Single edge bander

Scm K 400 T-ER1

Condition: used, Year of construction: 2014, Power Control PC 22 with WoodWop software - POWERTOUCH Panel height mm 8 - 60 Pvc/Abs mm 3 Feed speed up to mt/min 25 (with rounding 20 mt\min) Working height electronically adjustable by N.C. Motorized rubberized belt with upper pressure Panel support guide and easy introduction for small panels Controlled infeed guide Anti-adhesive group Rectifying group with two KW 3 motors each, 9000 RPM Reel magazine Gluing group for PUR glue with pre-melter and glue tank Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C. End trimming unit with 2 motors (automatic tilt adjustment?) Overlapping trimming unit with 2 motors Rounding unit with 2 multifunction motors (cornering unit + rounding unit) with NC adjustment Edge scraping unit Glue scraping unit Brushing unit Anti-stick unit TECHNICAL DETAILS TO BE CHECKED Bjdpfx Afevqbh Eohscu

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Bcsdpjudxchsfx Afheu Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Bsdpsxnldbjfx Afhecu

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Bcedspq If Dopfx Afhju Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: used, machine/vehicle number: 008160, Type of edging: Thin edge, Thick edge Bedpfxexqm Iyj Afhocu Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 14 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2011, WINCUT Numerical Control Working dimensions mm 3800 x 3800 Max blade projection (mm) 107 Front panel loading N. 10 pincers on the pusher carriage Lateral aligner Scoring group (max blade diameter / power) 160 / Kw 1,5 Main blade unit (max blade diameter / power) 380 / Kw 7.5 Adjustable speed of the blade carriage (m/min) 1 - 135 Pusher carriage speed 70 m/min N. 3 air curtain front benches TECHNICAL DETAILS TO CHECK WHEN THE MACHINE WILL BE IN OUR WAREHOUSES Bcedowwrywspfx Afhju

Year of construction: 2022, condition: new, Altendorf WA 6 manual height adjustment, double roller carriage length 2000 mm scoring unit, swiveling, cantilever table, angular miter fence, automatic brake, lowerable below table height ----- Technical data ----- Swivel range: 0 - 45 °, cutting width at rip fence: 1.000 mm, max. cutting height: 87 mm, max. saw blade Ø: 315 mm, Swivel range miter fence: up to 49 °, Speeds: 4,200 rpm, Engine power main motor: 5.5 hp / 4 kW, motor power scoring motor: 0,5 hp / 0,37 kW, Working table height: 910 mm, suction nozzle Ø: 1 x 100 / 50 mm each, weight: 450 kg Large suction hood Location: Ex stock 54634 Bitburg - immediately available - Location: Ex stock 54634 Bitburg Bcedpfx Afeihahmjhju - free on truck - - immediately available -

Year of construction: 1999, condition: excellent (used), 1999 Start type: to be agreed Bjdpfx Afed Nmdkohjcu Cost of delivery: Customer cover Conditions of delivery: OWN RECEIPT Category: Grinding machines in Poland Subcategory: Through grinding machines Subcategory 2: Grinding machines, brushing machines Description Manufacturer VANGROENWEGHE Model / type of TYPE M-300-COMBI / CE machine

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Storage location: Nattheim Bsdpfevvkqgex Afhecu

Condition: new, ALTENDORF WA 6 sliding table saw - Exhibition machine - manual height adjustment, double roller carriage, scoring unit, pivoting, outrigger table, angle mitre fence, automatic brake, can be lowered below table height ----- Technical data ----- Swivel range: 0 - 45 °, Cutting length: 2,500 mm, Cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade Ø: 315 mm, Swivel range mitre fence: up to 49 °, Bodpfx Aju R Sx Ejfhscu speeds: 4,200 rpm Motor power main motor: 5.5 hp / 4.0 kW, Scoring motor power: 0.5 hp / 0.37 kW, Work table height: 910 mm, Extraction nozzle Ø: 1 x 100 / 50 mm each, Weight: 450 kg - new exhibition machine -