Used Filter Test Mystem for sale (16,608)

Year of construction: 2018, condition: like new (used), functionality: fully functional, TECHNICAL DETAILS Load cell: 2 pcs Xforce K Testing software: testControl II & testXpert III Load cell: Xforce K Measuring amplifier: DCSC module Documentation: available FURTHER TECHNICAL DETAILS - as per documentation, no guarantee Maximum test force Fmax: 50 kN Total height of the testing chamber: 1,534 mm Height of the lower testing chamber without attachments: 1,355 mm Height of the upper testing chamber without attachments: 1,369 mm An additional crossbeam is required for the upper testing chamber. Testing chamber width: 440 mm Load frame Load frame height without uprights: 1,714 mm Load frame height with uprights: 1,829–2,694 mm Load frame width without uprights: 760 mm Load frame width with uprights: 936 mm Load frame width with uprights and machine electronics: 1,124 mm Load frame depth: 140 mm Load frame depth without uprights and with drive base: 507 mm Load frame depth with uprights: 762 mm Load frame depth with uprights and machine electronics: 765 mm Weight and footprint Weight with machine electronics, uprights and typical attachments: approx. 300 kg Net footprint: 0.01 m² Load frame footprint: 0.713 m² Average sound pressure level at maximum speed at a distance of 1 m from the front of the machine: 61 dB(A) Drive Crossbeam speed: min. 0.0005 mm/min to max. 600 mm/min Crossbeam return speed: max. 1,000 mm/min Deviation from the set drive speed: max. 0.05% of the actual value Drive path resolution: 0.317891 nm Positioning repeatability without direction reversal: ±2.0 µm Adaptive control Cycle time: 1,000 Hz Power input Power connection plug CEE 7 (Schuko) Power connection: 230 V, 1 Ph/N/PE Power consumption at full load: approx. 2.3 kVA Bedpfx Aezpw Hdeigelk Mains frequency: 50/60 Hz Mains-side protection of the power connection cable: 16 A Safety functions The drive is equipped with a mechanical holding brake. When switching off, when the emergency stop is activated, or in the event of a power failure, the material testing machine stops at the current position. Unintended unloading due to energy stored in the specimen is prevented.

Condition: new, Year of construction: 2026, -Smart Safety Clean Air Enhanced Efficiency. -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Bsdpjvg U Dxefx Aigelk Effectively minimizes hazardous particles and ignition sources right at the source. -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment. Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety...

Condition: like new (used), overall weight: 40 kg, number of drawers: 15, clamping range: 22 mm, Equipment: documentation/manual, قوالب مصنع فاين صناعه المانيه Blodpfx Aiozp Sniogok

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers Bedpfozhub Asx Aigelk - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: new, Oil mist filters Donaldson DMC-MMB, 7 units available / Oil mist filter Absolent A.mist10 Blsdoy H Exfopfx Aigjk

Year of construction: 2008, condition: excellent (used), Robot cell for leak testing consisting of: Bjdpfx Aijn D D E Tsgelk Robot FANUC LR Mate 200iC/5L - 2008, Table for measurements, equipped with 8 light curtains, 2 pieces of Innomatec equipment for leak testing, type LTC - 502. The cell has a safety system and CE

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch Blodpfxjx T Ah Ds Aigek - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Condition: good (used), Year of construction: 2014, Welding fume filters, welding fume extraction systems, soldering fume extraction systems, small dust collectors -Manufacturer: TEKA, mobile welding fume extraction system type Strongmaster IFA -Drive: 1.1 kW -Volume flow rate: 3000 m³/h -Extraction arm: Ø 160 mm x 4000 mm -Transport dimensions: 950/670/H1365 mm -Weight: 196 kg Bedpfxozblywj Aigolk

Condition: good (used), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter Bedpfxjd Swrdj Aigelk -Manufacturer: Mann & Hummel, Mann-Piclon air filter housing -Part Number: 45 160 92 901 -Inlet/Outlet: Ø 65/61 mm -Quantity: 46 combination air filters available -Price: per piece -Dimensions: Ø 225/305 mm -Weight: 2.35 kg

