Used Frech Daw 200S for sale (11,070)

Condition: good (used), Year of construction: 2009, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 510 mm, table length: 1,460 mm, table load: 800 kg, Renishaw measuring probe MP-12 IKZ 15 Bar Interface set Performabnce software package Monitoring B prepared not included X - Travel: 1120mm Y - Travel: 510mm Z - Travel: 510mm Table Length: 1460mm Table Width: 510mm Table load: 800 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 18.5kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:Yes Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 3300mm Width: 2850mm Guedpfx Aew Rm Disnxeb Height: 2800mm Weight: 6100kg

Condition: excellent (used), Year of construction: 2007, turning length: 535 mm, spindle bore: 65 mm, travel distance X-axis: 225 mm, travel distance Z-axis: 535 mm, spindle motor power: 26,000 W, total height: 1,900 mm, total length: 2,900 mm, total width: 2,300 mm, overall weight: 4,380 kg, CNC Lathe MAZAK - QTN 200-II MACH-ID 9481 Make: MAZAK Type: QTN 200-II Gusdeyyxh Topfx Anxsb Control: Mazatrol Matrix Nexus Year: 2007 Max. turning Ø:610mm X-Axis: 225mm Z-Axis: 535mm Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 26kW ATC / revolver:12 Chip conveyor: Yes Tool eye: Yes Hours: 5049H Length: 2900mm Width: 2300mm Height: 1900mm Weight: 4380kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2000, operating hours: 26,600 h, machine/vehicle number: LC612, Used Tetra pak line Overhauled TBA 19 200 ml slim Technical Specifications & Performance DataThis used bottling line is a second hand Tetra Pak aseptic carton packaging solution configured for 200 ml Slim packs. It is engineered for industrial packaging and beverage production of milk and juice products, with reliable performance and efficient downstream handling.Configuration: Tetra Pak TBA/19 200B Slim filler + TSA21 straw applicator + TCP70 case packer + conveyor line + line controller and paper trolleyProduction speed: up to 7,500 packs/hourPack volume: 200 ml SlimFilling technology: AsepticContainer type: Carton (brick packs)Main models and codes: TBA/19 200B (Dev. Step 010V), TSA21, TCP70Operating hours: 26,600Indicative years: filler 2000, packer 2008, straw applicator 2000Advanced Automation & Control SystemsThe line is equipped with industrial automation architecture suitable for high-uptime food and beverage operations. Assessment indicates a GE PLC platform on downstream equipment with recommended PLC and I/O cover upgrades to ensure long-term reliability.Control: Central line controller with integrated conveyor logicPLC/HMI: GE PLC upgrade recommended for DE modulesChangeover: 200 ml Slim change kit included; additional format parts may be required for other sizesSafety: Guarding and interlocks typical of aseptic packaging machineryProduction Line Integration CapabilitiesThis second hand bottling equipment is designed for inline operation from aseptic filling through straw application and case packing. Conveyors provide smooth transfer between machines, enabling balanced production flow and efficient accumulation.Inline operation: Filler → Straw applicator → Case packerMaterial handling: Conveyor line with integration to line controllerApplication range: Ideal for milk and juice in 200 ml Slim cartonsScalability: Potential to adapt to additional carton sizes with proper change partsMachine Condition & Maintenance HistoryThe line has been assessed after maintenance activities and prior to full recommissioning. The filler can be operated up to production step (water test completed). Downstream equipment (DE) powers on but requires further interventions before heating and full operation. An overhaul is recommended with component replacements across superstructure, machine body, jaw system, final folder, service unit, strip applicator, and electrical systems.Current status: Under maintenance/refurbishmentCondition summary: Filler fair-to-poor; DE in poor condition; overhaul advised (6,000/8,000/12,000-hour packages)Operational Performance & VersatilityEngineered by Tetra Pak for aseptic beverage production, the line supports long-life products such as UHT milk and ambient juices. The TSA21 straw applicator ex... Gjdpfx Aeyvilzjnxeub

Condition: used, Year of construction: 2010, Laser cutting machine Manufacturer: Eurolaser Model: LCS XL-1600 Year of manufacture: 2010 Power: 200 W Gedpfjyvk R Ejx Anxjub Working area: 2,270 mm x 1,600 mm Electrical data: max. 6 kW / max. 32 A Previous application: Cutting acrylic glass The laser source was replaced 5 years ago ä12526

