Used Fliegl Vts 400 for sale (18,055)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802035390, empty load weight: 3,160 kg, maximum load weight: 34,840 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22,5*, color: grey, Year of construction: 2024, The images are archive images! The vehicle may still be in use! Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin (Chassis prepared for subsequent retrofitting, drip tray, 4 hose holders, steps, Fliegl standard) Container fittings: 1 x 20 ft center (or swap body container 7.15 / 7.45 / 7.82), not retractable at the front, with longer twist locks for the container locking mechanism. Nwsdpfoy Tvuwsx Aqvog 24 ton, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with sliding adjustment Wedge blocks with holder Side underrun protection Rear underrun protection with deep step for easier access + step inside Half-shell fenders with anti-spray flaps according to EC Axles + Suspension BPW or SAF disc brake axles at the manufacturer's choice, with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons total weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assist, operated by "3x braking" (start-up assist is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Braking system 2-line pneumatic braking system Color-coded line routing for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line 24 Volt EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! with raising and lowering valve + auto-reset function Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, truck must be pre-equipped accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, (Note! with certain tractor units, false diagnoses may occur, although the function is given) 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable additional LED work light at the rear, switched via reversing light Operating instructions This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration/signs Germany with Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for single-line license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side, yellow at the rear

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802030369, empty load weight: 31,110 kg, maximum load weight: 34,889 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 01/2027, total length: 7,390 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5*, color: red, Year of construction: 2022, The images are archive images; the vehicle may still be in use. Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin, container locks: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, with the longer version of the pivot pins for the container locking mechanism. 24 tons. Two-stage support jacks, single-person operation, with straight lower part, without lateral thrust compensation. Outrigger plates with holder, side impact protection, underrun protection (aluminum). With anti-splash flaps according to EC, stainless steel drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, incl. drip tray, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam. Hose racks approx. 4500 mm long (including hose box) for hose pipes 2 x DN 200 on the outside + 2 x DN 160 in the center, hose box (stainless steel) at the rear, 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes, stainless steel grounding plate at the rear on the right-hand side of the frame, with international grounding sticker on the frame, steps at the rear right on the underrun protection, at the rear on the right-hand side on the main beam, tread plate approx. 260 mm long and 300 mm wide. Axles + Suspension SAF disc brake axles, "axle / chassis laser-measured" reduces tire wear and fuel consumption, axle spacing offset 1410/1310 mm (combined transport), up to 44 tons total weight. Air suspension, 1st axle automatic lift axle, including forced lowering and starting aid, activation "3x brake" (starting aid is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h). Braking system 2-line compressed air braking system, color-coded line routing for easy servicing. Spring brake parking brake. 2 non-interchangeable coupling heads at the front, without connection line, EBS, electronic braking system with EBS socket at the front, without connection cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve, vehicle - driving stability system. Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be appropriately prepared, no truck installed. Wheels and tires 385/65 R22.5", manufacturer's choice, steel rims, factory silver. Nwodpfxey Tvphs Aqveg Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pole socket at the front, without connection cable. Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached while complying with the permissible axle / support and saddle loads. (Poor driving and handling behavior due to incorrect load distribution is possible). This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas" ("end-cross-member-load-transfer areas"). Country of registration / Signage Warning sign according to ECE - 70, approval according to ADR according to 9.1.1.2 of the ADR, EX/II, EX/III, / registration certificate for vehicles for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for sub

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902030382, empty load weight: 5,960 kg, maximum load weight: 29,040 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 03/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5, Year of construction: 2022, The images are archive images; the vehicle may still be in use. Fine-grain steel welded construction, kingpin plate with interchangeable 2" kingpin, outer frame slightly angled with "Load-Lock profile" for securing tie-down straps. Note: to attach the straps in conjunction with the side walls, the side walls must be opened! 24 tons. 2-speed landing gear, single-side operation, with straight lower part, without side-to-side load compensation, without supports, extension ladder at the rear, chocks with holder, pallet box for 32 Euro pallets. Loading height is reduced by approximately 15-20 mm. Axles + Suspension SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, air suspension, without lift axle. Braking System 2-line pneumatic braking system, color-coded lines for easy servicing. Spring brake parking brake. 