Used Veneer presses for sale (134)

Condition: excellent (used), Functionality: fully functional, overall weight: 10,600 kg, Shelf length 3700mm Shelf width 1300mm Water heating 10 hydraulic cylinders Piston diameter 100mm Clearance between shelves 260mm Weight - 10600kg Maximum pressure 200 BAR Ability to work on 6 or 10 pistons Possibility of dismantling the middle shelf (Clearance 570mm) Bwob Hnowhduzs I D Uel

Condition: ready for operation (used), Year of construction: 1963, Brand: Gustav Josting Model: PFS 2100 Year of manufacture: 1963 Technology data: Cutting length: 2100 mm Extra knife included Transport dimensions: 315x150x160 cm Weight: approx. 2000 kg Bwebomb U A Is Hn I D Uel Stock no: 2001659BXM

Condition: used, Year of construction: 1994, No. 04470 Electro-hydraulic veneer press Joos HP 90 Used, year of construction 1994 Press area 2550 x 1350 LW Gold anodized heating plates, electrically heated Total pressing pressure 90 tons Opening width 400 mm 4 press cylinders each 90 mm diameter Specific pressing pressure with full load 2.75 kg/cm2 Specific pressing pressure with 2 m2 load 4.58 kg/cm2 Operating pressure 355 bar Thickness of the heating plates approx. 51 mm Bwsb Hswhc Awon I D Usl Connected load per plate 9.1 kW Operation with rotary switch Push-button control for opening / closing / stop 2 safety ripcords (all-round) Automatic activation (overrun) of the press cylinders when pressure is released The “Goldeloxal-Decor D.B.G.M.” system makes the surface of the valuable heating plates extremely hard. This results in no scoring, reduced consumption of release agents, shorter working time, no film wear and higher quality veneer work. At the heart of the hydraulic quality press is the hydraulic unit, securely installed in the center of the lower part of the press. This design prevents damage to the motor, pump and other units. The motor, valves and two-stage high-pressure pump are maintenance-free at Joos. With the dynamic piston bearing, the pistons are not bolted to the pressure table but instead rest dynamically on a planed support surface under the pressure table. The table is prevented from tilting and moving by a column guide. A precision rack and pinion parallel guide ensures the synchronization of the printing table. Transport dimensions approx. 2950 x 1560 x 2160 mm LWH Weight approx. 3600 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. Bwsbewd N Rmo Hn I D Uol (We will only respond to inquiries if you provide your address and telephone number!)

Condition: excellent (used), CATALOGUE NUMBER 7552 Technical data: - dimensions of heating plates 2550x1350mm - number of batches 2 - electrically heated shelf - total clearance 400mm - clearance between shelves 280mm and 100mm - number of cylinders 4 - cylinder diameter 90mm - pump motor 1.1kW - total power 31.3kW Bweb Hn Ijvyzkfj D Uel - dimensions length/width/height 3050x1600x2200mm - weight about 3500kg ADVANTAGES - German production - electrically heated shelves - unpainted - very good condition - used press Net price: PLN 28900 Net price: EUR 6790 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: new, Year of construction: 2024, Pressing area: 3000 mm x 1800 mm Design: Freestanding Working area: 1460 mm x 2900 mm Bwsb Hn Iewfcqio D Ujl Number of manual hydraulic cylinders: 4 Pressing pressure per cylinder: 2000 kg Cylinder stroke: 70 mm Pressure clamps: 1 Machine length: 2900 mm Machine width: 900 mm Machine height: 2000 mm

Condition: new, Year of construction: 2025, Functionality: fully functional, overall weight: 3,600 kg, shelf length: 3000mm Beb Hnewfrude I D Uowl shelf width: 1300mm clearance: 400mm 6 hydraulic cylinders Piston diameter 85 mm Machine control from the touch panel Built-in electric oil heating Electric time opening Safety break Year of production 2025 NEW Logic control system Overall dimensions: length: 360 cm width: 160 cm height: 203 cm

Condition: as good as new (ex-display), Year of construction: 2021, total width: 1,618 mm, total length: 1,830 mm, total height: 2,400 mm, overall weight: 5,000 kg, type of input current: three-phase, input current: 81 A, input frequency: 60 Hz, opening width: 100 mm, operating temperature: 140 °C, cylinder diameter: 65 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Manufacturer : JOOS Model: HPS 20 year of production 2021 Total pressure force : 200 kN 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Bwsb Hn I Det Eq E Se Uel Infinitely adjustable temperature. Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Press new - never used Full technical documentation included.