Year of construction: 2005, condition: used, Manual length adjustment via handwheel with digital display Guodpfxjy N Dcbe Anxeb For attachment to any Elumatec single-head saw (right) Max. insertion length: 4,500 mm Pneumatic parking brake

Year of construction: 2007, condition: used, Max. Processing length: 2,600 mm Travel stroke Y-axis: 315 mm Travel stroke Z-axis: 230 mm Gujdpfx Aey N Da Tonxob Spindle speed of milling spindle infinitely adjustable between 2,800 and 12,000 rpm. Rotatable support table between 0° and 180°, allowing 3-sided processing in one clamping X and Y axis CNC controlled, Z axis motorized infinitely adjustable downward 4 pneumatic material clamps Manual tool change Minimum quantity spray device USB port operation manual

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Features and technical data: Table size: 2000 x 880 mm (table made entirely of cast iron) with extendable frame support Main motor: pole-changeable 5/6 kW Spindle speeds: 3000/4500/6000/9000 rpm Spindle height adjustment: 110 mm Spindle tilting: 45° with Holz Her 3-roller power feed Gjdpjy Ih Thsfx Anxoub Availability: short term Location: 63934 Röllbach

Condition: used, functionality: limited functionality, input voltage: 400 V, year of last overhaul: 2021, tank capacity: 200 l, Equipment: documentation/manual, Handtmann VF 200 filling machine designed for use in the food industry, ideal for filling casings with food mass. Robust construction ensures durability and reliability during operation. Complete machine. Condition: requires inspection. Gedoy Ry H Eepfx Anxjub

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Gusdjytr Swspfx Anxsb Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: excellent (used), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Model: TSS-70/350-A Year of manufacture: 10/2017 Version: Temperature Shock Test Chamber Cooling unit: Water-cooled Description Used temperature shock test chamber by CTS. Suitable for shock and temperature cycling tests. For use in industry, research, and quality assurance. Areas of Application - Material testing - Aging tests - Electronics and component testing - Temperature shock tests - Automotive and QA Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Precooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Features - Touchscreen control - Microprocessor controller - Programmable operation - Digital setpoint/actual display - 2-zone system - Transfer cart for rapid specimen transfer - Viewing window - Integrated control cabinet - Cooling water connections Technical Construction - Separate hot and cold chambers - Stainless steel test space - Industrial-grade construction Dimensions External: 2335 x 940 x 1820 mm Handling dimensions: 1990 x 940 x 1652 mm Internal: 410 x 480 x 660 mm Weight Approx. 950 kg Documentation - Declaration of conformity - Test certificates - Operating manual - Circuit and piping diagram - Spare parts list Service before delivery (optional) - Functional check - Refrigerant service - Leak test - Test run with log Condition Used. Cosmetic condition as shown in photos. Scope of Delivery Godpoy H Hk Ajfx Anxjub - Test chamber TSS-70/350-A - Documentation (where available) Note Used machine, sale without warranty. Inspection can be arranged upon request. Loading and transport can be organized if required. Subject to prior sale and technical modifications. For any questions, please feel free to contact us.

Condition: new, Year of construction: 2020, End Milling Machine – Pertici ML200A - Brand new – Year 2020 The ML200 by Pertici Industries is an automatic vertical-axis end milling machine designed for processing aluminium and PVC profiles. The machine allows machining operations with angles from 90° to 22.5° and from 90° to 157.5°, ensuring precision and reliability during end milling operations. Heavy-duty electro-welded steel structure with high-rigidity cast iron bench, complete with sliding milling unit on precision-ground guide rods. Equipped with: Quick pneumatic cutter change system Gsdpey N S Ulsfx Anxoub Lubrication system 5 pneumatic clamping cylinders Three-phase motor 1.4 / 1.9 kW – 1400 / 2800 rpm Oil-pneumatic feed system for the milling unit Adjustable feed speed Profile support with vertical and horizontal clamps Anti-vibration feet User and maintenance manual Ideal machine for professional aluminium and PVC window and door manufacturing. Technical specifications: Motor power: 1.4 / 1.9 kW Power supply: 400V – 50Hz – Three-phase Motor speed: 6700 / 3350 rpm Maximum tool diameter: Ø 250 mm Tool bore: Ø 32 mm Maximum profile height: 130 mm Maximum profile width: 350 mm Maximum machining height: 145 mm Required air pressure: 6 – 7 bar Air consumption: 30 L/min Machine dimensions: Length (a): 1020 mm Height (b): 1700 mm Depth (c): 1410 mm Weight: 310 kg

