Used Fliegl Sds 420 Multi High Cube for sale (26,043)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Iedpfx Aji Ri Aysnveau Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,800 kg, maximum load weight: 34,200 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 13,500 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis, semi-trailer, container Fine-grain steel welded construction, kingpin plate with 2 interchangeable kingpins Container mounts: 1 x 40 ft with gooseneck tunnel, front extension extended: 1 x 45 ft with long gooseneck tunnel and rear overload Transport of filled tank containers is not permitted. Without rear height adjustment and without folding center supports, transport of containers without a tunnel is not possible. 2 container guides, incl. connection plate for electrical, air and brake connections (connections positioned upwards) Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without extension compensation Wedge blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Semi-fender with anti-spray flaps according to EC Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Iajdpfxei Riwms Anveu Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy servicing. Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Test connection for brake cylinder pressure on the EBS module, located externally. Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, brand at manufacturer's discretion Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the sides (Note! In certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connection cable Operating instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total train length of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau, 10-year guarantee against rust penetration Support legs black coated without pallet box paint Note: Archive images!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,800 kg, maximum load weight: 28,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,480 mm, total length: 13,200 mm, total width: 2,550 mm, total height: 2,645 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to individual customer requirements. Chassis, Fifth Wheel, and Transport Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" kingpin, mounting position for warning signs at the rear, outer frame with "Load-Lock profile" for lashing straps, 24-ton capacity, two-speed landing gear, single-sided operation, lashing eyes, yellow marked, 2 of which are located at the rear as towing eyes, container locking: 4 pairs of container locking mechanisms embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, pocket recesses embedded in the outer frame, 80 x 80 mm internal dimensions, pocket recesses embedded in the center of the floor, 80 x 80 mm internal dimensions, plug-in crossbars B=80/ D=80/ L=1200 mm, hot-dip galvanized, lashing eyelets embedded in the outer frame, 5 tons each, 2 storage boxes b= approx. 1230 / h= approx. 450 mm, closed and mounted across the entire width in front of the axles, replacing side impact protection, front locking mechanism can be inserted as a pin, lashing/crossbar rails embedded transversely in the floor across the entire width to the outer frame, approx. 100 mm high, with 20 mm round steel rails, top and bottom, distance from top to bottom approx. 60 mm (of the round steel), with angle sheet at the bottom as a closure, open halfway downwards for lashing and inserting crossbars 80 x 80 mm, storage compartment for warning signs, open, as technically possible. Axles and Suspension SAF disc brake axles, "axles/chassis laser-measured" to reduce tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brake", 2 driving heights, can be switched over via hand knob: 1 x for saddle height 1120 mm 1 x for saddle height 1200 mm Braking System 2-line compressed air braking system, color-coded lines for easy maintenance, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, EBS, electronic braking system with EBS socket at the front, with lifting and lowering valve, vehicle - driving stability system Wheels and Tires 385/65 R 22.5", steel rims, factory silver Electrical System 24 Volt, 4 x 3-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable Rotating beacon with holder, switched via parking light (light can be removed) 2 pairs of warning signs double LED illuminated, extendable to 4500 mm and removable with plug. With additional holder at the rear Additional 7-pin socket (according to ISO 1724) in the underride guard at the rear Iodpfx Aezb Iu Denvjau Floor Sieve-printed panels approx. 30 mm thick, transverse impact protection with omega inserts, on longitudinal cross members for high point load capacity for forklift axle load up to max. 7100 kg Front Wall / Front Corner Posts 25 mm aluminum hollow profile, 1650 mm high, corner posts steel in volume design Front wall additionally covered with 1250 mm high sieve-printed panel on the inside "Crash blocker", at the bottom inside at approx. 140 mm height with steel ram protection Storage compartment for plug-in crossbars 80 x 80 on the inside of the front wall Painting Frame: Hot-dip galvanized including passivation or pa

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2013, Equipment: ABS, Fliegl walking floor * EZ 22.05.2013 * 3 axles * 92 cubic meters * 1st axle lift axle * 1 vehicle owner / 1 owner * German trailer / German walking floor * Empty weight: 7,525 kg * Permissible total weight: 35,000 kg * SDS 350 * Tires: * 1st axle 385/55 R 22.5 v.l. 5 mm & v.r. 8 mm * 2nd axle 385/55 R 22.5 v.m.l. 10 mm & v.m.r. 9 mm * 3rd axle 385/55 R 22.5 h.l. 5 mm & h.r. 8 mm * All information without guarantee * The HU/SP will be renewed before the sale / We renew HU/SP ("TÜV") before Sale * Further information and criteria on additional services * Repainting, retrofitting possible * Short-term license plate / Customs license plate * Transfer and shipment possible * Help with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing possible * Own workshop * Mówimy po polsku. * We speak English. * Goworim po russki Iajdpfx Ajqk Tf Tenveu * The repainting in your desired color is possible in our house at a reasonable price and in good quality. * You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2015, Equipment: ABS, Fliegl walking floor * EZ 06.03.2015 * 3-axles * 92 cubic meters * 1st axle lift axle * SDS 390 * Empty weight: 7,200 kg * Tires: * 1st axle 385/55 R 22.5 v.l. 8 mm & v.r. 11 mm * 2nd axle 385/55 R 22.5 v.m.l. 10 mm & v.m.r. 11 mm * 3rd axle 385/55 R 22.5 h.l. 10 mm & h.r. 9 mm * German trailer / German semitrailer * 1 vehicle owner / 1 owner * All information without guarantee * Further information and criteria on additional services / Additional service * Repainting, retrofitting possible / repainting possible * Short-term license plate / customs license plate * Transfer and shipment possible Iajdpfsrvu Snsx Anvou * Help with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimal financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop * Mówimy po polsku. * We speak English. * Goworim po russki * The repainting in your desired color is possible in our house at a reasonable price and in good quality. * You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024358, empty load weight: 6,149 kg, maximum load weight: 28,851 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, suspension: air, tire size: 385/65 R22.5", color: blue, The images are archive photos; the vehicle may still be in use! Chassis Platform Semi-Trailer for Freight Forwarders Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock" profile for lashing strap attachment Note: In order to attach the straps in combination with side walls, the side walls must be opened! Pair of additional lashing rings integrated into the outer frame, each rated at 2.5 t 24 t, two-speed landing leg, single-sided operation, with straight base, without compensation mechanism Pull-out ladder at the rear Side-mounted door retainers Wheel chocks with holders Pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or rear swing clearance approx. 1,930 mm Underrun protection, galvanized steel Full-width rear spray flaps Half-shell mudguards With anti-spray mud flaps only on the last axle Rear impact guard "Blocker" – galvanized crosswise steel angle as forklift and hinge protection Pair of ferry lashing eyes, marked yellow Pallet stop on both sides, approx. 15-20 mm high, bolted design; loading height is reduced by approx. 15-20 mm Spare wheel holder for one electronic wheel, including wheel mounting kit, basket type, brand Schoch! Spare wheel, same brand/type as main tires, steel rim Iasdpfx Aewyiw Esnvou Stainless steel toolbox, width=600/height=400/depth=500 mm, with polished, lockable door Stake pockets Front right: 5 rows of aluminum V-stake inserts Front left: without stake inserts Rear wall / rear corner posts Rear corner posts made of steel up to the lower edge of the roof, curtain pole mount with round tube and curtain tension ratchet Rear portal doors, 2-leaf design, each with 2 internal rotary bolt locks Curtain Curtain with welded horizontal and vertical straps Quick Lock system for side curtain with central locking, on left side only Stainless steel tension locks on right side Customs rope all around with holder at front wall (no customs seal, not in combination with Quick Lock) Customer labeling on side curtains and rear portal Curtain with high-strength embedded spring steel strips, left side (Attention! When fitted, no stake inserts front left) Roof Sliding roof, rear end-lift foldable upwards, sliding tarpaulin from rear to front, tarpaulin color: white EcoLift – roof can be raised by approx. 380 mm, both sides, gas strut assisted Optimal rain gutter at rear, upper end rail, above the doors Paintwork Frame: Hot-dip galvanized incl. passivation Landing legs: black coated Front corner posts: galvanized and painted to match front wall color Front wall: MB 5328 blue Rear corner posts: galvanized and painted to match rear wall Rear wall: MB 5328 blue Curtain: RAL 5010 gentian blue Pallet box lid: RAL 2011 deep orange The images are archive photos; the vehicle may still be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902029406, empty load weight: 5,800 kg, maximum load weight: 29,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2021, next inspection (TÜV): 06/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, suspension: air, tire size: 385/65 R22.5", color: silver, The images are archive images; the vehicle may still be in use. Chassis, semi-trailer, transport company Fine-grain steel, welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil well approximately 8,040 mm long, 6 coil supports (coil pockets, internal dimensions 82 x 52 mm), coil cover with screen-printed panels and steel crossbars, 2 gap band covers for the coil well, each approximately 293 mm wide, tare weight approximately 13 kg per cover, outer frame slightly angled with "Load-Lock profile" for securing lashing straps, note: to attach the straps in conjunction with the side panels, the side panels must be opened! 9 pairs of lashing eyes, each rated at 5 tons, embedded in the area of the coil well, 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without slide-out compensation, note: free support foot clearance or free rear swivel radius approximately 1930 mm, without supports, extension ladder at the rear, door latch on the side, 2 chocks with holder, aluminum side impact protection, bracket positioned transversely to the longitudinal beam and attached to the longitudinal beam to support aluminum slats, aluminum underrun protection, semi-elliptical fenders, with anti-splash flaps according to EC regulations, rear impact protection, 1 plastic toolbox, 2 pairs of stake pockets embedded in the outer frame, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 19219, Iaedpowhp A Dofx Anveu 2 stake pockets embedded centrally in the floor, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 192198, note: stake pockets/recesses are not designed for the sole securing of long materials, pipes, etc., without wrapping. Axles + Suspension SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight, air suspension, without lift axle. The images are archive images; the vehicle may still be in use.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34002026856, empty load weight: 5,592 kg, maximum load weight: 29,408 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", color: white, The images are archive images! The vehicle may be in use! Chassis: Saddle for trucking company Fine-grained steel welded construction in reinforced Scandic design, saddle plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock profile" for securing lashing straps Lashing rings for use in the "Load-Lock profile", 6 tons each, loose 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Free swivel radius to the support leg approx. 2200 mm, support leg dimension approx. 2350 mm 2 shims with holder Side impact protection, aluminum Under-run protection, galvanized steel Quarter panel fenders in front of and behind the axle unit with anti-spray flaps, only on the last axle 1 plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) 1 pair of pole pockets recessed in the outer frame/floor at the very front, inner dimension 83 x 83 mm 2 steel poles, B=80/ D=80/ L=1200 mm, hot-dip galvanized Note: The pole pockets / insertion poles are not designed for the sole securing of long materials, pipes, etc. without lashing 4 pairs of lashing eyes, yellow marked Axles + Suspension 3 BPW drum brake axles "Axle/chassis laser-measured" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS brand Wabco Premium, electronic braking system with EBS socket at the front, without connecting cable, Wabco Premium incl. open CAN BUS for telematics Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plate lighting in LED (Note! In certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front Iaodpfex Rq Sljx Anvju 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Front panel / corner posts at the front 2 580 mm high, corner posts made of steel in a full volume design, release mechanism for side tarpaulin on the front panel "Crash-Blocker", at the bottom inside at approx. 