Used Sheet metal deburring machines for sale (17)

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, The DiscMaster SF is equipped with oscillating disc stations from above and below for the simultaneous processing of two workpiece sides in one pass. The disc tools with flexible sanding flaps rotate and oscillate across the workpiece. This means that all internal and external contours are processed uniformly through 360°, regardless of the orientation of the contour. 7Zwe7V2Ug Loewer DiscMaster SF 2/2 - 1500 deburring machine (2020) Manufacturer: Loewer Type: DiscMaster SF 2/2 - 1500 Year of manufacture: 2020 Condition: very good, used max. sanding height : 80 mm max. workpiece width : 1500mm Disc motor - rated power : 4 x 2,2 kW disc motor - speed : 1.000 min-1 feed adjustment motor - rated power : 2 x 0.37 kW Height adjustment motor : 0,75kW Oscillation motor : 4 x 0.75 kW Operating voltage : 400 V Frequency : 50 Hz On-site fuse protection : 40 A Extraction connection dimension : 2 x 180 mm Air requirement : 5,500 m3 / h Minimum air speed at the machine connection : 30 m / s Negative pressure at the extraction connection : 2,750 Pa Operating pressure : 6 - 8 bar Length : 1,950 mm Width : 2,150 mm Height : 2,000 mm Weight: 3,400 kg Options: - Transport table infeed - Transport table outfeed - Sensor strip for even tool wear. Detection of the machine's occupancy and display at the infeed of the preferred loading position. Scope of delivery: - Documentation

Condition: new, The EM pipe and profile deburring machines are the ideal addition to any cold circular saw, shear, notching or profile end processing machine. A sturdy wire brush can be used to remove chips and burrs that have not been completely loosened. The cutting edge itself remains unchanged. Ideal for every workshop with tube processing in trade and industry. T2Kbhgf

Condition: good (used), Year of construction: 1994, machine/vehicle number: 40-2664-94H, Offer 24523 Technical data: 770M2Oaas - Deburring of extruded profiles of any geometry - Mechanical engineering profiles, facade profiles, heat sinks, housings, etc. - Made of aluminum, steel, stainless steel - Already surface-finished anodized or painted workpieces can - also be deburred. - Cross sections 20 x 20 to 120 x 120 mm - Disc speed 1000 / 1500 rpm - Drive 400 V / 1.1 / 1.6 kW - Brush depth adjustment - Working height approx. 1000 mm Space required approx. W 650 x H 1650 x D 1100 mm Weight approx. 100 kg

Year of construction: 2023, Condition: new, Deburring and fine grinding machine with 3 working stations: Sanding belt - Brushing station - Sanding belt 3Uzzsd8E Effective maximum working width: 1150mm Standard workpiece thickness: 0,8 - 150mm digital workpiece thickness display on control panel, accuracy 0,1mm adjustable pressure rollers before and after the work stations Sanding belt insertion on the left Sanding belt centering by electronically controlled photocell, emergency stop in case of skew or belt breakage Infinitely variable feed speed of the carpet incl. options: Preparation of the machine base for forklift loading suction collector in galvanized sheet for machine with 3 working units plus 1 external unit Vacuum device to increase the adhesion of small or slippery workpieces on the feed carpet. With perforated feed table and carpet as well as powerful electric fan and soundproofed outlet according to CE standard, 5,5kW 2x Grit-Set for electronic fine positioning of the contact rollers Adjustment and display (0.01mm) on the control panel, stand-by position with pneumatic reset of the contact roller in case of emergency stop Frequency controlled drive motors for grinding belt cutting speed, motor power per unit 11kW Electronic adjustment of brush unit HMI Vision - PLC control with visualization of the various machine machine settings via color touch screen Storage possibility of up to 250 grinding programs

Condition: like new (used), Year of construction: 2021, operating hours: 229 h, Functionality: fully functional, machine/vehicle number: 2021.10.201, table width: 1,350 mm, Edge processing machine with sanding roller and sanding lamella brushes. Machine is fully functional. Machine equipped with motorized infeed and outfeed conveyor. Very low number of operating hours (229 h). Machine is ideally suited for processing laser-cut and punched sheet metal parts in the thin sheet metal area. Commissioning can be carried out by our own service. Znq38Eetg

Condition: new, Year of construction: 2024, Functionality: fully functional, The grinding and deburring machine offers an efficient solution for processing laser- and plasma-cut parts. These high-quality machines ensure excellent processing by rounding the edges of the parts and removing burrs, resulting in a significantly improved surface quality. Using the latest technology, our machines comply with all relevant CE directives and guarantee the highest safety standards. The user-friendliness combined with a robust design enables smooth integration into your production processes. With our grinding and deburring machine, you not only optimize processing times, but also increase the precision and durability of your products. Benefit from high-quality processing and increase your production efficiency. Udieq7H3Yr