Year of construction: 2015, condition: good (used), Output: 1200m3/h Bljdperlm Ebofx Aigek motor: 2.2 kW

Condition: good (used), Motor: 2.2 kW Extraction capacity: 1800 m3/h Bledpfxsq U Rbqo Aigok

Condition: excellent (used), INNOWEP ABREX Hand Abrasion Testing Device Manufacturer: INNOWEP GmbH Type: ABREX Machine Type: Hand Abrasion Testing Device / Abrasion Testing Machine For sale is a used INNOWEP ABREX hand abrasion testing device for material and surface testing. The testing device was developed to simulate hand abrasion and to test the mechanical and chemical resistance of surfaces and materials. It is particularly suitable for testing laboratories, quality assurance, and research and development. Technical Data: Manufacturer: INNOWEP GmbH Type: ABREX Device Type: Hand Abrasion Testing Device / Abrasion Testing Machine Year of Manufacture: 12/2001 Bodozrfk Aepfx Aigslk Power Connection: 230 V Power Consumption: 0.5 kW Operation: Touch Panel CE marking present Dimensions: Dimensions (L × W × H): approx. 1,300 × 600 × 800 mm Weight: approx. 50 kg Equipment: Touch operating panel Pneumatic testing system FESTO pneumatic components Test fixture Various clamping and holding elements 2 transport cases with accessories Additional accessories as shown in the pictures Areas of Application: Material testing Surface testing Abrasion testing Hand abrasion simulation Quality assurance Research and development Testing laboratory Scope of Supply: INNOWEP ABREX hand abrasion testing device 2 transport cases with accessories Clamping and holding elements Additional accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Functional scope as shown in the pictures. Nameplate present. Availability: by arrangement. Scope of supply as shown in the pictures. The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Subject to change, errors and prior sale.

Condition: used, Year of construction: 2018, Nominal flow rate: 5087 m³/h Negative pressure Pa: 2300 Motor: 7.5 kW Dimensions: 1080 x 820 x 860 mm Weight: 154 kg Bledpfx Aiovxk Anogek Storage location: Nattheim

