Used Homag Softforming Single-Side Edge Bander for sale (25,888)

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount Kdjdpfxoy A I Sgs Aayek - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: excellent (used), functionality: fully functional, Equipment: CE marking, documentation/manual, double-sided, Additional equipment: Seperating agent spray device on top/bottom / Double Hogger Longitudinal/Cross: 6.6 kW with electropneumatic control / Gluing Unit A3 - 2 rolls / Profile Trimming Unit FF12 on top/bottom with motors at 12000 rpm / Finish Unit FA11 on top/bottom / Stepless stop cams with maximum cam projection of 25 mm / Standard Trimming Unit SF20 6.6 kW / Rough Trimming Unit 0.55 kW PUR OTT 2kg Melting Station / Machine Benefits Technical Machine Benefits Workpiece thickness: 12 - 40 mm / minimum workpiece size (lxw): 250 x 240 mm / maximum workpiece size (lxw): 2500 x 1200 mm / maximum workpiece weight: 50 kg Roller material edge thickness: 0. 4 - 3 mm / maximum edge cross section (plastic): 135 mm² / maximum edge cross section (veneer): 100 mm² / maximum roller diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edge up to 0. 6 mm /up to 30 m/min for thick edge up to 3 mm Ksdpfxexwui Es Aayodk Cross processing speed: up to 30 m/min for panel sizing/ up to 20 m/min for edge processing Minimum workpiece gap: 500 mm

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, workpiece height (max.): 90 mm, workpiece width (max.): 3,200 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units on the left side: 5 Milling unit (AS10) Double finishing cutter, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (rough) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Kedpoyq Avhsfx Aayedk Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm FEATURES Feed chain with carriers Pressure applied via rubber belt Panel guide rails with NC positioning Edge roll magazine with 6 positions Hot melt adhesive system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on upper cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, edge thickness (max.): 20 mm, controller model: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hot melt adhesive tank, pre-press for hot melt adhesive Edge bonding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sanding machine (1 motor) Unit 7: Belt sanding machine (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Kdodpfxoyttrxe Aaysk Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed tracks: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ('as seen and approved') on the basis of photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination location. External reference: 6561

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 0-200-24-6287, functionality: fully functional, input voltage: 400 V, input current: 56 A, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 78/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2001 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application Ksdpfx Aeyv Da Hoayjdk - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x4kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN21, with NC-axis positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: excellent (used), LINE of Double-Side Sizing-Milling & Edge Banding (also "SOFTFORMING") with automatic handling. Max. panel thickness 100 mm. Composed by the following machines: Kodpfett Dqpex Aaysdk W05025A) Automatic LOADER (portal / gantry) "MAHROS" Mod. Brush W05025B) Double-side Sizing and Edge Bander "HOMAG" Mod. KFL 620/23/QE/30 (softforming) SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE BANDING PART (for each side): Glueing Unit (EVA glue with pre-melter) Edge coils supporting unit (No. of reels) 1 pressure zone for both STRAIGHT and SOFTFORMING Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) Fine Trimming Unit (2 x 0,55 KW) Corner-rounding unit FF12 (4 motors) WD70 Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11 W05025C) Automatic UNLOADER-STACKER (portal / gantry) "MAHROS" Mod. Brush

Condition: excellent (used), FULL LINE of 4 Side Sizing-Milling & Edge Banding (also SOFTFORMING), through-feed drilling and splitting of panels. Complete with fast automatic handling. Composed of the following machines: A) Loader (Bridge-Frame) "RBO (BIESSE)" Mod. Winner C (1) B) 1st Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB1 11.0 Softforming C) 1st 90° Turning device (Lengthwise to Crosswise) "RBO (BIESSE)" Mod. GPK-1 Kdedpfx Aaottgy Hoyjk D) 2nd Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB 2 9.5 E) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (straight or Crosswise to Lengthwise) F) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) G) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) H) 3rd 90° Turning device "RBO (BIESSE)" Mod. GPK-3 (straight or Crosswise to Lengthwise) I) Splitting Saw (Splitter) Lengthwise "GM (for BIESSE)" Mod. Split 4-84 LT L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner SC (2)

