Used Face Plate 2013/4 for sale (65,828)

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, sheet thickness (max.): 60 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), Equipment: cone bending device, documentation/manual, 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls 570 / 500 / 430 mm Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Pgsdpfxjzbqquj Alwet Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Faceplate (28517) Diameter 400 mm Mounting KK 6 Cone diameter 106.39 mm 4 stud bolts M 12 Psdpfjt R S A Nox Alwsgt Pitch circle diameter 133.4 Weight 80 kg

Condition: used, diameter 400 mm passage / inner diameter 100 mm 4 individually adjustable clamping jaws mounting short taper DIN55022 size 6 taper diameter 106 mm bolt circle of the 4 fixing screws 133.4 mm height approx. 100 mm height of the jaws 58 mm screw size M12 weight approx. 69 kg Pedpovimuusfx Alwogt

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Face plate: chuck size Ø 500 mm -Receptacle: short cone 8 (Ø 136-139 mm) -Hole circle: Ø 172 mm -Through hole: Ø 80 mm -Groove width: 20 mm -Weight: 86 kg Psdpfermt R Rox Alwjgt

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Pgsdpfezu T Smox Alwet Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: good (used), Year of construction: 2013, Machine Summary Compact, proven digital plate imager for label & narrow-web plate facilities. Handles a wide range of materials (digital flexo, chemistry-free films, digital letterpress on film/metal base, and screen) in the popular 24″×20″ (609×508 mm) format. Equipped with EasyClamp for quick, convenient loading onto the vacuum drum. Technical Data (from seller’s dossier) • Model: Esko CDI Spark 2420 — Optics 7.5 • Maximum plate size: 609 × 508 mm (24″ × 20″) • Power supply: 220–240 V, 1/N/PE, 6 A, 50/60 Hz • Machine dimensions (W×D×H): 1160 × 700 × 1050 mm | Weight: ~320 kg • Serial number: 107199 | Year of manufacture: 2013 • Equipment/Features: EasyClamp vacuum drum loading Condition & Viewing • From a company closure; machines were in active use until closure and can be demonstrated in operation by arrangement. Pedpfx Alow Tc Tfewjgt

Condition: excellent (used), Face plate and clamping disk Psdpjtup Trjfx Alwjgt (2858) Diameter 440 mm Camlock mounting 133.4 Cone diameter 106.39 Height of face plate 50 mm Weight 28 kg

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm Pgodozzvyyspfx Alwet 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: excellent (used), Face plate diameter 1000 mm Spindle mount DIN 55027 - size 11 Weight 520 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Pjdpswgk Ilofx Alwjgt

Condition: like new (used), Year of construction: 2020, Technical data: Pgjdpfxoyzc Iao Alwst Working width: 2050 mm Max. bending capacity (mild steel St40): 6.0 mm Max. pre-bending (mild steel St40): 4.0 mm Top roll diameter: 170 mm Side lower roll diameter: 170 mm Central lower roll diameter: 145 mm Cone bending device Hardened rolls Working height: 800 mm Mobile control panel Hydraulic drop-end bearing CE marking Motor power: 2.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very good, almost as-new condition, very little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology and wear are age-appropriate; used machines are sold without any warranty.

Condition: excellent (used), diverse lathe chucks and face plates as shown in the pictures Pedpjfr T N Uofx Alwsgt

Condition: used, Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 560 mm -long jaws Pgodpfx Alodfv Iiswot -Cone: Ø 120 mm -Through hole: Ø 110 mm -Hole circle: Ø 170 mm -Weight: 94 kg

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm Pgjdpfxjzzvz Rj Alwst 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: new, Faceplate diameter: 300 mm Pgsdpfxjxazpwo Alwst Bore: 80 mm Mounting taper, short taper according to DIN 55027: size 6 Faceplate width: 80 mm

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Davi Promau - MCB-3037 MACH-ID 9751 Make: Davi Promau Type: MCB-3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication CE-Declaration Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Podpezi Ra Rjfx Alwsgt Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Pgsdpfx Aoza D U Djlwjt Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two Pgsdpfx Asz Dxpmolwot INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Since 2004, DAVI has revolutionised the way sheet metal rollers are wired (similar to ‘fly-by-wire’ technology in the aerospace, FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified maintenance work more easily More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Permanent lubrication technology The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust - Hardened rollers •Excellent heat tre...

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Pjdpfx Aox Ii Hvjlwjgt Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Diameter: 315 mm Mounting: Cylindrical, 80 mm Through-hole: 80 mm Mounting set: 80 mm Bolt spacing: 4 bolts, ... mm diameter Thickness: 95 mm Pgsdpfsh Rav Njx Alwst Height with bolts and jaws: 180 mm Features: Jaws are rotatable and individually adjustable Condition: good Weight: 37 kg Dimensions: 315 x 315 x 180 mm