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Bjdpfxezimgts Aigolk Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: excellent (used), Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 Material Testing Machine, 20 kN Manufacturer: Zwick / Roell Series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Machine Type: Servo-electric Material Testing Machine / Universal Testing Machine Max. Testing Force: 20 kN For sale is a used Zwick / Roell Z020 Allround-Line material testing machine with testControl II control system, industrial PC, and installed testXpert V3.5 software. The machine is suitable for tensile and compression tests on metals, plastics, elastomers, composite materials, and numerous other materials, and is used in testing laboratories, quality assurance, research and development, and training. Technical Data: Manufacturer: Zwick / Roell Series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Max. Testing Force: 20 kN Testing Direction: Tensile and Compression Testing Space Height: 1,000 mm Crosshead Speed: 0.0005–1,000 mm/min Power Supply: 230 V / 50–60 Hz Power Consumption: 8 A Control System: testControl II Software: testXpert V3.5 Load Cell: Zwick / Roell Xforce P 20 kN Zwick / Roell Xforce P 2.5 kN Dimensions: Machine Dimensions (W × D × H): approx. 1,244 × 690 × 1,324 mm Machine Weight: approx. 212 kg Equipment: testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Testing fixture Connection and cabling Accessories as shown in the pictures Shipping Data: Bljdpfxszra Rqe Aigsk Dimensions (W × D × H): approx. 1,244 × 690 × 1,324 mm Shipping Weight: approx. 212 kg Condition: Used Optical condition as shown in the pictures. Functional scope as shown in the pictures. Nameplates present. Scope of Supply: Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Testing fixture Connection and cabling Further accessories as shown in the pictures The table, monitor, keyboard, and mouse shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Year of construction: 2025, condition: like new (used), Almost NEW Compact filtering unit mod. FC320 for sale! ADVANTAGES: 1. Negative pressure 2. Fire extinguishing system by powder 3. Rotary valve 4. Pulse air sleeves cleaning 5. Extra low noise 6. Waste extraction to big bags. The filtering unit mod. FC320 is studied and realized for an efficient filtration in less space. Its compact and thin line makes it suitable to be placed in every area, also inside productive areas. Thanks to an accurate design it is reliable, silent and easy to use. EXTRACTION AND FILTERING GROUP 1. Nr.1 filtering unit mod. F320 built in galvanized steel sheet, with dimensions 3500 x 1100 x (h) 4300 mm, running in negative pressure and equipped with nr. 60 antistatic polyester filtering bags with dimensions Ø125 x (h) 1300 (filtring area= 60 m2, grammage= 500 g/m2), with cleaning system by countercurrent compressed-air blasts (ON-LINE). The filter is complete with: · Nr.1 tangential inlet to avoid the direct contact of the waste with the filtering bags, making the filter last longer; Nr. 1 motorized screw conveyor, equipped with a proper motor gearbox, for the discharge of the filtered material towards the opening in the lower hopper; · Nr. 1 kit for Big-Bag installed under the hopper, complete with rotary valve and level probe for the control of the filling level of the bag; · Nr.1 high-performance fan, designed to run with clear air, equipped with a premium branded Class S1, IP55 code electric motor with a power 7,5 kW; · Control panel for the management of the fan and the cleaning system; Model FC320 Dimensions[mm] 3500 x 1100 x (h) 4300 Installed power [kW] 7,5 - 400v/50Hz Exhaustion system Into a big-bag Filtering bags dimensions[mm] Ø 125 x (h) 1300 Blsdpfx Aozi Uqmeigek Filtering material Antistatic polyester Number of bags 60 Grammage [g/m2] 500 Filtering surface [m2] 60 Sleeves cleaning system Automatic cleaning system with compressed air Air Flow 6000m3/h 1. Instruction and maintenance manual of the filtering unit; 2. Filtering unit conformity declarations with CE marking; 3. Nr.1 automatic fire protection system, composed of: • Nr.1 powder extinguisher; • Diffusing tube with nozzles; • Polymeric tube for fire detection (to be filled with 18 bars nitrogen); • Alarm pressure switch;

Condition: excellent (used), DAGE Series 4000 PXY – Bond Tester / Shear & Pull Tester for Connection Strength Testing Blodpfx Aiezma Skegok

Condition: excellent (used), For sale is a Karl Süss HR 100 Analyse – a high-end, manual measurement and testing station designed for the analysis and contacting of semiconductor wafers and microelectronic components. The device is used in laboratories, research and development departments, and during scientific research. The station is equipped with a precise measurement table with fine adjustment, a sample holder with a vacuum function, and a mechanical lifting mechanism. It also has connections for compressed air and vacuum, which ensures stable mounting of the components being tested during measurements. Technical data: Manufacturer: Karl Süss Model: HR 100 Analyse Device type: manual testing station (Wafer Probe Station) Application: analysis and testing of semiconductor wafers and microelectronic components Vacuum function for sample mounting Precise measurement table Connections for compressed air and vacuum Blodpfszl H Ayjx Aigsk Condition: used, as shown in the pictures.

Condition: excellent (used), Weiss Technik SaltEvent Type: SaltEvent SC/UKWT 1500 Year of manufacture: 2022 Recirculating corrosion cyclic test unit / salt spray test unit For sale is a high-quality Weiss Technik SaltEvent SC/UKWT 1500 for corrosion, salt spray, condensation, and climate change testing. The unit is suitable for use in industry, research, development, and quality assurance. Technical data: Manufacturer: Weiss Technik GmbH Type: SaltEvent SC/UKWT 1500, with ring rinsing line Year of manufacture: 2022 Test chamber volume: approx. 1450 liters Temperature / climate data: Temperature range, climate testing: +23°C to +70°C Humidity range: 20% to 98% relative humidity Dew point range: +12°C to +69°C Salt spray test: ambient temperature +5 K to +50°C Condensation test: ambient temperature +5 K to +42°C Electrical data: Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: 9.8 kW Rated current: 18 A Refrigerant according to nameplate: R134a – 1.30 kg – GWP 1430 CO2 equivalent: 1.86 t ND max.: 17 bar g HD max.: 25 bar g Media connections: Compressed air / GN2: max. 12 bar Demineralized water: min. 3 bar / max. 5 bar Water connection for ring rinsing line: max. 6 bar Condensate drain available Exhaust connection available Mains connection: 3/N/PE 400 V / 50 Hz Dimensions according to drawing: External dimensions approx.: 3710 x 1537 x 1769 mm Test chamber length approx.: 2365 mm Insertion height approx.: 850 mm Weight according to nameplate: approx. 710 kg Equipment / features: S!MPAC / Webseason touch control panel Ethernet / network connection USB interface Salt spraying Condensation test Dry climate Climate / humidity operation Ring rinsing line Reservoir Insertion rods / Rod inserts Control cabinet integrated Exhaust connection Compressed air connection Bjdsy Hkg Iepfx Aigolk Connection for demineralized water Water connection for ring rinsing line Condition Used Optical condition according to the pictures Normal storage and usage marks present Scope of delivery: Weiss Technik SaltEvent SC/UKWT 1500 Scope of delivery as shown in the pictures Inspection possible by arrangement. Loading can be arranged. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2018, condition: excellent (used), Weiss Technik SaltEvent SC/UKWT 1000 Salt Spray Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000, with annular spray air Year of manufacture: 2018 Machine type: Salt spray chamber / Climate change testing system Test chamber volume: 1,028 liters For sale is a used Weiss Technik SaltEvent SC/UKWT 1000 salt spray chamber with integrated climate change technology, touch control, and annular spray air system. The system was developed for professional corrosion, salt spray, condensation water, temperature, and climate change testing. It is ideally suited for testing laboratories, the automotive industry, material testing, research, and quality assurance. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000 Year of manufacture: 2018 Test chamber volume: 1,028 liters Internal dimensions (W × D × H): 1,560 × 645 × 720 mm External dimensions (W × D × H): 2,925 × 980 × 1,370 mm Transport dimensions (W × D × H): 2,925 × 1,880 × 1,370 mm Weight: 650 kg Power connection: 3/N/PE AC 400 V (-10 % / +10 %) 50 Hz Electrical connection: 3P+N+PE 400 Vac 32 A Rated power: 9.4 kW Rated current: 19 A Refrigerant: R134a Refrigerant quantity: 1.30 kg GWP: 1,430 CO₂ equivalent: 1.86 t Max. low pressure: 17 bar(g) Max. high pressure: 25 bar(g) Air-cooled design Ethernet interface Test ranges: Salt spray test: Ambient temperature +5 °C to +50 °C Condensation water test: Ambient temperature +5 °C to +42 °C Climate test: +23 °C to +70 °C Drying / Ventilation: Ambient temperature +5 °C to +70 °C Humidity range climate test: 20 to 98 % r. F. Humidity range drying / ventilation: < 30 % r. F. Dew point range: +12 °C to +69 °C Consumption data: Water consumption salt spray test: approx. 0.4 l/h Water consumption condensation water test: approx. 34 l Consumption of spray solution: approx. 0.9 l/h Compressed air consumption salt spray test: approx. 1.4 m³/h Compressed air consumption ventilation: approx. 7.0 m³/h Temperature stability: ±1.0 K Bodpfozqab Tex Aigjlk Equipment: Touchscreen control Annular spray air system Climate change test function according to VDA 621-415 Salt spray test Condensation water test Temperature test Climate test Drying and ventilation function Air-cooled cooling system Ethernet interface Automatic test programs Transport data: Dimensions (W × D × H): approx. 2,925 × 980 × 1,370 mm Transport dimensions (W × D × H): approx. 2,925 × 1,880 × 1,370 mm Weight: approx. 650 kg Condition: Used Optical condition as shown in the pictures. Scope of delivery: Weiss Technik SaltEvent SC/UKWT 1000 Integrated touch control Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Year of construction: 2019, condition: excellent (used), Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber (Special Edition)!! Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Machine Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Test Chamber Volume: approx. 340 liters Description For sale is a used Vötsch ClimeEvent C/340/70/5/S temperature and climate testing chamber from 2019. This unit is a rare special edition with three side-pull-out telescopic test drawers. The test specimens can be conveniently prepared and connected outside the test chamber and then inserted into the test chamber. This makes the system particularly suitable for series testing, development tasks, long-term tests, and applications with frequent sample changes. Each test drawer features a stainless steel grid basket and a separately lockable front with its own test specimen port. The three separate test levels allow for a clear arrangement of several test specimens or assemblies within a single test chamber. The system is equipped, among other things, with WEBSeason Touch control, temperature and humidity control, Donaldson compressed air treatment, and extensive documentation. The system is suitable for: Temperature tests Climate tests Environmental simulation Material testing Electronics testing Component testing Battery testing Sensor testing Quality assurance Research and development Aging and stress tests Technical Data Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Test Chamber Volume: approx. 340 liters Temperature Range: approx. -70 °C to +180 °C Temperature Change Rate: approx. 5 K/min Max. Heat Compensation: approx. 3,000 W Temperature Deviation (time-dependent): ±0.1 to ±0.5 K Temperature Homogeneity (spatial): ±0.5 to ±1 K Temperature Gradient: ≤2 K Power Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated Power: 9 kW Rated Current: 20 A Refrigerant 1: R449A – 2.50 kg Refrigerant 2: R23 – 0.75 kg Max. Low Pressure: 21 bar(g) Max. High Pressure: 25 bar(g) Stand Pressure R23: 13 bar(g) Dimensions External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Test Chamber Dimensions (H x W x D): approx. 750 x 580 x 765 mm Weight: approx. 650 kg Equipment WEBSeason Touch Panel Temperature and Humidity Control Stainless Steel Interior Large Observation Window 3 side-pull-out telescopic test drawers 3 stainless steel grid baskets Separately lockable drawers Heated drawer ports Test specimen ports Donaldson Ultrafilter for compressed air treatment Shipping Information External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Weight: approx. 650 kg Blodpszp Nv Dsfx Aigsk Condition Used The unit has been workshop-tested and subjected to a documented test run. The optical condition corresponds to the images. Scope of Supply Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber 3 telescopic test drawers 3 stainless steel grid baskets Donaldson Ultrafilter Accessories according to images Shipping or forwarding possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Year of construction: 2018, condition: excellent (used), VÖTSCH ClimeEvent C/340/70/5/S Climate Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2018 Machine Type: Climate Test Chamber / Temperature and Humidity Test Chamber Test Chamber Volume: approx. 340 liters For sale is a used VÖTSCH ClimeEvent C/340/70/5/S climate and temperature test chamber with three side-mounted, telescopically extendable test drawers. The test chamber was developed for professional temperature, climate, humidity, aging, and stress tests and is ideal for testing laboratories, the automotive and electronics industries, research institutions, and quality assurance. Technical data: Model: ClimeEvent C/340/70/5/S Test chamber volume: approx. 340 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: approx. 5 K/min Power supply: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A Refrigerant: R449A Refrigerant quantity R449A: 2.50 kg Additional refrigerant: R23 Refrigerant quantity R23: 0.75 kg Max. low pressure: 21 bar g Max. high pressure: 25 bar g Static pressure R23: 13 bar g Test drawers: 3 telescopically extendable test drawers Stainless steel grid baskets for holding test specimens Separately lockable, insulated drawer fronts Heated drawer openings Individual test levels accessible separately Suitable for holding several small components and assemblies Dimensions: External dimensions (H × W × D): approx. 1,800 × 895 × 1,810 mm Test chamber dimensions (H × W × D): approx. 750 × 580 × 765 mm Weight: approx. 650 kg Equipment: WEBSeason touch operating panel Digital measurement and control system Temperature and humidity control 3 telescopic test drawers Stainless steel grid inserts Observation window Side cable and test specimen openings Donaldson Ultrafilter compressed air treatment S!MPATI software license Calibration certificate Quality test certificate EU declaration of conformity Documentation / operating manual Accessories as shown in the pictures Application areas: Temperature testing Climate testing Humidity testing Environmental simulation Bodpfozp Inrsx Aigjlk Material testing Electronics and component testing Aging and stress testing Automotive industry Research and development Quality assurance Transport data: Transport dimensions (H × W × D): approx. 1,800 × 895 × 1,810 mm Electrical connection: 400 V / 50 Hz / 20 A Weight: approx. 650 kg Condition: Used Optical condition as shown in the pictures. Scope of delivery: VÖTSCH ClimeEvent C/340/70/5/S climate test chamber 3 telescopic test drawers with grid inserts Donaldson Ultrafilter S!MPATI software documents Calibration and quality documentation Operating manual / technical documentation Accessories as shown in the pictures Shipping or freight shipping possible. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Shaker Fixture Cube / Clamping Cube made of Aluminum Manufacturer: Unknown Type: Shaker Fixture Cube / Fixture Block / Clamping Cube Material: Aluminum Machine Type: Clamping cube for vibration test benches / vibration testing External dimensions: approx. 240 × 240 × 240 mm For sale is a used Shaker Fixture Cube made of aluminum. The clamping cube was developed for use on electrodynamic vibration test benches and serves for the secure fastening of test specimens, measuring setups, and special devices. Due to the precision-machined clamping surfaces and the numerous threaded holes on all sides, the fixture cube is ideally suited for testing laboratories, research institutions, mechanical engineering, the automotive industry, and aerospace technology. Technical data: Manufacturer: Unknown Material: Aluminum Design: Shaker Fixture Cube / Clamping Cube / Fixture Block External dimensions: approx. 240 × 240 × 240 mm 4 mounting holes: Ø approx. 80 mm Central through hole Precision-machined clamping surfaces Threaded holes on all side surfaces Heavy-duty industrial design Dimensions: External dimensions (W × D × H): approx. 240 × 240 × 240 mm Material: Aluminum Features: Precision-machined clamping surfaces Threaded holes on all side surfaces Four large mounting holes Central through hole Heavy-duty aluminum construction High stiffness for dynamic loads Suitable for individual test setups Application areas: Vibration test benches Vibration testing Environmental testing Bledpszp E Dksfx Aigsk Testing laboratories Research and development Mechanical engineering Automotive industry Aerospace technology Shipping data: Dimensions (W × D × H): approx. 240 × 240 × 240 mm Shipping via parcel service possible by arrangement. Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Scope of delivery: Shaker Fixture Cube made of aluminum Scope of delivery as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Universal Shaker accessory kit / adapter plates / expander plates Professional accessory kit for electrodynamic shakers and vibration test benches For sale is a comprehensive used accessory kit for electrodynamic shakers or vibration test benches. The kit consists of several solid aluminum adapter plates, a reinforced expander plate, and additional adapter and clamping components for professional use in vibration and shock testing. These components are ideally suited for test specimen mounting, special fixtures, and custom adapter designs in the field of material testing, environmental simulation, and research and development. Technical data Manufacturer: unknown Type: Accessory kit for electrodynamic shakers / vibration test benches Material: predominantly aluminum, partially steel Components • 1 expander plate, approx. 770 × 770 mm Weight: approx. 90 kg • 2 adapter plates, approx. 770 × 770 mm Weights: approx. 45 kg and approx. 40 kg • 1 adapter plate, approx. 770 × 770 mm Weight: approx. 35 kg • 1 adapter plate with circular cutouts Weight: approx. 