Used Emcomat 14 for sale (9,696)

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital display, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE compliant!! Bedpfx Aexyvaqsktjlp Technical specifications: Year of manufacture: 2006 Model: EMCO EMCOMAT 14 D Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MT 2 Quill stroke: 80 mm Dimensions Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe for the highest demands: with stepless speed control, constant cutting speed and an impressive 7.5 kW drive power (40% duty cycle). This compact machine with outstanding performance is ideal wherever maximum precision is required in limited spaces, such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is an EMCO EMCOMAT 14 D lathe with Emco digital display, year of manufacture 2006. This lathe is in excellent original condition and comes from a facility where it was only used occasionally for special applications. The control system is very user-friendly. The guideways are lubricated regularly by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power at our premises. You will find more lathes from renowned manufacturers on our website.

Condition: used, Year of construction: 2008, turning diameter over bed 280 mm turning diameter over slide rest 170 mm turning length 650 mm center height over bed 140 mm centre distance 650 mm bed width 155 mm spindle taper KK 4 CAMLOCK DIN 55029 spindle bore 40 mm Bjdjz Abwyjpfx Aktslp turning speed range - stepless 4.000 U/min 4-jaw-chuck diameter 140 mm quick change toolholder MULTIFIX Typ A drive capacity - spindle motor 7,5 kW taper in tailstock-quill MK 2 dia. of quill 30 mm quill stroke 80 mm voltage 400 V total power requirement 7,5 kW weight of the machine ca. 400 kg dimensions of the machine ca. 1,30 x 0,70 x 1,60 m - Serial-No.: C7D W13 02 - 3-axis digital display - Stepless speed adjustment - Digital speed display - MULTIFIX quick-change tool holder

Condition: excellent (used), Year of construction: 2009, Control: Emco Easycycle Working Area Travel in X: 450 mm Travel in Y: 400 mm Travel in Z: 350 mm Table Clamping area (L x W): 800 x 400 mm Max. table load: 300 kg Spindle Speed range (stepless): 10 – 5,000 rpm Distance to table surface: 40 – 440 mm Tool holder: SK 40 Quill stroke: 80 mm Swiveling vertical milling head: +/- 90° Feed Feed range: 10 – 5,000 mm/min Rapid traverse X/Y/Z-axis: 2,000 / 5,000 mm/min Bodpfx Akoyvrkastslp Feed force X/Y/Z: 10 / 10 / 15 kN Dimensions Dimensions (L x W x H): 1,980 x 2,030 x 1,990 mm Machine weight: 2,270 kg

Condition: used, functionality: fully functional, machine/vehicle number: 04310, Year of construction: 1991, operating hours: 18,226 h, load capacity: 6,000 kg, fuel type: diesel, overall weight: 12,050 kg, Kalmar side loaders with double mast. Bedpfx Akezc Upketslp Load capacity up to 6000 kg.

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 353 mm, Tested forklift battery for your truck – 48V 3PZS 465Ah – DIN B + 1-year warranty + Includes aquamatic system + Includes end cell connectors & REMA 320 connector (other types available on request) + Capacity: minimum 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,035 mm Width: 353 mm Height: 784 mm Weight: approx. 770 kg Suitable for the following models and more: Blsdjy Rnlcjpfx Aktsp Linde A (1120) - 5022-00 Linde E 15 C - 322-00 Linde E 18 Z - 322-00 Linde R 10 BN - 1120-00 Linde R 10 CN - 1120-00 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - frontal changeover Linde R 12 BN - 1120-00 Linde R 12 CN - 1120-00 Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - frontal changeover Linde R 12 N - 136-00 Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 CN - 1120-00 Linde R 14 N - 1120-00 Linde R 14 N - 1120-00 - frontal changeover Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 16 AS 1140 - 1120-00 Linde R 16 CN - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - frontal changeover Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N HD - 1120-00 - frontal changeover Linde R 16 SN - 115-08 Linde R 16 SN - 115-12 Linde R 20 - 1120-00 Linde R 20 W - 1120-00 Linde V - 5213-00 Linde V 10 E - 146-00 Linde V MODULAR - 5213-00 Crown ESR 5220-1.4 Still FM 14 N Jungheinrich ET 110 Jungheinrich ET 112 Jungheinrich ETV Jungheinrich ETV 110 Jungheinrich ETV 112 Jungheinrich ETV 214 Jungheinrich ETV Q TCM RTL140 Common battery sizes available – please inquire. Transport can be arranged.

