Used Feldpausch 250 X 2060 Mm for sale (95,606)

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table T-slot table -Table surface: 400 x 250 mm -Y-axis: 95 mm movable, hand crank with fine adjustment, see photos -T grooves: groove width 16 mm, groove spacing 63 mm -Total dimensions: 455/400/H140 mm -Weight: 40 kg Lrjdpsqddi Aefx An Iop

Condition: excellent (used), functionality: fully functional, working width: 2,060 mm, sheet thickness (max.): 3 mm, back gauge adjustment: motor-driven, Equipment: emergency stop, safety light barrier, Vimercati mechanical guillotine shear. - Cutting width: 2060 mm - Sheet hold-down cylinders: 11 units Ledpfxexdr R Ts An Ijrp - Maximum cutting thickness for steel with Rm 410 MPa: 3 mm - Maximum cutting thickness for steel with Rm 600 MPa: 2 mm - Pneumatic rear sheet support Machine is currently in operation and fully functional. Equipped with motorized back gauge with manual control and display showing cutting dimensions. Machine comes complete with added safety guards and an operation and maintenance manual.

Condition: good (used), Year of construction: 2002, Make: PLEIGER Type: HF 75 / 115 S 30 Control: Siemens Simatic panel Year: 2002 Stroke speed slide step 1 : 4 - 20 M/Min Stroke speed slide step 2 :0,3 - 3 M/Min Rotation chuck step 1 : 300 Rpm and 320 Nm Rotation chuck step 2: 100 Rpm and 1290 Nm Horizontal deep hole honing machine Horizontal tube honing machine Lodpfx Aokvnc Sen Isrp Horizontal cylinder honing machine Horizontal pipe honing machine Fine finishing of cylindrical bores Specifications Metric US Standard Drilling depth 11500 mm Power on spindle 55 kW Speeds / ranges 300 Rpm Dimensions (Estimate) Length 25000 mm Width 2000 mm Height 2000 mm Weight 30000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), total length: 3,500 mm, total width: 1,100 mm, plate height: 250 mm, Manufacturer: ASQUITH Year of manufacture: 1990 Specifications Metric US Standard Length 3500 mm Width 1100 mm Height 250 mm Number of T-slots 6 + 3 T-slot spacing / jump 365 mm T-slot size 48 mm Weight per plate approx. 2900 kg Number of matching pieces 1 Lsdpfewp Hacex An Iorp Dimensions (Estimate) Length 3500 mm Width 1100 mm Height 250 mm Weight 2900 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contract terms are made. We recommend checking all important details.

Condition: new, x-travel: 3000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! advantages No deformations in the cutting area Cutting without heat input Ljdjhqnl Tspfx An Isrp Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum stole Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤ 1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: new, x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape Lrsdpfx Aed Ab Uujn Ijp aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: new, sheet length: 2060sheet thickness: 4messurements (LxWxH): 2700 x 2250 x 1400motor: 7,5weight approx.: 3000Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Lredpfx Anegickro Iop Ball transfer table Easy front access blade gap adjustment Ballscrew mechanism Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards

Condition: new, sheet length: 2060sheet thickness: 3Standard Accessories:NC control Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs. squaring arm with scale 2 pcs. sheet support arms Lredpfx Asgick Sen Iop 1 pcs. sheet support arm (on models 1103, 1303, 1503) Finger protection Cutting line lighting Ballscrew Cut counter Portable foot control with emergency stop button Photocell on the back safety guards

Condition: used, Year of construction: 2000, greates pass round over bed 520 mm swing diameter over bed slide 480 mm turning length 3000 mm control 840 D SIEMENS number of tools 12 Driven tools - quantity 6 spindle bore 103 mm c-axis ja 0 Scope of delivery of the basic machine: Lrsdjwp S Sqjpfx An Ijp SINUMERIK 840 D 3 controlled axes Rotation Ø over bed 520 mm Turning Ø over bed slide 480 mm Tool carrier with 12 cylindrical shank holders Ø 50 mm 1-stage AC main drive, 53 kW, 50 % ED Speed range 30 - 3000 min-¹ Main spindle head size 8 Clamping door for clamping devices chip conveyor THREE-DIMENSION 3000 mm 12 cylindrical shank holders DIN 69880-50x78 of which 6 positions can be equipped with driven tools, Power 6 kW at 60 % ED, speed range 20-2500 min-¹ 2 gear stages C-AXLE Speed range 0-20 min-¹ Max. Angle specification 9999.999° Working range according to work area diagram POWER CHUCK 3 NHF 315-82 A8 FABR. FORKARDT with centrifugal force compensation, Outer Ø 315 mm, bore Ø 82 mm, with hard top jaws, ground, rod material Ø max. 63 mm including draw tube and attachment

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation Lrodpfx Aoxak D Ren Ijp - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system

Condition: new, Bernardo Motorized Sheet Metal Shear MTA 2060 x 3 mm NCC Cutting length 2060 mm Max. sheet thickness * 3 mm Cutting angle 1° 30’ Strokes/min 31 Working height 810 mm Rear stop 0 – 750 mm Table width 390 mm Motor power 4.0 kW Width 2600 mm Depth 2100 mm Height 1260 mm Weight approx. 1710 kg * Material strength 400 N/mm² Features Equipped as standard with a sheet metal holding device, ideal for thin sheets Support arms on the front for easy processing of large sheets Motorized rear stop, precise adjustment via ball screws Clearly designed control panel with integrated control Robust steel sheet metal construction for vibration-free operation Support table with a right-angled stop on both sides High operator safety thanks to a protective cover and photocells on the rear of the machine 2-blade cutting knives made of high-quality steel guarantee clean and burr-free cutting Automatically acting clamping device for fixing the sheet Scope of supply Cutting line illumination Motorized NC rear stop Front sheet supports Side stops Lrsdped Hxnhjfx An Iop Protective plate with photocells NC control BRL 401.2 Pneumatic sheet metal holding device Foot pedal with emergency stop Knives made of tool steel

Condition: used, Multiplex boards used Lodpsl Uvxnsfx An Isrp length 1680 mm width 1250 mm board thickness 45 mm weight 68,5 kg in the pallets there are 9 holes with diameter 12 mm several presentseveral present

Condition: good (used), The delivery includes: 1x shelf connector, used (for lateral attachment to the shelf upright) Manufacturer: Jung Heinrich Type: Esmena Material color: mill galvanized Lredpfji Enx Tjx An Ijp for shelf spacing: approx. 250 mm L-profile: 85 x 40 mm Weight: 0.68 kg | per piece

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 Lrodpfx Ansya Iaqe Iep - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: good (used), Cast iron marble plate Length: 3500 mm Width: 2500 mm Thickness: 300 mm Ljdpszmw Hrsfx An Ijrp Height on feet: 900 mm Delivered with 12 leveling feet Weight : 6,3 T

Condition: used, Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Lodjzmwqkopfx An Ierp Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roll width: 650 mm -Conveying length: 2250 mm Ledpfob Rud Rsx An Ijrp -Diameter roller: 80 mm -Center distance: 150 mm -Height: 330 mm -driven: via chain -Geared motor: 0.37 kW -Speed: 6.5 m/min -Dimensions: 2250/870/H330 mm -Weight: 210 kg

Condition: used, Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with removal conveyor, transfer station -Manufacturer: Grenzebach, transfer station roller conveyor type WRS -Drive: SEW-Eurodrive 0.18 kW 1380/88 rpm / 0.18 kW 71 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roll spacing: 250 mm -Rollers: rubberized -Lifting: pneumatic -Belt conveyor length: 1400 mm / belt spacing 2x 480 mm -Number: 1x transfer station available -Transport dimensions: 1740/1550/H680 mm Lodpfx Anotrhmqs Ijrp -Weight: 410 kg

Year of construction: 2009, condition: used, Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with removal conveyor, transfer station -Manufacturer: Grenzebach, transfer station roller conveyor type WRS -Drive: SEW-Eurodrive 0.18 kW 1380/88 rpm / 0.18 kW 71 rpm -Intermediate dimension: 1500 mm Ljdstrhncepfx An Ijrp -Conveyor length: 1250 mm -Axle distance: 250 mm -Roller spacing: 250 mm -Rollers: rubberized -Lifting: pneumatic -Belt conveyor length: 1400 mm / belt spacing 2x 480 mm -Number: 3x transfer station available -Price per piece -Transport dimensions: 1700/1500/H1040 mm -Weight: 412 kg

Condition: used, Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø130 x 110 mm -Item no.: 841 703 65 -Heating power: 1600 W -Voltage: 220V Ledpfx Aolu N E Nsn Isrp -Dimensions: 190/160/H110 mm -Weight: 1.3 kg

Year of construction: 2009, condition: used, roller conveyor, roller track, driven roller conveyor, roller conveyor -Manufacturer: Grenzebach, roller conveyor type RFS stable design -Drive motor: 0.18 kW 76 rpm -Intermediate dimension: 1000 mm -Conveyor length: 1250 mm Lrjdpfetlzduex An Ijp -Axle distance: 250 mm -Roll spacing: 250 mm -Rollers: rubberized -Delivery height: adjustable -Number: 1x roller conveyor available -Dimensions: 1480/1150/H720 mm -Weight: 200kg

Year of construction: 2009, condition: used, roller conveyor, roller track, driven roller conveyor, roller conveyor -Manufacturer: Grenzebach, roller conveyor type RFS stable design -Drive motor: 0.18 kW 76 rpm Lodpfx Ajtlzgaen Ijrp -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roll spacing: 250 mm -Rollers: rubberized -Delivery height: adjustable -Number: 1x roller conveyor available -Dimensions: 1440/1700/H960 mm -Weight: 265 kg

Condition: used, energy chain, cable drag chain, energy guiding chain, cable chain, drag chain -Manufacturer: IGUS, energy chain cable drag chain 2 pieces -Length: 4250 mm -Width: 240 mm -Bending radius: 160 mm -Accessories: incl. clamps see photos Lsdpfxeuxg Rle An Isrp -Transport dimensions: 920/890/H480 mm -Weight: 43 kg

Year of construction: 2009, condition: used, roller conveyor, roller track, driven roller conveyor, roller conveyor -Manufacturer: Grenzebach, roller conveyor type RFS stable design Lsdpfx Aotlzfcon Isrp -Drive motor: 0.18 kW 76 rpm -Intermediate dimension: 1000 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roll spacing: 250 mm -Rollers: rubberized -Delivery height: adjustable -Number: 9x roller conveyor available -Price per piece -Dimensions: 1480/1190/H680 mm -Weight: 200kg/pc.

Condition: used, Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with discharge conveyor, transfer station Lrsdpfjtlzgwjx An Isp -Manufacturer: Grenzebach, transfer station roller conveyor type WRSZP -Drive motor: 0.18 kW 88 rpm -Intermediate dimension: 1480 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roller spacing: 250 mm -Rollers: rubberized -Lifting: pneumatic -Belt conveyor length: 1400 mm / belt spacing 500 mm -Number: 2x Transfer station conveyor available -Price per piece -Transport dimensions: 1750/1570/H2020 mm -Weight: 496 kg/pc.