Year of construction: 2008, Condition: excellent (used), For sale is a used laser cutting machine TruLaser 3530. technical data: - Operating hours: Beam-on 2955 h/Laser-on 15464 h. - X-travel 3000 mm (max. 3104) - Y-travel 1500 mm (max. 1580) - Xp travel 300 mm (max. 305 mm) - Z-travel 114 mm - max. material thickness 20 mm - maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2 and Z axes - max. positioning speed axis-parallel 120 m/min. - Simultaneous 170 mm/min. - Acceleration during positioning X-axis 9 m/second - Xp + Y axis 15 m/second - Cutting X-axis 4 m/second - Cutting Xp- u. Y-axis 15 m/sec. Standard equipment Repsl - Closed machine frame with integrated laser resonator - Motion unit for optimum machining speeds - Additional highly dynamic Xp-axis - Automatic pallet changer - Closed beam guidance - NitroLine, high-pressure cutting - FocusLine, constant focus position - Compressed air cutting - PierceLine, reduction of the piercing process - PlasmaLine, plasma sensor technology - SprintLine, fast machining - LensLine - FlyLine - ContourLine, for the production of small holes - Microweld - spraying device - Position laser diode - Programmable cutting gas pressure - Automatic switch-off - Workspace illumination - TruTops Laser lite - CO2 laser TruFlow 3200 with high-frequency excitation, mirror telescope and maintenance-free turbo radial blower - Laser control TASC 3, logbook function and cooling unit - Laser cutting head with 5 and 7.5 lens and quick-change device - ControlLine, capacitive height control and process control - Sinumerik 840D control system: Open control - Causes of error messages via diagnostic functions Extended machine equipment - Pallet changing system - Laser cutting heads 5" and 7.5 - additional laser cutting head with 3,75" lens for high speed cutting - dimensions in mm: approx. 9300 x 4600 x 2000, weight in kg: approx. 11500 year of construction: 2008 Special price 80.000€ net Machine is dismantled. After previous arrangement can be visited. If interested please contact

Condition: new, Stationary bench-type machine for deburring and chamfering of various materials. The directly driven carbide cutter head provides superior work results plus a more precise and better surface quality compared to grinders. Bevel angle and bevel width can be adusted as needed. This model is used predominantly in steel construction and mechanical engineering. Btqs0Jcb

Year of construction: 1993, Condition: excellent (used), Drum diameter inside 540 mm Bddg3G3Okny

Condition: used, Material width: 1000 mm workable material thickness: 1-20 mm min. part length: 150 x 100 mm Required power: 4 x 4,8 kW Rotation speed: 1400 rpm Dqnmet Length: 2220 mm Width: 1500 mm Height: 1500 mm Weight of machine approx.: 1550 kg Standard configuration - Oxide layer removal on inner and outer contours of lasered sheets up to 20 mm sheet thickness- Two-sided processing saves costly turning - no quality problems during further processing - Defuse the razor-sharp laser cutting edges - Improvement of surface quality by removing rust, scale and dirt - Oil film is retained

Year of construction: 2023, Condition: new, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. - Mobile and compact setup - Standard with vacuum system 2.2 kW - Optional with 2 or 4 electromagnets - Equipped with 2 grinding heads - Bracket with double hand control (CE marking) - Workpiece width: max. 780 mm / length unlimited Re2Nd - Power consumption of machine: 400 V, 50 Hz, 10 A, 6 kW - Dimensions: 1435 x 1100 x 1510 mm (L x W x H)

Condition: good (used), Year of construction: 1985, machine/vehicle number: 2.309.044, Offer 23195 Precision - deburring - faceting milling machine / edge milling machine Technical data: Steel - stainless steel - aluminum - plastic ,machining deburring and faceting process is done with milling cutter Bevel angle 45 ° bevel width infinitely variable Iukrpwl9C length of guide bar 500 mm working height 750 mm speed 2750 rpm drive 400 V / 0,7 kW space requirement approx. W 500 x D 400 x H 8500 mm Weight approx. 30 kg