Condition: excellent (used), 1 x stainless steel 14 head multihead Screw weigher complete with twin incline feed conveyor and exit conveyor. IP65 rated. Dimple pans for sticky and awkward products. Model TY-P14 Blsdpfx Aksz Ak I Ujtsp

Condition: used, Year of construction: 2023, Manufacturer: Ilapak Italia S.p.A. (IMA Group) Year: 2023 Type: Complete bagging line LINE-UP Bjdpfx Aks Ahkz Hotolp 1. Belt conveyor – Service PTNMSX 2. Z-type lift with cleats – Service PTNMSX-Z 3. 14-head combination weigher – Ilapak Weightronic WA 14/50 4. Vertical form-fill-seal (VFFS) bagging machine – Ilapak Vegatronic VT2000 OF P 5. Stainless steel platform (gantry) – FQS Maximum line dimensions: 4.81 x 3.00 x 7.35 m (H) (technical data sheet) Designed for use in cold/damp environments (deep-frozen products) 1. VEGATRONIC VT2000 OF P VERTICAL BAGGING MACHINE Vertical form-fill-seal (VFFS) bagging machine, Open Frame version Forming tube and neck Vertical longitudinal seal Horizontal cross-seal jaws with integrated cutting blade Film drive via belts Bag length controlled by encoder Maximum mechanical output: 70 bags/min Film reel: Max. Ø: 600 mm Width: 400 mm Core: Ø 76 mm Max. weight: 50 kg Current format: Ø 170 mm (can be changed on request) HMI touch-screen control 2. WEIGHTRONIC WA 14/50 MULTIHEAD WEIGHING MACHINE 14 heads – 1 pre-dosing basket + 1 weighing basket per head 15 load cells: 14 weighing baskets + 1 beneath the central cone Central distribution cone Electromagnetic radial vibrating channels, which can be dismantled without tools Ouverture des paniers par moteurs pas à pas – cames paramétrables Timing hopper Unloading via 4 removable chutes into the outlet hopper Maximum speed: 90 strokes per minute Bucket capacity: 5.0 l Volume maximal de vidange (par déversement) : 12,5 l Plage de poids de vidange (par déversement) : 100 g - 3 000 g Maximum length of parts: 150 mm Modes: weighing or piece counting, mixing of up to 4 batches, multiple discharge per bag Automatic tare and calibration Ilapak HMI touchscreen Control of up to 4 external feeders Contact parts that can be removed without tools and are numbered per head AXIS F1035-E surveillance camera above the weighing machine – real-time display on the HMI (augmented reality mode) 3. PRODUCT POWER SUPPLY ( SERVICE) PTNMSX belt conveyor: - AISI 304 stainless steel frame - Modular PP belt - Effective width: 533 mm - Effective length: 2405 mm - Loading/unloading height: 3080 mm - Speed: 22 m/min - SEW SA37 gear motor – 0.37 kW – IP65 - Power supply: 400 V three-phase – 50 Hz - Wash ramp with 10 nozzles PTNMSX-Z Z-lift: - AISI 304 stainless steel structure - Modular PP belt with cleats – pitch 203.2 mm - Effective width: 403 mm - Effective length: 5,300 mm - Loading height: 2,660 mm - Unloading height: 5,215 mm - Speed: 24 m/min - SEW SA47 gear motor – 0.75 kW - Power supply: 400 V three-phase – 50 Hz - Stainless steel loading hopper - Inspection hatches Conveyor control via the bagging machine control cabinet 4. FQS GANTRY PLATFORM Stainless steel tubular structure designed for washing Weighing machine support above the bagging machine Staircase with stringers and steps made of folded sheet metal Stainless steel handrails Bolted assembly (dismantlable) DOCUMENTATION AVAILABLE EC Declarations (production lines and machinery) Declarations of incorporation for conveyors User manuals (FR / IT) Risk assessments (FR) Electrical and pneumatic diagrams Illustrated parts lists (IPB) Recommended spare parts lists (RSPL) Food contact certificates Equipment dismantled and stored on Osertech's premises.