140 mm height with steel ram protection Sliding battens Rows of wooden sliding battens Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tensioning devices made of stainless steel Floor Sieve plate approx. 30 mm thick, on longitudinal crossbeams for high point load capacity for forklift axle load up to max. 7100 kg Note: Floor deformation due to weather conditions possible (no guarantee)! Rear panel / corner posts at the rear Corner posts at the rear made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal swivel bar locks each Roof Sliding tarpaulin, rear lift that can be folded up, with tarpaulin that can be slid from back to front, tarpaulin color: white optimal rain gutter at the rear, at the top of the rear beam, above the doors Country of approval / plates Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the side a

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902017848, empty load weight: 6,537 kg, maximum load weight: 28,463 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2015, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", color: silver, The images are archive images! The vehicle may be in use! Fine-grain steel welded construction in lightweight design, kingpin plate with 2 replaceable kingpins, outer frame slightly angled with Load-Lock profile for attaching lashing straps. Note: to attach the straps in conjunction with the side walls, the side walls must be opened. 24-ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-pull compensation, door lock on the side, support wedges with holder, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: free support leg angle or free rear pivoting radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle, with anti-splash flaps only on the last axle, rear impact protection, pallet stop on both sides approx. 20 - 25 mm high, bolted design, loading height reduced by approx. 20 - 25 mm. Iedpfx Aekyrmijnvoau BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and starting assist, operation of 3 brakes (with starting assist up to max. 25 km/h). Floor: Sieve plate approximately 30 mm thick, cross members with omega insert, on longitudinal stringers for high point load capacity for forklift axle load up to max. 7100 kg. Front wall/corner posts: 2,480 mm high, corner posts steel in full-volume design, release device for side tarpaulin on front wall, at the bottom inside at approx. 140 mm height with steel impact protection. Roof: Sliding tarpaulin, rear end lift that folds up, with tarpaulin that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between roof beams approx. 2,490 mm, tarpaulin color: white, lifting roof hydraulically with hand pump at each corner post, can be raised by 400 mm. Can be driven with the roof raised, adjustable by 4 x 50 mm upwards. Note the overall height! Includes tarpaulin extension by 200 mm, only in conjunction with the tarpaulin.

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2015, loading space length: 13,600 mm, loading space width: 2,520 mm, Equipment: ABS, Schmitz Cargobull S01 Flatbed with Lifting Axle and SAF Axles Ref. No. for inquiries: 1225958 * ABS * EBS * 3 axles, air-suspended * Lifting axle * Disc brakes * SAF axles Loading area dimensions: Iaedpfxoyavigj Anvou Length: 13,600 mm Width: 2,520 mm Tyres: 1st axle: 385 / 55 R 19.5 30% air-suspended / lifting axle 2nd axle: 385 / 55 R 19.5 30% air-suspended 3rd axle: 385 / 55 R 19.5 30% air-suspended ----Price: €3,900 + 19% VAT For further questions, you can reach us at the following phone numbers: * We speak: German, English, French, Polish, and ????? Errors, omissions, and prior sale reserved.

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2013, loading space length: 13,600 mm, loading space width: 2,520 mm, Equipment: ABS, Schmitz Cargobull S01 Platform Lift Axle Aluminum Side Walls Stakes STEEL TRANSPORTS Internal Reference Number for inquiries: 0326236 * ABS * EBS * 3 axles air-suspended * Lift axle * Disc brakes * BPW axles * Aluminum side walls * Stakes Loading area length: Length: 13,600 mm Iajdpfxjyulw Ns Anvju * Width: 2,520 mm Tires: 1st axle: 385 / 65 R 19.5 20% air-suspended / lift axle 2nd axle: 385 / 65 R 19.5 20% air-suspended 3rd axle: 385 / 65 R 19.5 20% air-suspended ---Price: 9,900 EUR + 19% VAT For further questions, you can reach us at the following phone numbers: * We speak: German, English, French, Polish, and ????? Subject to typing errors, errors, and prior sale.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34202036640, empty load weight: 6,213 kg, maximum load weight: 35,787 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2025, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22,5", color: yellow, The images shown are archive photos; the vehicle may still be in use! Approx. fifth wheel height: 1200 mm Chassis: Semi-trailer tipper Basic lightweight construction, kingpin plate with interchangeable 2" kingpin, patented curved front bulkhead Folding underrun protection, underrun protection with spring assistance for easier handling Integrated mudguard bracket with stone-repellent surface Axles & Suspension: SAF disc brake axles with 430 mm disc diameter; axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle including forced lowering and starting aid, activation by "3x braking" (starting aid is functional up to a 30% axle overload and up to a maximum speed of 25 km/h) Braking system: 24 Volt EBS electronic braking system with EBS socket at the front (no connection cable), test port for brake cylinder pressure routed to the outside of the EBS module, with raise & lower valve Paver brake, electrically operated from the truck without truck installation, automatic tipper lowering with shut-off valve "TPMS" tire pressure monitoring system as per ECE R141, display via monitor in towing vehicle through EBS (requires appropriate truck setup; only for standard tires) Iajdpfx Aeyylaponvsu Axle load detection via EBS-CAN bus signal for display in the cab; truck must be preconfigured, no truck installation Wheels and Tires: 385/65 R22.5 steel rims Electrics: Side-mounted yellow LED lights synchronised with indicators (flashing side lights) 2 white front position LED lights 2 white/red rear marker LED lights LED work lights on both sides; 2 additional work lights integrated into the rear Hydraulics: Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO (power take-off) Body/Tub: Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount. Internal ladder at the front bulkhead Greenline - conical and aerodynamic body shape “Membrane” tailgate Tailgate as hydraulic rear door opening upwards; clearance approx. 