Condition: used, Year of construction: 2003, machine/vehicle number: 92630105, ORMA multi-shelf press Shelf size 2500x1300 mm Bjb Hn I Dswd Rxrj Ujwl Number of shelves 4 pcs Steam heating

Condition: good (used), Joos shelf press shelf length 300cm width 130cm 3 loads clearance between shelves 12cm, max clearance with one load 47cm solid steel shelves water heating Bwjb Hnjwgc Uqo I D Uel piston diameter 90mm, 10 pistons total pressure 156 tons very solid machine weight +- 11,000kg press dimensions 155 x 400cm x height 300cm machine in stock, can be tested, loading included in the price

Condition: ready for operation (used), Hot press Plan size 2500 x 1300 mm Bwob Hjwbwixjn I D Ujl 1 intermediate plan 4 pistons

Condition: new, Year of construction: 2025, Table size: 3500mm x 1500mm Pump performance: -0.85 bar Storage tank: 100l Vacuum pump: Becker Vacuum pump performance: 40 m³/h Bwjb Hemftlyon I D Ujl Noise level: less than 70db Machine length: 3600 mm Machine width: 1650 mm Machine width folded: 850mm Weight: 480kg

Condition: like new (used), Shelf length: 3500 mm Shelf width: 1300 mm Clearance: 350 mm 8 hydraulic cylinders Piston diameter: 75 mm Machine control via touch panel Electric heating Safety rupture device Upper shelf power: 14,400 W Lower shelf power: 14,400 W Year of manufacture: 2011 Weight: 5100 kg Length: 425 cm Width: 160 cm Height: 210 cm Bwsbsv N Hplj Hn I D Uol

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, BURKLE MULTIFOILER Press Model M8 + STOLMAT Spray Booth Wall Machine for covering flat and formed MDF furniture components with thermoplastic foils. Basic machine data: • Electrical connection power: approx. 28 kW (without optional components), • Operating voltage: 400 V, 50 Hz, 3-phase, • Control voltage: 24 VDC, • Required air pressure: min. 6 bar, • Air connection diameter: min. 1 inch, • Required air volume: max. 2880 l/min, • Air consumption during pressing process: ◦ 4 bar forming pressure: approx. 720 l/cycle, ◦ Chamber filled to 50%: approx. 360 l/cycle. Operating side: in the direction of feed, right-hand side. Electrical equipment: • In compliance with DIN/VDE (EN 60204) standards, • Electrical documentation according to VDE, • Paint color: machine and control cabinet RAL 7035 light grey, decorative elements RAL 5002 blue. Working materials: • Material applied: ◦ PVC foils 0.30–1.0 mm, ◦ High gloss foils 0.50–1.0 mm, ◦ PET foils 0.35–0.60 mm. • Material processed: ◦ MDF board (smooth or profiled surface), ◦ Board temperature: approx. +18°C, ◦ Board moisture content: approx. 6–8%, ◦ Board density: approx. 750 kg/m³. Technology: • Thermal forming without membrane, • Working area: 1330 x 2430 mm, • Maximum workpiece size: 1250 x 2350 mm, • Minimum foil width: 1400 mm, • Workpiece thickness: 6–35 mm (depending on part geometry). STOLMAT Spray Booth Wall 1. Purpose of the device: • Wall for extracting paint dust and vapors. • For capturing dust generated during spray application of paints and lacquers onto furniture components. • Designed for use with high-efficiency spraying equipment (spray gun). • Filtration efficiency >96%, eliminating the need to clean exhaust ventilation ducts. • Equipped with side covers ("tapacze") to improve extraction efficiency. 2. Technical data: • Dimensions (LxWxH): 2500 x 2130 x 700 mm, • Fan type: duct fan 500, • Fan capacity: max 7500 m³/h, • Max pressure: 400 Pa, • Fan motor power: 1.85 kW, • Voltage: 230/400 V, • Number of fans: 1 unit, • Filtration surface (1st stage – cardboard filter): 4.80 m², Bjb Hnowfz Nks I D Uowl • Filtration surface (2nd stage – PS fiber filter): 2.50 m², • Dust filtration efficiency: >96%. 3. Technical description: • The spray extraction wall is made of galvanized steel sheet, 1.5 mm thick. • Wall elements are connected by screwing and sealed with acrylic mass. • The fan is mounted on a wall bracket. • Side covers ("tapacze") made of galvanized steel sheet. 4. Dust filtration parameters: • Cardboard filter (labyrinth type): ◦ Class G3 (DIN 53438, EN 779), ◦ Thickness: 60 mm, ◦ Flow rate: 1200–3800 m³/h/m², ◦ Filtration efficiency: 90–98%. • PAINT STOP filter: ◦ Flow rate: 2500–6300 m³/h/m², ◦ Filtration efficiency: 93–97%.