Condition: like new (used), functionality: fully functional, Year of construction: 2021, load capacity: 1,400 kg, working height: 8,860 mm, operating hours: 290 h, Equipment: documentation/manual, STILL FM – X 14. Reach Truck – 2 pcs. Forklift For sale: Reach trucks, condition like new, only 350 engine hours, year of manufacture 2021. Serviced exclusively by STILL. Detailed description see photo. • Quantity: The offer is for 2 units of STILL FM – X 14 forklifts. • Batteries: Attention, 2 batteries are included for each forklift (4 batteries in total) – ideal for multi-shift operations! • Hydraulic telescopic forks extendable from 80 cm to 120 cm!! Bedpfx Ajuvdbujktolp • Load capacity: 1400 kg Price: €19,900 Top condition, serviced exclusively at STILL !!! STILL FM – X 14. Reach Truck. x 2 pcs.Load capacity: 1400 kgPrice: €15,900Attention: The price includes 2 batteries, making it suitable for multi-shift operations!Detailed Description:Hydraulic telescopic forks: extendable from 80 cm to 120 cm!!Vehicle width: 1,302 mmLoad wheel tires: Diameter 285 mm, polyurethaneDrive wheel tire: Diameter 360 mm, polyurethaneBattery change: Side battery replacement via changeover rack, battery also transportable by craneMast functions: Hydraulic mast reach cross-shift +/- 50 mm, with mast tilt, including necessary hydraulics (4 functions)Fork carriage: Type A, 4 rollers, width of fork carriage: top 840 mm, bottom 755 mmOverall height: 3,300 mmFree lift (H2): 2,740 mmRated lift: 8,300 mmMaximum height (h4): 8,860 mmLoad capacity at maximum lift: 1,350 kgLift height sensor: LED height sensor – preparation for innovative lift height measurement using an LED light beam for precise measurement of optional assistance functionsForks: 1150 x 100 x 40 mm, 2A, LSP 600Hydraulic system: Central position of fork tilt/mast and sideshift selectable via buttonsTilt angle: 0.5/2 degrees forward/backward mast tiltTransport: Mast disassembled before shipping for easier transportOverhead guard: Driver's overhead guard with head paddingOverhead guard dimensions (short version): Overall height: 2200 mm, depth: 645 mmAdditional roof equipment: Overhead guard pillar for mounting MMS terminals or similar auxiliary equipmentInterior rearview mirror: Panoramic mirror on the drive side mounted on the overhead guard for improved visibility when driving out of rack aislesDisplay: Remaining battery charge indicator integrated into the displayDriver's seat: Hydraulically suspended comfort driver's seat MSG 65 with fabric coverSeat adjustments: Infinitely variable weight adjustment, backrest tilt, longitudinal adjustment, and lumbar supportHydraulic control: Joystick 4Plus (central control element combines lift, tilt, and auxiliary hydraulic functions, including horn)Drive activation: Designed as a foot and seat switch combined with single-pedal control and travel direction change via rocker switchSteering: Fully electric 360° steering, height-adjustable steering wheelIgnition switch: Start/Stop buttonAdditional electrical equipment: For external systems (data terminal and scanner) consisting of:Assistance system: Infinitely variable speed reduction depending on the steering angle (CSC - curve speed control)Warning device: STILL SafetyLight 4PLUS with 4 LEDs and a moving light spot in the direction of travel to show the vehicle's approach directionFleet Manager 4.0: Online fleet management via WEB application (GPRS - SIM card, access via employee cards, data, reports. Batteries: 2 pcs 48 V / 4PzS 620 Ah Charging station / garage + pallet jack + roller conveyors for battery replacement free of charge when purchasing both units for FMX and likewise free of charge for RX.

