Used Hs-Group Gmbh Vd-1350-S for sale (1,05,383)

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Hsdjzizkyepfx Alwou Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Year of construction: 2021, operating hours: 300 h, condition: used, functionality: fully functional, machine/vehicle number: I100, Florapower industrial continuous screw-press processing system, manufactured in Germany and commissioned in October 2021. The machine has accumulated less than 300 total operating hours and is in very good, fully operational condition. The system was originally configured for the continuous, solvent-free mechanical processing of dried hemp flowers and the production of hemp/CBD oil. In addition to hemp processing, the Florapower screw-press technology can also be used for the mechanical processing and cold pressing of a broad range of dry oil-bearing seeds and other suitable raw materials. Exact capacity and process parameters depend on the raw material, screw configuration and required final product. The system features: automated raw-material feeding and dosing industrial continuous screw-press technology PLC / touchscreen process control adjustable operating parameters stainless-steel process components continuous mechanical pressing solvent-free processing concept Manufacturer: Florapower GmbH, Germany Year: 2021 Commissioned: October 2021 Operating hours: less than 300 h Condition: very good / fully operational Original machine purchase price: approx. EUR 96,000 excluding installation and transport Total original investment: approx. EUR 110,000 Location: Slovenia, European Union Asking price: EUR 85,000 – negotiable Hjdpfszz Nvzox Alwsu The machine can be inspected and demonstrated under operating conditions by appointment. Detailed photographs, operating videos and additional technical documentation are available for serious buyers. Dismantling, loading and international transport can be agreed separately with the buyer. Reason for sale: change of production focus.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. Hodpfx Ajz Agv Uolweu - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Hodpfsz Agw Esx Alwju Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. Hedpfx Aoz Ag Rrolweu - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 029.700, Painting/drying booth from Luft- und Trockentechnik GmbH, type KSP 6-BT, manufactured in 1992. Hsdpsz D Evyofx Alwou The system is suitable for painting and drying workpieces and features an integrated exhaust/extraction system. Technical data: Manufacturer: Luft- und Trockentechnik GmbH Type: KSP 6-BT Year of manufacture: 1992 Manufacturer's number: 029.700 Usable volume: approx. 72 m³ Total volume: approx. 81 m³ Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum solvent quantity: 4,302 g/oven load The painting booth has dimensions of 6 x 4 meters. The system includes an exhaust duct with extraction via the roof. In addition, a suspension/transport system is located in the ceiling area, to which workpieces or painting racks can be attached and moved through the work area. Dismantling will be carried out by the buyer.

Year of construction: 2002, condition: good (used), functionality: fully functional, machine/vehicle number: 023116, Wenzel RS 1012 CNC 3D Coordinate Measuring Machine The Wenzel RS 1012 is a CNC 3D coordinate measuring machine (CMM) with a horizontal-arm design, engineered for the precise measurement of medium-sized to large workpieces, such as components and assemblies. The machine design is based on a stable cast iron or granite base plate serving as the measuring table, with a side-mounted guide system that allows for open loading from three sides. Key Technical Components & Specifications Machine Type: Horizontal-arm 3D coordinate measuring machine (CMM) Manufacturer: WENZEL Präzision GmbH Model / Year of Manufacture: RS 1012 / 2002 Serial Number: 023116 Measuring Volume (X/Y/Z): 2,000 mm × 1,000 mm × 1,200 mm Probing system: Renishaw PHC10-3 PLUS (interface/control for PH10 motorized rotary-tilting head) Design: Horizontal-arm measuring machine (column-type CMM) with integrated base plate Measuring accuracy (MPE): 15.0 μm+ (L / 45.0 mm total maximum longitudinal measurement error in the measuring range is approximately 50.0 micrometers) Sensor system (standard configuration): Delivered without a PC Key Features of the RS Series High Flexibility: The machine generally does not require a special foundation and can be flexibly integrated into existing production and laboratory spaces. Barrier-Free Accessibility: Thanks to the horizontal arm’s lateral guidance, the measuring table is freely accessible, which facilitates the loading of heavy workpieces using a crane or forklift. Hodpfx Ajzz Hywslwou Multi-sensor technology: In addition to tactile sensing systems (such as the TP20), the series can often be equipped by the manufacturer with optical line lasers or scanning sensors. “Everything from a single source: We’d be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de

Condition: refurbished (used), S&F Oscillating Screen | Screening Machine Type ASM-200 reconditioned | refurbished with new screen box, new bearings (flange bearings) and new vibration elements (rubber buffers) Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2004 Screening capacity: approx. 25 m³/h (for wood chips, depending on material) Fractions: 3 Screening area: 2.0 m² per screen mesh size Screening decks: 2 pieces Mesh size of the screen: - 1st screening deck: punched perforated plate screen, D = 40 mm or as per agreement - 2nd screening deck: punched perforated plate screen, D = 8 mm or as per agreement Drive power: 1,5 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Design: ECO Line Machine weight: approx. 1,300 kg Machine colour: RAL 7040 Window Grey // Protective housing: RAL 3020 Traffic Red Screen inserts freely selectable Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Hsdpezbvy Ijfx Alwju Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Year of construction: 2011, condition: used, functionality: unexamined, US welding system with UPS 20L - Ultrasonic generator Martin Walter MW 2000 WMI - The previously installed printer is missing Hodozlnb Ropfx Alwju - One or two air hoses are leaking - A test camera is missing - Shipping is possible for an additional charge.

Condition: used, Year of construction: 2024, functionality: fully functional, The bunker conveyor belt from Lange Fördersysteme is for sale; it was previously used in a company that manufactures medical products. Conveyor belt length: 2200 mm Discharge height: 2450 mm Usable width: 170 mm Mounted on adjustable feet within an aluminum frame. White belt with 30 mm high cleats spaced 145 mm apart. Hjdszyrt Tepfx Alwju Bunker: L: 1300 mm x W: 800 mm x D: 700 mm, covered with a Makrolon sheet. Base frame: L: 1500 mm x W: 900 mm Connection via Harting connector.

Condition: excellent (used), Year of construction: 2004, I sell the widebelt sanding machine COSTA S CCTT 1350, year 2004. Configuration: 1pc. steel cylinder 1pc. hard rubber cylinder 1pc electronic segmented pad 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Vacuum underpressure table with integrated ventilator. Hedpfxovxd Ttj Alwju Designed for the line, with fixed working height and moving aggregates. 4 motors total power 96kW Condition very good ! Available immediately.

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Delivery of the upper beam by feet clamping Hsdpofifbbofx Alweu High segments in the upper beam Bending and lower beam are segmented too RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request

Condition: new, Year of construction: 2025, Capacity 2020 x 2 mm (ST37) Delivery of the upper beam by hand lever left + right Hjdefifa Aspfx Alwju Slanted segments in the upper beam Continuous bending and lower beam rails RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request

Condition: used, Year of construction: 2022, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NS-009-50Hz-11kN-300, type of input current: AC, nominal power at 50% duty cycle: 160 kVA, throat depth: 300 mm, short-circuit current: 25,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 15 V, Zens Multifunction Spot Welding Machine 160 kVA – 50 Hz – 11 kN – Year of Manufacture 2022 For sale is a Zens multifunction spot welding machine in a robust industrial design. The machine is designed as a 50 Hz alternating current system and is suitable for various spot welding applications. The machine features an integrated seam welding adapter. The corresponding seam welding heads are not included in the scope of delivery and can be purchased separately. Thanks to the modular design of the machine, it is possible to use different welding tools and applications. Hodpfsztn Sxjx Alwsu Technical Data Manufacturer: Zens Model: NS-009 Machine Designation: Multifunction Spot Welding Machine Year of Manufacture: 2022 Welding Technology: Alternating Current (AC), 50 Hz Welding Power: 160 kVA Duty Cycle: 50% Max. Welding Force: 11 kN Welding Control: SER PLC Control: Siemens CE Safety: 2-Hand Control Seam Welding Adapter: Integrated Equipment Zens Multifunction Spot Welding Machine 50 Hz Alternating Current Technology Integrated Seam Welding Adapter SER Welding Control Siemens PLC Control Device Carrier System with Touchscreen 2-Hand Control as CE Safety Device Modular Machine Design Robust Industrial Design Available Separately The seam welding heads are not included in the machine's selling price and can be purchased separately. The "On Top" water cooling unit is also not included in the machine's selling price and can be purchased separately. The machine is in good condition and can be inspected and demonstrated by appointment. Note: Seam welding heads and the "On Top" water cooling unit are available separately and are not part of the machine offer. Subject to technical changes and errors.

Year of construction: 2011, condition: not inspected (used), Complete gas treatment and catalytic oxidation system with heat recovery – built in 2011 On behalf of our client, we offer a high-quality industrial gas treatment and catalytic oxidation system for sale. The system was originally designed and built for the treatment of methane, hydrogen sulfide, and hydrocarbon-containing gas streams from a geothermal application. It is still fully assembled and can be inspected by appointment. The system was taken out of service in 2015 in functional condition and subsequently decommissioned professionally. All components in contact with the process medium were emptied and cleaned. Since the decommissioning, the system has neither been operated nor regularly maintained. A current functional test has not been carried out. Before recommissioning, a technical inspection and, if necessary, the modernization of individual components – in particular, the control and automation technology – are required. Technical data Manufacturer: KOPF Holding GmbH (complete system) Model: Customer-specific special system Year of construction: 2011 Process air/exhaust gas flow rate: up to 6,000 Nm³/h Methane conversion according to original design: 90% Burner output: 250 kW Waste heat utilization: up to approx. 370 kW thermal output System scope Vacuum degassing system Hydrogen sulfide absorber Vacuum compressor system Water treatment Catalytic oxidation system Catalytic reactor up to 750 °C Two-stage pre-filtration Stainless steel main heat exchanger Waste heat recovery heat exchanger Gas burner Hodpfxezr T Dko Alwju Frequency-controlled main fan Dräger gas measurement technology Siemens S7 control system with process visualization Extensive measuring, control and safety technology Documentation Extensive original documents are available for the system, including: Process description Layout drawings Piping and instrumentation diagrams (P&IDs) Isometrics Quotation and project documentation The completeness of Ex certificates and pressure vessel documentation is currently being checked. Condition System completely assembled Taken out of service in functional condition in 2015 Components in contact with the process medium emptied and cleaned Not operated since decommissioning Sale in current condition Inspection possible by appointment The system is particularly suitable for applications in gas treatment, methane oxidation, VOC/exhaust gas purification, biogas, landfill gas or comparable industrial processes. Sale is on behalf of the client. Technical data is provided to the best of our knowledge based on the available original documents. A current functional test has not been carried out. Errors, changes and prior sale are reserved.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Hedjx S Etmjpfx Alwou Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: used, Year of construction: 2015, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 500 mm control: Mitsubishi M70 Hodpfx Ajzgu Aqjlwsu table-size: 2 × 700 × 400 mm mm table load capacity: 2 × 250 kg kg tool taper: SK40 / ISO40 Revolution per minute: 12.000 U/min. tool changer with: 24 Plätze (+1 Werkzeugwechselposition) total power requirement: 25 kW Weight approx.: 6,6 t dimension machine approx.LxWxH: 3,7 × 2,60 × 2,78 m The Müga S6040 is a modern vertical CNC machining center designed for the precise complete machining of workpieces in single-part, small-batch, and series production. The machine is equipped with a high-performance main spindle with speeds of up to 12,000 rpm, a Mitsubishi M70 CNC control system, and an integrated twin pallet changer (worktable changer) for highly efficient and productive machining. Its rigid machine structure and precision linear guideways make the Müga S6040 ideally suited for demanding milling, drilling, tapping, and machining operations in toolmaking, mechanical engineering, mold making, and general metalworking. 4-axis CNC machining center with pallet changing system – 2 workstations (A/B), each equipped with its own CNC-controlled 4th axis and chuck. *

Condition: excellent (used), Year of construction: 2018, VPS 100/2500 cardboard cutting machine – fully functional Fully automatic production of outer packaging from continuous cardboard Application: Packaging of high-quality aluminum rims with precisely fitting packaging to prevent slipping Working width: up to 2,500 mm Minimum length: 200 mm Cardboard thickness: 2.5–7 mm Tool width: approx. 45 mm Operating hours: 13,072 in a single-shift operation Accuracy: Longitudinal cuts: ±0.2 mm Length tolerance: ±1.5 mm/m Packaging size: 600 × 600 × 300 mm Output: approx. 55 s per packaging unit Bottom/lid construction Production of individual packaging for exclusive forged wheels. Bottom with corner locks to hold the rim upright Lid according to FEFCO 0331 If required, development of tightly fitting packaging concepts in consultation with the customer Packaging design Integrated software for creating your own packaging designs Database with approx. 250 packaging designs The machine processes continuous cardboard fully automatically. The patented multi-tool performs creasing, scoring, perforating, and cutting using the single-point principle. The material-friendly creasing technology prevents the cardboard from splitting. Perforations are performed using an oscillating knife with a freely adjustable perforation level. Cuts are made with a toothed knife on a rubberized roller, creating clean, fiber-free cut edges. All tools are adjustable by servomotor. Machine construction Welded construction 6 multi-function tools for longitudinal processing (optional up to 12) 1 transverse processing tool 2 rubberized rollers Segment-controlled overpressure Control: Industrial PC Beckhoff C6930 (Intel Core i5, 16 GB RAM, SSD) Windows 10 IoT Enterprise Beckhoff TwinCAT 3 21" multi-touch panel Control cabinet integrated Software functions: Production list control Dynamic tool management Multi-level waste optimization Bidirectional processing Monitoring of residual lengths Production data acquisition (CSV) Plain text error messages Automatic cardboard changer Automatic selection of the optimal cardboard web width. Standard with two positions, expandable to six or, with side-by-side function, to up to twelve web widths. Additional cardboard magazines expand the system with additional web widths and have their own sensors and residual length management. Box designer Programming software for customer-side workstations for the free creation and programming of individual cardboard designs. General condition The system is in good overall optical and technical condition. The machine cladding, safety devices and conveyor components are complete and intact. Hjdpfx Aljzmbi Dewou No visible damage, corrosion or significant signs of wear can be detected. Maintenance performed internally by the company via SAP-PM Every 6 months electrically Every 3 months mechanically

Condition: used, Year of construction: 2021, Technical details: voltage: 400/50 V/Hz air-pressure connection: - bar control: - Hjdpoy N R Hmjfx Alweu capacity: 150 kg/h protection class: IP 20 temperature range: 0 - 40 °C sound level:

Condition: new, NEW machine, end-of-series Pit Stop D2H HIGH SPEED double-head creasing and perforating machine, equipped with 2 standard creasing kits (for Head A and Head B) and mobile wheels. The second head, unlike the first, operates from bottom to top. All creasing and perforating tools can be installed on this second head. This allows creasing and perforating to be performed in a single pass; or, by fitting two creasing tools, it is possible to perform creases from both the top and the bottom in one pass, ensuring the correct crease orientation for zig-zag folding. High-performance creasing machine with a maximum output of up to 14,000 sheets per hour. Easy-to-use controls allow for up to 100 creases or perforations per sheet and a memory capacity of up to 200 jobs. The machine can crease, perforate, and punch, making it ideal for WIRE-O binding and calendar production. This end-of-series machine can be equipped with the following optional tools: - Digital creasing kit (for both Head A and Head B) - Perforation kit 2/1-3/1-4/1 (for both Head A and Head B) - Micro-perforation kit (for both Head A and Head B) - 100 cm extension - Punching kit in various sizes Technical data: Min./max. sheet size: 8×10 cm / 50×70 cm (with optional extension 50×100 cm) Paper weight: 80 to 600 g/m² Programming: 200 programs (100 operations per program) Minimum crease distance: 0.1 mm Hodpjxmhflofx Alwou Production speed in A4: 14,000 sheets/hour (with 1 crease) Power supply: 400 Volt three-phase + neutral, 50 Hz

Condition: good (used), functionality: fully functional, REF: MM6466 1 x OK International Group SuperSealer continuous band sealer on mobile height adjustable stand. Manufacturer - OK International Group. Model - SB-40 EU. Serial number - 218-2527-23 Speed - variable, up to 21.3 m/m. Hedpszudu Sjfx Alwju Bag material - Heat sealable materials up to 15 mils or 380 microns. Direction - Right to Left.

Condition: as good as new (ex-display), Year of construction: 2021, - Mobile scissor lift table with a single-scissor mechanism - With a smooth metal sheet platform, WITHOUT a sliding bar - The lifting mechanism (up/down) is operated via a hydraulic foot pump - Load capacity: 1200 kg - Overall height: 450 mm - Lifting height: 700 mm - Maximum height: 1150 mm - Platform size: 2000 mm x 1000 mm - Weight: 420 kg - 2 swivel casters with brakes, 2 fixed casters without brakes - Wheel diameter: 150 mm Hedsfnnayopfx Alwju - Powder-coated finish: base frame and platform frame in light gray RAL 7035, scissors in violet-blue RAL 5000

Condition: like new (used), Year of construction: 2018, functionality: fully functional, overall weight: 14 kg, input voltage: 24 V, type of input current: DC, Automatic torch cleaning station with a rotating reamer. The torch head is sprayed with anti-spatter fluid in a closed spray chamber. This reduces the consumption of anti-spatter fluid and prevents contamination of other equipment. The device is equipped with a wire cutter. Hedpfx Aszuc Epjlweu

Year of construction: 2025, operating hours: 2,000 h, condition: like new (used), Complete, as-new Subitec LS180 photobioreactor lab system, built and commissioned in 2025 (07/2025), used only in a controlled laboratory environment. A ready-to-run, turn-key platform for microalgae cultivation and process development — not a bare reactor frame, but a full working package: reactor, high-power lighting, gas management, cooling and a modern B&R automation system with touchscreen and secure remote access, all in one compact unit. At its core is a 180 L Flat-Panel Airlift (FPA) reactor in transparent PVC. Internal static mixers and downcomer geometry create gentle, continuous circulation between lit and shaded zones for optimal growth — without any mechanical stirring. Highlights: Superior, proven performance: in-house cultivation has reached growth rates above 5 g/L/day and densities up to 14 g/L with Chlorella vulgaris. Powerful lighting, high-efficiency light path: double-sided dimmable LED (~4,080 W, full 400-780 nm spectrum), ideal for high-density cultivation and for studying versatile light regimes. Easy to run and keep clean: low-shear airlift circulation, transparent panel with no gradual film build-up, intuitive touchscreen operation. Compact footprint vs. bulky tubular systems (approx. 2.6 x 0.8 x 3.2 m). Tailor-made beyond the standard Subitec design: automatic CO2 dosing via a Bürkert control valve and real-time concentration measurement of the outgoing (off-gas) CO2 for carbon-uptake monitoring. Data-ready automation: all key process variables (pH, temperature, CO2 dosing and off-gas uptake) continuously logged on an open B&R platform. Technical data: Reactor: Flat-Panel Airlift (FPA), 180 L, transparent PVC; aluminium frame Dimensions (L x W x H): approx. 2.6 x 0.8 x 3.2 m Year built / commissioned: 2025 / 07/2025 — as-new Temperature range: 5-30 °C; noise < 70 dB(A) Lighting: LED, double-sided, ~4,080 W, 400-780 nm, max. 500 µmol/m²/s per panel, dimmable Hsdpfezluymox Alweu Automation: B&R X20 PLC (X20CP1685 / X20EM1612), 4 GB eMMC, Profinet, full I/O set HMI: B&R Power Panel T80 12.1" touchscreen Remote access: Tosibox Lock 670 secure router CO2 dosing: Bürkert 8741 mass flow controller (0-10 Nl/min, Modbus TCP), pH-based PID control CO2 off-gas: Norsk Analyse GD10P NDIR analyser (0-100 vol-%, CH4-immune) Cooling: two reactor-integrated heat exchangers + dedicated chiller Control cabinet: Rittal (800 x 1200 x 300 mm); Hager main switch, 3-phase RCD & breakers Supply: 3 x 230 VAC / N / PE, 16 A; 24 VDC control Scope of delivery (single working package): 180 L FPA reactor in aluminium frame; double-sided dimmable LED lighting; gas-mixing unit and filtered (0.2 µm) gas supply; Bürkert CO2 mass flow controller; Norsk Analyse off-gas analyser; chiller and integrated cooling; periphery (media/harvest lines, filters, sampling unit); exhaust unit (foam trap + air lock); Rittal cabinet with B&R automation and 12" touchscreen; Tosibox remote access; temperature and pH sensors. Support: operator training included (remote, or on-site by agreement). We can also advise on the best use of Chlorella strains, recommend species that perform well in this reactor, and share relevant cultivation data. Location: Lahti, Finland — viewing by appointment. Price and delivery terms by agreement.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, operating hours: 100 h, Gravimetric dosing and mixing system: Mixing system with 5 gravimetric dosing units 5 units: • Gravimetric screw dosing unit • Feeding hopper with pneumatic rotary valve, each with a lid • Screw conveyor for feeding from a big bag, with height-adjustable individual stand Hjdpfst S Rduex Alwou 1 unit: • Trough screw for combining and conveying the dosed materials into a transfer container. 5 units: • Big bag feeding station, with a suspension crossbeam to prevent the big bag from collapsing during emptying. • Big bag disc base with discharge aid (vibration drive) Option not included in the price: Control cabinet including control system Delivery EXW