Condition: used, functionality: fully functional, Year of construction: 2000, control type: CNC control, roller (bottom) diameter: 210 mm, roller (top) diameter: 205 mm, side roll diameter: 170 mm, roller length: 1,100 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, power: 5.5 kW (7.48 HP), Equipment: cone bending device, emergency stop, hardened rollers, 4 – Roll bending machine Manufacturer: STÖLTING, Type: VB 322 Year of manufacture: 2000 Technical data Manufacturer: STÖLTING Psdpfx Aezgf Rxslwjgt Type: VB 322 Year of manufacture: 2000 Bending length: 1100 mm Sheet thickness: 12 mm Bending allowance: 8 mm Upper roll diameter: 205 mm Lower roll diameter: 210 mm Side roll diameter: 169 mm Main motor: 5.5 kW Weight: approx. 3200 kg Equipment • CNC control • Conical bending device • Operating manual All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: excellent (used), functionality: fully functional, Year of construction: 1993, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 280 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 4,050 mm, working width: 4,000 mm, working height: 1,100 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, overall weight: 11,000 kg, total length: 6,000 mm, total width: 1,450 mm, total height: 1,510 mm, power: 11.03 kW (15.00 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, hardened rollers, 3 roll 4000x8 mm Plate bending machine with pre-pinch Model Famar CPI4/6 CAPACITY plate width 4000 mm plate thickness 8 mm pre-bending 6 mm Psdpfxoxnmb Is Alwjgt --- Useful rollers width 4050 mm Top roll d 300 mm Side rollers D 280 mm hardened surface of the 3 rolls position readout of the bending rollers Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on rollers for profile bending Variable speed rolling up to 5 mtr/min power electric motor 15Hp on hydraulic unit 15Hp-Voltage 380/50 safety installations with emergency stop dimension 6000x1450 x H 1510 weight 11 Ton

Condition: excellent (used), Year of construction: 2013, load capacity: 340 kg, arm reach: 2,800 mm, controller manufacturer: ABB, controller model: IRC5, IRB 7600 is ideal for heavy applications, regardless of industry. Typical uses include handling heavy fixtures and parts, turning car bodies, lifting engines, in foundries or forges, and loading and unloading machine cells. It can also be used to lift large, heavy pallet layers. Characteristics such as high available torque and inertia capability, rigid design, and powerful acceleration have earned this market leader its “Power Robot” title. Year: 2013 (bulk buying discounts available) Condition: Used Cabinet: IRC5 Included Teach Pendant: Included Signalling & Power Cables: Included Pgedpfow Nanrjx Alwet Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.

Condition: used, Large Industrial Plate Heat Exchanger – AISI 316 Stainless Steel Plates Heavy-duty industrial plate heat exchanger equipped with a large plate pack made of AISI 316 stainless steel. Product details: Pgodpfez Di D Iox Alwet Equipment: Plate heat exchanger Plate material: AISI 316 stainless steel Large industrial plate pack Heavy-duty steel frame Flanged process connections Condition: Used industrial surplus Identification/marking: 316 The heat exchanger is dismantled and available from stock in Rotterdam, The Netherlands. Manufacturer, exact model, capacity and other technical specifications are currently unknown. Please refer to the pictures for the configuration and condition. This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for additional information or to make an offer.

Condition: excellent (used), Year of construction: 2006, Technical specifications: Working width: 2100 mm Bending capacity: 28.0 mm Springback: 22.0 mm CNC control Diameter of upper roller: 350 mm Diameter of middle roller: 330 mm Diameter of side rollers: 240 mm Hardened rollers Conical bending unit by inclining the two side rollers Mobile control panel with digital display Motor power: 7.5 kW Pjdpfx Aox Dtt Aslwsgt CE marking Dimensions (length x width x height): approx. 3600 x 1500 x 1500 mm Weight: approx. 14.5 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2023, Stäubli TS2-40 SCARA Industrial Robot Manufacturer: Stäubli Faverges SCA Type: TS2-40 Robot Year of Manufacture: 03/2023 Machine Type: 4-Axis SCARA Industrial Robot Controller: Stäubli CS9-TS2-40 For sale is a used Stäubli TS2-40 SCARA industrial robot with CS9 controller. This compact robot system has been designed for fast and precise pick-and-place, assembly, handling, and automation tasks. The system is suitable, among other applications, for electronics manufacturing, machine assembly, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical Data: Manufacturer: Stäubli Faverges SCA Model: TS2-40 Robot Type: SCARA Robot Number of Axes: 4 Robot Year of Manufacture: 03/2023 Reach: 460 mm Rated Payload: 2.4 kg Maximum Payload: 8.4 kg Z-Stroke: 200 mm XY Repeatability: ±0.01 mm Z Repeatability: ±0.004 mm Rz Repeatability: ±0.002° Mounting Type: Floor Mounting Performance Data: Maximum Speed Axis 1: 550°/s Maximum Speed Axis 2: 720°/s Maximum Speed Axis 3: 2,500 mm/s Maximum Speed Axis 4: 2,500°/s Cycles per Minute: up to 240 Power Consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller Year of Manufacture: 03/2023 Controller Version: Rackable Supply: 1 × 230 V AC / 50–60 Hz Connection Power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Equipment: Stäubli TS2-40 SCARA Robot Stäubli CS9-TS2-40 Robot Controller Original Robot Connection Cable (Robot ↔ Controller) Pneumatic and Electrical Connections in Robot Arm Ethernet Interface PROFINET Interface VAL-3 Programming System End-of-Arm Tooling according to Images Accessories according to Images Pjdpfx Ajzlq E Solwegt Dimensions: Maximum Reach: 460 mm Z-Stroke: 200 mm Dimensions CS9 Controller (H × W × D): approx. 270 × 445 × 365 mm Shipping Data: Robot Weight: approx. 38 kg Controller Weight: approx. 30 kg Total Weight: approx. 68 kg Shipping Dimensions on Pallet (W × D × H): approx. 1,200 × 800 × 700 mm Condition: Used Year of Manufacture: 2023 Optical Condition according to Images. System start-up and information menus have been tested. A teach pendant is not included in the scope of supply. Scope of Supply: Stäubli TS2-40 SCARA Industrial Robot Stäubli CS9-TS2-40 Controller Original Robot Connection Cable (Robot ↔ Controller) End-of-Arm Tooling Accessories according to Images Scope of supply as shown in the images. The table shown in the photos, as well as any other items not expressly mentioned, are not included in the sale. Subject to change, errors and prior sale.