2,200 mm Side walls continuously 5 mm thick, base continuously 8 mm thick Body is insulated version, Fliegl Asphalt Profi Thermo, body insulated at the front, sides, bottom, and rear with Fliegl Isotherm "Flip Top sliding cover", automatic rear lock as folding hoop. Cover built to front. Electrically operated cover with 7-pin plug (charging plug) at front, no connection cable, no truck installation; operation on trailer and via remote control. Operational notes: For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent damage and corrosion from the material. The specified gross weight is technically possible, but depending on the load, the gross weight may not be achievable while observing permissible axle, support, and coupling loads. (Improper load distribution may lead to poor driving and tracking performance) Paintwork: Frame: DB 7350 Nova Grey "10 years warranty against corrosion" Support legs: black coated Body: RAL 1007 Narcissus Yellow Roll tarp: RAL 7038 Agate Grey

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902037402, empty load weight: 6,460 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2026, next inspection (TÜV): 03/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,010 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, ground clearance: 310 mm, The images are archive images // The vehicle may still be in use! Tarp color can be freely selected. - Patented "D-Lock" door latch for I-Lock closure (not in combination with a direct tarp tensioner), awarded with the "INTERNATIONAL TRAILER AWARD 2025". - Pallet box for 24 Euro pallets (ground clearance approx. 310 mm). - "Heavy Blocker" rear impact protection + "roller ramp buffer" on the side. - 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable, mounted on both sides behind the axle assembly. - 1 storage box for fire extinguishers up to 6 kg, mounted on the front wall. - 1 fire extinguisher (ABC powder, 6 kg). - 1st axle: automatic lift axle, including forced lowering and starting assistance, activated by "3x braking". - 3 pairs of sliding bars, adjustable over the entire length, with 4-fold insertion pockets and a long pocket at the bottom. - 5 rows of aluminum V-shaped insertion slats (in combination with side walls, 4 rows). Iaedpfjyc D H Sox Anvju - 2 pairs of Vario steel slats, in combination with Vario beams for front and rear load securing. - Fliegl quick-release cover. - Roof: non-elastic, minimal deflection of the roof beam during loading and unloading. - Optimal rain gutter at the rear, at the top of the end rail, above the doors. - Fliegl manufacturer certificate for superstructure strength according to EN 12642 XL. Tarp color can be freely selected.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,200 kg, maximum load weight: 27,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 R22,5", Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis, Saddle, and Transport Company Fine-grained steel welded construction in lightweight design, saddle plate with 2 interchangeable kingpins, main frame reinforcement for 25 tons in the center of gravity at a loading length of 3 m in the retracted state. 13 pairs of hooks for tie-down strap attachment welded onto the cross members. 23 pairs of lashing eyes recessed in the outer frame, each rated at 3.5 tons. Outer frame with Load-Lock profile for tie-down strap attachment. Note: Not usable with sideboards! 24 tons, 2-speed support leg in reinforced design for loaded docking, single-sided operation. Chocks with holder. Aluminum side impact protection. Underrun protection. Semi-fender mudguards. with anti-spray flaps according to EC standards. 1 spare wheel holder for 1 wheel, with wheel fastening kit. 1 closed stake pocket box, open at the top, below the loading platform, doors on both sides, w=450 mm/H=400/420 mm/d=2460 mm. 6 pairs of extendable stake pockets for square tube stanchions 80x80 mm, extendable from loading width of 2000 mm to 3100 mm. 4 pairs of stake pockets recessed in the outer frame, for square tube stanchions 80x80 mm. 11 stake pockets recessed in the middle of the floor, for square tube stanchions 80x80 mm, with reinforcing beam, installed between the outer stake pockets. 5 x 3 pairs of stake pockets recessed on the outside of the longitudinal beams, for square tube stanchions 80x80 mm, including reinforcing beams – for load securing to the front and rear for the transport of construction steel mesh 2x5000 mm or 2x 6000 mm. 6 lightweight plug-in stanchions, B=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, with rope guide at the top for strap tensioning. 12 lightweight plug-in stanchions, B=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded on at the bottom on both sides. Iaodpfxei Ri Sze Anvou Note: Stake pockets/plug-in stanchions are not designed for the sole securing of long materials, pipes, etc. without wrapping. 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock. (Lock not included) 6 construction steel winches with wire rope and swivel hook, with rope passage through the outer frame, 1 removable attachment gearbox for construction steel winch – supplied separately. Telescoping Main frame telescopic extendable by max. 4,000 mm and lockable approximately every 500 mm. Locking with pneumatic pin locking + display of frame locking on both sides, operated via a hand knob, control for brake/locking and suspension on the left front above the axles. Storage compartment between the longitudinal beams in the extended state. Axles + Suspension SAF disc brake axles with 430 mm disc diameter. Last axle with trailing arm steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via a hand knob, as well as manually via a switch in the towing vehicle (Pin 10), without truck installation. Axle spacing offset mm Air suspension 1st axle automatic lift axle, additionally electrically operated from the truck, with start-up aid. Braking system 2-line compressed air braking system. Color-coded line routing for easy servicing. Spring-loaded parking brake. 2 fail-safe coupling heads at the front. EBS manufa

