Briquetting pressmütek Systemtechnik
MPP 60
Briquetting press
mütek Systemtechnik
MPP 60
Year of construction
2025
Condition
New
Location
Neckartailfingen 

Show images
Show map
Machine data
- Machine type:
- Briquetting press
- Manufacturer:
- mütek Systemtechnik
- Model:
- MPP 60
- Year of construction:
- 2025
- Condition:
- new
- Operating hours:
- 6 h
Price & Location
- Location:
- Grienweg 38, 72666 Neckartailfingen, Deutschland
Call
Details about the offer
- Listing ID:
- A5565738
- Update:
- 02.10.2025
Description
Our best-selling briquetting press, the classic.
+ Tried and tested, simple technology for extremely low susceptibility to errors
+ 25 years of experience, further development and know-how
+ Several thousand machines in use with satisfied customers
+ Top price-performance ratio
Options for an extra charge:
* Surcharge for the level indicator that enables automatic operation + € 995 net
* Surcharge for large pre-compression chamber + 980 €
(recommended for light material like straw)
Briquette diameter: 50 mm
Front bush: 50 mm
Codpfx Ajgl Nlmsbcjrh
Briquette stroke max .: 40 mm
Briquette lift opt .: 40 mm
Throughput (depending on material): 30-60 kg / h *
* depending on the bulk weight
* based on a bulk weight of 200 kg per cubic meter
.
Motor power: 5.5 kW
400 volts / 50 Hz / 3 phases
Length: 1680 mm
Width: 1100 mm
Height: 1500 mm
Weight: 680 kg
Oil volume: 110 liters
Silo diameter: 1000 mm
Silo content: approx. 0.7 square meters
Pump: 27 liters
Hydraulic pre-compressor
Option cooling pressing tongs: no
Hydraulic oil cooling option: yes
Level monitoring option: yes
CE compliant
.
Requirements for the raw material:
- The moisture content (atro) must be between a minimum of 6 and a maximum of 18%
- Maximum chip length 15 mm
- Installation temperature: temperature-controlled room at at least + 5 ° C
- The customer must insure himself against loss of hydraulic oil
- The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear
+ Tried and tested, simple technology for extremely low susceptibility to errors
+ 25 years of experience, further development and know-how
+ Several thousand machines in use with satisfied customers
+ Top price-performance ratio
Options for an extra charge:
* Surcharge for the level indicator that enables automatic operation + € 995 net
* Surcharge for large pre-compression chamber + 980 €
(recommended for light material like straw)
Briquette diameter: 50 mm
Front bush: 50 mm
Codpfx Ajgl Nlmsbcjrh
Briquette stroke max .: 40 mm
Briquette lift opt .: 40 mm
Throughput (depending on material): 30-60 kg / h *
* depending on the bulk weight
* based on a bulk weight of 200 kg per cubic meter
.
Motor power: 5.5 kW
400 volts / 50 Hz / 3 phases
Length: 1680 mm
Width: 1100 mm
Height: 1500 mm
Weight: 680 kg
Oil volume: 110 liters
Silo diameter: 1000 mm
Silo content: approx. 0.7 square meters
Pump: 27 liters
Hydraulic pre-compressor
Option cooling pressing tongs: no
Hydraulic oil cooling option: yes
Level monitoring option: yes
CE compliant
.
Requirements for the raw material:
- The moisture content (atro) must be between a minimum of 6 and a maximum of 18%
- Maximum chip length 15 mm
- Installation temperature: temperature-controlled room at at least + 5 ° C
- The customer must insure himself against loss of hydraulic oil
- The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear
DOCUMENTS
5565738-01.pdf (PDF)5565738-02.pdf (PDF)
Seller
Note: Register for free or log in, to access all information.
Registered since: 2005
Send inquiry
Telephone & Fax
+49 711 5... show
Your listing has been deleted successfully
An error has occurred