Used Four-Head Pease Pea Sheller for sale (11,887)

Condition: new, power: 338 kW (459.55 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: intarder, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: central locking, cruise control, fog lights, spoiler, = Additional options and accessories = - CD - Immobiliser - Spoilers - Sun visor - Tachograph = Remarks = Country of origin: SPAIN Displacement: 11,120cc Brakes: Electronic Braking System Emergency Brake Assist Construction: Tractor Head ADblue tank 135L LED daytime running lights Mobile Phone preparation Bluetooth Fifth wheel Electr. And headed rear view mirrors Rear differential lock Electr. Stability Programm ESP Air Suspended front seats Electronic Stability Programm ESP Lane Departure Warning System Model: AS440S46T/P Exterior Color: White Cylinders: 6 Kilometer: 740,000 km less than Interior Color: Med. Grey Max Axle Load: 8,000 / 13,000 kg Pgsdjy Tymdspfx Alhjn

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, axle configuration: 6x6, wheelbase: 3,800 mm, fuel: diesel, gearing type: mechanical, emission class: euro3, Year of construction: 2026, Equipment: air conditioning, cruise control, differential lock, fog lights, = Additional options and accessories = - Immobiliser - Spare wheel = Remarks = Cabin type: Active Time Country of origin: Spain Displacement: 12,900 Steering: LH Drive Construction: Tractor Head EBS + BAS Type: AT720T47WTH Fifth Wheel: Jost fifth wheel Rear Axle : HR-TP Colour: 50105- White IC 194 Headlamps Protection Roof Rotating LED lights Reverse Buzzer Pneum. Horn-Chassis Without PTO preparation Bunk Curtains External Sunvisor 2 lowered bunks w/o prot net Headed Electric rear mirrors Drive T. 14.00R20 Front Multileaf Susp Speed Limiter 80KM/H Rear Axle ratio 5.01 Senza ADM Safety Hor. Filter Cartridge Horizontal air filter 630cc air compressor Standard airtank plating Steel air tanks 90A alternator Standard gear mode 08329 APU free discharge Horiz Batt side fram STD cab insulation Standard grey plastic part Without roof 02640 Mechanical Cab Suspension Manual Cab Tilt AT low roof cab Roof in standard color Standard reverse Temperate countries preparation S Disp oper ped post Fabric air susp driver seat Limitation on CC Lower exhaust pipe Eng RPM = 1900 REV/ 5th W EC POSI06139 front anti roll bar Rear anti roll bar Filter HP TR/NO heat Serb. Comb. 390L ZF 16S 2520 to GBOX Standard Headlights Pgedpfjy Tylgjx Alhjn Plates in ECC languages Jack R. overhang 780mm Loads 8000-130000-13000 kgs Bulb rear lights Mechanical battery switch Fabric Sta. 2 way adj. pass Engine plate radiator guard Provision radio and CB Rear suspension no spacer Rear cross member Rear multileaf susp Steel wheels Twinned wheels Grey IC44 chassis Standard cab trim mph/kph speedometer soft touch foam steering wheel with stickers79240 Aux. chassis for 5th wheel Pre heater Generic towhook Trattam. Prot. STD 15 Pin trailer plug Towing version Ft/Rr Torque 1:1 Tyre inflation hose VIN code check digit warning Triangle Radice VIN WJM STD setting C11/C13 Steel front bumper = More information = Number of cylinders: 6 GVW: 33.000 kg