2 fail-safe coupling heads at the front, without connecting line, EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable. Caution: the trailer may only be pulled by tractors that guarantee the effectiveness of the ABS! with raise and lower valve. Vehicle - driving stability system, brake pad wear indicator via EBS-CAN bus signal, for display on the display in the cab. The truck must be appropriately prepared for this. Axle load recognition via EBS-CAN bus signal, for display on the display in the cab. The truck must be appropriately prepared for this. No truck installation (no calibrated scale). Tire pressure monitoring system TPMS Haldex, via EBS, without truck installation (this must be available in the truck). Electrical System 24 volts, multi-chamber lights in LED with resistor, yellow LED lighting on the sides, license plate lighting in LED (Note: in certain tractors, false diagnoses may occur, although the function is given). 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin socket at the front, without connecting cable, additional LED work lights at the rear, switched via reversing light. Floor Sieve-printed panels approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg. Front Wall / Corner Posts at the Front 2,580 mm high, corner posts made of steel in full-volume design, release device for side tarpaulin on the front wall, "Crash-Blocker", at the bottom inside at approx. 140 mm height with steel ram protection. Intermediate Supports: 2 pairs of sliding supports, movable along the entire length, with 4-fold insertion pockets and a long pocket at the bottom. Number of support positions. Insertion Bars: 5 rows of aluminum V-insertion bars. Rear Wall / Corner Posts at the Rear Corner posts at the rear made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet. Nwsdpfxsy Tt Sys Aqvsg Rear portal doors, 2-leaf with 2 internal rotary latch locks each. Tarpaulin: Tarpaulin, with welded horizontal and vertical straps, tensioning fasteners made of stainless steel, single-colored tarpaulin according to desired color. Roof: Sliding tarpaulin, rear end lift foldable upwards, with tarpaulin that can be slid from back to front, L-roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, roof non-elastic, hardly any deflection of the roof beam during loading and unloading, anti-ice system, with 1 hose in the middle, with au

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2014, loading space length: 13,660 mm, loading space width: 2,470 mm, loading space height: 2,810 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 50 %, wheelbase: 9,000 mm, color: other, Year of construction: 2014, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes - Lift Axle = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 3: Max. axle load: 9000 kg; Tyre profile: 40% Weights Empty weight: 5.880 kg Carrying capacity: 33.120 kg GVW: 39.000 kg Maintenance Nedpsy Ulqdefx Aqvowg APK (MOT): tested until 03/2027 Identification Registration number: ON-68-FS

Condition: good (used), axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,650 mm, loading space width: 2,490 mm, loading space height: 3,010 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2023, Equipment: ABS, = Additional Options and Equipment = - EBS = Notes = Nwedpsy N Rnkofx Aqvjg Number of axles: 3, Unladen weight: 6,080 kg, Gross weight: 39,000 kg, Chassis type: Complete chassis, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Year of body construction: 2023, Side wall material: Tarpaulin, Customs cord, Sliding roof, Axle type: SAF = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread left: 5 mm; Tire tread right: 5 mm Axle 2: Tire tread left: 10 mm; Tire tread right: 10 mm Axle 3: Tire tread left: 4 mm; Tire tread right: 4 mm Weights Unladen weight: 6,080 kg Payload: 32,920 kg Gross vehicle weight: 39,000 kg Functional Load platform height: 95 cm Sliding roof: Yes Environment Emission class: Euro 0 Condition Technical condition: Good Optical condition: Good Damage: None = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, fast-changing stock • Recognizable quality • Good prices • Proper merchant business • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates are arranged quickly • Expert technical services • The safety of “recognizable quality” • And more… Please visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), CATALOG NUMBER 72133 TECHNICAL DATA - Maximum cutting height: 180 mm - Track width: 400 mm - Shaft width: 370 mm - Shaft diameter: 60 mm - Maximum blade diameter: 300 mm - Blade bore diameter: 80 mm - Minimum workpiece length: 630 mm - Maximum workpiece width: 600 mm From above: - Pneumatic hold-down - Pawls - 2 metal pressure rollers - Pawls - Saw shaft - Smooth pressure roller - Pawls - Smooth pressure roller From below: - 2 metal, toothed feed rollers - Pawls Nwodpfx Aqoyr Rmqovog - Track - Saw shaft - Track - Stepless feed speed adjustment via inverter - Main motors 2x55 kW - Feed motor 4 kW - Hydraulic lifting of the top/bottom frame - Hydraulic adjustment of saw shafts - Pump motor 0.37 kW - Central lubrication - Suction connector diameter: 1x300 mm, 1x380 mm - Dimensions (LxWxH): 3200x2350x2000 mm - Weight approx. 5500 kg ADVANTAGES – Italian manufacture – Double-shaft – Used multi-blade saw, in very good condition Net price: PLN 238,900 Net price: EUR 56,880 Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change with significant exchange rate fluctuations)

