Used Hamos Eks 1031 for sale (169)

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 6,150 mm, construction height: 2,830 mm, operating hours: 677 h, fuel type: electric, mast type: triplex, Manufacturer + model:STILL EK-X 48 Mast:3F6300 ID:25043.7302 Cat.:Demo Mast:3F Lowered height:2830 mm Lifting height:6150 mm Capacity:1000 kg Platform height:6300 mm Picking height:7900 mm Cabin width:1200 mm Year:2018 Hours:677 hours Capacity:48 v / 620 ah Options:Very unique !! - Elec in HEIGHT adjustable dashboard - Walk-through platform for use of EURO pallets - Original STILL safety gates (with security !! ) - 2 x Bleu spot !! Nwjdpfxey Itdxo Aqvog complete LIKE NEW !!

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 10,500 mm, construction height: 4,730 mm, operating hours: 1,844 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 308 Mast: L + i - 3F10500 ID: 24033.5995 Category: Used Mast: 3F Lowered height: 4730 mm Lifting height: 10500 mm Capacity: 1000 kg Platform height: 10500 mm Picking height: 12100 mm Cabin width: 1500 mm Year: 2018 Operating hours: 1844 hours Battery capacity: 48 V / 620 Ah Nwedsy Ir Upjpfx Aqveg Options: - Triplex mast – full free lift (FFL) - PSA (Sick) - Induction / wire guidance Condition: LIKE NEW

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 10,500 mm, construction height: 4,730 mm, operating hours: 1,201 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 308 Mast: L + i - 3F10500 ID: 24033.5993 Category: Demo Mast: 3F Lowered height: 4730 mm Lifting height: 10500 mm Nwsdpfx Aqey Ir Uijveg Capacity: 1000 kg Platform height: 10500 mm Picking height: 12100 mm Cabin width: 1500 mm Year: 2018 Operating hours: 1201 h Battery capacity: 48 V / 620 Ah Options: - Triplex mast – FFL - PSA (Sick) - Induction / wire guidance Machine LIKE NEW

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 10,500 mm, construction height: 4,730 mm, operating hours: 1,629 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 308 Mast: L + i - 3F10500 ID:23123.5000 Category: Used Mast: 3F Nsdpfx Aey Ir Tfsqvswg Lowered height: 4730 mm Lifting height: 10500 mm Capacity: 1000 kg Platform height: 10500 mm Picking height: 12100 mm Cabin width: 1500 mm Year: 2018 Hours: 1629 hours Battery capacity: 48 V / 620 Ah Options: - Triplex mast – FFL - PSA (Sick) - Inductive / wire guidance CONDITION: LIKE NEW!

Condition: good (used), machine/vehicle number: 91527467, Year of construction: 2007, operating hours: 4,871 h, Jungheinrich EKS 110 Order Picker with New Battery Year of manufacture (machine): 2007 Operating hours: 4,871 h Year of manufacture (battery): 01/2023 Capacity: 620 Ah at 24 Volts Load capacity: 1,000 kg Lift height: approx. 1,830 mm to top edge of forks Nwjdeyt Iyqopfx Aqveg Platform height approx. 1,180 mm Fork length: 1,200 mm Overall dimensions approx.: 810 mm wide; 2,900 mm long Weight approx.: 1,900 kg including battery -Power steering -360-degree steering - Very good tires, handles minor uneven surfaces and inclines with ease Includes charger The machine is in perfect working order and ready for immediate use. Affordable delivery by specialist company possible. Check out our other listings as well. We always have a large selection of high- and low-lift trucks and forklifts in stock. Need spare parts for your forklift or stacker? Just get in touch with us.

Condition: used, 🧰 Product Features • Manufacturer: SSI Schäfer • Model: EK 113 • Condition: used • Material: Polystyrene • Color: Blue • Volume: 4.1 l • Net weight: 0.34 kg • External dimensions: 274 x 174 x 95 mm • Internal dimensions: 268 x 168 x 90 mm • Stackable: Yes • Dimensionally stable: Yes Nsdpsx Ig R Eofx Aqvjwg 💰 Price €1.90 net excl. VAT. Price from 100 pcs: €1.70 net excl. VAT. • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment Constant stock of over 5,000 linear metres of pallet racking from numerous manufacturers (Technical data, specifications and prices subject to change and errors excepted, intermediate sale reserved! See our terms and conditions, all prices exclude VAT ex works.)