Year of construction: 2019, condition: like new (used), functionality: fully functional, DESI-14 Complete Industrial Grinding & Micronization Line – 80 kW – 2019 Manufacturer: Desintegraator Tootmise OÜ, Estonia Model: DESI-14 Year: 2019 Condition: Used – Excellent condition, fully operational Location: Zagreb, Croatia DESCRIPTION For sale: a complete DESI-14 industrial grinding and micronization system, manufactured by Desintegraator Tootmise OÜ, Estonia. Bodpfszy Nbhex Aktolp The DESI-14 uses high-speed impact technology for efficient size reduction and fine grinding of various industrial materials. APPLICATIONS: Food industry: milk powder, casein, gelatin, grains Chemical industry: polymers, resins, catalysts, reagents, melamine, pigments Mineral industry: calcium carbonate, mineral fillers, lime, fertilizers, salts, ores Agricultural and biological materials: soybean, wood sawdust, bark, chopped straw DOCUMENTED PERFORMANCE Factory test with calcium carbonate (CaCO₃): Throughput: 1,000 kg/h 92% of particles below 30 μm Feed moisture: 2% TECHNICAL DATA Total installed power: 80 kW Main drives: 2 × 30 kW Rotor speed: approx. 2,965 rpm Rotor configuration: 6 rows Feed hopper: 1.5 m³ Maximum airflow: 1,000 m³/h Power supply: 380 V / 50 Hz Cooling: Water-cooled grinding chamber COMPLETE SYSTEM INCLUDES DESI-14 disintegrator Two complete rotor sets Feeding hopper and WAM screw feeder Cyclone separators Rotary valves and screw conveyors WAMFLO filtration system Exhaust fan Big-bag discharge system Electrical control panel Supporting steel structures and connecting ducts ADVANTAGES Complete industrial processing line Versatile material applications Documented high-capacity grinding performance Suitable for various industrial powder-processing applications Excellent condition and immediately available. Inspection can be arranged by appointment. Contact us for price, further technical details and inspection. Further technical information, photographs and inspection arrangements are available upon request. Location: Zagreb, Croatia Availability: Immediately available

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system >> Bed stop Blsdpfx Akewag Stetop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Emcomat 17D, lead screw and pull spindle lathe, manufactured in 2013, from a vocational training workshop, CE compliant, in excellent condition!!! Bsdpfo Afxm Ujx Aktslp Technical data: >> Year of manufacture: 2013, Machine no. D4D 130601 >> Center height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed stages from 40-3000 RPM, infinitely variable >> Quill stroke: 120 mm >> Tailstock: MK3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Footprint / Dimensions approx.: Length 1,600 x Depth 0.9 x Height 1.3 meters >> Weight approx.: 750 kg Accessories and equipment: >> 3-axis position indicator >> 1 three-jaw chuck with 200 mm diameter and 1 set of jaws from Röhm >> 1 four-jaw chuck with 200 mm diameter and 1 set of jaws from Röhm >> 1 quick-change tool holder without collets >> Steel tool rest with 2 pockets >> Chip guard >> Coolant system >> Bed stop About the machine: Offered for sale is an Emcomat 17D, lead screw and pull spindle lathe, manufactured in 2013, in well-maintained condition. The machine is fully functional, of course. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to inspect this machine on-site while it is powered on and to convince yourself of its condition.

Year of construction: 2014, condition: used, functionality: limited functionality, machine/vehicle number: 02/2014, The flat pouch packaging machine is suitable for packaging bulk products, granular and powdered materials, spices, and cream powders into paper-based or composite film packaging. It requires a continuous supply of the material to be filled and an intermittent supply of packaging material. All packaging operations are performed in automatic mode. The equipment has been taken out of production, had no issues, but has not been used for three years, so it may require refurbishment. Bjdpfx Asz Ryfwjktolp Stored in a covered, enclosed warehouse.