Condition: excellent (used), DOUBLE-SIDE EDGE BANDER Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 12 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Numerical Control ICOS OPEN Feeding speed (adjustable) m/min 6 - 30 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space Glueing Unit (Hot Melt Glue) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 2 Snipping (end-cutting) unit 08.42 (KW 0.66 x 2) 0°-25° Fine Trimming unit 08.055 (KW 1 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612 Free space (to add a Grooving Milling Unit) Kodpfx Aed Rcigoayjdk

Condition: excellent (used), DOUBLE-SIDE EDGE BANDER - Min/max edges (band) thickness in rolls mm 0,3 - 3 - Min/ max panels thickness mm 12 - 40 - Min /max working width mm 250 - 2500 - Numerical Control: Power Control PC 22 Kdjdpewk Hp Tsfx Aayok - Feeding speed (adjustable) m/min 10 - 32 - Top motorized pressure belt - Anti-sticking liquid spraying unit - Pre-Milling Unit (Vertical joint trimmers) 2 x Kw 4 at 9.000 RpM - Glueing Unit (Hot Melt + Quick Melt system): A3 - Pressure Zone (manual adjustment): "A" - Edge coils supporting unit with N. 2 coils - Snipping Unit: HL 84 (2 x Kw 0,22 at 12.000 RpM) - Fine Trimming Unit (2 x Kw 0,4 at 12.000 RpM) - Finish processing unit (Glue scraper + Buffing unit): FA 11 - Spraying & polishing unit

Condition: used, Year of construction: 2019, Smart Touch Numerical Control with Sintra HD Software Panel height 10 - 60 mm Kodor Ip Sdepfx Aayedk 22 mm solid wood Pvc / Abs mm 3 Feed speed up to 25 meters / min Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Motorized and electronically adjustable panel support guide by C.N. Side roller conveyor with idle wheels for panel support ADZ-700 anti-adhesive group Rectifier unit with 2 electronically adjustable motors by C.N FI-502 Lamps to heat the edge of the AdIRL-700 panel Reel holder plate at 1 position Gluing unit for EVA hot melt glue with QM-705 glue pot Additional glue tank Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. Anti-adhesive group End trimming unit with 2 IN-801 motors Offset trimming / gleaning unit with 2 motors electronically adjustable by C.N RF400 PRO-NESTING KIT for gleaning unit Non-stick group Rounding unit with 2 multifunction motors (gleaner + rounder) AR30 NC LPT-700 non-stick liquid application system Electronic edge scraper unit electronically adjustable by C.N RB400 PRO-NESTING KIT for edge scraper group RCC-701 glue scraper unit Brush group "SP-501" "PH-700" hairdryer group

Condition: used, Year of construction: 2004, PLC control Panel height mm 10-60 Solid mm 15 Pvc / Abs mm 3 Feed speed up to mt/min 12-18 Working height adjustable by PLC Adjustable panel support guide Side roller conveyor with idle wheels for panel support Rightening unit Roll holder plate Kdsdpfxeu Tyx Aj Aaysk Gluing unit for EVA glue with pre-melter Edge pressure unit End trimming unit Trimming unit with overlapping motors Tiltable chamfering unit Rounding unit with 4 motors Edge scraper unit Glue scraper unit Oscillating brush unit

Condition: used, Power Control Pc 22 Panel height 60 mm Solid wood mm 20 Pvc / Abs mm 3 Feed speed up to mt / min 24 Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Panel support guide Side roller conveyor with idle wheels for panel support Grinding group Lamps to heat the edge of the panel 6-position reel holder magazine with automatic edge change from C.N. Gluing unit for EVA hot melt glue with pre-melter and glue pot Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. End trimming unit with 2 motors with automatic inclination adjustment Overlapping trimming unit with 2 motors Gluing unit with 2 tilting motors electronically adjustable by C.N. Multifunction 4-motor rounding unit (gleaner + rounder) with numerical control adjustment in automatic Free space for the possible insertion of another work group Edge scraper group Oscillating brush group Kdedsgiyn Ispfx Aayek