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, We offer this ready-for-use Boschgraaf DL50 1500 EK 1200, year of manufacture 2020. Manufacturer: Boschgraaf Model: DL50 1500 EK 1200 Type: Boschgraaf EK 1200 DL 50 1500 Year of manufacture: 2020 Condition: ready for use Njdpfx Aex Rvi Aoqvowg If you have any questions or would like more information, please feel free to send us a message or call us. The machine has been tested and is fully operational. Very neat and solid access sluice/hygiene gate/turnstile/access control with hand and sole disinfection. Brushes are as good as new. Equipped with automatic detection for empty disinfectant and an external storage tank for sole cleaner disinfectant. Both electrically and mechanically in like-new condition. Video of operation available on request. Transport can be arranged in consultation.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, overall weight: 4,190 kg, fuel type: diesel, nominal power (apparent): 440 kVA, The unit is used as a backup and is only operated occasionally. Nwsdpfxoy Ufpao Aqveg

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. Nedpechuvrjfx Aqvewg For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: new, Year of construction: 2026, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant Nedegl Nlmepfx Aqvjwg . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Nodpov Rpxlofx Aqvjwg Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: new, Year of construction: 2026, Briquetting press NEM 900: production time appr. 5 months for briquetting aluminum chips Throughput: up to maximum 320 kg / h * more details after a free test with heard material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical specifications: Total connection: approx. 31 kW In continuous operation approx. 22 kW 400 volts / 50 Hz / 3 phases Pump: 120 + 60 liters per minute Silo: 1 m³ Silo rollers: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm lxwxh Weight: 2250 kg. Hydraulic pre-compression via slide Nwjdpfx Asgfm Ryoqvjg Main press cylinder Vertical cylinder Above for connecting a cooling unit . One and the source material - max.span: 18 mm - Excessive temperature: temperate room at at least + 5 ° C. - max.weight on agitator: 200kg. - The loading must be free of metals and mineral impurities such as sand, stones, etc. This on the pressing tools and / or responsible wear can result

Condition: new, Year of construction: 2026, Production time of the machine approx. 3.5 months Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to faults + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later) * cools the press tongs (important from 3.5 hours) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compressor chamber + € 1,975 net recommended for light starting materials such as wood shavings Product code: 84793010 Briquette diameter: 65 mm Front bush: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Output (depending on material): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW Nwodpjffh Atsfx Aqvjg 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 qbm Pump: 37 liters Hydraulic pre-compressor Cooling press tongs option: yes, with special accessory Coolable press tongs Cooling of the pressing tongs via water tank (to be procured on site) Hydraulic oil cooling option: yes Fill level monitoring option: yes Briquette option: yes (depending on material) CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Chip length maximum 15 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: good (used), Clean air extraction Used machine, good condition Pictures to follow Nodpsrb D Nefx Aqvewg Mobile Jet 160, Connection 160, Fan 2.2 kW Air flow rate 1850 m³/h / 400 V

Condition: as good as new (ex-display), Year of construction: 2025, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Nedpsdwktkofx Aqvowg Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: as good as new (ex-display), Year of construction: 2024, The ideal machine for shredding cables, Nsdpogmfa Ajfx Aqvjwg including optimized cutting geometry, approximately 9 operating hours. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 pieces, 40x40mm, multi-rotational, Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically actuated slide Screen hole size optional (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxbxh) approx. 1737 x 1167 x 1650 mm The following options are available at an extra cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for four-sided segmented base + €2,170 net (prevents the slide from blocking. Recommended when shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise the shredder by 30 cm (preparation for a conveyor belt) + €1,980 net - Angle conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with photos and videos.

Condition: used, Year of construction: 2017, functionality: fully functional, Operational Haitian MA3800 - MA2500 - MA2000 - MA1600 injection moulding machines Nwedpfjy Iydxsx Aqvsg

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, The line includes: Nwedpfx Aqey Rqmveveg 1. SEALPAC A7 tray sealer (year of manufacture: 2010) Number of cycles: up to 15 cycles/min Output: up to 100 containers/min (vacuum/gas mode; higher output in sealing-only mode) Weight: 1,700 kg Compressed air: min. 6 bar Power supply: 3 × 400/230V – max. 8 kW Technical condition: very good 2. KWS5472BW3D automatic checkweigher Designed for weighing individual loads Precise weight compliance control Fully integrable with the production line 3. CASSEL metal detector High detection sensitivity Protection against metallic contaminants Industrial-grade construction, suitable for continuous operation Line advantages High efficiency and process repeatability Operation in both MAP and standard sealing modes Robust, proven machinery from reputable manufacturers Low operating costs The line is ready for immediate operation

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale: Complete Equipment for Braided Cord Production Included Machines & Accessories: - 2 fully operational knitting machines for producing round cords (capable of simultaneously producing 6 cords) - Industrial yarn winding machine - 2 yarn stands for holding over 24 yarn cones Technical Specifications: Year of manufacture: 2020 Voltage: 380 V, 50 Hz Weight: 110 kg Machine Features Knitting Machines: - One machine is equipped with 4 needle heads, the other with 2 needle heads, enabling production of a total of 6 cords simultaneously. - Automatic stop function: If the yarn breaks or a needle is damaged, the affected needle head stops automatically. - Needle heads for cord production: 4 heads with 4 needles each—for fine knitted cords with approx. 3 mm diameter; 2 heads with 6 needles each—for cords with 5–6 mm diameter - Variants with 3 to 18 needles can be ordered and replaced from the manufacturer. Industrial Yarn Winding Machine: - Winds a skein in approx. 1 minute. - Cross-winding for even yarn distribution. - Automatic stop at the end of the cord. Operation & Control: - Speed display for both needle heads and the take-up unit. - Each needle head can be switched on or off individually. - Adjustable speed Nwodpfxsy Sng Ne Aqvjg Scope of Delivery & Additional Equipment: - 2 knitting machines with a total of 6 needle assemblies - Yarn winding machine - 2 yarn stands for over 24 yarn cones - Operating manual included - Spare needles (approx. 50 pieces) are included Location & Collection: The machines are located in Munich and are ready for collection. Upon pick-up, we are happy to provide instruction on operation. The stated price applies to the complete set (all 3 machines + yarn stands). Individual sale possible, price negotiable. If interested or for further questions, please get in touch!

Condition: like new (used), Year of construction: 2005, operating hours: 7,000 h, ONLY PRODUCED FOR 7000HRS Overall Belt width - 660mm Effective Belt width - 610mm Belt length/Tier - 13.28 Effective Belt length - 478.08 Effective Belt area - 245.95m2 Tiers - 36 Nwsdpfx Aqsrfclqevsg Tier pitch - 145mm Maximum product height - 73mm Drum Diameter 2905.76mm EVAPORATOR Duty - 210kw Evap Temp - -40c Installed power - 32.55kw Infeed Height - 800mm Outfeed Height - 6200mm Infeed/Outfeed Length - 200mm Full CIP covering all areas. Absolutely mint condition. GEA GRASSO PLANT COMPLETE WITH AIR COOLED CONDENSOR 240KW DUTY. AGAIN ONLY 7000HRS RUN TIME REVERSE CYCLE DEFROST AFTER 120HRS WITH WATER SPRAYBARS. More photos available through WhatsApp

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,000 mm, total length: 1,100 mm, total height: 550 mm, input voltage: 220 V, working width: 600 mm, infeed width: 650 mm, spindle motor power: 1,100 W, warranty duration: 24 months, power: 1.2 kW (1.63 HP), Equipment: CE marking, emergency stop, type plate available, DESTEK MAKİNE is the first and only company to establish a production facility in its field in Türkiye. All machines and hand tools we sell are produced in our own workshops using state-of-the-art CNC machinery from design to final product. With the strength we gain from production, we have been providing products and services to our valued customers in the standing seam roof & facade cladding sector for over 10 years. By conducting a thorough needs analysis with a customer-first approach, we bring all global technological innovations to our country simultaneously. Therefore, our vision can be summarized as: “ Whatever is Manufactured in the World, DESTEK MAKİNE can Produce the Same or Even Better ” With a solution-oriented engineering approach, an experienced team of experts in the field, and a reliable service network, we are here whenever you need us. Our company guarantees 100% customer satisfaction. Our commitment to quality is certified by: CE Conformity Certificate ISO 9001 Njdowzzlwopfx Aqvewg ISO 14001 ISO 10002 ISO 45001 Every manufactured "DESTEK" standing seam machines goes through delicate tests. "DESTEK" Features - Standard standing seam height 25 mm - There is no problem of oil canning when working with the machine. - Automatic Cutting Guillotine (Standart) - Ribbing Attachments (Standart) - Dijital Counter (Standart) - Cabled Remote Controller (Standart) - Emergency Stop Button (Standart) - Forward and backward button (Standart) - Wrench Sets that will be required during use (Standart) - Weight: 260 kg - You can transport with small cars - You can lift it to the roof easily - You can seperate it to four pieces for carrying easily (Standart) - Material width adjusment (180 mm – 650 mm) (Standart) Please contact us for more information and prices.

Condition: excellent (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, empty load weight: 8,000 kg, machine base height: 3,940 mm, spindle motor power: 4,000 W, milling length: 5,920 mm, Döküm Gövde (LCD) Dokunmatik ekran ve CNC-Kontrol unitesi Otomatik CNC- Rektefiyeleme sistemi İnterpilasyon işlemi ile otomatik silindir rektefiyeleme özelliği (Opsiyonel) X-Y-Z Eksenler AC/Servo motor kontrol Elektornik el çarkı X-Y-Z eksenleri için (Hız ayarlı) Hassas elektronik cetvel (X,Y,Z eksenler) Silindir rektefiye ve Yüzey tarama işlemleri similasyon özelligi (Opsiyonel) Hareketli rektefiye başlığı değiştirme robotu (Opsiyonel) Fener mili aşağı ve yukarı hareketi hız ayarlı Elektonik hız ayarlı fener mili (Elk.El çarkı ile fener mili kontölü) Yüzey tarama sırasında tabla hız ayarı değiştirme sistemi Hareketli LED aydınlatma sistemi. Hazır katerli elmas sistemi Dik sütun kızak koruma perdesi Nwsdpfx Aexpwfaeqveg Dik sütun(Z-Eksen) V kızak sistemi Tabla kızakları(X-Y eksen) Linear Kızak ve otomatik yağlama sistemi. Elektrik paneli iç aydınlatma Rektefiye başlığı bilyali sistem Fener mili aşağı ve yukarı hareketi bilyali vidali mil ve otomatik yağlama Tabla ileri-geri ve sag-sol hareketleri bilyallı vidali mil ve otomatik yağlama(X-Y Eksenler) Zaman ayarlanabilir otomatik yağlama sistemi Elektonik el çarkı Hız ayarlı ve 3 eksen kontrollü (X,Y,Z) İnternet Erişimi ve uzaktan erişim İndustry 4.0 uyumluluk Dik sütun servis merdiveni

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Complete 'Bag-in-Bag' forming system, previously used to produce multipacks of crisps. System comprises of: 1 x Feed hopper and steps/gantry. 1 x Comek s.r.l. infeed swan-neck / 'Z' conveyor. 1 x Comek s.r.l. / Propema VPB 400 vertical form, fill and seal bagging machine. Serial number – 0516. Date of manufacture – 2014. Sealing jaws - 380mm horizontal & 620mm vertical. Film width - up to 810mm wide. 1 x Markem Imaje SmartDate X65 128mm thermal transfer printer. Serial number – GP21062420 & GJ21063019. Date of manufacture – 2021. 1 x Flash label applicator (never used / required for seller's products). 1 x Hole punch (3mm) to help deflate the multipack bags into large boxes. 1 x Comek s.r.l. outfeed inclined conveyor. Belt width - 400mm wide. Conveyor length - 1800mm long. 1 x 1.2m diameter stainless-steel Lazy Susan / rotary packing table. Height - 750mm (height-adjustable feet). Njdpfeyvac Aex Aqvswg This system was producing bulk multipack bags of 3 x different flavours of bags of crisps. Speed - up to 18 packs/minute. Footprint of system - 7.3m long x 2.7m wide x 3.5m high (infeed conveyor to lazy susan).

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 22-009, Rotary spray cleaning machine YM-850 Nsdpfx Aqstwmxyjvjwg The YM-850 rotary spray cleaning machine is designed for efficient cleaning of industrial parts with hot pressurized water and biodegradable cleaning agents. This machine has very low running costs and low consumption. The machine frame and body are made of high quality corrosion-free stainless steel. This machine is the right choice for cleaning oil, grease and production residues on the surface of workpieces as well as for corrosion protection applications. The YM machine has stainless steel pump, spray nozzles, heating elements and motorized basket design as standard. - Spray cleaning system for small to medium batch sizes, - for workshop, maintenance or intermediate cleaning - Cleaning with hot water - Spray cabin as a top loader Technical details: Basket diameter: 700 mm Loading height: 380 mm Tank capacity: 120 liters Pump pressure: 8 bar Heating: 7.5 kW maximum loading weight: 120 kg Connection: 220-380 volts - 3 phases Timer: 0-30 mins Thermostat: 0-60 C° Stainless steel body: 430 AISI Filter cups: 2 pieces - 2-3 mm perforation Internal filter: 100µ

Year of construction: 2011, condition: excellent (used), machine/vehicle number: MBUT100A, Telemecanique / Schneider Canalis KNT - 100A busbar system - complete package Nsdpjrwiydofx Aqvswg Stock approx. 85 running meters Canalis KNT 100 ED4204 + ED4306 100A Ampere - 5 poles - L1 L2 L3 N PE Voltage Ui max. 500V, frequency 50 - 60 Hz Bar length: 25x 3m 9x 1.5m incl. connectors, various end pieces and brackets, flexible corner connectors and several outlet boxes Dismantling was carried out by a qualified electrician. Busbars are in very good condition Only for sale complete Stock items, immediately available ----- old Kloeckner Moeller BD1 system still available ! Busbars, corner parts, feeders and outgoing feeders for the old Kloeckner Moeller BD1 / BD 1 system available !!! Please inquire ! Are you also looking for a crane system?