Condition: ready for operation (used), functionality: fully functional, spindle bore: 20 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 65 rpm, overall weight: 170 kg, total length: 1,200 mm, total width: 450 mm, Single-phase 230-volt, 2-speed motor is running smoothly. Geared headstock, gears running in oil. 8 spindle speeds adjustable from 65 to 2800 RPM. Bsdpfxjz E Ryme Aktelp Power feed in sideways directions. Thread cutting possible, gear changes included. MT2 tailstock spindle. Made in Austria. Emco cabinet. Quick-change toolpost. Distance between centers: 620mm Center height: 105mm Spindle bore: 20mm Emco FB2 milling column. Geared head, gears running in oil. 6 spindle speeds adjustable from 120 to 2000 RPM. Head adjustable in height and angle. MT2 spindle. Overall dimensions: 120x45x115cm Includes all accessories as shown in front of the machine. Contact us for shipping options! €2,650.00

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Rotational speed: 2800 RPM Maximum disc diameter: 300 mm Minimum disc diameter: 294 mm Bjdpfx Asz D A D Isktslp Disc bore: 30 mm Disc thickness: 3.2 mm Adjustable upper table height Upper table dimensions: 420x310 mm Adjustable headstock angle from -45 to +45 degrees Motor: 1.5 kW Power supply: 230 V Year of manufacture: 2006 Weight: 38 kg External dimensions: 60x90 cm, height 65 cm CE marking

Condition: like new (used), functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 200 t, operating speed: 50 mm/s, table width: 1,300 mm, table length: 4,200 mm, ram plate width: 1,300 mm, ram plate length: 4,200 mm, distance table to ram: 300 mm, total length: 14,090 mm, total width: 2,600 mm, total height: 2,380 mm, overall weight: 13,000 kg, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, The QIULIN BY624×14/20 industrial hydraulic press is designed for pressing and gluing flat components, veneer pressing, and the production of furniture and door elements. It features a single-platen design with two heating plates. The heating is electric, using thermal oil, with separate temperature control for the upper and lower plates. TECHNICAL SPECIFICATIONS – CATALOG DATA: – Brand: QIULIN – Model: BY624×14/20 – Country of origin: China – Type: hot hydraulic press – Pressing force: 2000 kN, 200-ton class – Number of working platens: 1 – Number of heating plates: 2 – Length of working plates: 4200 mm – Width of working plates: 1300 mm – Plate thickness: 52 mm – Maximum press opening: 300 mm – Unit pressure: 3.7 kgf/cm², approximately 0.36 MPa – Working temperature: from ambient temperature to 120°C – Total installed power: 79.35 kW – Plate closing speed: 50 mm/s – Heating: electric with thermal oil – Separate temperature adjustment for both plates – Automatic plate opening – Semi-automatic operation EQUIPMENT VISIBLE IN THE PHOTOS: – Robust frame construction – Hydraulic cylinder assembly – Hydraulic power unit – Separate control panel – Conveyor belt and table for material feeding and removal CATALOG DIMENSIONS OF THE UNIT: – Length: 14,090 mm – Width: 2600 mm – Height: 2380 mm – Weight: approximately 13,000 kg Used machine, as shown in the photos. Blodpfx Ajz Ix Aujktep Paid transport can be arranged. Please contact us for details. JBS Woodworking Machinery WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: used, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 22 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,400 °C, inner dimension length: 400 mm, inner dimension width: 400 mm, inner dimension height: 400 mm, total length: 1,020 mm, total width: 810 mm, total height: 1,510 mm, overall weight: 400 kg, Equipment: CE marking, 2 electrically heated chamber furnaces, manufacturer Thermconcept. Type: KC 64/14 Maximum temperature: 1400 °C Internal dimensions: 400 x 400 x 400 mm (W x D x H) External dimensions: 810 x 1020 x 1510 mm (W x D x H) Volume: 64 l Power: 15.0 kW Current consumption: 22 A Bledezmfvnjpfx Aktop