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Kedpfx Aaot Hal Dsyjdk Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: used, Year of construction: 2015, Numeric Control Startouch Control System Panel height mm. 60 Edges in PVC/Abs rolls mm. 3 Solid wood in strips mm. 6 Feed speed up to 11 m/min Kjdpfx Aaotxtzkeyjdk Working height adjustable electronically by C.N. Panel support guide with adjustment Side roller conveyor with idle wheels for panel support Anti-adhesive group Adjustable two-motor rectifier unit Reel holder plate Gluing group for EVA glue Edge pressure unit on straight profiles with adjustable pressure rollers Trimming unit with 2 motors with automatic inclination adjustment Gleaning unit electronically adjustable by C.N. Multifunction rounding unit (edner + rounder) adjustable by C.N. Edge scraper unit Glue scraper unit Oscillating brush group

Condition: used, Year of construction: 2000, functionality: fully functional, NEW PRICE! Manufacturer: HOMAG Model: KFL 10/22/QE/CF Type: Double-side Sizing & Edge Banding machine Year: 2000 Status: Connected, test possible. Location Lithuania Basic machine Workpiece thickness 12...60 mm Workpiece width 70... mm Workpiece overhang to transport chain 40 mm Feed 10...40 m/min Power consumption Main drive 3...75 kW Height adjustment 0,2 kW Machine main drive Feed 6...30 m/min Power draw 2,2...6,9 kW Gluing unit Edging type: Straight and softforming edges Edging material height 16...65 mm Workpiece feed max. 60 m/min Contour, trimming unit CF/CS 10/11/12 Discharge valve HMA 1 Melting unit HMG 12-1x1-M-HO Gluing section for preformed parts Type of edge Straight edges drum profiles Edge material Belt from roll Kjdeuggpzopfx Aayedk Snipping unit for profile parts WK 46 Saw blade (diameter 80 mm, cutting width 3.2 mm, drill hole 34 mm, number of teeth 20) Flush-trimming unit and scraping unit for performed parts Buffing unit for performed parts Specification, layout on request

Condition: good (used), Technical Specifications: • Minimum panel width: 55 mm • Minimum panel length: 140 mm • Panel thickness (min/max): 10 - 60 mm • Edge thickness: 0.4 - 3 mm • Maximum strip thickness: 12 mm Components and Functions: Composition Grinding units eeders End trimmers Trimmers Kdodpfji E S Rlsx Aaysk Corner rounders Edge scrapers Brushes

Condition: excellent (used), DOUBLE-SIDE SIZING & EDGE BANDING MACHINE - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 270 - 1200 Numerical Control /Software SINITRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Working line (work units support tables), manual adjustment SIZING PART (for each side): No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5.8 x 2) Free space for Milling unit FS Milling unit (vertical join trimming) ES30 + ER30 (Kw 5 x 2) 0° - 90° Softforming Milling unit SF 10 (2 x Kw 2,4) 0° - 45° Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Lamps to heat the workpieces side (infrared heater) RP 10 Band Pressure zone (N.C. adjustment) Pressing rollers (revolver) both for straight and shaped edges (softforming) Soft PF40 (4 positions) mm 800 (Cesoia CI10+CS10+RL10) + Edge coils supporting unit (No. of reels) 6 Rough Milling unit RS 10 (Kw 1,3 x 2) Fine Milling unit Softforming RF 10 / SF (Kw 0,65 x 2) Fine Milling unit (Multi-profile) RF 30 (Kw 0,65 x 2) Milling grooving Unit FB 30 (Kw 4,5 x 2) 0 - 90° Profile edge scraping unit (Multi-profile) RB 30 Glue scraping unit RC 05 / Soft Spraying Unit (for polishing liquid) + Buffing unit SZ 30 (Kw 0,37 x 2) Ksdpfxot N Ix Rs Aayodk

Condition: used, Year of construction: 2008, functionality: fully functional, Type: Edgebander - single sided Manufacturer: BRANDT Model: Optimat KDF 550 C Year: 2008 Location: Lithuania Terms: as-is where-is Board thickness 60 mm Edge thickness 8 mm Feed advance 11 m/min Length x width x height 5860.0 × 1560.0 × 230.0 Weight 2600 kg Feed speed: 11 m/min Workpiece thickness: 8 – 60 mm / edge thickness: 0.4 – 8 mm / working height: 950 mm Electricity supply: 400 v – 3 phase – 50 hz / pneumatic pressure: 6 bar / noise emission level: 80…87 db(a) Kjdpexwwb Rjfx Aayjdk Extraction diameter: 1 × 120 mm / 2 × 100 mm / roll separation: max. 3. 0 × 45 mm / 0. 8 × 65 mm

Condition: good (used), Year of construction: 2013, Edge thickness Roll 0.4/3 mm / Straps 0,4/22 mm Workpiece thickness 10-65 mm Workpiece overhang 140 mm Feed sppeds 10-14-18-20 m/min Equipped with Twin edge milling unit Gluing unit Snipping unit Rough trimming unit Fine trimming unit Kdedpfsu Hldmsx Aayok Profile trimming unit Universal trimming unit Flat scraping unit Edge buffing unit " Sintra " control unit Dimensions (l x w x h) approx. 7000 x 1400 x 2100 mm Weight approx. 3600 kg Machine number 94391 Year of construction 2013 CE

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. Application Types Kdjdjx D Dq Sepfx Aayjk Complete Production

Condition: excellent (used), CATALOG NUMBER 7729 TECHNICAL DATA Equipment: - Tape holder - Glue tank (granulate) - Tape feeder - Guillotine – pre-cutting the edging - Pressure rollers 2 pcs - Min. width of processed components: 50mm - Thickness of processed components: 10-40mm - Min. internal radius: 50mm - Angled gluing with 1mm thick edging, 0-45° - Edge thickness: 0.3-3mm - Electric feed - Total power: 2kW - Compressed air pressure: 6-7 bar - Dimensions (L/W/H): 1700x1300x1550mm - Weight: 310kg ADVANTAGES – Made in Poland – Unpainted – DTR technical documentation – Very good condition – used edge banding machine Kdsdpfx Aasya Hnajyok Net price: PLN 6500 Net price: EUR 1550 (exchange rate: 4.2 EUR) (Prices may vary depending on larger fluctuations)

Condition: excellent (used), CATALOG NUMBER 7915 TECHNICAL DATA cutter head width: 640mm number of knives: 4 pcs max thickness of processed element: 200mm – top: anti-kickback fingers/ejectors serrated infeed roller, powered pressure unit planing cutter head pressure unit smooth outfeed roller, powered – bottom: adjustable rollers in lower table: 2 pcs motor: 7kW variable feed speed control Dimensions (LxWxH): 1800x1250x1150mm weight: 1250kg ADVANTAGES – Made in Bulgaria – Variable feed speed control Kodpfxeyrrzpo Aaysdk – Used thickness planer in very good condition Net price: 9500 PLN Net price: 2260 EUR based on 4.2 EUR rate (Prices may vary with major fluctuations)

Condition: excellent (used), Catalogue number 7734 TECHNICAL DATA - Shaft width: 630mm - Max. thickness of workpiece: 230mm - 4-knife planing shaft * from above: - Anti-kickback fingers - Toothed feed roller - Pressure bar - Planing shaft - Pressure bar - 2 smooth, driven outfeed rollers * from below: - Adjustable roller in bottom table - Motor approx. 7.5kW - Stepless feed speed adjustment - Extraction port diameter: 145mm - Dimensions (LxWxH): 1250x1300x1300mm - Weight: 908kg ADVANTAGES – Italian manufacture – Very good condition Kjdpfxeycidvj Aaysdk – Used thickness planer Net price: 21,900 PLN Net price: 5,200 EUR based on 4.2 EUR exchange rate (Prices may change with significant exchange rate fluctuations)

Condition: used, machine/vehicle number: 007956, Position 1: Roller Conveyors HOMAG-PROFI KFL 350/11/A3/WZ14 Position 2: Single Edgebanders HOMAG-PROFI KFL 350/11/A3/WZ14 Kdsdpfx Aajwuudmsyok Position 3: Panel Return Systems HOMAG-PROFI KFL 350/11/A3/WZ14

Condition: used, Year of construction: 2004, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: Kdedpfx Aey Abz Isayok Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels