Used Esterer Driven Splitting Wedge Esterer Arta/C for sale (57,634)

Condition: used, Year of construction: 2015, Processing Specifications: Maximum processing width: 610 mm Minimum processing width: 210 mm Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration Minimum draw length without interruption: 50 mm Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration Minimum draw length with interruption: 100 mm Maximum cycle rate: 210 cycles/min Maximum line speed: 50 m/min Unwinder: Maximum reel diameter: Ø1,000 mm Maximum reel weight: 700 kg Web width with 48-inch unwinder: 410–1,220 mm Web width with 60-inch unwinder: 410–1,520 mm Processable Materials: Polyester laminates: from 40 μm BOPP laminates: from 40 μm CPP laminates: from 40 μm Nylon-based co-extruded films: from 50 μm EVOH-based co-extruded films: from 50 μm LD/LLD-based co-extruded films: from 50 μm BOPP film: from 30 μm Aluminum foil structures Coated paper Tyvek Maximum sealable film thickness: 150 μm Pouch Types: • TSP pouches • Stand-up pouches • Supported-film pouches Electrical Data: Power supply: AC, 3 Phase Available voltage: 20 / 240 / 380 / 415 / 480 V ±6% Frequency: 50/60 Hz Machine-specific supply: 380 V, 50 Hz, 3 Phase Machine electrical load: 35 kVA Pneumatic Requirements: Air consumption: 1,000 L/min at NTP Installed configuration air requirement: 3,000 L/min Minimum operating pressure: 6 kg/cm² Air supply must be free from moisture and dust Isdpfx Aszqt Dneiyebb Cooling Water: Water consumption: 20 L/min Required water temperature: 15–17 °C Standard Machine Features: • Servo-driven film indexing • Microprocessor-based control • Operator console for process parameter settings • Servo tension dancer assemblies with feedback control • Tail-feed-assisted film draw mechanism • Servo-driven reciprocating sealing system • Servo-actuated sealing bars • Progressive sealing and rapid seal-area cooling • Three-stage bottom sealing followed by cooling • Adjustable sliding sealing stations • PID temperature controllers with auto-tuning • Photo-registration mark scanner • Guillotine-type shearing station with servo fine adjustment • Trimming station with trim removal • Recipe memory for frequently used jobs • Adjustable sealing temperature, pressure and dwell time • Automatic stacking system

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. Iodpfjzgr Iqex Aiyjbb HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Condition: ready for operation (used), Year of construction: 1997, operating hours: 13,465 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, table load: 1,000 kg, controller model: Heidenhain iTNC 430, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 450 mm Travel range, Z-axis: 400 mm Table load: max. 1,000 kg Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain iTNC 430 Operating voltage: 400 V Control voltage: 24 V Machine weight: approx. 6,000 kg Operating hours: 48,690 h Spindle hours: 13,465 h EQUIPMENT Tool holders SK 40 Iodpfx Aezwmx Sjiyobb Documentation Heidenhain programming manual Machine vise Clamping jaws

Year of construction: 2014, condition: used, Manufacturer: Hosokawa Hosokawa Alpine Model: Contraplex 160 C Year : 2014 Type : pin mill + associated equipment Documentation : Hosokawa Alpine Contraplex 160 C Fine impact mill with two driven pin discs Motor power (frame side) : 7,5 KW Isdox R Avvepfx Aiyebb Pin speed (frame side) : 16 500 rpm Number of rows of spindles (frame side) : 3 Motor power (door side) : 5,5 KW Pin speed (door side) : 12 000 rpm Number of rows of spindles (door side) : 2   Powder transfer Bohle MCL 300 container + stand Forced convection vacuum system Unloading hopper Handling trolley  

Condition: good (used), Year of construction: 2001, Built in: 2001-2003 Size: max 290 x 420 x 65 mm; min 100 x 105 x 3 mm Speed: max 15.000 c/h Equipment gathering machine • chain tensioner • 12 stations • gatherer ZU 840 • 8 streamfeeder STA 840 • reject unit AS 840 controls • opticontrol signature image reader intermediate elements • reject unit • jogging element perfect binder • Copilot • Monitor control • 23 clamps • jogging station • resting table • fold pressing station • milling and roughening station • equalizing-leveling station • hotmelt spine gluing unit • hotmelt side gluing unit Isdpfjiz Aibsx Aiyobb • 2 premelters • stream cover feeder • cover pressing station • smooth lay down device conveyor system • bypass for splitting saw splitting saw • turnover belt • connected with three knife trimmer • destacker • information three knife trimmer: HD 151 P compensating stacker • information compensating stacker: Müller Martini CB 16 standard accessories • pv pressure-vacuum pump • 1 set of electrical diagrams • 1 set of spare part catalogues • 1 set of tools further information • machine can be tested in production • condition: working condition

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 679 ccm Clamping Unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system for hot runner zones x 10 Hardened injection unit – bimetallic Energy-efficient machine – features a system with 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Iedpfx Aijzy In Hoyjbb Krauss Maffei LRX Easy Control 100 Robot Year of manufacture: 2019 4-axis robot: 3 axes driven by servo motors (electric); axis C – pneumatic Touch control panel Safety package for robot Robot with interface, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in live technical demonstrations at our premises in Łódź. Price: Upon request

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Ibsdpfxoxmirgo Aiyeb Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking

Condition: used, functionality: fully functional, Well-maintained, inclined cross conveyor from Esterer, originating from a small sawmill. Drive via geared motor. 6 chain strands. Spacing: 2300 mm - 1500 mm - 1200 mm - 1000 mm - 1200 mm. Isdpfx Aiezw Epcoyobb Conveyor length approx. 3000 mm. Chain pitch 80 mm.

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 208-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 52 mm Shot weight: 502 g Injection pressure: 1893 bar Dosing volume: 552 ccm Clamping unit: Clamping force: 208 t Tie bar spacing: 530x530 mm Platen size: 790x765 mm Ejector: electric Clamping unit: toggle Control system: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine has been serviced in Germany Samfacc robot Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Ibodpfozy Iztex Aiyjb Safety package for robots Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt available at an additional cost Dimensions: Weight: 6800 kg Length/Width/Height: 6.10x1.50x2.00 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Condition: used, Year of construction: 1993, Used Fryma Koruma model VME-120/C stainless steel vacuum process vessel. Ijdpfezvn D Hjx Aiysbb - Manufacturer: Fryma Koruma - Model: VME-120/C Vessel: - Capacity of vessel: 25 - 120 litre - Vessel rated: -1 bar at 150°C - Capacity of jacket: 25 litre - Jacket rated: 3 bar at 150°C Mixers: - scraping-mixing system: speed 17/34 rpm driven by 2.0/2.4 kW motor - homogenizer system with diameter 230 mm: speed 300 - 1450 rpm, driven by 15 kW motor Includes: - vacuum pump - control panel - hydraulic agregate for lifting mixing units

Condition: ready for operation (used), Year of construction: 2014, operating hours: 2,041 h, spindle speed (max.): 2,800 rpm, controller manufacturer: SIEMENS, controller model: SIEMENS 828D, number of axes: 2, This Romi C 510 was manufactured in 2014. It has a hollow spindle with a Ø 65 mm spindle passage, a wedge bar manual chuck Ø 260 mm, and hardened guide surfaces. The tool holder is a Multifix steel holder head B K22. The machine operates at a standard spindle speed range of 56–2800 rpm and has automatic lubrication and cycle functions for efficient operation. If you are looking for a high-quality lathe, consider the Romi C 510 that we have for sale. Contact us for more information. Ijdpfex D I Iuox Aiyobb Additional equipment • Console: Automatic cycle in the longitudinal direction with activation of console recess. Machine Benefits Technical Machine Benefits • Automatic features: tool clamping, hardening of guide surfaces, switching of milling spindle speed, frame cycles, and lubrication of guide surfaces. • Special versions: fully equipped, manual speed control, reduced speed range, manual tightening, numeric indicator for foreign production, and climate-controlled version without a control system. • Guide surfaces: hardened and plated counter surfaces. • Climbing milling: automatic device included. • Automatic tool clamping Extra Information Special Machine Versions: Raised milling headstock, automatic frame cycles, and compliance with foreign standards by agreement.Maschinenbeschreibung:CNC-Horizontal-Drehmaschine - ROMI C 510 V5.0 – SIEMENSStandardausführung:. Siemens-Steuerung 828D sl, mit 10,4” LCD-Farbmonitor. ASA A2-6" Spindelkopf, Drehmoment: max. 303 Nm bzw. ASA A2-8", max. Drehmoment 408Nm, mit 520mm Schwingdurchmesserüber Bett, 450 mm Schwingdurchmesser über Schlittenführung und 255mm Schwingdurchmesser über Planschlitten. Reitstock mit manueller Positionierung des Grundkörpers, mit manueller Betätigung der Pinole (stehende Zentrierspitze) MK-4. Eilgang längs/quer mit 10.000mm/min. Herausziehbarer Spänewanne. Elektroanlage lieferbar für folgende Spannungen/Frequenzen: 400VCA / 50-60Hz. Abgedichtete Arbeitsraumleuchte. ROMI RMMP manuelles Maschinenpaket, bestehend aus CNC gesteuertem Hauptschlitten mit zwei  elektronischen Handrädern für X- und Z-Achse, Joystick-Schaltern und der  bedienerfreundlichen Siemens Software "Manual Machine Plus". Adapterplatte Multifix K22 Type B mit Multifix Stahlhalterkopf B K22. Schleppeinrichtung für Reitstock. Automatische Schmierung mit Inline-Filter und Füllstandsensor. Kühlsystem, komplett mit Kühlmittelbehälter und Kühlmittelpumpe (10l/min,@7bar, 1,5kw/ 2cv). Kühlwasser Spritzpistole mit zusätzlicher Pumpe. Elektrischer Schaltschrank mit Kühlung über Zentrifugalgebläse und Überdruck. Spritzschutz, komplett, Schutztüre mit Sicherheitsfenster und Verriegelung durch elektrische Sicherheitsschalter. Schrauben und Muttern für Nivellierung. Schraubwerkzeugsatz für den Betrieb der Anlage. Vollständige Dokumentation für das ROMI-Produkt auf CD. Standardlackierung: Epoxidlack strukturiert Munsell-Blau 10B-3/4 und Epoxidlack strukturiert grau RAL 7035.

Condition: like new (used), Year of construction: 2008, operating hours: 24,600 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, mold height (min.): 300 mm, overall weight: 6,600 kg, Equipment: documentation/manual, Here, we offer the following well-maintained used injection molding machine as part of our injection molding machine trade: We also purchase well-maintained injection molding machines, starting from the current model year 2010. We have been a wholesaler of used injection molding machines for over 25 years. Due to recent developments - tax information and advantage for the used machine: From July 1, 2025, used machines can also be considered for tax purposes with a special depreciation of 30% annually. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as with a new machine. Keyword: Growth booster, (§ 7 paragraph 2 EStG-E) Manufacturer: KraussMaffei Type: KM 160-750 Control: MC5 Year: 2008 Machine No.: 61011790 Operating Hours: 24,600 h Injection Unit Injection unit/screw: 50 mm Injection volume: 393 ccm Injection weight: 358 g Heating zones: 5 Nozzle stroke: 350 mm Injection pressure: 1892 bar Heating power: 16 kW Clamping Unit Tie bar spacing: 520 x 520 mm Platen size: 820 x 845 (h x v) Clamping force: 160 tons / 1600 kN Opening stroke: 650 mm Maximum platen distance: 950 mm Minimum tool mounting height: 300 mm Ejector stroke: 150 mm Weight: 6,600 kg Pump motor: 22 kW Dimensions: approx. 4.90 m × 1.60 m × 2.10 m Extras -Wedge shoe machine mounting -Hydraulic screw back-rotation lock -Hydraulic screw drive with standard speed -Pneumatic valve 1 on the operator side for blowing function (1 piece 5/2-way valve with 1 solenoid coil). -Control selectable: stroke/time or time/time. Quantity can be manually adjusted via 1 throttle valve at the valve outlet. -Nozzle protection door on the operator side, hinged -Ejector area protection door on the operator side, hinged -Mechanical interface according to EUROMAP 18 for handling device on the non-operator side (with intermediate plate up to and including KM 500) -End position "rear" of the ejector and the tool ejector plate monitored in sequence -Chrome-plated tie bars for the clamping unit and injection unit -Media monitor in the pump room for oil pan monitoring -Enlarged oil cooler for a maximum water supply temperature of 31°C. Ibodsz A Iarspfx Aiyjb -Hydraulic core pull control 1-way on the non-operator side. -Water manifold 8-way -12 temperature control points for tool hot runner. Self-optimizing three-point PID controller with accuracy class 0.5. -Ejection of the cooled nozzle tip -Fan on the control cabinet -Power supply system: TN-C or TN-C-S or TN-S system (three-phase networks with a separately routed neutral conductor or a neutral conductor routed together with the earth conductor) -1 service socket 1-phase 10 A in the control cabinet, connected before the main switch in a country-specific version. -Signal interface according to EUROMAP 67 with fault signal and power supply socket CEE 16 A for handling device. -Event log for continuous recording and retrospective analysis -Quality monitoring package: Process monitoring (cycle actual values and integrals) by specifying tolerance bands, actual value display, actual value storage. Documentation can be printed. -Z-cycle time analysis, cycle storage -Language: German, Greek Visible peripherals are not included in the scope of supply. Free loading ex our warehouse in Hanover - worldwide delivery possible on request. Inspection under power possible by arrangement.

Condition: used, Year of construction: 2011, turning diameter over cross slide: 75 mm, turning diameter: 381 mm, spindle speed (max.): 3,500 rpm, spindle bore: 75 mm, travel distance Z-axis: 850 mm, total height: 2,325 mm, total length: 4,820 mm, total width: 2,100 mm, overall weight: 8,000 kg, CNC Lathe with Y-axis, driven tools and 2nd Spindle CNC Control Fanuc series 18i-TB Turning diameter 381 mm Spindle bore diameter 75 mm Spindle speed 3500 R/min Spindle motor 22/15 Kw Movement X-axis 190 + 69,5 mm Movement Y-axis +55 / -55 mm Movement Z-axis 850 mm Ibsdezv Smfopfx Aiyeb Movement W-axis (subspindle to mainspindle) 830 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper VDI 40 Bar feeder Irco-Breuning ILS MUK Spindle motor driven tools 4000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2017, Arburg 420C 1000-290 e² / Hybrid machine / Production line with Arburg Multilift Select robot Year of manufacture: 03.2017 Injection unit: Screw diameter: 30 mm Shot weight: 97 g Injection pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 20,669 h in automatic operation Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - driven by a servo motor with inverter - energy saving Proportional valve on the injection unit – precise injection Outputs for: closing of the pneumatic nozzle and dosing device Arburg Multilift Select 6kg robot, traverse Year of manufacture: 11.2016 5-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic, Axis B - rotation Iodpfxozy I Dno Aiyjbb Travel ranges in axes: X-400, Y-600, Z-1000 Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 3720 kg Length/Width/Height: 4.30x1.63x2.07 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Isdozy In Tjpfx Aiyjbb Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), functionality: fully functional, Complete sawing frame for EWD Esterer gate, type HDN 600 or HDS 600 with width adjustment. Includes Jansen double-yoke tensioner. Ibedpfx Aiezn Uv Hsysb Lightly used. Ideal for keeping spare parts in stock.

Condition: used, Vötsch Type: NTUD 125/130/125 Pass-through oven Last maintenance: 3.12.25 Temperature control in 3 zones: Control of the internal temperature via an electronic temperature control system, divided into 3 separate temperature zones and controlled by semiconductor switching devices. This ensures good temperature uniformity whether operating in fresh or recirculated air mode. Temperature program control: The CTC control system is operated via a dialog PC with TSI software for the heating control of each temperature zone, as well as the activation of the recirculation fans and damper control. Horizontal airflow with reversal: By switching the electronically or pneumatically actuated dampers, the airflow direction can be set from left to right or right to left. The airflow direction for each of the 3 zones can be independently adjusted. Vertical airflow: By shifting a cover plate in the oven ceiling. Useful floor area: Isdpfxsy H Akrj Aiyebb The floor area can be driven on using customer-provided loading trolleys. Recirculation fans: Each zone is equipped with a radial fan. Usable space dimensions: 1300 mm height / 1250 mm width / 1250 mm depth External dimensions: 2490 mm height / 1770 mm width / 1810 mm depth Volume: 2000 liters Connection rating: 400V(N)PE AC 50/60 Hz 22 kVA Rated current: 32 A Power: 18 kW Nominal temperature: 50 to 150°C Weight: 1000 kg Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: excellent (used), Year of construction: 2015, Arburg 420C 1000-290 e² / Hybrid machine / Production line with Arburg Multilift robot Year of manufacture: 10.2015 Injection unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Ibsdpjzy I Adsfx Aiyob Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 6666 h in automatic mode Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - driven by servo motor with inverter - energy saving Proportional valve on the injection unit – precise injection Outputs for: Closing of the pneumatic nozzle and dosing device Arburg Multilift ML-S robot Year of manufacture: 10.2015 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travel ranges in axes: X-400, Y-600, Z-1000 Robot with adapter, conveyor belt and safety housing Purchase of the robot and conveyor belt available at an additional cost Dimensions: Weight: 3720 kg Length/Width/Height: 4.30x1.63x2.07 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Year of construction: 1995, condition: ready for operation (used), Manual edger DK 90 consisting of: 2 x under-table crosscut saws, line laser, edger, roller conveyor with slat separator, and tilting table. Naturally equipped with all associated control cabinets and hydraulic power unit. Additionally included are numerous templates and a fixed slat head. Inspection is possible upon prior and mandatory appointment. The price is exclusive of 20% VAT, ex works, excluding dismantling, loading, contract preparation, and customs clearance costs. Ijdpfx Ajq U R Eteiyebb

Condition: used, Year of construction: 2008, functionality: fully functional, manual in images. This is a 5 head horizontal Band Saw. It has tilting heads making it ideal for Feather Edge board production. It has 18KW motors. Isdpjzwh Rcefx Aiyebb This machine comes with its own saw sharpening equipment and 10 new blades. All power feed wheels have been replaced with new. It runs on 30mm blades. All new power feed sprockets and fully DC braked.

Condition: excellent (used), functionality: fully functional, Low-profile roller conveyor system. Length 12.20 m. Roller length 1.40 m. Equipped with support rollers and a lifting transfer conveyor with 4 chain strands. Ibsdpfx Aiezumy Rsyeb Incline conveyor belt for side products, to increase the drop height. Left-hand spiral roller conveyor with a counter roller.

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle CNC Control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 / 366 mm Spindle bore diameter 80 mm Spindle speed 4000 R/min Spindle motor 18.5/15 Kw Movement X-axis 260 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1345 mm Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper BMT Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. Ibodpfx Aiozv Sf Ueyob

Condition: excellent (used), Year of construction: 2011, Engel Victory 1350/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Machine Year of Manufacture: 2011 Injection Unit: Screw diameter: 55 mm Shot weight: approx. 590 g Injection pressure: 2183 bar Dosage volume: 618 ccm Clamping Unit: Clamping force: 260 t Tie-bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional Equipment: Production line with Engel Viper 20 Robot Machine in very good technical condition Tie-barless hybrid machine: energy-saving and very quiet 8x air valve on the fixed platen side 2x hydraulic core pull on the fixed platen side 2x hydraulic core pull on the moving platen side 18 hot runner control zones Injection unit is wear-resistant and corrosion-proof Main drive motor – servo motor with inverter – energy-saving Proportional valve on injection unit – precise injection Engel Viper 20 Robot Year of Manufacture: 2011 6-axis robot: 4 axes (X, Y, Z, B - rotation) driven electrically by servo motors; axes A and C – pneumatic Robot safety package Robot with adapter, conveyor belt, and Engel brand safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 19,400 kg Length/Width/Height: 7.06x2.03x2.30 m All offered machines are started and tested by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can attend live technical tests at our facility in Łódź. Ibjdpfezy Itijx Aiyjb Price: On request

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 21534, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 5,000 h, spindle motor power: 15,000 W, number of slots in tool magazine: 38, Equipment: chip conveyor, documentation/manual, Very good condition, used for light milling. High-pressure coolant flushing through the center of the tool, 80 bar. HSK63A tool holder. Blum tool breakage detection. iTNC530 control system. Includes two vices and a pneumatic clamping device ITS100/P WT. Direct sale to end-users only. Ibjdpszw Rl Ajfx Aiyob W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: as good as new (ex-display), Year of construction: 2025, Japa® 505 PRO: Top performance and versatility for the highest demands Advanced splitting technology with Perfect Split In addition to the proven Perfect Cut sawing system, the PRO model features a unique Perfect Split splitting blade, which, in combination with the conventional splitting blade, always ensures consistent and high-quality firewood production. Switching between the splitting methods takes only a few minutes, highlighting the exceptional versatility of this machine. Advanced cleaning with Perfect Clean The Japa® 505 PRO is equipped with the innovative Perfect Clean cleaning system, which efficiently removes sawdust, wood chips, and bark from the final product. This ensures clean and tidy firewood, which not only reduces the cleaning effort required for the machine but also significantly optimizes the workflow. Clean firewood dries faster, burns better, and achieves a higher resale value. Patented hydraulic chain tensioner Thanks to the patented hydraulic chain tensioner, sawing is always smooth and safe. It extends the life of the chain and saw blade and allows for tool-free chain changes in seconds. In addition, a hydraulic feed roller at the beginning of the feed belt facilitates the transport of large logs – for even better ergonomics, safety, and production efficiency. Technical data: Log diameter 500 mm Splitting force 16 tons Splitting wedge 6-way Log length up to 50 cm Oil capacity 100 l PTO speed 500 rpm Motor output S1 15 kW / 400 V Gear oil 80W 90 Conveyor belt length 4400 mm Weight 2330 kg Ibodpfxoxx T Aae Aiysb Original photos & honest descriptions. Shipping by arrangement. Fair prices. Offer price for basic machine, demo model - special equipment extra. ❓If you have any questions, please contact us – we will respond quickly and courteously!