Condition: good (used), Hang 87F 3-Head Eyeletter with Extraction Manufacturer: Hang Germany Podpszfwxrofx Alhegn Very good condition, recently serviced. The machine is used for setting eyelets. Three eyeletting heads with adjustable spacing and the ability to deactivate a specific head. Installed waste extraction system immediately after eyeletting. Cardboard thickness: 0.2-4 mm Throat depth: 300 mm Head spacing: adjustable from 70-320 mm Cycle time: 0.5 s The machine uses Hang No. 272 ​​rivets. Weight: 570 kg Power supply: 380 V The cycle is initiated by a foot pedal. Eyelets included.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Pjdpfoy Uiyvsx Alhjgn Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: good (used), Year of construction: 1990, Four-side planer REX HOMS-310 AD - German production - year of production 1990 - for wet wood TECHNICAL PARAMETERS: - planing width max. 310 mm - planing height on both sides 300 mm - planing height on four sides 100 mm - 35 mm spindle diameter Pgsdpfx Aljhikplohon - 2 x 11 kW shaft motors power - spindle motor power 2 x 7.5 kW - feed speed adjustable on the variator - feed speed 6-36 m / min - four upper pulling shafts - two lower pulling shafts - four auxiliary rollers in the table top - brake - minimum length of the element 600 mm Machine dimensions: - length 290 cm - width 170 cm - height 210 cm - weight ~ 3500 kg

Condition: like new (used), Year of construction: 1991, functionality: fully functional, Weinig PROFIMAT 22N four-sided planer Pgodpothfh Ejfx Alhon – after technical inspection – very good condition – technical documentation TECHNICAL SPECIFICATIONS: planing width 220 mm planing height 120 mm spindle diameter 40 mm bottom head 4 kW right head left head 11 kW top head 5.5 kW bottom head 4 kW feed motor 2.2 kW feed speed 6-22 m/min four upper steel feed rollers one upper rubber feed roller feed via cardan shafts pneumatic pressure electric height adjustment length of the infeed table 2485 mm machine dimensions (L/W/H) 400 / 180 / 170 cm weight ~ 1800 kg

Condition: excellent (used), Year of construction: 1988, Four-sided planer WEINIG PROFIMAT 22N. No. 4 – DTR – German production – year of production 1988 – adjustable heads TECHNICAL PARAMETERS: planing width 220 mm planing height 120 mm spindle diameter 40 mm 1) bottom head 5.5 kW Pgsdpfsi Dn Nusx Alhon 2) right head 3) left head 7.5 kW 4) upper head 7.5 kW feed motor 2.2 kW feed speed 6 - 20 m/min four upper steel pulling rollers one upper rubber pulling roller one pulling roller in the tabletop feed on cardan shafts electric height adjustment length of the pre-top 1975 mm central lubrication pneumatic clamps machine dimensions (length/width/height) 350 / 200 / 170 cm weight ~ 1800 kg

Condition: like new (used), Four-side planer REX HOMS-410 – German-made – Suitable for wet wood TECHNICAL SPECIFICATIONS: Max. planing width: 410 mm Planing height (two-sided): 200 mm Planing height (four-sided): 200 mm Spindle diameter: 40 mm Cutterhead motor power: 2 x 11 kW Spindle motor power: 2 x 5.5 kW Feed speed: steplessly adjustable Feed speed adjustable via frequency inverter Three upper feed rollers Three lower feed rollers Two auxiliary rollers on the worktable Brake Minimum workpiece length: 450 mm Machine dimensions (L/W/H): 250 / 220 / 180 cm Pgsdpforwl Dbox Alhon Weight: ~3500 kg

Condition: excellent (used), Year of construction: 1995, Weinig Profimat 23E four side planer - German production - year of production 1995 - right and left spindles with a face milling cutter ensuring parallelism and a right angle of 900 - element width measurement - electronic width adjustment Pgodpfx Ajibq Nijlhjn TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm electronic planing width control 1 lower spindle 4 kW 2 right spindle 4 kW 3 left spindle 4.2 kW (face milling) 4 spindle right 4.2 kW (face milling) 5 upper spindle 7.5 kW element width measurement electric height adjustment of the feed rollers electric height adjustment of the upper spindle spindle diameter 40 mm six top steel rollers yen top roller, rubber one roll in the table top pulling pneumatic pressure feed on cardan shafts pre-table length 2470 mm diameter of nozzles 140 mm Machine dimensions 456x240x220 weight 4000 kg