Condition: good (used), axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,100 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2023, Equipment: ABS, = Additional Options and Equipment = - EBS - Lifting roof = Notes = Number of axles: 3, unladen weight: 6,080 kg, gross weight: 39,000 kg, chassis type: complete chassis, chassis material: steel, kingpin size: 2 inch, suspension type: air suspension, ABS, EBS, body year: 2023, customs rope, lifting roof, sliding roof, axle type: SAF = Further Information = General Information Cab type: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; left tire tread: 3 mm; right tire tread: 2 mm Axle 2: left tire tread: 11 mm; right tire tread: 10 mm Axle 3: left tire tread: 11 mm; right tire tread: 10 mm Weights Unladen weight: 6,080 kg Payload: 32,920 kg Gross vehicle weight: 39,000 kg Functionality Sliding roof: Yes Environment Emission class: Euro 0 Condition Technical condition: good Visual condition: good Damage: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, model years, and price classes. Why buy at Kleyn Trucks? It’s simple! • Large and fast-changing stock Njdjy Iv Imspfx Aqvjwg • Recognizable quality • Good pricing • Reliable business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration plates arranged quickly • Skilled technical services • The security of recognizable quality • And more… Visit our website for special offers and our complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,5 EW20° 3GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Nodpsuayy Tofx Aqvswg Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc Nwedpfx Aqeuayy Hevjg T1SP 300x145x160 M 1,5 EW20° 3GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,25 EW20° 3GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Nwedpfeuayyysx Aqvsg Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M1 EW20° 2GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Nedpfsuayymox Aqvjwg Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33903000211, empty load weight: 7,707 kg, maximum load weight: 27,293 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2023, loading space length: 15,030 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 101 m³, total length: 15,350 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", Year of construction: 2023, The images are archive photos; the vehicle may still be in use! Vehicle consists of: Chassis: Semi-trailer for freight forwarding Fine-grained steel welded construction in lightweight design up to the support legs, fifth wheel plate with replaceable 2" king pin 24 t, 2-speed landing gear, single-sided operation, with a straight bottom section Rear extension ladder Side door holders 2 wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mudflaps Foldable mudguard for the lighting assembly Quarter mudguards Rear impact protection Curtain pole with holder 1 plastic toolbox Axles & Suspension 3 BPW disc brake axles "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air brake system Color-coded line layout for easy service Spring-loaded parking brake Duomatic coupling EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Nwodpfjy Snmpox Aqvsg With lift & lower valve Vehicle stability system AAC Basic, automatic lift axle acting on the rear axle as maneuvering aid, up to 20 km/h, manually switchable Axle load detection via EBS-CAN bus signal Wheels and tires 385/55 R22.5, make at manufacturer’s discretion Electrics 24 volts, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to the indicator, 'flashing side marker lights' 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable SB Hydraulics Hydraulic cylinder with sliding mechanism built into the floor. 2-circuit hydraulic system. Forward/reverse switching is electric via wired remote control. Hydraulic operation via truck PTO Hydraulic connection with hose at the front wall and HDK screw connection Recommended pump performance: Displacement: 110 l/min Pressure: 250 bar Minimum oil tank volume: 100 l Floor boards made of aluminum, 8 mm ribbed profile Aluminum box body from high-quality, wear-resistant material. Front and side walls made of aluminum hollow profiles, top all round welded with a wide special reinforcement profile from aluminum Sliding wall for improved unloading of cargo, with reinforced curtain flaps at the bottom. Rear wall made of aluminum hollow profiles, as two-leaf door, split 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 external locking bars, locked at the top and bottom. Rear wall with mechanical safety lock, operated at the rear on the left in the direction of travel. With swingable cross beam at the top. Standing platform with ladders on both sides 3 removable, swingable cross beams for tarpaulin support Roll tarp, can be stowed on one side, with 2 longitudinal tension straps, 3 side tensioning straps with ratchet Operating notices: Special permit required if overall train length exceeds 16,500 mm Country of registration / license plates: Germany With Dekra inspection and certificate (in accordance with §13 EC-FGV) Warning panel 'Long truck' Long truck overall assessment Driver instruction at the Triptis plant for up to 4 persons per truck combination Paintwork: Frame: DB 7350 Nova Grey Body: Natural aluminum Roll tarp: RAL 7035 light grey

Condition: used, functionality: limited functionality, machine/vehicle number: WFDFLT33901007921, empty load weight: 9,000 kg, maximum load weight: 26,000 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2018, next inspection (TÜV): 02/2027, loading space length: 15,150 mm, loading space width: 2,480 mm, total length: 15,350 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: black, Year of construction: 2018, Attention, the images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 26,000 / 30,000 kg Permissible/technical axle load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight approx.: 9,000 kg +/- build tolerance Overall length approx.: 13,850 + 1,500 mm Maximum overall width: 2,550 mm Overall height approx.: 3,200 mm Internal length approx.: 13,650 + 1,500 mm Neck length approx.: 4,050 mm Lower deck length approx.: 9,600 + 1,500 mm Internal width approx.: 2,480 mm Loading height, lower deck approx.: 900 mm Coupling height approx.: 1,150 mm Kingpin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis, semitrailer for forwarding operations Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Lashing rings recessed in outer frame, rated at 2.5 t each 24 t two-speed landing gear, single-sided operation, with straight base, without compensator Chocks with holders Aluminium side underrun protection Steel rear underrun protection Quarter-shell mudguards in front of first axle and behind each axle With anti-spray mud flaps behind each axle Rear impact guard Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm Document box at the front bulkhead Telescoping Central beam frame with neatly welded, interlocking telescopic frame components. Extensible by max. 1,500 mm and can be secured after approx. 1,500 mm; outer frame add-on sections approx. 1,500 mm long, for hooking into outer frame in telescoped state. Locking via mechanical pin system. Axles and Suspension SAF drum-braked axles Air suspension Braking System Dual-line compressed air brake system Nwodpfx Aqsy Slp Ievjg Spring-loaded parking brake Two fail-safe coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at front, without connecting cable Note: This trailer may only be towed by vehicles that can ensure effective ABS operation! With lift & lower valve Wheels and Tyres 235 / 75 R 17.5 Steel rims in twin arrangement, factory silver Electrics 24-volt, multi-chamber lights, yellow LED side marker lighting Two white position lights at front Two white/red lane position lights at rear 2 x 7-pin fail-safe sockets at the front, without connecting cables Rotating beacon with holder, operated via parking lights (beacon removable) Floor Approx. 30 mm thick phenolic ply boards, high point load capacity for forklift axle loads up to max. 7,100 kg Steel/chequer plate covering in wheel arch area where required Front bulkhead/corner posts 25 mm aluminium hollow section profile, 1,950 mm high, steel corner posts, full height for volume version Approval / Signs With Dekra inspection and certificate Prepared for single-line number plate holder Warning sign according to ECE - 70 Contour marking with reflective strips in accordance with ECE R 048, white on sides and red at rear Attention, the images shown are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33903000364, empty load weight: 6,120 kg, maximum load weight: 28,880 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2022, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,800 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: silver, Year of construction: 2022, Please note: The images are archive photos! The vehicle may still be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 28,880 / 32,880 kg Permissible/technical aggregate load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 6,120 kg +/- manufacturing tolerance Overall length approx.: 13,800 mm Maximum overall width: 2,550 mm Overall height approx.: 2,388 mm Gooseneck length approx.: 4,050 mm Low bed length approx.: 9,600 mm Loaded loading height in the low bed approx.: 900 mm Internal width approx.: 2,480 mm Coupling height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer Forwarder Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin Telescoping front low bed extendable by approx. 1,500 mm, lockable every 500 mm Slightly inclined outer frame, new design with 'Load-Lock profile' for attaching lashing straps 'Patented Load-Lock-Cross' for lashing straps integrated in the cross member under the outer frame 24 t, 2-speed landing gear, single-sided operation, with straight lower part, without compensating support Free landing gear corner dimension and rear swing clearance approx. 1,920 mm Aluminum side underrun protection Steel rear underrun protection Quarter-shell mudguards 9 pairs of lashing/rack rails transverse in the floor, embedded up to the main frame, approx. 100 mm high. With 20 mm round steel rails, top and bottom, distance between upper and lower rails approx. 60 mm (of the round steel). Bottom has angle plate, half open downward. For lashing and inserting stakes 80 x 80 mm (3 pairs in the neck, 6 pairs in the low bed section). 3 pairs of stake pockets recessed in the outer frame, approx. 72 x 42 mm internal dimension Axles & Suspension Drum brake axles according to manufacturer specification 'Axle/chassis laser-aligned' – reduces tire wear and fuel consumption Air suspension Brake System 2-line compressed air braking system Color-coded lines for easy service Spring-loaded parking brake 2 error-proof coupling heads at front, without connecting line EBS, Electronic Braking System with EBS socket at front, without connection cable Note: The trailer may only be towed by tractors with functional ABS! With raise & lower valve Vehicle driving stability system Wheels and Tires 235/75 R17.5, manufacturer at discretion Steel rims, factory silver Nwedpfxsy Slhqs Aqvjg Electrical System 24V, multi-chamber lights, side-mounted yellow LED lighting (recessed) 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin error-proof sockets at front, without connecting cable 1 additional LED work light at rear, operated via reverse light Floor Anti-slip phenolic plywood panels, approx. 30 mm thick, high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Front wall / Corner stakes front 25 mm aluminum hollow profile, 1,350 mm high Country of registration / license plates Germany Inspection and certification in Bosnia 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides, red at rear Warning sign according to ECE - 70 Paintwork Frame: Hot-dip galvanized including passivation '15-year warranty against rust-through' Front corner stakes: Hot-dip galvanized Front wall: Aluminum

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22701003408, empty load weight: 4,800 kg, maximum load weight: 22,200 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 01/2015, next inspection (TÜV): 02/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Year of construction: 2014, Attention: The images shown are archive photos! The vehicle may still be in use! Weights and Dimensions: Gross weight: 27,000 kg Payload approx.: 22,200 kg Aggregate load: 16,000 kg Stated fifth wheel load: 11,000 kg Unladen weight approx.: 4,800 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm Kingpin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Skeletal trailer for freight forwarding Fine grain steel welded construction, fifth wheel plate with replaceable 2" kingpin 13 pairs of lashing rings recessed in the outer frame, each rated at 2.5 t Outer frame features "Load Lock Profile" for attaching lashing straps 24 t two-speed landing gear, single-sided operation, with straight lower section, without compensator Wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection Quarter fender mudguards Axles & Suspension 1st axle: SAF drum brake, 2nd axle: BPW drum brake Air suspension Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connection cable Note: This trailer may only be towed by tractors that ensure the effectiveness of the ABS! With lift & lower valve Vehicle Stability Control System Wheels and Tyres 385/55 R19.5, manufacturer at OEM's discretion Steel rims, factory silver Electrics Nedpfey Sk U Asx Aqvjwg 24 Volt, multi-chamber lights, side mounted yellow LED lighting set as far in-board as possible 2 white marker lights at the front 2 white/red lane position lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Floor Phenolic resin-coated plywood approx. 