Condition: used, functionality: fully functional, This used STOW pallet rack is a compact, high-performance heavy-duty racking system designed to meet industrial warehousing demands. The modular high bay racking is ideally suited for logistics centers, industrial applications, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 2,250 kg per level and a bay load of up to 9,000 kg, this immediately available pallet racking system provides an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 1,400 cm - Shelf load: 2,250 kg - Beams: approx. 270 x 12 x 5 cm PNB0472 - Beam color: yellow powder-coated - Frames: approx. 1,050 x 110 cm, pre-assembled - Frame color: blue powder-coated - Levels: Floor + 4 - Pallet positions: 75 including positions at floor level - Version: Used STOW system SCOPE OF DELIVERY: - 06 x frames (approx. 1,050 x 110 cm), pre-assembled - 40 x beams (approx. 270 x 12 x 5 cm) PNB0472 - 80 x safety clips Price: €2,080.00 net Bledpfx Aks Ahptpjtep €2,475.20 gross An invoice with VAT shown will be provided. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany by our partner carriers – freight costs depend on your postal code - Professional assembly and dismantling by trained teams available as an option - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers possible PLANNING & CONSULTING: Our planning department will be happy to prepare a tailored, no-obligation offer according to your requirements. Whether for new builds, conversions, or expansions – we provide expert advice on your racking configuration. SHOWROOM: We invite you to visit our showroom! Here you can get a comprehensive impression of our pallet racks, storage racks, and additional solutions. Many systems are on display and ready for hands-on inspection. Our expert advisors are available for your questions and personal consultation – we look forward to welcoming you! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Please contact us via message or phone call. You’ll find our phone number on our company profile. ☎️ We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number and we will call you back as soon as possible.

Condition: excellent (used), Year of construction: 1974, Catalog number: 7685 TECHNICAL DATA - inlet width: 440mm - inlet height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen dimensions: 50x50mm - toothed drive shaft, top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (with adjustable speed) - with conveyor belt - length of feed belt: 4006mm - width of feed belt: 380mm - belt feed direction: forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight: approximately 2000kg Bods Aggbqjpfx Aktslp ADVANTAGES - German-made - with conveyor belt - auto-reverse - used shredder, very good condition Net price: 76,900 PLN Net price: 17,880 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Condition: used, Year of construction: 1969, Used Machine Year of manufacture: 1969 Features and technical specifications: - Working width: max. 170 mm; planing head: 125 x 170 x 35 mm Blsdpfo Ad Rn Iex Aktsp - Working height: max. 130 mm; planing head: 125 x 130 x 35 mm - 1st shaft: bottom, 3 kW - 2nd shaft: right, 3 kW - 3rd shaft: left, 4 kW - 4th shaft: right, 4 kW - 5th shaft: top, 4 kW - Feed rate: infinitely variable from 5 to 40 m/min

Condition: new, Year of construction: 2014, functionality: fully functional, Lightweight robot, cobot KUKA iiwa 14 R820 Sunrise, cabinet, new/original packaging Year of manufacture: 12/2014 Number of axes: 7 Max. payload: 14 kg Max. working range: approx. 820 mm Scope of delivery: Robot, controller, cables, teach pendant Used item – normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Bedpfx Akez I Rwwstelp Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Due to the weight and size of the robot, it could be shipped within Germany for €95 gross. Shipping costs to foreign countries on request – please specify country, city and postal code. Freight costs on request – please specify delivery address.

Condition: used, functionality: fully functional, This used STOW pallet racking system is a compact, high-capacity heavy-duty rack designed for industrial warehouse requirements. The modular high-bay racking is ideally suited for logistics, industrial operations, large warehouses, and freight forwarding companies. With a shelf load of up to 2,250 kg per level and a bay load up to 9,000 kg, this immediately available pallet rack system provides an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 520 cm - Depth: approx. 110 cm - Length: approx. 1,400 cm - Shelf load: 2,250 kg - Beams: approx. 270 x 12 x 5 cm PNB0472 - Beam colour: powder-coated yellow - Frames: approx. 520 x 110 cm, pre-assembled - Frame colour: powder-coated blue - Levels: floor + 2 - Pallet locations: 45 incl. floor spaces Blode Ahpu Hspfx Aktep - Version: Used STOW system SCOPE OF DELIVERY: - 06 x frames (approx. 520 x 110 cm), pre-assembled - 20 x beams (approx. 270 x 12 x 5 cm) PNB0472 - 40 x locking pins Price: €1,340.00 net €1,594.60 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery across Germany via our partner freight service – shipping costs depend on postal code - Professional assembly and disassembly by trained teams available as an option - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTING: Our planning department will be happy to prepare a non-binding offer tailored to your requirements. Whether new construction, conversion or extension – we competently advise you on your racking configuration. SHOWROOM: You are welcome to visit our showroom! On-site, you can get a comprehensive impression of our pallet racks, shelving systems, and additional solutions. Many systems are assembled and ready for you to experience directly. Our experts are available to answer your questions and provide individual consultation – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Just contact us via message or phone call. You can find our phone number on our company page. ☎️ We can be reached by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, send us a message with your name and number, and we’ll get back to you as soon as possible.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, A very well-maintained machine, originally used for vocational training, with a digital display and good accessories. The machine is connected. Bsdpfx As Aa Ic Usktjlp

Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Year of manufacture: 2016 For cleaning grinding emulsions Supply rate: max. approx. 250 L/min. at approx. 3.5 bar water pressure Overflow to the filter system is provided on site, air- and foam-free. Maximum temperature: 50°C Blsdpfx Akjzwccmotsp Cleaning capacity: 350 L/min. Recirculation from clean tank to dirty tank: 100-350 L/min. Machine supply: max. 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Particle separation limit: approx. 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particle volume: approx. 5.14 m3 Operating volume max.: approx. 4.58 m3 Operating volume min.: approx. 3.60 m3 Process flow: fully automatic full-flow filtration Sludge discharge: fully automatic, with consistent solid content The dirty liquid is fed via on-site pumping stations. The chips and fine sludge generated during grinding (grinding debris, scale, corundum) are discharged via a scraper conveyor. The sludge is pre-dried in the upper section of the scraper. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. The system operates fully automatically. Maintenance: annual maintenance Availability: 10-2026 Double scraper tank for discharging grinding sludge Type: KR 1.75-5.1 Total volume: approx. 5.14 m3 Maximum volume: approx. 4.58 m3 Length: approx. 4,000 mm, including 70 mm stiffening Width: approx. 1,890 mm, including 140 mm stiffening Height: approx. 1,105 mm, including 100 mm base profile Neck height: approx. 2,300 mm Theoretical maximum discharge volume: 15 kg/h Function: Coolant tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated at the rear into the scraper tank. Oil-tight welded, with internal circumferential bevel gear, various cover plates (non-walkable plates screwed onto an angle frame), without ladder, without railing, without internal access rungs Maximum volume: approx. 0.55 m3 191026ä

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,023 h, load capacity: 1,400 kg, lifting height: 4,350 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 1,920 mm, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 1,326 kg, total height: 1,920 mm, total length: 1,950 mm, total width: 800 mm, fuel: electricity, STILL EXV 14 i – Electric pedestrian stacker TECHNICAL DATA Lifting capacity: 1.400 kg Lifting height: 4.350 mm Closed height: 1.920 mm Free lift: 1.400 mm Mast: Triplex (3F435) Fork length: 1.150 mm Drive: Elektro 24V Battery: 24 V GEL Charger: Einphasig 24 V 36 A Gel Tyres: Polyurethan Poly Service weight: 1.326 kg Length: 1.950 mm Width: 800 mm Bjdpez Ap I Hjfx Aktelp Year of manufacture: 2019 Operating hours: 3.023 h Condition: working condition EQUIPMENT Pulse control, Initial lift Internal no.: 1309288 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 2003, gebraucht 2003 4544 prompt, Zwischenverkauf v Spanien 13800 € 1 50 - 1700 (12) U/min ISO 40 600/210/400 mm 800 x 225 mm 1500 mm 1350 mm 1850 mm 950 kg 1,5 kW with 3-axis digital display or Cooling equipment Machine lamp Swivelling universal milling head (Huron design) Horizontal milling device with counter bearing Table enclosure automatic feeds in X and Y Machine feets User Manual and EG Confirmation english BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. Bljdpfeyrhtzex Aktjp • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details: