Used Hranmechanica Ltd Pcm 200 for sale (19,367)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: Bjdpfx Akozp H R Ee Tjwr The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: excellent (used), I am offering for sale a high-quality RÖHM KFD-HS 200/3 hydraulic lathe chuck, designed for professional CNC lathes. The chuck is in very good technical and visual condition. It looks practically new and appears to have been used only a few times. The working surfaces and guides show only minimal signs of use. The set includes: * RÖHM KFD-HS 200/3 lathe chuck, * 3 standard jaws, * 3 RÖHM 538-55 top jaws, * operating wrench, * sturdy wooden transport box (I am not sure if this is the original box for this chuck). Technical data: Bodpfx Aozlaqkok Tewr * Manufacturer: RÖHM * Model: KFD-HS 200/3 * Diameter: 200 mm * Type: hydraulic 3-jaw lathe chuck * Maximum clamping force per jaw (Fmax): 48 kN * Total clamping force (Fges): 110 kN * Maximum rotational speed: 6500 rpm * Identification number: 155099 * Top jaws: RÖHM 538-55 * Country of manufacture: Germany The chuck is ideal for professional applications in machining and working on CNC lathes. It is a robust piece of equipment from the renowned German company RÖHM, which is valued for its high quality and precision.

Condition: excellent (used), WEBO 4-Headed Table Multi-Spindle Drill 4×0.75 kW 200–3000 rpm Bwjdpfxszkmfxj Ak Tjr

Condition: new, Year of construction: 2022, 7.65 linear meters wide-span shelving, 80 cm deep Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 9.56 linear meters Shelving package includes: Bwedpfx Aozrvvpjk Ter - 05 x frames, approx. 200 x 60 cm, disassembled - 32 x beams, approx. 185 cm - 16 x shelf panels, approx. 184.5 x 79.5 cm - 32 x support bars (approx. 80 cm, galvanized) - Including safety pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf, with evenly distributed load - Levels: 4 storage levels - Chipboard, natural finish - Uprights blue - New goods, available from stock - Other quantities available! Pre-assembly of the frames can be carried out by us for a small additional charge of €6/net each. Delivery available on request at competitive rates. -- AVAILABLE IMMEDIATELY IN MULTIPLE QUANTITIES -- Price: €1,001.00 net plus VAT as required by law. You will receive an invoice with VAT shown separately. Transport: Delivery is performed as requested by our partner shipping company; cost depends on postal code. Assembly: Our trained staff are at your disposal, providing professional assembly and disassembly of your facility as needed. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning and ordering through to installation.

Condition: new, Year of construction: 2022, 13.35 rm. Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 13.35 running meters Shelf offer consisting of: - 08 x frame approx. 200 x 80 cm, disassembled. - 56 x traverse approx. 185 cm. - 28 x support shelf approx. 184.5 x 79.5 cm. - 56 x beam / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : Bwsdpfezrvviox Ak Tor 1724,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 57 running meters Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 57 running meters Shelf offer consisting of: - 031 x frame approx. 200 x 80 cm, disassembled. - 180 x traverse approx. 185 cm. - 090 x support shelf approx. 184.5 x 79.5 cm. - 180 x joist / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. Bwedpfx Akozrvvco Tjr - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5737,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 28.85 running meters. Wide span shelving 60 cm deep Data : - Height : approx. 200 cm - Depth : approx. 60 cm - Length : approx. 28.85 running meters Shelf offer consisting of: - 16 x frame approx. 200 x 60 cm, disassembled. - 90 x traverse approx. 185 cm. - 45 x support shelf approx. 184.5 x 59.5 cm. - Incl. safety pins - Model : BLT , Type WR20/60 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Stand blue. - New from stock. - Other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. Delivery on request by us at a reasonable price. Bsdpfx Akszrvu Se Tewr -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2360,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 11.45 m Long-Span Racking, 80 cm Deep – Workshop Shelving, Warehouse Racking, Wide Span Shelving, Manual Storage, Shelving Systems, Small Parts Storage Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 11.45 linear meters Rack offer includes: - 07 x frames, approx. 200 x 80 cm, disassembled - 36 x beams, approx. 185 cm - 18 x shelf panels, approx. 184.5 x 79.5 cm - 36 x load distribution bars/crossbars - Incl. safety pins Bjdpfjzrvu Esx Ak Tewr - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf, with evenly distributed load - Levels: 3 storage levels - Shelves made from natural chipboard - Uprights in blue - Galvanized crossbars - New stock, available from warehouse - Other quantities available! Pre-assembly of the frames can be carried out by us for a small additional charge of €6.00/net per piece. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €1,175.00 net plus legally applicable VAT. You will receive an invoice with VAT shown separately. Delivery: Delivery can be arranged by our partner freight forwarder on request. Cost depends on the delivery postcode. Assembly: Our trained personnel can assist you with professional assembly and disassembly of your equipment as required. Our recommendation: Let us know your requirements… We are happy to support you in realizing your projects, from planning to ordering and installation.

Condition: new, Year of construction: 2022, 57 rm. Wide span shelving 60 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage , Data : - Height : approx. 200 cm - Depth : approx. 60 cm - Length : approx. 57 running meters Shelf offer consisting of: - 031 x frame approx. 200 x 60 cm, disassembled. - 240 x traverse approx. 185 cm. - 120 x support shelf approx. 184.5 x 59.5 cm. - Incl. safety pins - Model : BLT , Type WR20/60 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural. - Stand blue. Bsdpfezrvuxjx Ak Tjwr - New from stock. - Other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5885,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 57 running meters Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 57 running meters Shelf offer consisting of: - 031 x frame approx. 200 x 80 cm, disassembled. - 180 x traverse approx. 185 cm. - 090 x support shelf approx. 184.5 x 79.5 cm. - 180 x joist / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5737,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : Bwedpfozrvulex Ak Tsr On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 9.56 linear meters Wide Span Rack, 80 cm Deep Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 9.56 linear meters Rack offer includes: - 06 x frames approx. 200 x 60 cm, disassembled - 40 x crossbeams approx. 185 cm - 20 x shelf panels approx. 184.5 x 79.5 cm - 40 x cross braces (approx. 80 cm, galvanized) - Includes locking pins Bedpfx Aozruk Eek Tswr - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf level, with evenly distributed load - Levels: 4 storage levels - Chipboard shelves, natural finish - Uprights painted blue - New stock, available from warehouse - Other quantities available on request Pre-assembly of the frames can be carried out by us for a small additional charge of €6 net per unit. Delivery is available at a favorable rate upon request. -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €1,242.00 net plus legally applicable VAT You will receive an invoice with VAT shown separately. Shipping: Delivery by our partner shipping company is available on request; costs are based on your postal code. Assembly: Our trained staff is available to assist with professional assembly and disassembly of your facility if required. Our recommendation: Let us know your requirements... We are happy to support you throughout your project—from planning and ordering to installation.

Condition: new, Year of construction: 2022, 11.46 linear meters wide-span racking, 60 cm deep Specifications: - Height: approx. 200 cm - Depth: approx. 60 cm - Length: approx. 11.46 linear meters Racking offer includes: - 07 x frames approx. 200 x 60 cm, disassembled - 36 x beams approx. 185 cm - 18 x shelf panels approx. 184.5 x 59.5 cm - Including locking pins - Model: BLT, Type WR20/60 - Load capacity: 400 kg per level, with evenly distributed load - Levels: 3 storage levels - Chipboard shelves, natural finish - Blue uprights - New stock, available for immediate delivery - Other quantities available on request Frame pre-assembly can be provided by us for a small additional charge of €6/net per unit. Delivery at favorable rates available on request. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €965.00 net Plus statutory VAT You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged through our partner freight forwarder upon request. Transport costs depend on the destination postal code. Assembly: Our trained staff are available to assist with professional assembly and disassembly of your warehouse equipment if required. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning and ordering through to installation. Bjdpfxszrukxj Ak Tewr

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 0013, type of input current: three-phase, input voltage: 380 V, working height: 1,000 mm, total width: 885 mm, total length: 930 mm, total height: 1,630 mm, overall weight: 545 kg, insertion depth: 380 mm, Huen Chen HC-13TR4E Quadruple Automatic Riveting/Eyeleting Machine Heavy-duty automatic quadruple eyeleting machine, designed for the production of lever arch files and binders. The machine sets four eyelets/rivets simultaneously in one working cycle. The material is positioned manually against the adjustable guides. Operation is activated by two microswitches on the working table, so no foot pedal is required. Pre-punching of the material is not necessary. The machine punches and sets the eyelets in one operation. Bodsx Nfhlopfx Ak Tjwr Technical details: * Manufacturer: Huen Chen Enterprise Co. Ltd., Taiwan * Model: HC-13TR4E * Year: 1993 * Quadruple eyeleting/riveting system * Fixed spindle / eyelet spacing * Throat depth: 380 mm * Working height: approx. 1,000 mm * Motor: 1 HP * Power supply: 380 V, 3-phase, 50 Hz * Machine dimensions: approx. 930 × 885 × 1,630 mm * Net weight: approx. 545 kg * Intermittent motor operation * Two-microswitch workpiece activation The machine is complete with the installed tooling and a quantity of matching eyelets/rivets as shown in the photographs. The machine is in good used and fully functional condition and can be inspected while running at our warehouse in Son en Breugel, the Netherlands. IMPORTANTLY; this model is still part of Huen Chen's current product lineup!

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-2A-1S Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Bwodjy Uuw Tspfx Ak Tor Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Touchscreen This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties. Bwsdpfxsy Uiyvs Ak Tsr

Condition: used, 200 linear meters of Pallet Racking – Schäfer Palflex Used, in good condition, see photos. Height: 6.5 m Depth: 110 cm, galvanized Field load: 24,000 kg Beam length: 4.1 m, orange Beam load capacity per level/bay: 3,000 kg Negotiable price: €17,900 net ex warehouse The offer includes: + 49 units of frames, pre-assembled, depth 110 cm, height 6.5 m + 288 units of beams, length 4.1 m, 3,000 kg load capacity per level/bay + 576 units of safety locking devices + 196 units of concrete anchors Used corner protectors are immediately available, surcharge per piece: €15 net! Load capacity signs, documents, etc. are, of course, included. Further accessories can be found in the accessories catalog. The goods are in stock. Transport and assembly are possible upon request. Inspection can be arranged at any time. Further information upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes, errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions; all prices exclude VAT, ex warehouse.) Lenox Trading – Top warehouse technology & used and new heavy-duty racking Description text: Are you looking for high-quality warehouse racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving, tire racks, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner Bwjdpfx Akjvfnnze Tjr 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock, including a clean sweep clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and clean sweep handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / a heavy-duty racking system, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: ready for operation (used), Quin Systems PTSM322 Mini Machine Manager, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bwsdpfx Aoi Ecl Dek Ter

Condition: used, Year of construction: 1980, Technical details: pressure: ca. 100 t distance between columns: 500 mm throat: bis Mitte Stößel / up to center ram: 350 mm dayligth: 450+100 mm min. ram stroke: 26 mm max. ram stroke: 152 mm ram adjustment: möglich/possible mm ram surface area: 550 x 400 mm Bsdpfsu Nfhdsx Ak Tjwr clamping table: 1020 x 710 mm total power requirement: 10 kW weight of the machine ca.: ca.7 t space requirement approx.:: L:2,0 x B:1,7 x H:3,2 m WITHOUT drawing cushion Can be demonstrated in idle run. i.D. *

Condition: new, KSB Centrifugal Pump ETANORM SYT ETNY065-040-200 NEW 2024 25.6 m3/h 46 m For sale: high-quality centrifugal pump from the renowned German manufacturer KSB, model ETANORM SYT ETNY065-040-200. The unit is brand new, unused warehouse stock, in original KSB packaging. Perfect for industrial applications in water installations as well as heating and cooling systems. TECHNICAL DATA Manufacturer: KSB Bjdpfx Akjywu Uqs Tswr Model: ETANORM SYT ETNY065-040-200 Capacity Q: 25.6 m³/h Head H: 46 m Rotational speed: 2,950 rpm Impeller diameter: 187 mm Casing material: EN GJS 400 15 Year of manufacture: 2024 Flange connections CONDITION New, unused, warehouse stock May have minimal storage marks Original KSB packaging APPLICATIONS Industrial installations Water circulation pumps HVAC systems Heating and cooling installations Pumping stations

Condition: excellent (used), I sell in very good condition TIG welder, L-TEC 200 DC. Price given for 1pc. Bjdpfx Akjud R T Ss Tjwr

Year of construction: 2012, condition: good (used), Unit comes complete with suction lift Maximum load capacity: 150 kg Width: 650 mm Height: 2000 mm Depth: 1100 mm Bwodpfxozmyrds Ak Tor Weight: approx. 25 kg Condition: good, second-hand

Condition: new, Year of construction: 2025, Cardboard Core winder maschine for Toilet Tissue paper rolls Specifications • Carton web width 60 - 76 mm • Production speed 35 - 40 m / min • Core i. diameter 40 mm - 80mm Bedpfx Aeit N Rvjk Towr • No. of plies 2 , 3, 4 plies. (more optional) • Cut off length 600-2900 mm Features • Operation with either hot or cold glue. • Exchangeable mandrels. (for different core size) • Crush cutting by two or three circular cutters with synchronized movement. • Variable speed – electronic. (three phase)

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, load capacity: 8,000 kg, lifting height: 7,000 mm, battery voltage: 380 V, DGUV certified until: 06/2030, overall weight: 10,000 kg, total height: 9,900 mm, Equipment: CE marking, For sale: a two-rail gantry crane, manufactured in 2025 and with only 5 months of service. In impeccable condition, fully operational, and available for viewing in operation before purchase. Key features: Capacity: 8 tons using two independent 4-ton hoists on the main beam Span: 8 m Lifting height: 7 m Bsdpfx Aszrmigjk Towr Overhangs: 1.75 m on each side Overall height: 9.9 m Equipment weight: approx. 10 tons Power supply: 380 V three-phase Travel speed: 20 m/min Manufacturer: Henan Dafang Heavy Machine Co., MHE series Includes: electrical panel, cable reels, control unit, and access ladder Complete documentation: EUROCERT certificates No. 10.16.2627 (gantry crane) and No. 10.16.2628 (electric hoist) in accordance with Machinery Directive 2006/42/EC, valid until 2030, plus manufacturing drawings and declaration of conformity. The dual hoist configuration allows for synchronized handling of long loads, making it ideal for handling pipes and drilling columns, stone processing, precast concrete, and metal structure workshops. Located in Malaga. For sale due to the cessation of the activity for which it was acquired. Price: €26,000 (excluding VAT). Option to sell with dismantling and loading handled by the buyer. Operational video available upon request. If you have any questions or need more information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024126, product width (max.): 650 mm, working width: 650 mm, We are offering this very well-maintained, two-color flexographic printing machine, manufactured in 2024. Machine designation: Flexographic printing machine / 2-color / for a web width of up to 650 mm Manufacturer: China Wenzhou Hongyang Machinery Co. Ltd. Model: HYR-650-2 Serial number: 2024126 Year of manufacture: 12/2024 Bwedszmul Sopfx Ak Tjr Condition: very good (used) Functionality: fully functional Dismantling and transport must be organized by the buyer at their own expense. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: PCM, tapping collet -Type: ET1-40 -Size: Ø12 mm Bodpewzhgnofx Ak Tswr -Dimensions: Ø40 x 52 mm -Weight: 0.3 kg