Condition: excellent (used), Product Information "POLY-PTX 800 satin finishing machine" From the inventor of the longitudinal sander. Our multifunctional longitudinal sander with 1750 watts of power, speed control, ergonomic design and versatility - including up to 150 mm working width. High torque and power reserves guarantee professional, continuous use and greater profitability. Features: Infinitely variable speed control from 1000 to 3800 min-1 with a tachogenerator to ensure constant speed even under load. Grinds from coarse to fine. Balanced, simple manual guidance without support rollers. This allows free movement (oscillation effect). Guarantees shadow-free, seamless, highly decorative surfaces in satin, matte and industrial finishes. It satin polishes to a mirror shine and refines the surfaces of stainless steel, steel, non-ferrous metals such as brass, bronze, copper, aluminum, as well as wood. Finest sanding on large surfaces, without shadows or edges. Removes welds, deep scratches, rust, dirt, layers of paint and oxides. Goes from coarse grinding to mirror shine on stainless steel and non-ferrous metals in just three steps. It's also ideal as a round tube grinder using a sanding belt roll. Grinds and polishes open and closed pipe structures. For pipe processing, the "hole system" allows safe and fast bonding of fleece and felt tapes to closed pipe structures. It does not require complex tape bonding. Huge range of grinding tools , which offers a solution for every task. With rubberized handle for optimal handling! Set contents: 1 POLY-PTX® 800 basic unit 1 robust, impact-resistant plastic carrying case 1 QUICK-LOCK cable 4 m 1 POLY-PTX® mounting screw 1 fleece disc 100 mm wide Cpovk8Gv Machine type: Satin finishing machine Cable/battery: Cable Suitable tools: Brushes, bushings, polishing rings, wheels Plug type/power connection: EU (C+F) 220-240 V ~ 50-60 Hz Power consumption: 1750 watts Max tool size: Diameter 115 x width 100 mm Tool holder: 19mm spline shaft WEEE Reg. No.: DE 51395731 Speed in min-1: 1000 - 3800

Condition: ready for operation (used), continuously adjustable facet angle from 30 to 45 to 60° Facet width for workpiece thicknesses of 2.5 mm: 0 - 10 mm Tool diameter: 170 mm Gpfybw Speed: 2800 rpm Drive motor: 380 V, 550 W Space required: 500 x 390 x 370 mm

Condition: new, Immediately available!! Different sizes and machine combinations available! Contact us - we will be happy to advise you! Ideal combination machine for fast deburring and chamfering. Design as free standing machine three-phase motor: 400 V 1,8 kW Speed: 1400 / 2800 rpm Powerful and low-vibration three-phase motor Motor suitable for continuous operation Large bearings guarantee smooth running with low noise level Stable base cabinet on four rubberized feet Info belt grinder: For machining on plane grinding surface and contact roller Belt dimension: 120 x 1500 mm Cutting speed: 10 / 20 m/s grinding table: 120 x 470 mm contact roller: Ø135 mm suction nozzle: Ø80 mm Rubberized, spiral grooved and balanced contact roller made of aluminum Tensioning of the belt via spindle drive Belt run adjustable via guide roller Strip change by swinging off or dismantling the sparking boxes Support table mountable on surface grinding and contact roller Grinding arm steplessly clampable between 0 - 90 Cu8Xanxj3H Spark box adjustable and demountable on surface grinding and contact roller Info Edge milling machine: For deburring sawn components or chamfering visible and welded edges. The cutter head mills on the circumference which prevents the formation of a degree The prism can be positioned axially above the cutter head as required, so that the inserts can be used over their full width The indexable inserts can be rotated - thus all four sides can be completely utilized Chamfer width adjustable by means of handwheel and scale Prism hardened and swiveling Prism runs flush together - no slipping through of flat sheets By using different inserts almost all materials can be machined Cast iron prism bed minimizes vibrations Attention: Mill only in up-cut! Chamfer width: Up to 4.2 mm Chamfer angle: 15 - 45 Cutter head: Ø80 mm Indexable inserts: 10 pieces ISO SPUN 12.03.08 Cutting speed: 6 / 12 m/s Prism: 500 x 80 x 100 mm Scope of delivery: High quality tool set, cable and plug (CEE plug 16 A 5 pole IP 44 red). German operating instructions and CE declaration of conformity Abrasive belt in zircon corundum quality Cutter head equipped with carbide inserts Optionally available: Suction unit built into the base cabinet

Condition: excellent (used), Rolei PEF 500 deburring and bevelling machine, basic model in interated in table (1200 x 788 mm, width x depth) made of aluminum profiles Bshr2Zfhci

Condition: good (used), Year of construction: 1991, machine/vehicle number: ST-B-1661, Offer 24154 Technical data: - Brush diameter 250 mm - Brush width 60 mm - Disc speed 1500 / 3000 rpm Gxca3Ry - Drive 400 V / 1.0 / 1.4 kW - Working height 900 mm - Space requirement approx. W 650 x H 1150 x D 450 mm - Weight approx. 100 kg