Condition: excellent (used), CATALOG NUMBER 7679 TECHNICAL DATA - Maximum planing width: 610 mm - Maximum planing height, double-sided: 200 mm - Electrically adjustable table height (up/down) - Maximum planing height, four-sided: 100 mm Top section: - Driven infeed shaft, toothed - Kickback devices - Pressure unit - 2 driven shafts, toothed - Pressure unit - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure unit - Outfeed driven shaft, smooth Bottom section: - Guide bar - Driven roller, toothed Psdpfxoy T Rhxe Alhogn - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth driven rollers Rear section: - 2 side spindles with pressure unit 1) Right vertical, 100 mm, 4 kW 2) Left vertical, 100 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable vertically and horizontally - Manual planing width adjustment - 6 feed rates: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Dimensions (L/W/H): 2500 x 1800 x 600 mm - Weight: approx. 3000 kg FEATURES - Perfect for log, flooring, and similar applications - Manufactured by German brand KUPFERMUHLE - 2 horizontal planing shafts + 2 vertical spindles - Used planer, in very good condition Net price: 56,900 PLN Net price: 13,550 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: excellent (used), Catalog number 7995 TECHNICAL DATA - max. planing width 240mm Pgjdpfx Aley T N Ahjhen - max. planing height 140mm 4 spindles: 1) horizontal bottom 240mm, 5.6kW 2) vertical right 140mm, 5.6kW 3) vertical left 140mm, 7.5kW 4) horizontal top 240mm, electrically adjustable up/down, 0.37kW - 7.5kW - diameter of all spindles 40mm - all spindles adjustable up/down and right/left - from above, 5 toothed, twisting feed rollers, including 1 double roller - from above, 2 rubber feed rollers - from below at the outlet, a split metal feed roller - rollers are pneumatically pressed - 3 side pressure rollers - electric adjustment of planing thickness, 0.37kW - length of infeed table 2080mm - stepless feed rate adjustment via frequency inverter - feed via Cardan shafts - feed motor 3.7kW - central lubrication - diameters of dust extraction nozzles 4x125mm - dimensions L/W/H 3600x1650x1700mm - weight approximately 3000kg ADVANTAGES – German-made, GUBISCH brand – with 4 heads – DTR documentation available – used planer, very good condition Net price: 32900 PLN Net price: 7840 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Catalogue number 6393 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - Number of spindles: 4: 1) Bottom horizontal, 200 mm, 5.5 kW 2) Right vertical, 150 mm, 4 kW 3) Left vertical, 150 mm, 4 kW 4) Top horizontal, 200 mm, 5.5 kW - All cutterheads adjustable vertically and horizontally - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm Psdpfoy Ti R Eex Alhogn From above: - 6 feed-in traction rollers, toothed (including 2 double) - 1 feed-out traction roller, rubber-coated From below: - Feed-in drive roller, toothed, steering, integrated in lower table - 3 side pressure rollers - Feed-out traction roller, metal, smooth - All rollers pneumatically loaded - Infeed table length: 2,130 mm - Height-adjustable table - Centralized lubrication system - Electric adjustment of planing thickness - Lift motor: 1.1 kW - Stepless feed speed control via inverter - Feed drive motor: 3 kW - Feed via Cardan shafts - Fully enclosed in cabin - Extraction port diameters: 4 x 130 mm - Dimensions (LxWxH): 3,550 x 1,750 x 1,800 mm - Approx. weight: 3,000 kg ADVANTAGES – Equipped with 4 cutterheads – Ideal for wet and dry timber – DTR operation and maintenance manual included – Used machine, very good condition Net price: 65,900 PLN Net price: 15,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number: 7759 TECHNICAL DATA Circular saw: - Max blade diameter: 350mm - Spindle: 30mm - Blade adjustable front/back, up/down, angle - Pneumatic movement of the saw unit front/back Pjdpfx Aljy Ry H Sjhsgn - Blade guard - Motor: 2.2kW I and II milling spindles: - Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 150mm - Spindle lock - Pneumatic movement of units front/back - Manual up/down adjustment - Max cutter diameter: 300mm - Motor approx. 7.5kW - Side sliding table – manual traverse - Table dimensions (L/W): 1000x380mm - Angle fence - Pneumatic workpiece clamp - Dimensions (L/W/H): 2600/3200 (for shipping 2200)/1540mm - Weight: 1450kg ADVANTAGES – German manufacture – 3-spindle machine – Not repainted – Very good condition – Used tenoner Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7134 TECHNICAL DATA - Max. planing width: 500 mm - Max. planing height: 190 mm Top section: - Anti-kickback fingers - Pulling feed roller, sequential - 2 rows of pressure rollers - Pull-in feed roller, sequential - 500 mm planing cutterhead, 4-knife, 7.5 kW motor - Pressure rollers - Smooth, pulling outfeed roller - Outfeed pressure roller Bottom section: - Adjustable infeed table + pressure roller - Smooth sliding roller - 500 mm planing cutterhead, 4-knife, 5.5 kW motor - 2 smooth sliding rollers - Side pressure roller Rear section: - Side spindles: 1) Right vertical 140 mm, 4 kW 2) Left vertical 140 mm, 4 kW - Spindle diameter: 40 mm Pjdjy R Dzmepfx Alhegn - Spindles adjustable up/down, right/left - Stepless feed speed adjustment: 8–30 m/min - Electric table lifting - Extraction port diameters: 2x145 mm, 2x160 mm - Dimensions (L/W/H): 2050 x 1700 x 1700 mm - Weight: 2100 kg FEATURES – Ideal for flooring production – Electric table lifting – Czech manufacture – Used planer, in very good condition Net price: 37,900 PLN Net price: 9,020 EUR (based on EUR rate 4.2) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7641 TECHNICAL DATA - Max. planing width: 800 mm - Max. planing height: 200 mm - Upper section: - Pull-in feed roller, toothed - Pawls - Pressure unit - 2 feed rollers, toothed - Pressure unit - Planing shaft 800 mm, 4-knife, 7.5 kW - Pressure units - Profiling shaft 800 mm, 4-knife (fitted with 3 straight knives, 1 profiling knife) - Pressure unit - Outfeed roller, smooth - Lower section: - Guide rail - Infeed table - Feed roller, smooth - Planing shaft 800 mm, 4-knife, 7.5 kW - 2 feed rollers, smooth - Smooth, split running roller - Side pressure at outfeed - Rear section: - 2 side spindles + pressure units: 1) Right vertical 90 mm, 4 kW 2) Left vertical 90 mm, 4 kW - Spindle diameter: 35 mm - Spindles arranged alternately - Spindles adjustable up/down, right/left 3) Additional lower horizontal spindle, 350 mm, adjustable up/down + right/left, 5.5 kW Psdpfx Aey T Rgzjlhogn - Spindle diameter: 40 mm - Outfeed: 4 upper metal sliding rollers, 2 lower feed rollers, rubber-coated - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 7/14/9/18/11.5/23 m/min - Feed motor: 2.2 kW - Extraction outlet diameters: 3×180, 130 mm - Dimensions (L×W×H): 3100×2000×1900 mm - Weight: approx. 3,500 kg ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing beams, flooring, etc. – 3 planing shafts + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer in very good condition Net price: 64,900 PLN Net price: 15,450 EUR (based on an exchange rate of 4.2 EUR) (Prices may change with significant currency fluctuations)