Condition: good (used), Bürkle U 90 6 cylinders 2500/1250 mm Electric plates pressure 90 t Bwob Hnsp Ech Se I D Usl

Condition: excellent (used), OTT shelf press shelf length 330cm width 160cm 3 batches clearance between shelves 13cm, max. clearance with one batch 46cm Bwebjwgb Uis Hn I D Ujl solid steel shelves water heating piston diameter 90mm, 10 pistons safety switch - breakaway pump motor 5.5KW total pressure 210 tons very solid machine weight +- 14,000kg machine in stock, can be tested, very good condition loading included in the price

Condition: excellent (used), Functionality: fully functional, Fully functional OTT model JU90 veneer press Bwebswd Upbs Hn I D Uel Panels: 255x135cm Heating plates 2x 7kW Top condition, new panels

Condition: new, Year of construction: 2025, Table size: 3000mm x 1500mm Pump performance: -0.85 bar Beb Hnsipv Nre I D Uowl Vacuum pump performance: 40 m³/h Vacuum pump: Becker Noise level: less than 70db Storage tank: 100l Machine length: 3100 mm Machine width: 1650 mm Machine width folded: 850mm Weight: 425kg

Condition: excellent (used), Year of construction: 2002, plate length 3500mm plate width 1300mm solid steel plates oil heating with included heater 8 hydraulic pistons pistons diameter 85mm Bobomv E Hfj Hn I D Uowl total pressure 160 tons safety line switch year 2002

Condition: ready for operation (used), Steinemann Veneer Press Press size 2750 x 1350 mm Opening width 600 mm. Please note: The press must be recessed 200 mm into the floor or placed on 200 mm feet. Electric heating plates 16.8 kW Press force 90 tons Specific pressure 3 kg/cm² Cylinders 6 x 80 mm Weight approx. 4800 kg Space required 3700 x 1400 x 2100 plus 200 mm at the bottom Price 6000.- Condition: Ready for use Bwjb Hn Iev Uqrbs D Uel

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: Bjb Hn I Djfh Tmmo Uswl - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: ready for operation (used), plate length 3500mm plate width 1300mm water heating 8 hydraulic pistons pistons diameter 85mm plates span 640mm outomatic opening year 1992 Bebsrdd Smo Hn I D Uewl

Condition: excellent (used), Year of construction: 1992, press area 2500 x 1100 mm press cylinder no. # 4 pressure max. 70 t voltage 3 x 400 V + N, 50 Hz. total electric load 14,7 kW electric heating platen working pressure adjustable via pressure clock central operating panel with all main machine functions temperature display for both platen emergency release cord heavy duty gear rack opening hight programmer Bob Hnsih Svfs I D Uowl microswitches to prevent uneven closing of the platen dimensions approx. L x B x H ca.: 2900 x 1250 x 1900 mm weight approx. ca. 3200 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Hot plate press with medium heating plates Pressing surface 2750 x 1300 mm Number of press cylinders # 6 Total pressing force 100 t Bsb Hevzq Rksn I D Ujwl Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 3.0 kW Space requirement (L x W x H) approx.: 3300 x 1450 x 1950 mm Weight: approx. 3700 kg Hydraulic hot plate press Lower piston design Medium heating plates - for connection to the central hot water supply Pressing pressure continuously adjustable using a pressure switch Central control panel Analog temperature display for hot plates Safety ripcord Rack compensation Main switch Automatic opening Stroke limitation NEW AL cover plates

Condition: excellent (used), Year of construction: 2007, Electric hot plate press ITALPRESSE Model: XL8 S 30-13 Dimensions of the heating plates 3000 x 1300 mm Number of heating plates 2 Number of shelves 1 Shelf opening 600 mm Heating plate design: Electric heating plates - gold anodized version Max. Max. temperature of the heating medium 120 degrees Installed electrical heating capacity approx. 25.0 kW Pressure cylinder: Total pressing force 1200 kN (120 t) Number of cylinders 8 Compact hydraulic unit made by HAWE Pump for closing phase and pressure build-up phase. Automatic pressure reset. Power of the hydraulic unit 3 kW ON/OFF key switch Illuminated push button for emergency reset (RUN) Electronic control unit with input terminal for controlling and monitoring the machine with the following functions: Digital timer for setting the pressing time. Digital input and monitoring of the pressing pressure. Digital diagnosis and display of fault messages. Safety devices: Two-hand release with safety circuit. Safety rip cord around the machine. Machine according to CE-NORM CE conformity declaration. Operating voltage: 400 V - 50 Hz, 3 Ph Bjb Hn Ist Erfaj D Uswl Dimensions L x W x H = 3650 x 2450 x 1730 mm Weight approx. 4500 kg