Used Trencin for sale (37)

Condition: used, Year of construction: 1982, functionality: fully functional, total length: 2,575 mm, total width: 1,110 mm, total height: 1,450 mm, type of input current: three-phase, overall weight: 1,550 kg, Accessories: 200 mm chuck, rotating center for the tailstock, micrometer stop for longitudinal feed, chip and coolant emulsion tray including pump, lighting, technical documentation. Basic technical parameters: Swing over bed 400 mm, Swing over carriage 220 mm, Swing in gap 600 mm, Gap width 230 mm, Turning length 1000 mm, Spindle bore 50.5 mm, Spindle taper Morse 6, Tailstock center taper Morse 5, Spindle speeds: Number of steps 12, Range 1st range 45-2000 rpm, 2nd range 22-1000 rpm, Maximum tool section 30 x 20 mm, Max. workpiece weight clamped in centers 300 kg, Main motor power 5.5 kW, Machine dimensions L x W x H: 2575 x 1110 x 1450 mm, Machine weight 1550 kg. The machine can be viewed and fully tested in our warehouse in Přerov by prior arrangement. Rcodpfx Aez Tdcfeirsh

Condition: good (used), functionality: fully functional, For sale is a robust TOS Trenčín SUI 40 guide and lead screw lathe with a center distance of 1,500 mm. This machine comes from an industrial setting and impresses with its massive cast iron construction, high rigidity, and excellent smooth running. The proven SUI series from TOS is one of the most durable conventional lathes in its class and is still valued today in industry, toolmaking, and training workshops for its precision and reliability. The machine is in a well-maintained, used condition. All essential components are present. The machine bed shows a good overall condition; guides and supports appear well-maintained. The mounted three-jaw chuck, four-position tool holder, tailstock, and safety guard are included in the offer. Equipment: ✓ Center distance 1,500 mm ✓ Massive machine bed ✓ Guide and lead screw ✓ 3-jaw chuck ✓ Four-position tool holder ✓ Tailstock ✓ Coolant system ✓ Safety guard on the chuck ✓ Emergency stop switch ✓ Industrial version Application areas: Ideally suited for: Mechanical engineering Toolmaking Maintenance Rcjdpfx Aiszmp Tkoroh Workshops Repair shops Training workshops Single-piece and small-batch production Condition: Used Good overall condition Signs of wear consistent with age Inspection is highly recommended Sale from the current location

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Fixed setting vice with roller quills for SUI 80 TRENCIN Capacity : 210 - 370 mm 365 - 520 mm Only available as a set Rodpfou Tvdbjx Airech

Year of construction: 1998, condition: used, Speed: 12.5-2000/min, with documentation. An on-site inspection is possible. Rcsdpsz Da I Rsfx Aireh

Condition: used, Universal lathe with guide and lead screw, TOS Trenčín SN 63 C (year of manufacture 2000) from a business liquidation. Designed with a 630 mm swing over bed and a 3000 mm distance between centers, suitable for medium to heavy shafts, flanges, and large cylindrical components. EQUIPMENT & TECHNOLOGY - Swing over bed: 630 mm - Distance between centers: 3000 mm (long bed version "C") - Hardened and ground bed ways - Guide and lead screw drive: Metric and inch threading - 2-axis digital readout (DRO) - Steady rests/follow rests available (see photos) The SN series from TOS Trenčín is considered a classic among conventional universal lathes – robust, precise, and easy to maintain. CONDITION Used, functional. Located near Nuremberg, viewing by appointment. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - 3-jaw chuck - Fixed and traveling steady rests / follow rests Rcjdpfezphf Dex Aireh - Tailstock with center - 4-way tool holder - Set of turning tools / quick-change tool holder - 2-axis digital readout (DRO) Price on request. We will be happy to advise you – competent advice and nationwide service.

Condition: used, Lathe, taken directly from the workshop. In good working order. Price is negotiable. Rcodozgak Tepfx Airoh Comes with several accessories.

Condition: good (used), Diameter over bed: 500 mm Diameter over carriage: 270 mm Diameter of swing over cross slide: 700 mm Distance between centers: 1500 mm Diameter of tailstock spindle housing: 70 mm Travel of tailstock spindle: 180 mm Travel of cross slide: 300 mm Maximum workpiece weight: 300 kg Rcsdpozf Nd Hofx Aireh Total power: 6.6 kVA Machine weight: 1760 kg

Condition: used, Technical details: clamping surface area: 630x400 mm no. of flutes: 8 rotatability of the table - manual/mechanic: 360 v. Hand ° weight of the machine approx.: 175 kg Angular table - machine table- machine clamping table for milling machine TOS such as FNG or FNGJ The frame is swiveable via hand wheel 360° (scale 360°) T-slots according to DIN 650 and 508 a=14mm; h=24mm; b=25mm; c=9mm foot plate: size 380x300mm with 6 clamping slots WxL=14x20mm Rodpeu Nkrbjfx Airjch *

Condition: excellent (used), Year of construction: 2022, operating hours: 50 h, functionality: fully functional, machine/vehicle number: SK02UXKP0579, measuring range X-axis: 550 mm, measuring range Y-axis: 600 mm, overall weight: 1 kg, repeat accuracy: 0.02 mm, Equipment: documentation/manual, ZEISS T-SCAN hawk metrology laser 3D scanner with accuracy 0,02mm + 0,035mm/m with 3 scanning modes (Standard - 7 red crosses, Fine - 5 blue lines, Single red line for deep holes). Manufacturing year 2022. Fully functional and ready to use. Rodpfx Aeyxy Sdoirjch Included: 3D scanner Calibration panel Powerful Dell mobile workstation still under Dell Pro Support Warranty Software GOM/ZEISS Inspect 2021 licence on USB drive Rigid travel case Laptop bag All original documentation included Inspection under working conditions possible. ZEISS INSPECT 2021: • Opening and editing new and existing projects • Import of point clouds and polygon meshes • Creation, editing, and processing of polygon meshes • Construction of elements: basic geometries, points, sections, curves, surfaces, dimensions • Import of CAD data in standard formats: IGES, VDA, STEP, JT Open, STL, PLY • Use of common alignment methods • CAD comparison with color deviation mapping • Dimensioning and evaluation of form/position according to ISO GPS and ASME Y14.5 • Reporting module Delivery

Condition: good (used), For sale is a heavy-duty industrial lathe TOS TRENČÍN type 16D20 (long-bed version). The machine stands out for its robust construction, smooth operation, and an exceptionally large spindle bore – ideal for shafts, pipes, and large workpieces. Rodpfsypcy Rox Airech Technical Data Machine type: Engine lathe with leadscrew and feed shaft Manufacturer: TOS TRENČÍN Model: 16D20 Control: conventional Max. turning diameter over bed: 400 mm Max. turning diameter over cross slide: 220 mm Spindle bore: 63 mm Max. workpiece length: 1,000 mm Spindle speed range: 8.5 – 2,000 rpm Main drive: 11 kW Dimensions & Weight Dimensions (L × W × H): approx. 2,880 × 1,270 × 1,605 mm Machine weight: approx. 2,800 kg Heavy, torsion-resistant machine construction Large working area for universal turning tasks Precision spindle bearings Smooth running even at high speeds Suitable for single-piece and series production Used Solid industrial machine Technically fully functional Ready for operation Delivery time: immediately Terms: ex-site, loaded free of charge Loading: no problem Transport / forwarding: can be organized

Condition: used, Year of construction: 2006, machine/vehicle number: 76005007 06 0006, turning length: 750 mm, turning diameter: 400 mm, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, overall weight: 5,250 kg, swing diameter over bed slide: 630 mm, center width: 550 mm, The Saeilo Contur TSL 500 is a used inclined-bed lathe, manufactured in 2006. The manufacturer is Trens in Trenčín (Slovakia), where the machine is known as the SBL 500 CNC. The 12-station turret has 6 driven stations, allowing for drilling and milling operations to be performed in a single setup. It is controlled by a Siemens Sinumerik 810D. The machine is located in the Düsseldorf area and was running during our inspection. TECHNICAL DATA - Year of manufacture: 2006 (according to the nameplate) - Control system: Siemens Sinumerik 810D - Swing diameter: 630 mm - Turning diameter: 400 mm - Maximum turning length: 750 mm - Distance between centers: 550 mm - Turret: 12-station, with 6 driven stations - Main drive: 22 kW, max. 4,200 rpm - Machine weight: 5,250 kg (nameplate) EQUIPMENT AND ACCESSORIES - Chip conveyor Tsubaki with cable carrier (SRF 040) - Tool holders, equipped - Turning and clamping tools - Setup tools CONDITION The machine was running during our inspection on October 1, 2026. We can send you short videos of the machine in operation upon request. Rcedpfxjz H Udxo Airsh AREAS OF APPLICATION Suitable for shafts, flanges, and housing parts up to 400 mm in diameter, where transverse drilling or surface machining is to be carried out at the same time. LOCATION AND PROCESSING The machine is located in the Düsseldorf area. Inspections can be arranged by appointment. The buyer is responsible for dismantling, loading, and transport; upon request, we can provide contact information for forwarding companies in the region. Price on request. Please contact us via the contact form.

Condition: like new (used), Year of construction: 1997, functionality: fully functional, overall weight: 2 kg, input voltage: 230 V, input frequency: 50 Hz, We offer this used Allen-Bradley SLC 500 control unit, manufactured in 1997. POWER SUPPLY INPUT MODULE OUTPUT MODULE Model number: 1746-P2 Series: C Input voltage: 85–132 V AC Input voltage: 170–265 V AC Frequency: 50/60 Hz Output current at 5 V DC: 5 A Output current at 24 V DC: 0.96 A Max. user current at 24 V DC: 0.2 A Rsdpfx Aioyutfhoroch Replacement fuse: 250 V–3 A fuse Temperature code: T3C Class and division: I, Groups A, B, C, D, Division 2 Conductor insulation: copper, 75 °C Country of origin: Malaysia Year of manufacture: 1997 If you have any further questions or need more information, please feel free to send us a message or call us.

Year of construction: 2026, condition: new, functionality: fully functional, Equipment: CE marking, 2 deck semi-mobile screener, delivery option with extended chute, hopper extension, lifting chains and petrol generator. Easy handling and transport, low operating costs, easy mesh change, quality spring steel meshes, option to purchase LLC conveyor and change to DB40LC, 3 fractions screener, at any time in the future. Rodpfx Aiez Hl Rverech

Year of construction: 2026, condition: new, Equipment: CE marking, 1 deck vibrating screener. Rcodpfxoz Hwque Airjh Compact dimensions and easy exchange of meshes from 2mm to 80mm. The transport pallet is included. For better handling, it can be supplied with lifting chains. Screener can be eqipped with a petrol generator. The meshes are made of high-quality spring steel. 4 lifting eyes at an ideal angle. The high-strength steel construction ensures maximum stability.

Condition: new, functionality: fully functional, overall weight: 580 kg, Year of construction: 2025, Single deck vibrating screener, option to purchase with extended front panels, lifting chains and petrol generator. The machine is delivered on a transport pallet. Change from transport to work position within minutes. Low operating costs. Very easy to transport. Redpfjxpg Iksx Airjch

Condition: new, functionality: fully functional, overall weight: 2,800 kg, Year of construction: 2026, Equipment: CE marking, Double deck screener on its own O2 category chassis for easy transport. Change from transport to work position within minutes. Diesel aggregate. Mesh mounted in any size from 2mm to 80mm. 2800kg Rodpfx Aexpgyteiroch

Condition: new, functionality: fully functional, overall weight: 650 kg, Year of construction: 2025, Equipment: CE marking, Compact dimensions and easy exchange of meshes. Great performance. For easy handling, it can be moved with lifting chains or by using a forklift. Rodpfx Ajxpg Epeirsch The meshes are made of high-quality spring steel. The high-strength steel construction ensures maximum stability.

Condition: new, Equipment: CE marking, doubled deck vibrating screener, size of the meshes mounted from 2mm to 80mm, 3 fractions, static screener with the possibility of adding 2 or 3 PC-105 conveyors, weight 2200kg Rjdpfxjz Hycao Airoch

Year of construction: 2026, condition: new, 1 deck, 230V vibrating screener suitable for front loaders also. Mesh can be mounted on with size from 2mm to 80mm. Easy trasnport. Rjdpfx Aez Hx D Asirech

Condition: new, Equipment: CE marking, • Stationary drum screener • Double drum with replaceable screen on the outer diameter • Mesh sizes range from 2mm to 80mm, screen width 1260mm • Drum drive: electric, speed adjustable via frequency converter • Outer drum diameter: 1300mm • Inner drum diameter: 1000mm • Screening capacity: up to 30m³/h (depending on input material) Rcodpfx Aez H Iv Ueireh • Input feeding conveyor: electric drive, speed adjustable via frequency converter, hopper width (side of the machine): 1879mm • 2100 kg

Condition: new, Equipment: CE marking, 2-deck screener, possibility of delivery with hopper extension and petrol generator. Simple handling and transport, low operating costs, simple change of the meshes, meshes made of high-quality spring steel. The screener is on a skid frame for quick and easy transport, the built in conveyor for the fine fraction. Rodpjz H Ng Iofx Airech

Condition: new, Equipment: CE marking, Double deck screener on tracks for easy movement. With orbital hydromotor for regulating the speed of the conveyor belt. Radio control. Maximum speed 3.31km/h. Possibility of delivery with the feeder plate with stop rubber on the screen box. Meshes can be mounted in any size from 2mm to 100mm. Rsdpfxez Hydko Airech

Condition: new, Equipment: CE marking, Double deck screener, compact dimensions, simple exchange of meshes, , meshes made of high-quality steel, high-strength steel construction ensures maximum stability. Rsdpfx Aez H I Rrsirsch 2200kg, meshes mounted in any size from 2mm to 100mm.

Condition: new, Equipment: CE marking, Compact dimensions, easy exchange of meshes, one deck screener, delivery option with petrol generator and lifting chains for better handling, meshes made of high-quality spring steel, 4 lifting eyes at an ideal angle, high-strength steel construction ensures maximum stability, screening box on 8 steel springs with ideal angle. Rjdpfxsz H Nb So Airsch 950kg, meshes mounted in any size from 2mm to 100mm.

Condition: new, Equipment: CE marking, 2 deck screener, possibility of delivery with hopper extension and petrol generator. Simple handling and transport, low operating costs, simple exchange of meshes, the screener is on a skid frame for quick and easy transport, the conveyor for medium fraction. 2800kg, 3 fractions Rcjdpjz H I Hgofx Airoh