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014232, empty load weight: 5,900 kg, maximum load weight: 29,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2025, loading space length: 13,650 mm, loading space height: 900 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,638 mm, suspension: air, tire size: 235/75 R17,5", color: silver, The images are archive images! The vehicle may be in use! Chassis: Semi-trailer for transport companies Fine-grain steel welded construction, kingpin plate with interchangeable 2" kingpin Suitable for transporting construction/agricultural machinery up to a maximum gross weight of 24,000 kg and with a maximum width of 2,480 mm (however, the track width of the construction/agricultural machinery or vehicles to be transported must not exceed 2,200 mm). Mounting rail for aluminum ramps at the rear (wider construction/agricultural machinery must not be loaded). Outer frame slightly angled, new design with "Load-Lock" profile for securing lashing straps. 14 pairs of lashing points recessed into the outer frame, 2.5 tons each. 6 pairs of lashing points recessed into the outer frame, 5 tons each. 24-ton, 2-speed support jacks, single-sided operation, with straight lower part, without thrust compensation. Free support foot angle or free swivel radius to the rear approx. 1920 mm. Foldable rear support. 2 x chock blocks with holder. Aluminum side impact protection. Steel underride protection. Quarter panel fenders in front of and behind each axle. With anti-splash flaps behind each axle. 1 x spare wheel holder for 1 spare wheel, with wheel fastening kit. 1 x spare wheel, same manufacturer as the standard tires, steel rim. Axles + Suspension SAF drum brake axles. "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption. Air suspension. 1st axle: automatic lift axle, additionally electrically operated from the truck, including forced lowering and start-up assist, without truck installation (the start-up assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h). Braking System Iasdpfxsxb D Swo Anveu 2-line compressed air braking system. Color-coded line routing for easy servicing. Spring-loaded parking brake. 2 fail-safe coupling heads at the front, without connecting line. 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lifting and lowering valve. Vehicle - Driving Stability System. "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the towing vehicle's display, via EBS, without truck installation (this requires the truck to have the necessary capabilities. Only for standard tires). Wheels and Tires 235/75 R17.5 twin tires. Steel rims, factory silver. Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. Yellow LED lighting on the sides linked to the turn signal ("flashing side marker lights"). 2 white position lights at the front in LED. 2 white/red outline lights at the rear. 2 x 7-pole fail-safe sockets at the front, without connecting cable. Floor Sieve plate, approx. 30 mm thick, for high point load capacity for forklift axle loads up to a maximum of 5,600 kg. Front Wall / Corner Posts 25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a robust design. Front wall additionally covered with sieve plate, 1250 mm high. Frame hot-dip galvanized. The images are archive images! The vehicle may be in use!

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902036561, empty load weight: 5,820 kg, maximum load weight: 29,180 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, suspension: air, tire size: 385/65 R22,5", color: red, Please note that the images are archive images! The vehicle may be in use! Tarp color can be freely selected. Chassis: Semi-trailer chassis Fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin Outer frame slightly angled, new design with "Load-Lock profile" for lashing strap attachment 3 pairs of lashing points additionally integrated into the outer frame, each 2.5 tons 14 pairs of lashing points additionally integrated into the outer frame, each 2.5 tons 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, with stroke compensation Manufacturer: SAF Note: Free support leg angle or free rear swivel radius approx. 1930 mm Extension ladder at the rear Door latch on the side 2 shims with holder Aluminum side impact protection Painted in RAL 3002 carmine red No liability/paint guarantee for overpainted coated components. Rear underrun protection, steel, galvanized Painted in RAL 9010 pure white, also the underrun protection holder No liability/paint guarantee for overpainted coated components. Quarter panel fenders in front of and behind the axle group With anti-spray flaps according to EC Rear impact protection 1 aluminum ladder approx. 2,550 mm, with holder on the side, behind the side impact protection Attachment rail on the outer frame for attaching tarp tensioners, in a bolted design approx. 15-20 mm above the loading area, with a hole profile at the top for lashing strap attachment, the Load Lock outer frame must be usable (as there are no lashing points). Can be used in conjunction with an aluminum insertion strip at the bottom as a stop! (not in conjunction with sideboards) 2 plastic toolboxes, w=800/h=450/d=450 mm 1 each on the left and right front, behind the 3rd axle Axles + Suspension BPW disc brake axles with 430 mm disc diameter Hubs painted in RAL 3002 carmine red "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line 24 Volt EBS, manufacturer Wabco, Electronic Braking System with EBS socket at the front, without connection cable Caution: The trailer may only be towed by towing vehicles which guarantee the effectiveness of the ABS! With lift and lower valve + auto-reset function Vehicle - Driving Stability System Telematics, including LIN battery, coupling sensor and tracking (without contract, this must be concluded by the customer). Wheels and tires 385/65 R22.5", manufacturer's choice Polished aluminum rim, manufacturer Alcoa Dura-Bright Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Light carrier painted in RAL 9010 pure white No liability/paint guarantee for overpainted coated components. 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable LED work lights on the side (switched via reversing light) Positioned at the height of the first crossmember behind the support legs 2 additional LED work lights at the rear, switched via reversing light Tarp Ijdpfx Anjxbzkkevsau Tarp with welded-in horizontal and vertical straps Customer lettering on the rear portal, tarp color can be freely selected.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33802037879, empty load weight: 3,250 kg, maximum load weight: 34,750 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 6,790 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, available in multiple units Chassis, semi-trailer, container Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin Container fittings: 1 x 20 ft, flush at the rear (Note: low drawbar load with 20 ft container) 24 tons, 2-speed landing gear, single-sided operation, with semi-circular base and straight connection plate, with stroke equalization 2 support wedges with holder Rear underrun protection, steel Spray flaps at the rear, covering the entire width Half-shell fenders with anti-spray flaps according to EC Storage box for fire extinguishers up to 6 kg Fire extinguisher (ABC powder 6 kg) incl. stainless steel drip tray in the center of the rear container crossbeam, approx. 