machine is equipped with a Heidenhain iTNC 530 control, an ISO 40 tool taper, and a spindle speed of up to 10,000 rpm, making it ideal for high-precision, high-speed machining. Nwodpfxsxyig Re Akfsf The robust table with a 1000 x 560 mm T-slot area supports workpieces up to 1,350 kg. Fitted with a chip conveyor, coolant pump, and a 18.5 kW motor, the VCE 1000 Pro offers a reliable combination of power and precision.

Condition: used, SPE Renergi Low Temperature Dryer. Nwedswp Rqfjpfx Akfjf The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Working area Control: Fanuc 31i-B5 Travel X: 700 mm Travel Y: 400 mm Travel Z: 400 mm Clamping surface: 850 x 410 mm Nwsdpfxjydi Hys Akfef Max. table load: 400 kg Rapid traverse X/Y/Z: 54 m/min Positioning accuracy: 0.006 mm Repeatability: 0.004 mm Spindle Technology: Direct drive Max. speed: 24,000 rpm Max. power: 26 kW Max. torque: 35 Nm Tool holder: BBT 30 Tool changer Tool magazine: 21 positions Tool change time: 1.3 s Equipment Coolant supply: ICS 20 bar Chip removal: chip conveyor

Year of construction: 2026, condition: new, functionality: fully functional, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Nwedpfx Akjwg R Rtofef

Condition: good (used), Year of construction: 2012, Parts shown by hand not come. Nwedpfxsx Awzbs Akfsf X1020mm Y610mm Z610mm 12.000 rpm,25 KW, 160Nm Control unit: HEIDENHAIN iTNC 530, 4th axis will come without parts shown by hand.

Condition: good (used), Year of construction: 2017, functionality: fully functional, LINEAR PET BLOWING MACHINE SET with auxiliary equipment Nwodjquuvrjpfx Akfef AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L AUXILARY EQUIP 1. Chiller - M.T.A S.p.A - TAE EVO 051 2. LOW Pressure compressor - SHAMAL 45kw 3. High Pressure compressor - KAESER Booster N 753 - G 13 bar / 40 bar" 4. Air Dryer 5. Receiver tank - Low pressure - MAX 16Bar 6. Receiver tank - High pressure - MAX 45Bar

Condition: excellent (used), Perfectly preserved six-spindle INDEX MS 25 automatic lathe with six transverse and six longitudinal tool guides. The price is negotiable depending on the selected additional equipment: clamping pods, tools, chip conveyor, etc. The machine is still in production. Viewing possible by arrangement. Nwjdpfx Aoqhkukekfef

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3000*1524mm Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Cutting Speed: 0-100m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Nsdjhwrgtepfx Akfswf Cooling Mode: WATER COOLING

Year of construction: 2024, condition: new, New mechanical and electromagnetic clutches and brakes for Bulgarian machine tools of the following types: CU400, CU500, CU502, CU580M, CU582, C11MT, C11MB, C11, C13B… We also offer a wide selection of various spare parts for the above-mentioned machine tools, most of which are available from stock, while for the rest we offer the fastest possible delivery times. We cordially invite you to cooperate! Nsdpfxsv Rpn Tj Akfewf