30 mm thick, cross-joints with Omega inlay, on longitudinal bearers for high point load capacity for forklift axle weight up to max. 7,100 kg Note: Floor deformation due to weather influences possible! Front Bulkhead/Corner Posts Bulkhead height: 1,200 mm, corner posts made of steel in volume design, with "viewing windows" Approval / Signs Country of registration: Germany With DEKRA inspection and report 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE-70 Contour marking with reflective strips in accordance with ECE R 048, white on the sides, red at the rear Painting Frame: RAL 3002 Carmine Red Landing legs: black coated Front bulkhead: RAL 3002 Carmine Red Attention: The images shown are archive photos! The vehicle may still be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22702011668, empty load weight: 4,800 kg, maximum load weight: 22,200 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 10/2013, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Year of construction: 2013, Attention, the images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Gross weight: 27,000 kg Payload approx.: 22,200 kg Aggregate weight: 16,000 kg Stated fifth wheel load: 11,000 kg Tare weight approx.: 4,800 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Coupling height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis - Semitrailer for Forwarding High-tensile steel welded construction, fifth wheel plate with replaceable 2" king pin 13 pairs of lashing rings recessed into the outer frame, each with a 2.5-ton capacity Outer frame with "Load-Lock profile" for lashing strap attachment 24-ton twin-speed landing gear, single-sided operation, straight lower part, without compensating link Wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, galvanized steel Quarter-shell mudguards Axles & Suspension BPW disc brake axles Air suspension Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable couplings at the front, without connecting line EBS, Electronic Brake System with EBS socket at front, no connecting cable Caution: This trailer may only be towed by towing vehicles that ensure effective ABS operation! With lift/lower valve Vehicle stability control system Wheels and Tyres 385/55 R19.5" make at manufacturer's discretion Steel rims, factory silver Electrics 24 volt, multi-chamber tail lights Side yellow LED lighting as deeply recessed as possible 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cables Floor Anti-slip phenolic plywood, approx. 30 mm thick, cross joints with Omega inserts, on longitudinal supports for high point load resistance (for forklift axle load up to max. 7,100 kg) Note: Floor warping due to weather influences possible! Front Bulkhead / Corner Stakes 25 mm aluminium hollow profile, approx. 1,200 mm high, steel corner stakes in volume design, with 2 "inspection windows" Approval / Signs Country of Registration: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for single-line license plate holder Nwedpfx Aqsy Sk Szovsg Warning panel according to ECE-70 Contour marking with reflective tape in accordance with ECE R 048, white on sides, red at rear Paintwork Frame: RAL 3002 carmine red Landing gear: Black coated Front wall: RAL 3002 carmine red Attention, the images shown are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22701003406, empty load weight: 4,800 kg, maximum load weight: 22,200 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 10/2013, next inspection (TÜV): 01/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Year of construction: 2013, Attention: The images are archive photos! The vehicle may currently be in use! Weights and Dimensions: Gross vehicle weight: 27,000 kg Payload approx.: 22,200 kg Axle load: 16,000 kg Stated fifth wheel load: 11,000 kg Unladen weight approx.: 4,800 kg +/- build tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer Forwarder Fine-grain steel welded construction, mounting plate with replaceable 2" king pin 13 pairs of lashing rings recessed in outer frame, each rated 2.5 t Outer frame with “Load-Lock profile” for securing straps 24 t two-speed landing gear, single side operation, with flat base plate, without compensating slide Chocks with holder Aluminum side underrun protection Steel rear underrun protection Quarter-shell mudguards Document box on front wall, left-hand side (mounted slightly sloped) Axles & Suspension BPW disc brake axles Air suspension Braking System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, no connecting line EBS, Electronic Braking System, with EBS socket at front, without connecting cable Attention: The trailer may only be towed by tractor units equipped with functional ABS! With lift and lower valve Vehicle Stability Control System Wheels and Tyres 385/55 R19.5” – make at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt; multicompartment rear lights (3 sets of older Hella lights still available at plant for optional installation); lateral yellow LED markers recessed as far as possible 2 white front position lamps, each protected by 12 mm round bar welded over the top 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cables Floor Approximately 30 mm phenolic plywood, cross joints with Omega insert, laid on longitudinal supports for high point-load capacity, suitable for forklift axle load up to max. 7,100 kg Note: Floor warping due to weather exposure possible! Front bulkhead / Corner posts Approx. 1,200 mm high, corner posts made of volumetric steel Approval / Plates Nwedpfx Aqjy Sk Rqsveg Country of registration: Germany With Dekra inspection and report 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE-70 Contour marking with reflective strips in accordance with ECE R 048, white (sides) and red (rear) Paintwork Chassis: RAL 3002 carmine red Landing legs: Black coated Front bulkhead: RAL 3002 carmine red Attention: The images are archive photos! The vehicle may currently be in use!

Condition: used, axle configuration: 3 axles, total width: 25,500 mm, total height: 35,000 mm, Year of construction: 2018, Equipment: ABS, = Further options and accessories = - Air suspension rear - Air suspension front = Remarks = For inquiries about the vehicle, Mr. Seidel will be happy to assist you (by phone). Fliegl DTS 300 low loader trailer BPW axles, drum brakes, spring loaded brakes, mechanical ramps, permissible total weight: 24,000 kg, unladen weight: 6,350 kg, payload: 17,650 kg, loading area dimensions: L 8,490 mm x W 2,510 mm, tire profile: 1st axle 7-12 mm, 2nd axle 7-8 mm, 3rd axle 4-7 mm If required, we can provide you with a leasing or financing offer. Mr. Seidel (phone) will be happy to assist you. Further information is available on our website. Njdpfxoy Svrge Aqvewg ... Errors, changes, and prior sale excepted!!! = Further information = Unladen weight: 6,350 kg Payload: 17,650 kg Gross vehicle weight: 24,000 kg Please contact Tobias Ebert for further information.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22702018968, empty load weight: 4,000 kg, maximum load weight: 23,000 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 02/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Year of construction: 2016, The images shown are archive photos! The vehicle may currently be in use! 2-axle flatbed semi-trailer Type SZS 270 Mega RH 95 Weights and Dimensions: Perm. / technical gross weight: 27,000 kg Perm. / technical payload approx.: 23,000 kg Perm. / technical axle load: 16,000 kg Perm. / technical fifth wheel load: 11,000 kg Unladen weight approx.: 4,000 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Maximum overall width: 2,550 mm Overall height approx.: 2,220 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation measurement approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Vehicle consists of: Chassis: Spedition semi-trailer frame Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame with "Load-Lock profile" for lashing strap attachment, note: to attach straps when side walls are fitted, the side walls must be opened! 14 pairs of lashing rings, each rated to 2.5 t 24-t, 2-speed landing gear, operated from one side, with straight base, without equalizer Without support legs Wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards Axles & Suspension: SAF disc brake axles Air suspension Braking system: 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket front, without connection cable Attention: The trailer may only be towed by tractors capable of ensuring the ABS functions correctly! With raise & lower valve Vehicle stability system Wheels and Tyres: 385/55 R19.5” – make according to manufacturer’s choice Steel rims, factory silver Electrics: 24 Volt, multi-chamber tail lights, amber LED side marker lamps 2 white position lights at the front with protective bar 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at front, without connection cable Floor: Anti-slip phenolic plywood floor approx. 30 mm thick, cross joints with Omega insert, on longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Note: Floor warping due to weather influences possible! Front bulkhead/corner posts: 25 mm aluminium hollow profile, approx. 1,350 mm high, corner posts made of steel, high volume design, with “holes” for forklift drivers Approval / Markings: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for one-line license plate holder Warning sign according to ECE-70 Conspicuity markings with reflective tape according to ECE R 048; side in white, rear in red Painting: Frame: RAL 3002 carmine red Landing gear: Black coated Nwsdpfx Ajy Rxmwoqvsg The images shown are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902037031, empty load weight: 4,795 kg, overall weight: 35,000 kg, axle configuration: > 3 axles, first registration: 09/2025, next inspection (TÜV): 08/2026, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,040 mm, suspension: air, color: grey, Year of construction: 2025, These images are archive images! The vehicle may still be in use! Fine-grain steel welded construction, in basic lightweight design, kingpin plate with replaceable 2" kingpin, Curved front end "Patented" 24-ton, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Support wedges with holder Underrun protection, foldable Half-shell fenders Integrated "fender holder," surface resistant to stone chipping with anti-splash flaps only on the last axle Tarpaulin rod with holder Towing hook at the rear (not on Revolution model) Axles + Suspension SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assistance, activated by "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) "Hot-dip galvanized lift axle mechanism" Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Automatic tilting lowering with shut-off valve "TPMS" tire pressure monitoring system - display on the tractor unit, via EBS, without truck installation (the truck must have the necessary prerequisites. Only on base tires). Wheels and tires 385/65 R22.5" Steel rims Electrical system 24 volts, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED (Note! with certain tractor units, false diagnoses may occur, although the function is given) Yellow LED lighting on the sides linked to the turn signal "flashing side lights" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED Nedpfxjy Rrplj Aqvjwg 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, without connecting cable Additional LED work light, integrated and recessed at the rear, switched via reversing light Hydraulics Low-pressure cylinder max. 170 bar Operation hydraulically via truck auxiliary drive Bins Aluminum box body made of high-quality, abrasion-resistant material. Sloping front wall, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, cleanly welded, with top rail profile that prevents spillage. Inside with access ladder on the front wall (not in conjunction with Cramaro). Shovel and broom holder outside on the front wall. Greenline - conical and aerodynamic bin shape "Membrane" - rear wall Rear wall as a hinged flap with "double-hinge hinge," externally mounted with double hook lock. Rear wall with rubber seal Floor continuous, 6 mm thick Standing platform with access ladder, connecting plate for air/electrical and brake connections with large clearance for optimal operability. Roll tarp, can be folded to the right side, with central locking on the left side Operating instructions For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod, so that it is not attacked and rusted by the material.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031191, empty load weight: 4,900 kg, overall weight: 35,000 kg, axle configuration: > 3 axles, first registration: 08/2024, next inspection (TÜV): 09/2026, loading space length: 9,300 mm, loading space width: 2,420 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, tire size: 385/65 R 22,5*, color: grey, Year of construction: 2024, The images shown are archive photos. The vehicle may still be in use! Chassis: Semi-trailer tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2'' kingpin Patented curved front panel 24-ton 2-speed landing gear, single-side operation, with straight base, with lateral compensation 2x wheel chocks with holders Side underrun protection: aluminium Rear underrun protection, foldable 6x half-shell mudguards Integrated "mudguard holder" with stone-repellent surface 2x with anti-spray flaps (only on the last axle) Axles & Suspension 3x SAF disc brake axles Axles in off-road specification "Axles/chassis laser aligned" – reduces tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and traction aid, activated by "braking 3x". (Traction aid functional up to 30% axle overload and up to a max speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" – 10-year warranty against corrosion Braking System 2-line compressed air braking system Coloured line routing for easy servicing Spring-actuated parking brake 2 fail-safe coupling heads at the front, without connecting line EBS by Haldex, electronic braking system with EBS socket at the front (without connection cable) Note: The trailer may only be towed by towing vehicles that ensure proper ABS function! With raise & lower valve Vehicle stability system Nwjdpfx Aoy Rl Unoqvjg Wheels and Tires 6x 385/65 R22.5", manufacturer’s choice 6x steel rims, manufacturer’s choice Electrics 24 volt, multi-chamber lights, side-mounted yellow LED lighting 2 white front position lights 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed part, nominal width 48 mm. (without hose connection) Actuation hydraulically via truck PTO Body / Tip Body Aluminium box body, high-quality abrasion-resistant material Sloped front wall, 5 mm thick, with external cylinder mount Side walls made of 30-mm hollow-chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Internal access on front wall (not in combination with Cramaro). Shovel and broom holder on outside of front wall Greenline – conical, aerodynamic box shape "Membrane" tailgate Tailgate: pendulum door with double-joint hinge, externally mounted, double hook lock Tailgate with rubber seal Note: Heat-resistant up to 170°C max! Floor: continuous 5 mm, Brinell 110 Note: Only suitable for transporting sand, chippings and gravel, max grain up to 20 mm! All other goods excluded from warranty! Operating Notes For transport of salt, lime, etc., we recommend a tipping cylinder with hard chrome-plated piston rod to avoid corrosion and pitting. The stated gross weight is technically feasible; depending on load, the actual gross weight may not be achievable within the legal axle, support, and fifth-wheel loads. (Improper load distribution may impair driving and tracking behavior) Paint Finish Frame: DB 7350 Novagrey "10-year warranty against corrosion" Landing gear: black coated Body: natural aluminium Roller tarp: RAL 7035 light grey

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031190, empty load weight: 4,900 kg, overall weight: 35,000 kg, axle configuration: > 3 axles, first registration: 08/2023, next inspection (TÜV): 03/2027, loading space length: 9,300 mm, loading space width: 9,300 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, tire size: 385/65 R22,5, color: grey, Year of construction: 2021, The images are archive photos. The vehicle may still be in use! Chassis Semi-Tipper Fine-grain steel welded construction, lightweight design, fifth wheel with replaceable 2" kingpin Curved front panel "Patented" 24 t, 2-speed landing gear, single-sided operation, with straight lower part, without sliding compensation 2x wheel chocks with holder Side underrun protection made of aluminum Underride guard, foldable 6x half-shell mudguards Integrated "mudguard holder" surface repels stones 2x anti-spray mud flaps on the last axle only 2x tow hooks at rear Axles & Suspension SAF disc brake axles Axles in off-road design "Laser-measured axle/chassis" reduces tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and start aid, operated by "braking 3x" (start aid functions up to 30% axle overload and maximum speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" with 10 years’ warranty against corrosion Brake System 2-line compressed air brake system Color-coded tubing for easy servicing Spring-loaded parking brake 2 foolproof coupling heads at the front, without connection line EBS by Haldex, electronic braking system with EBS socket at the front, without connection cable Note: The trailer must only be towed by vehicles that guarantee ABS functionality! Including raise/lower valve Vehicle stability control system Wheels and Tyres 6x 385/65 R22.5" tyres, brand at manufacturer’s discretion Nwodoy Rlvrjpfx Aqveg 6x steel rims, brand at manufacturer’s discretion Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin foolproof sockets at the front, without connection cables Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body (Tipper) Aluminum box-type body made of high-quality, wear-resistant material Inclined front wall 5 mm thick, with external cylinder mount Side walls made of 30 mm hollow chamber profiles, fully welded, with bulk-material-repelling top rail profile. Inside with access steps on front wall (not available with Cramaro configuration) Shovel and broom holder outside on front wall Greenline – conical and aerodynamic body shape "Membrane" tailgate Tailgate as swinging flap with "double joint hinge", externally mounted with dual hook locking mechanism Tailgate with rubber seal Floor throughout 5 mm thick, Brinell 110 Note: Only suitable for transporting sand, gravel, and pebbles with a maximum grain size of up to 20 mm! All other goods are excluded from warranty! Roll tarpaulin can be stowed on right-hand side, with central lock on left-hand side Operating Notes For transport of salt, lime, etc., we recommend a tipping cylinder with hard-chromed piston rod to prevent corrosion by materials The stated gross weight is technically possible; depending on the load, the gross weight may not be achievable within axle/support/saddle load limits. (Poor driving and trailing behavior may result from incorrect load distribution) Paint finish

Condition: used, maximum load weight: 30,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2021, next inspection (TÜV): 01/2027, loading space length: 7,200 mm, loading space width: 2,450 mm, loading space height: 1,550 mm, loading space volume: 27 m³, total width: 2,550 mm, total height: 3,400 mm, Year of construction: 2020, Equipment: ABS, * HYVA hydraulic system with low-pressure cylinder * Automatic lowering with shut-off valve * Vehicle stability system * CRAMARO electric sliding tarpaulin cover * 1st axle automatic with forced lowering and starting aid ----* Tire Pressure Monitoring System (TPMS) * SAF axles with disc brakes * HALDEX COLAS & TEM * HALDEX braking system with EBS-E ----* LED lights * Alcoa LM rims * Dual hook lock ----* Tire dimension: 385/65R22.5 Njdpfx Asy Srihjqvswg * Technical gross weight: 38,000 kg * Unladen weight: 4,200 kg * Total length: 8,450 mm * SP inspection due: 06/2026 ----Vehicle number: 12076 ----Errors and prior sale excepted ----Advertising and various lettering have been digitally removed. -----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your requests and suggestions, and we will take care of them. Among other services, we can offer you the following for an additional charge: ----Trade-in of your old vehicle TÜV/SP inspection Complete export processing Financing arrangement Application for export license plates Vehicle transport Vehicle registration Vehicle recovery and transport ----Your VTS Team

Condition: good (used), axle configuration: 3 axles, first registration: 03/2021, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,010 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,100 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS - Lifting roof = Notes = Number of axles: 3, Unladen weight: 6,015 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Year of body construction: 2021, Lifting roof, Sliding roof, Axle type: SAF = Further Information = General Information Cabin: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tire size: 435/50R19.5 Nwsdpfx Aqey Hcnqovsg Brakes: Disc brakes Suspension: Air suspension Axle 1: Left tire tread: 5 mm; Right tire tread: 5 mm Axle 2: Twin tires; Left outer tire tread: 9 mm; Right inner tire tread: 9 mm Axle 3: Left tire tread: 6 mm; Right tire tread: 4 mm Weights Curb weight: 6,015 kg Payload: 32,985 kg GVW: 39,000 kg Functional Sliding roof: Yes Environment Emission class: Euro 0 Condition Technical condition: good Visual condition: good Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our inventory includes all European brands, years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognized quality • Competitive pricing • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) plates can be arranged quickly • Professional technical services • The safety of 'recognized quality' • And more.... Please visit our website for special offers and the complete inventory. Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry through our website. Ask directly about our European warranty package.

Condition: good (used), axle configuration: 3 axles, first registration: 03/2022, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,100 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2022, Equipment: ABS, = Additional Options and Accessories = - EBS - Lifting roof = Remarks = Number of axles: 3, Curb weight: 6,080 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inches, Suspension type: Air suspension, ABS, EBS, Superstructure year: 2022, Lifting roof, Sliding roof, Axle type: SAF = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tire size: 435/50R19.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread left: 10 mm; Tire tread right: 11 mm Axle 2: Tire tread left: 10 mm; Tire tread right: 10 mm Axle 3: Tire tread left: 10 mm; Tire tread right: 10 mm Weights Unladen weight: 6,080 kg Payload: 32,920 kg Gross vehicle weight: 39,000 kg Functional Sliding roof: Yes Environment Emission class: Euro 0 Condition Technical condition: Good Optical condition: Good Damage: None = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly updated stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European brands across all model years and price classes. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Competitive prices • Reliable business conduct Nwjdpjy Hcnkofx Aqvsg • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And more.... Please visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask directly about our European warranty package.