290 mm wide Axles + Suspension BPW disc brake axles, with 430 mm disc diameter "Axles/chassis laser-aligned" - reduces tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport), up to 44 tons total weight Air suspension 1st axle, automatic lift axle, including forced lowering and start assist, activated by "pressing the brake pedal 3 times" (start assist is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Braking system 2-line pneumatic braking system Color-coded line routing for easy servicing Spring brake parking brake 2 tamper-proof coupling heads at the front, without connecting line 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5", manufacturer at the discretion of the manufacturer Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 1 x 15-pin socket at the front, without connecting cable Operating instructions The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and drawbar loads. (Poor driving and handling characteristics possible due to incorrect load distribution) Country of registration/plates Germany with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-row license plate holder Warning sign "A" for waste transport, foldable ADR approval according to FL/AT with ADR warning sign at the rear Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Isdszbtnijpfx Anveau Paintwork Frame RAL 2011 traffic orange "10-year warranty against rust-through" Support feet black coated available in multiple units

Condition: used, maximum load weight: 28,933 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2015, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 3,000 mm, loading space volume: 101 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Edscha sliding roof * Haldex EBS, ABS, LSV * Lift axle * Toolbox * BPW Eco Plus axles with disc brakes ----* Tire size: 385/55R19.5 * Total length: 13,850 mm * Unladen weight: 6,067 kg * TÜV & SP: expired -----Subject to errors & prior sale Vehicle number 5726 Iodpfx Aovhvcfenveau WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: used, maximum load weight: 28,933 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2015, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 3,000 mm, loading space volume: 101 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Edscha sliding roof * Haldex EBS, ABS, LSV * Toolbox * BPW Eco Plus axles with disc brakes ----* Tire size: 385/55R19.5 * Overall length: 13,850 mm * Own weight: 6,097 kg * TÜV & periodic inspection: expired -----Subject to errors and prior sale Vehicle number 5732 WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Ijdpfxovhv H Rs Anveau Whatsapp Whatsapp

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,680 kg, maximum load weight: 35,320 kg, overall weight: 50,000 kg, axle configuration: 3 axles, loading space length: 10,300 mm, loading space width: 2,520 mm, loading space height: 600 mm, total length: 15,400 mm, total width: 2,550 mm, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet customer needs. Chassis, low-loader semi-trailer Steel welded construction, kingpin plate with 2 interchangeable kingpins Iedpji Ri Hgefx Anveau 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without sliding mechanism Foldable rear support 2x chock blocks with holder Aluminum side impact protection Quarter panel fenders in front of and behind the axle unit with splash guards behind each axle 1x storage box, w=2,350 mm x l=730 mm x h=640 mm, mounted transversely at the front on the floor of the gooseneck, with 2 trays Extendable widening elements to 3,000 mm (not in the rear slope) (the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on the gooseneck, at the front Wooden planks 70 mm for widening to 3,000 mm Excavator arm recess starting above the rear axles to the rear, approx. 500 mm wide and approx. 230 mm deep Lashing eyes, low-loader 3 pairs of lashing eyes, each 10 tons, at the front of the gooseneck, 8 pairs of lashing eyes, each 10 tons, in the low bed, 3 pairs of lashing rails in the driving lane area of the low bed, 3 pairs of lashing eyes, each 10 tons, in the axle/rear area Axles + Suspension SAF drum brake axles Axle/chassis laser-measured to reduce tire wear and fuel consumption with steering axle Air suspension Wheels and tires 235 / 75 R 17.5 according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles which guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, without connection cable with lifting and lowering valve, holding function in lowered position + auto-reset function Axle load detection via EBS-CAN bus signal, for display on the instrument panel in the driver's cab, truck must be correspondingly pre-configured, no truck installation (no calibrated scale) Vehicle - driving stability system Trailer Info Center, for displaying vehicle data such as axle loads (no calibrated scale), mileage and diagnostic/system messages. Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front 1x additional LED work light at the rear 1x LED rotating beacon with holder, switched on with the parking lights 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with steel/non-slip steel plate surface in the driving lane area with 70 mm softwood floor, in the wheel arch area steel/non-slip steel plate surface, low bed on the left and right in the driving lane area can be hydraulically raised for access, via truck auxiliary drive Rear slope with 70 mm softwood floor Low bed length approx. 6,300 mm Side walls 25 mm aluminum hollow profile, 400 mm high, can be plugged in at the front and on the sides of the gooseneck Ramps Steel ramps 2,800 mm long, 750 mm wide Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The ve

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 11,800 kg, maximum load weight: 29,200 kg, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 9,350 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,650 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-tailored transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis: Low-loader, semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions 24 tons, 2-speed landing gear, single-side operation, with semi-circular lower part and straight connection plate, with slide-out compensation Foldable rear support Chocks with holder Iodpfx Asi Ri E Uonvsau Aluminum side impact protection Splash guards in front of the 1st axle and behind each axle with anti-spray, according to EC regulations Toolbox, stainless steel, w=600/h=400/d=500 mm, with polished door, lockable Hydraulic lift table after gooseneck, approx. 3000 mm long, hydraulically adjustable for crossing the gooseneck, with mechanical locking in the raised position. Operation with radio remote control Electric winch, 24 volts, pulling force 8165 kg, mounted in the center at the front of the loading platform, standing on the gooseneck, in a stainless steel box with a door (if technically possible, further verification required), operation with radio remote control, rope length 35 m x approx. 10 mm, with roller rope guide and removable guide rollers on the gooseneck and rear slope. Tie-down points, low-loader Gooseneck: 5 pairs of tie-down points embedded in the outer frame, each rated at 5 tons. 2 pairs of tie-down points in the center, each rated at 5 tons. 1 pair of tie-down mushrooms embedded at the top and outside in the outer frame on the neck slope, each rated at 10 tons. Main platform: 4 pairs of tie-down points embedded in the outer frame, each rated at 5 tons. 4 pairs of tie-down points in the center, each rated at 5 tons. 1 pair of tie-down mushrooms embedded at the top and outside in the outer frame, each rated at 10 tons. Rear slope: 4 pairs of tie-down points embedded in the outer frame, each rated at 5 tons. 5 pairs of tie-down points in the center, each rated at 5 tons. 4 pairs of tie-down mushrooms embedded at the top and outside in the outer frame, each rated at 10 tons. Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Last axle with steering joint, with automatic reversing lock via reversing light, and additional locking function on the vehicle via a button. Air suspension with raise/lower valve, with holding function for lowering + auto-reset function Wheels and tires 235 / 75 R 17.5 According to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system Spring-loaded parking brake Vehicle - Vehicle stability system Axle load detection via EBS-CAN bus signal, for display on a screen in the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) 2 fail-safe coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear Lights completely in LED design 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front Additional LED work light(s) at the rear, switched via reversing light LED rotating beacon with bracket, switched via parking light Pair of warning signs, double LED illuminated and extendable to 3000 mm Floor

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,900 kg, maximum load weight: 26,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,300 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, low-loader, semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions, 24 tons, 2-speed landing gear, single-sided operation, with straight lower section, without thrust compensation Foldable rear support 2 chock blocks with holder Aluminum side impact protection Splash guards at the rear, covering the entire width Fenders in front of the 1st axle and at the rear of each axle with anti-spray, according to EC Extendable widening elements to 3,000 mm (not in rear slope) Storage compartment for wooden planks in the middle of the loading area Wooden planks 70 mm for widening to 3,000 mm Tie-down points, low-loader 2 pairs of ring tie-down points, each 5 tons, at the front on the gooseneck 11 pairs of tie-down eyes embedded in the top and side of the outer frame, each 10 tons 2 on the gooseneck 9 distributed in the low-loader area First tie-down point 250 mm from the front and last max. 250 mm from the rear, distance between tie-down points no more than 1100 mm 8 pairs of pocket holes embedded in the outer frame, inner dimensions 70 x 40 mm (can be converted to 5-ton ring tie-down points) Axles + suspension SAF drum brake axles Air suspension Wheels and tires 235 / 75 R 17.5 Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system Color-coded line routing for easy servicing Spring parking brake EBS, electronic braking system with EBS socket at the front, without connection cable 2 fail-safe coupling heads at the front, without connection cable with raise & lower valve Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab Vehicle - driving stability system Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connection cable Iasdpfx Anoi Ri E Rsveu 1 LED rotating beacon with holder 2 pairs of warning signs, double LED-illuminated and extendable to 3,000 mm Floor Gooseneck with steel sheet covering Storage box embedded in the transition slope to the gooseneck followed by 70 mm soft wood flooring, steel/diamond plate covering in the wheel arch area Rear slope with 70 mm soft wood flooring Low-loader area including rear slope 9,200 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood Hydraulically operated via tractor PTO with throttle, actuation on the left side in the front Hydraulic connection with SVK socket NW 10/3, without connection hoses Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,900 kg, maximum load weight: 32,100 kg, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,300 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, low-loader semi-trailer Steel welded construction, fifth wheel with 2 replaceable kingpins and 2 kingpin positions 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without push-pull compensation Foldable rear support 2 wheel chocks with holder Aluminum side impact protection Partial wheel arch fenders in front of and behind the axle assembly 1st pair of wheel recesses recessed into the gooseneck in the low-bed area, sloped for easy entry. Length at the bottom approx. 1600 mm, depth of the wheel recesses approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axles A and B. Length at the bottom approx. 350 mm, depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. If wheel loaders are to be transported and the overall height needs to be checked, please provide the technical data sheet of the wheel loader types with detailed specifications (if the overall height is exceeded). Wheel recess cover, removable from the main frame, with wooden inserts. Extensions can be pulled out to 3,000 mm (not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for wooden planks on the gooseneck, at the front, transversely Wooden planks 70 mm for extending to 3000 mm Tie-down points, low-loader 2 pairs of ring tie-down points, each 5 tons, at the front on the gooseneck 11 pairs of tie-down eyes recessed on the top and sides in the outer frame, each 10 tons 2 on the gooseneck, 9 distributed in the low-loader area, first tie-down point 250 mm from the front and last max. 250 mm from the rear, distance between tie-down points not greater than 1100 mm Iajdpsi Ri Hcsfx Anvou 8 pairs of stake pockets recessed in the outer frame, inside 70 x 40 mm, or instead of stake pockets, 5 ton ring tie-down points recessed in the floor Axles + Suspension SAF drum brake axles Axle/chassis laser-measured to reduce tire wear and fuel consumption Air suspension Wheels and tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake EBS, electronic braking system with EBS socket at the front, without connection cable 2 fail-safe coupling heads at the front with raising and lowering valve Axle load detection via EBS-CAN bus signal, for display on the display in the cab, the truck must be appropriately prepared Vehicle - driving stability system Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front 1 x LED rotating beacon with holder, switched via parking lights 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm, removable with plug Floor Gooseneck with steel / checkered plate Storage box recessed in the ramp to the gooseneck followed by 70 mm soft wood flooring, in the wheel recesses at the bottom and in the wheel well area, steel / checkered plate flooring Low-loader platform including rear slope 9,100 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp securing at the bottom