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed Podoy Sny Ajpfx Alhogn - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalog number 7289 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 170 mm 3) Left vertical, 170 mm (spindles 2 and 3), 11 kW 4) Top horizontal, 230 mm, 11 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 11 kW - All spindles adjustable up/down, left/right - Spindles 4 and 5 electrically adjustable up/down - Spindle speed: 8,000 rpm - Spindle diameter: 40 mm - All spindles equipped with electric braking - 6 feed-in, driven, toothed upper rollers, including 1 double - Double exit, driven, rubber-coated upper roller - Double exit, driven, rubber-coated lower roller - Side pressure unit - Feed via Kardana shafts - Pneumatically tensioned rollers - Infinitely variable feed speed: 6–24 m/min - Feed motor: 4 kW - Electric planing thickness adjustment - Body lifting motor: 0.55 kW - Central table lubrication - Extraction nozzle diameter: 6 × 140 mm - Dimensions (L×W×H): 4,900 × 2,400 × 2,000 mm - Weight: approx. 4,000 kg FEATURES – German-made, WEINIG brand – With 6 heads – Not repainted – Used planer, very good condition Original pictures Net price: PLN 142,900 Net price: EUR 34,000 (based on an exchange rate of 4.2 EUR) (Prices may vary with significant exchange rate fluctuations) Podpfoy N Ahiox Alhegn

Condition: reconditioned (used), functionality: fully functional, Effective cutting length: 4000 mm Blade diameter: 450 mm Pneumatic tilting of the cutting heads Tilting angle: 90-45° Pedjzgh Umopfx Alhsgn

Condition: reconditioned (used), single-head miter saw blade diameter 450 fence with electronic positioning, length 4200 mm outfeed roller conveyor Podpfx Alozgbbgjhjgn

Condition: excellent (used), Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, turning height: 3,000 mm, workpiece weight (max.): 30,000 kg, turning diameter: 3,500 mm, power: 100 kW (135.96 HP), REM SC 35 CNC 1S | CNC Vertical Turret Lathe | Ø3,500mm | 30 Tonnes Robust single-head CNC Vertical Turning Center from REM Bacau — engineered for high-torque, large-diameter turning with outstanding precision and reliability. TECHNICAL SPECIFICATIONS: • Max. Machining Diameter: 3,500 mm • Min. Machining Diameter: 0 mm • Max. Part Height: 3,000 mm • Max. Table Load: 30 tonnes • Table Diameter: 3,000 mm • Table Speed Range: 2–130 rpm Podotpnlwjpfx Alhegn • Main AC Motor (Turning): 100 kW • Max. Faceplate Torque (Turning): 105,000 Nm • Ram Vertical Stroke (Z-axis): specified in full datasheet KEY ADVANTAGES: ✔ Single precision head — ideal for high-accuracy turning jobs ✔ Massive 30-tonne workpiece capacity ✔ 100 kW AC main drive for continuous heavy-duty performance ✔ Full CNC control — available with Siemens or Heidenhain ✔ Rigid, thermally compensated construction Applications: Wind energy components, large flanges, rings, turbine housings, pressure vessels. Manufactured by REM Bacau – Romania | 60+ years of VTL manufacturing. Available for inspection. Worldwide export. Contact us for full datasheet, video, and quotation.

Condition: new, Year of construction: 2026, NEW 2026 – REM SCR 50 CNC 2S | Dual-Head CNC Vertical Turning Center High-performance heavy-duty CNC Vertical Turning Center with two independent milling heads and two disc-type automatic tool changers. Designed for the most demanding precision turning and milling of large workpieces. TURNING ENVELOPE: • Faceplate Diameter: 4,500 mm • Machining Diameter: 4,700 mm (with CE enclosure) | 5,300 mm (open) • Machining Height: 2,100 mm / 3,500 mm • Max. Workpiece Weight: 30,000 kg / 50 tonnes AXIS TRAVELS: • X & U-Axis (Ram Carriage): -100 to 2,600 mm • Z & W-Axis (Ram): 1,250 mm / 1,700 mm WORK TABLE: • Faceplate: 4,500 mm with T-slots | Jaw chuck height: 200 mm • Speed: 0–50 rpm • Power (S1): 96 kW / 2×75 kW • Torque (S1): 130,000 Nm / 320,000 Nm Pgodpfxehh Dnxj Alhon • Drive: ZF gearbox reducer + belt transmission MILLING RAMS (Left & Right | 250×250 mm | KM 63): • 2× Independent heads — simultaneous or individual operation TOOLING: • 2× Disc-type ATC (12 stations each — turning + milling) • Maximum tool weight per station specified on request Manufactured by REM Bacau – Romania. New machine, available on order. Delivery worldwide. Contact us for full specs, videos, and pricing.

Condition: new, Year of construction: 2026, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SCR 44 2SF, NEW 2026 – REM SC 44 CNC 2SF | Heavy-Duty CNC Vertical Turning Center Top-of-the-range CNC Vertical Turning Center from REM Bacau, featuring dual milling heads, dual automatic tool changers and Siemens Sinumerik 840D SL control. Built for the most demanding heavy machining applications. TURNING ENVELOPE: • Faceplate Diameter: 4,000 mm • Machining Diameter: 4,400 mm • Machining Height: 2,000 mm • Max. Workpiece Weight: 16,000 kg AXIS TRAVELS: • X-Axis (Ram Carriage): 2,500 mm • W-Axis (Elevating Cross Rail): 1,200 mm • Z-Axis (Ram Vertical Travel): 1,250 mm • Indexing Step: 300 mm WORK TABLE: • Diameter: 4,000 mm | Speed: 1–60 (90) rpm • Power (S1): 100 kW | Torque: 110,000 Nm • C-Axis: 0.02–1.5 rpm | C-Axis Torque: 55,000 Nm MILLING RAM (250×250 mm | KM 63 / ISO 50): • Ram Speed: 0–2,500 rpm | Power: 40 kW | Torque: 1,400 Nm TOOLING: Pedpfx Ajg Uwmqslhjgn • 2× ATC Magazine (12 turning + 12 milling tools each) • Control: Siemens Sinumerik 840D SL Manufactured by REM Bacau – Romania | 60+ years of expertise. Fully inspected and tested. Export worldwide. Contact us for pricing, videos, and full specs.

Condition: like new (used), Year of construction: 2025, Maufung MF-Smart390A Auto Book Casing In & Joint Forming Line Model: MF-Smart390A Power Supply: 380V, 50HZ Mainframe Power: 9kW Pgedpfx Alsy Sv Inohjn Block Thickness: 2–60mm Block Size (Max): 390×297mm Block Size (Min): 100×100mm Mechanical Speed: 600 pcs/hour Machine Dimensions (L×W×H): 4950×2650×2000mm Machine Weight: 2000kg Maufung Head and Tail Banding Machine Model: MF-HBM420 Model: MF-HBM420 Power Supply: 220V, 1 Phase, 50HZ Mainframe Power: 1.5kW Air Compressor: 6Bar Machine Speed: 11 pcs/minute Book Block Thickness: 10–60mm Book Block Size (Max): 350×420mm Book Block Size (Min): 100×100mm Machine Dimensions (L×W×H): 700×850×1550mm Machine Weight: 270kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1990, LEDINEK BSG 150 head sharpener with knife setting device - in a warehouse - Slovak production TECHNICAL PARAMETERS engine power 0.55 kW sharpening length 440 mm tool diameter 125 mm - 203 mm manual feed spindle diameter 50 mm Pgsdeihpl Ropfx Alhon knife setting device Machine dimensions: 120/85/165 cm weight 400 kg

Condition: excellent (used), CATALOGUE NO. 7966 TECHNICAL DATA - Max. planing width: 770mm - Max. two-sided planing height: 200mm - Electric adjustment of the table up/down - Max. four-sided planing height: 180mm From above: - Driven, toothed feed roller - Kickback devices - Pressure element - 2 driven, toothed feed rollers (first one sequential) - Pressure element Pjdpfx Aszfp A Njlhsgn - 770mm planing shaft, 4-knife, 7.5kW - Pressure element - Smooth outfeed roller From below: - Guide bar - Split, smooth sliding roller - 770mm planing shaft, 4-knife, 5.5kW - 2 smooth driven feed rollers From the side: - 2 lateral spindles + pressure element: 1) Right vertical, 180mm, 5.5kW 2) Left vertical, 180mm, 5.5kW - Spindle diameter: 30mm - Spindles adjustable up/down, right/left - Manual planing width adjustment - 4 feed speeds: 6/9/12/18 m/min - Feed motor: 2.4kW - Extraction nozzle diameter: 160mm, 180mm, 2x120mm - Dimensions (L/W/H): 2600x1700x1650mm - Weight: approx. 3000kg ADVANTAGES - Ideal for processing beams, flooring, etc. - German-made by KUPFERMUHLE - Supplied with 2 spindle heads for the side spindles - 2 horizontal planing shafts + 2 vertical spindles - Used planer, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (subject to 4.2 EUR rate) (Prices may change with significant rate fluctuations)