25 kg • 1 round adapter plate Weight: approx. 20 kg • 1 clamping rail / linear adapter Weight: approx. 25 kg • 1 precision adapter block Weight: approx. 3.06 kg • 1 steel adapter plate Weight: approx. 2.18 kg • Additional adapter and fastening parts as shown in the images Features Solid aluminum constructions Reinforced expander plate with central mounting Precision-manufactured adapter plates Bore and thread grid for flexible test specimen mounting Adapter plates in various sizes Round adapter plate Adapter plate with circular cutouts Clamping rail / linear adapter Precision adapter block Additional accessories as shown in the images Application areas Electrodynamic shakers Vibration test benches Vibration testing Material testing Environmental simulation Fatigue testing Automotive industry Aerospace Research and development Test specimen mounting and special constructions Shipping information Shipping on a pallet or pickup possible. Due to the high total weight, shipping will only be by freight forwarder. Condition Used. Optical condition as shown in the images. Normal wear and tear, scratches, and pressure marks present due to age. Some minor edge damage from previous use. Scope of delivery Complete accessory kit as shown in the images. Expander plate Several adapter plates Round adapter plate Adapter plate with circular cutouts Clamping rail / linear adapter Precision adapter block Additional adapter and fastening parts as shown in the images. Note: Only the accessories shown in the photos are being sold. The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping information Bodpfx Aszp D Tksigjlk Shipping on a pallet or pickup possible. Due to the high total weight, shipping will only be by freight forwarder. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), Weiss TS 130 Temperature Shock Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: TS 130 Machine Type: Temperature Shock Test Chamber Test Chamber Volume: approx. 130 liters Operating Hours: approx. 108.7 hours For sale is a used Weiss TS 130 temperature shock test chamber with S!MCON/32 control system. The two-chamber system enables rapid temperature changes between a hot chamber and a cold chamber. The test specimen is moved between the chambers using a lift basket. Suitable for temperature cycling and temperature shock tests, material testing, quality assurance, electronics testing, as well as research and development. Temperature Data: Temperature Range Hot Chamber: +60 °C to +220 °C Temperature Range Cold Chamber: −10 °C to −80 °C Switching Time between Hot and Cold Chamber: approx. 10 seconds Temperature Stability: approx. ±1 K Test Chamber: Test Chamber Volume / Lift Basket: approx. 130 liters Dimensions Lift Basket (W × D × H): approx. 500 × 600 × 450 mm Maximum Load of Lift Basket: 20 kg Maximum Load per Insert Shelf: 10 kg Electrical Data: Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 14.0 kW Rated Current according to Nameplate: 26.0 A Connection: CEE 32 A Recommended Fuse: 35 A slow-blow Protection Class: IP20 Refrigeration System: Refrigerant: R404A, Filling Quantity 2.2 kg Refrigerant: R23, Filling Quantity 1.2 kg Maximum Low Pressure: 18 bar Bedpfx Aezp D D Noigolk Maximum High Pressure: 25 bar Standing Pressure: 11 bar Cooling Water Data: Water Inlet Pressure: 2–6 bar Connection: R 1/2 inch Cooling Water Consumption at Full Load: approx. 0.3–0.6 m³/h Maximum Particle Size: 40 µm Dimensions and Weight: External Dimensions (W × D × H): approx. 1,820 × 900 × 1,990 mm Width Including Door Hinge: approx. 1,850 mm Depth Including Removable Door: approx. 1,155 mm Additional Depth of Removable Touch Panel: max. 170 mm Weight of Test Chamber without Options: approx. 950 kg Weight of Separate Cooling Unit: not determined Equipment: S!MCON/32 control system with external touch panel Two-chamber design with lift basket Viewing window Adjustable temperature limiter Digital and analog I/O RS232 and RS485/RS422 interfaces Potential-free contact Connection for external Pt100 sensor Separate cooling unit as shown in the pictures SIMPATI 3.0 software and extensive documentation as shown in the pictures Condition and Scope of Supply: Used Operating hour counter shows approx. 108.7 hours. Optical condition as shown in the pictures. Scope of supply includes separate cooling unit, software, documentation and accessories, exclusively as shown in the pictures. Loading and shipping via forwarding agent possible upon agreement. Subject to changes, errors and prior sale.