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: Guedpfx Anex Dnb Ujxob • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. This unit is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Typical applications: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/350-A Temperature range: Warm chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Gsdpfx Ansy Hkgboxjub Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Precooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Features / Equipment: - CTS control panel with touch display - Microprocessor-controlled regulation and monitoring system - Program operation - Digital setpoint and actual value display - 2-zone system (warm and cold chamber) - Automatic transfer basket for shock tests Technical design: - Warm and cold chamber separated - Transfer basket system for rapid temperature change - Test chamber made of stainless steel - Insert shelf / wire rack - Viewing window in door - Water cooling connections available - Integrated control cabinet Dimensions: External dimensions (HxWxD): approx. 2335 x 940 x 1820 mm Installation dimensions (HxWxD): approx. 1990 x 940 x 1652 mm Internal dimensions (HxWxD): approx. 410 x 480 x 660 mm Weight: approx. 950 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points are carried out on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130. Gujdpfey Hkfdex Anxob This device is designed for thermal shock testing and is commonly used in industry, research, and quality assurance. Application fields: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min on average for shock test cycles (without radiant heat) Transfer rate: ≤ 15 min in the range -65°C to +200°C with 10 kg ICs Transfer time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 16.7 kW Nominal current: approx. 26.8 A Site-side fuse: 32 A slow-blow Connection: Cekon 32 Cooling system: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features and equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs) - Digital setpoint/actual value display - RS232 interface - 2 free switching channels for controlling test objects on-site - Fault alarm with floating contact (rated for up to 30 V-DC, 2 A) - EMC tested Technical design: - Hot and cold chambers - Transport basket with spindle drive - Test chamber / basket made of stainless steel, Material no. 1.4301 - Insert basket made of stainless steel wire - Pipe duct NW 50 with closing plug - Compressed air connection 1/4" male - Pressureless condensate drain R 1/2" internal thread - Safety door lock - Lockable door with window Dimensions as per installation drawing: External dimensions approx.: 2335 x 940 x 1820 mm Entry dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further data: Degree of protection: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh For your assurance as a buyer, the following procedures are performed on all offered chambers beforehand: 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented trial run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: Gjdoy Hkd Hepfx Anxeub - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 2017, operating hours: 19,500 h, machine/vehicle number: LC621, Used tetra Pack A3 speed 200 ml Prisma line for UHTTechnical Specifications & Performance DataThis used bottling line is a complete Tetra Pak A3/Speed V040 filling solution configured for 200 ml Prisma cartons. It is a second hand, industrial packaging line designed for high-quality beverage production with integrated downstream packing and date coding. The package also includes a comprehensive UHT processing block to support aseptic filling operations.Main filler: Tetra Pak A3/Speed V040 (carton filling technology)Primary format: 200 ml Prisma cartonsSpeed: 24.000 BPH ( 200 ml Prisma).Accumulator: Tetra HELIX ACHX30-0700-100MLine control: Tetra Pak Line Controller 30 PLUSStraw application: Tetra Pak Straw ApplicatorConveyors: Complete Tetra Pak conveyor systemPacking – wrap around: GAMPACK WB90HSPacking – case/carton: GAMPACK case packerDate coding: Domino date printerWorking hours: 19,500 (line)Included UHT process equipment:Tetra Pak Homogenizer 400Cooling tank 2,000 LTetra Pak Aseptic Tank 30,720 L with Tetra AlsafeComplete Tetra Pak VTIS UHT processing unit (pumps, valves, heat exchangers)Tetra Pak CIP satelliteAdvanced Automation & Control SystemsThe line is coordinated via the Tetra Pak Line Controller 30 PLUS, ensuring synchronized operation from filling through secondary packaging. Integrated automation supports stable product flow using the Tetra HELIX accumulator, while the Domino printer provides in-line date coding. System-wide interlocks and operator control points contribute to efficient, repeatable changeovers and robust process control suitable for aseptic beverage packaging.Production Line Integration CapabilitiesEngineered for cohesive end-to-end operation, the line links the Tetra Pak A3/Speed V040 filler with straw application, conveyors, accumulation, and both wrap around and case packing. The configuration facilitates smooth transitions between unit operations for stable throughput. It is purpose-built for 200 ml Prisma cartons and integrates easily into existing industrial packaging layouts for beverage production, whether as a standalone carton line or connected to upstream processing utilities.Machine Condition & Maintenance HistoryThis second hand Tetra Pak A3/Speed V040 carton filling line shows 19,500 operating hours. Presented as a complete used bottling line package with downstream packing and UHT processing equipment, it is suitable for facilities seeking proven, production-ready carton packaging machinery.Operational Performance & VersatilityDesigned for aseptic carton packaging, the system supports UHT-treated beverages, leveraging the VTIS UHT unit, homogenization, aseptic storage, and CIP for hygienic integrity. The straw applicator complements the 200 ml Prisma format for on-the-go consumption. Downstream GAMPACK wrap around and case packing provides flexible secondary packaging options, and the Domino date printer ensures... Gujdoy Egm Ijpfx Anxjb

Condition: used, Year of construction: 2013, Suitable for automatic tooth flank grinding on both sides of carbide-tipped circular saw blades. Accesories: full fairing coolant system Automatic central lubrication. Measuring system for measuring saw blades. Control panel with LCD color display. DNC service. Alphanumeric keyboard. Grinding speed and grinding path depending on the tooth surface, can be adjusted as required. 2 grinding wheel mounts Coolant level monitoring Automatic grinding wheel compensation Prepared for robot operation with automatic loading door oil pan 2 x saw blade magnet holder >Ø 320mm, >Ø 180 mm 1 centering ring. Circular saw blade diameter: 200 - 840mm Circular Saw Bore Diameter: from 16 mm Tooth pitch: 6 - 180mm grinding path: up to 25 mm tangential relief angle: 0 to 10 degrees max. grinding wheel diameter: 125 mm Grinding wheel bore diameter: 32 mm Grinding spindle variable: 1600 - 5500 rpm, Gjdpfsv Sbmqex Anxsub Connected load approx.: 8kVA (400V / 50Hz) Dimensions W x D x H =: 2770x1900x2045mm mass: approx. 4700 kg colour: Gray

Condition: used, Year of construction: 2010, Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light saw diameter: 80-840 mm Bore diameter: from 10 mm sheet thickness: < 8 mm Tooth pitch: 6 - 120 mm Cutting length: Godpfx Aowp Eblsnxsub

Condition: used, Year of construction: 2019, Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass. Accessories: Total enclosure, Coolant system, Equipment for robot operation with automatic loading door ND 230 loader Measuring device for measuring saw blades Chip breaker grinding attachment Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm. Grinding speed and grinding path stepless adjustable for each machining surface on the tooth. Automatic central lubrication Software package for oscillation grinding at rake and clearance angles Automatic shut-off flap Automatic fire extinguishing system Electrostatic oil mist separator N281 Measuring tool Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180 Gjdpfxoyvgf Ds Anxsub Sawblade holder with guide bushing Ø 16 mm Saw holder >ø320 Grinding wheel mounting flange for chip breaker Centering ring for mounting bolt Ø 16 mm for saw bore Ø 32 mm Centering ring for mounting bolt Ø 16 mm for saw bore Ø 40 mm Centering bolt Ø 10 mm Machine light Sawblade blow-off pistol Data input station DES 400 3 loading trolleys with 30 mm mandrels Oil drip tray Automatic central lubrication. Saw blade diameter: 200 - 840 mm Bore diameter: from 16 mm Sheet thickness: up to 15 mm Tooth pitch: from 6 to 180 mm Cutting length: up to 25 mm Rake angle: from - 35 ° to + 20 ° Clearance angle: 0 ° - 25 ° Angled grinding on the back of the tooth: up to 45 ° Angled grinding on the tooth face: up to 30 ° Angled grinding on the negative tooth face: up to 30 ° Tooth height difference: any Grinding wheel diameter: Max. 200 x 32 mm Dimensions W x D x H: 2770 x 1900 x 2058 mm Weight: 4700 kg Connected load: 8.7 kVA (400 V / 50 Hz) colour: gray RAL 7045 / gray RAL 7047

Year of construction: 2010, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure, Extraction N183, Cooling and cleaning device for dielectric, Automatic fire extinguishing device, Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading 1 set of gripper fingers for workpiece automation HSK 63/SK40 Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A, 1 exchange element with flange, 1 x flushing kit, Test bar X axis travel: 440 mm B-axis: +/- 15° Gedpeycckcefx Anxjub Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 workpiece length max.: 200 mm Workpiece diameter max.: 250 mm workpiece weight: 15 kg Connected load approx.: 6.7 kW 400V/50 Hz Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1

Condition: good (used), Year of construction: 2005, Clamping force: 200 t Screw diameter: 50 mm Screw dia 2 : 22 mm Distance between tie bars V: 580 mm Gedpoyz Tmysfx Anxsub Distance between tie bars H: 580 mm Type: Multicomponent (2K injection) Drive: Hydraulic 2x hydraulic valve

Condition: used, Year of construction: 2018, operating hours: 7,610 h, total height: 1,650 mm, total length: 4,400 mm, total width: 1,000 mm, Colour: Grey Weight: 2.500 kg Price: On request - Details: - └ Description: Machine currently still has a malfunction to be fixed - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Operating hours: 7610 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit Gsdpfx Aoy Ewv Tenxeub - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 10.3 - Fuse [A]: 16 - Transport dimensions: 4400mm x 1000mm x 1650mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, functionality: fully functional, fuel type: hybrid, color: other, overall weight: 46,000 kg, Year of construction: 2026, *All of our products are carefully manufactured and have a 1-year warranty! *Installation and Operator Training are FREE! FTC-200-S Mobile Cone Crusher (With Screen); It consists of a feeding bunker, cone crusher and stock conveyor belt and generator. FTC-200-S Mobile Cone Crusher (With Screen), which is moved by remote control on a tracked chassis, successfully completes all commands given by the user by moving on its tracks in all kinds of difficult climate conditions and rough terrain. FTC-200-S Mobile Cone Crusher (With Screen), is precisely designed and carefully manufactured for stone crushing and is the leading mobile cone crusher in the sector with a crushing capacity of 100-200 T/H per hour. Godpfxjyzw R No Anxeub FTC-200-S Mobile Cone Crusher (With Screen) does not require an extra infrastructure as a production method, it is moved by remote control as mobile and adapts to all difficult terrain conditions. TECHNICAL SPECIFICATIONS: Model: FTC 200-S Crusher Type: Cone Crusher Vibrating Screen Size: 1300x3000 mm Production Capacity: 100-200 T/H Maximum Feed: 185mm Total Power: 300 kVA Weight: 46,000 Kg PLEASE CALL US FOR DETAILED INFORMATION!!!

Condition: new, Year of construction: 2026, power: 22 kW (29.91 HP), pressing force: 200 t, stroke length: 800 mm, table width: 750 mm, table length: 1,000 mm, throat depth: 400 mm, Equipment: CE marking, documentation/manual, safety light barrier, 200 Ton C-Frame Hydraulic Press – CHCP 200 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 200 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, is designed for demanding production conditions, offering a high tonnage capacity, reinforced heavy-duty body structure, and superior performance. Key Advantages - Heavy-duty, high-strength steel frame construction - Stable operation with vibration-relieved structure - High precision (≤120 microns/meter) - PLC-controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life and low maintenance cost Application Areas - Heavy-duty metal forming - Deep drawing and stamping applications - High-tonnage die pressing - Cutting and punching operations - Automotive, defense, and heavy industry Standard Features - Stress-relieved, steel frame construction via vibration method - PLC control and touch panel - Argon welding applications - Certified welding in compliance with EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and perpendicularity tolerance in accordance with ISO & DIN standards (≤120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic centralized lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 200 - Press Force: 200 Tons - Stroke: 800 mm - Throat Depth: 400 mm - Table – Ram Distance: 900 mm - Table Size: 750 x 1000 mm - Press Depth: 1500 mm - Press Width: 750 mm - Table Height from Floor: 1000 mm - Total Height: 2900 mm - Main Cylinder Diameter: Ø300 mm - Motor Power: 22 kW - Weight: 11,500 kg Guodpfx Anoyzb Edexjb General Information - Country of Manufacture: Turkey - Warranty: 24 Months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: good (used), Year of construction: 2004, Demag ergotech extra 500-200 (2004) Guodjyyzuvspfx Anxsb