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902028859, empty load weight: 5,660 kg, maximum load weight: 29,340 kg, overall weight: 35,000 kg, axle configuration: 3 axles, total length: 13,700 mm, total width: 2,550 mm, total height: 3,700 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: red, Chassis, Semi-trailer, Transport Company Steel welded construction in reinforced design, only 2 longitudinal members as double T-beams with steel/diamond-plate between the longitudinal members, kingpin plate with replaceable 2" kingpin. Mudguard for tail lights. 8 pairs of lashing eyes screwed or welded to the frame, at the manufacturer's discretion. 24 tons, 2-speed support legs, single-sided operation, with straight lower part, without thrust compensation. Chocks with holder. Aluminum side impact protection. Galvanized steel underrun protection. Half-shell fenders with anti-spray flaps according to EC. 1 spare wheel holder for 1 spare wheel, with wheel fastening kit. 1 storage box recessed between the longitudinal members. 8 pieces of wood rack supports, at the manufacturer's discretion, screwed to the frame, each with 2 extendable wood racks from 1800 to 2800 mm, 7 tons per pair. Axles + Suspension BPW disc brake axles with 430 mm disc diameter. Air suspension with lift and lower valve, safety cable on the axles. Iaedpfx Aneza Anvevju 1st axle automatic lift axle, including forced lowering and starting aid, operated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h). Axle spacing staggered 1410/1310 mm (combined transport) up to 44 tons total weight. Wheels and Tires 385 / 65 R 22.5" at the manufacturer's discretion. Steel rims, factory silver. Braking System 2-line pneumatic braking system. Spring-loaded parking brake. Axle load recognition via EBS-CAN bus signal, for display on the dashboard in the cab; the truck must be correspondingly prepared, no truck installation (no calibrated scale). 2 non-interchangeable coupling heads at the front, without connecting cable. EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! "Safe Parking" Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable. Front wall / corner posts Steel / grid front wall, approx. 2300 mm high, screwed to the frame. Approval / Signs Country of approval: Germany. Type approval according to EC 2007/46. Prepared for single-row license plate holder. Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. Warning sign according to ECE - 70. Paint Frame: DB 7350 Novagrau (dark grey) Support legs: Black coated. Front wall: Hot-dip galvanized.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801013475, empty load weight: 7,180 kg, maximum load weight: 28,820 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, available in multiple units Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, additional splash guard riveted to the underside as a sheet of metal, in the neck area above the rear axle of the semi-trailer and above the wheels on the vehicle, frame in reinforced design for vehicle loads up to the outer frame, outer frame with "Load-Lock profile" approximately every 400 mm for securing lashing straps, 10 pairs of lashing rings embedded in the top/outside of the outer frame, each rated at 10 tons, 24 tons. Two-stage support winch, single-side operation, with semi-circular lower part and straight connecting plate, with stroke compensation, folding rear support, support wedges with holder, aluminum side impact protection, steel under-ride protection, quarter panel fenders in front of and behind each axle, with additional sheet metal splash guard above the wheels, with anti-spray flaps according to EC regulations, 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking recesses embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters, (additional transverse support required at the front and rear of the container, the container must rest evenly over its width in conjunction with the locks, transverse supports are not included in the scope of delivery), attachment rail for loading ramps at the rear extension over the entire width, rear extension mechanical, with hand crank, extendable by approximately 1,500 mm, lockable every 500 mm, including under-ride protection with lighting that can be extended, in the wheel well area with Lohr sheet metal, center with steel diamond plate, storage space for loading ramps integrated in the rear extension, usable only when the rear extension is extended by approximately 1000 mm, for transporting the ramps with the rear extension retracted - storage space for ramps in the FR, located to the right in front of the axles. Iajdsza Aiyopfx Anveu 1 pair of ramps, 3,000 mm long, 300 mm wide, load-bearing capacity per pair 6,000 kg, electric cable winch, 24 volts, pulling force approximately 8165 kg, mounted centrally at the very front, operated with a wireless remote control, cable length 35 m x approximately 10 mm, with roller cable guide and removable guide rollers. Axles + Suspension: SAF/BPW drum brake axles, at the manufacturer's choice, air suspension, 1st axle automatic lift axle, additionally electrically operable from the truck, including forced lowering and starting aid. Braking System: 2-line pneumatic braking system, color-coded line routing for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, EBS, electronic braking system with EBS socket at the front, without connection cable, with raising & lowering valve with quick vent, holding function in lowered position + auto-reset function, vehicle stability system, axle load recognition via EBS-CAN bus signal. Wheels and Tires: 235 / 75 R 17.5", manufacturer's choice, steel rims in twin arrangement. Electrical System: 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole and 1 x 15-pole tamper-proof sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, double LED illuminated and