Used Hydr. Profile And Bar Shear for sale (28,151)

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min Hfodpfxot Ucgas Aftjl - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm - Cutting line lighting - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Year of construction: 1993, condition: good (used), machine/vehicle number: 479, Offer 22408 Technical data: Hfjdpfx Aspxmxcjftel - max working width 3050 mm - max cutting capacity St 40 10 mm - throat 270 mm - cutting angle ° - cutting gap adjustment by hand - number of hydraulic hold-downs 16 pcs - motorized backgauge 20 - 650 mm - front angle fence + support arms - number of strokes depending on cutting angle and cutting length 7 - 12 per/min - hydraulic drive 400 V / 22 kW - table height approx. 820 mm - Space requirement incl. backgauge, without front support arms - approx. W 3850 x H 2000 x D 2000 mm - weight approx. 8500 kg - with: - E-foot - switch - cutting line lighting

Year of construction: 1994, condition: good (used), machine/vehicle number: S 2645, Offer 22347 Technical data: - max. working width 4050 mm - max. cutting capacity St 40 6 mm - adjustable cutting gap - number of strokes depending on cutting length approx. 20 - 25 per minute Hfsdpfxoibmaxs Aftel - rear stop with positioning control ELGO 10 - 750 mm - cutting length adjustment - hydraulic clamping device - front angle stop - front support arms, laterally adjustable - drive 400 V / 15 kW - foot pedal - space requirement without support arms approx. W 4850 x H 2000 x D 2300 mm - weight approx. 10800 kg

Condition: used, Year of construction: 1990, Max. punching force: 600 kN Max. shear force: 800 kN Punches 27 mm holes in 16 mm steel Hjdetmyifspfx Aftofl Cuts on the flat bar shear up to 400 mm with material thickness of 16 mm steel Hydraulic hold-down on plate shears Large support table on die side with stops Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg

Condition: used, Pressing force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm at the flat bar shear With pipe shear clamp on the bar shear Foot switch for lift release support table on the stamping side Hfedjw Im Shspfx Aftol Quick-change device Great condition Range of tools included in the price

Condition: good (used), Year of construction: 1992, machine/vehicle number: 2708, Offer 23478 Technical data: - max. working width 3030 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustment - Cutting gap adjustment - Number of hydraulic hold-down devices 17 pcs - Motorized backgauge with positioning control ELGO 10 - 950 mm - Back gauge with safety guard - front angle fence + 2 support arms - max. stroke rate at max. cutting length 13 per/min - Hydraulic drive 400 V / 11 kW - Table height mm Hfsdpsq R T U Dsfx Aftol - Space requirement incl. back gauge, without front support arms, without safety guard - approx. W 3800 x H 1840 x D 2350 mm - Weight approx. 7500 kg

Condition: used, Stanzkraft: 750 kN (punching force e.g. 30 mm hole in 22 mm material), with search device via foot switch for anchoring Overhang: 320 mm Hfedpfx Aor R Auzjftel Cuts 450 x 15 mm or 300 x 20 mm on the angle/flat bar shear Support table on the punching side Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Assortment of tools is included in the price

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 20 1/min, stroke rate (max.): 20 1/min, sheet thickness (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 2 mm, table height: 740 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 3,800 kg, total length: 3,130 mm, total width: 2,030 mm, total height: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, BRAND-NEW HYDRAULIC GUILLOTINE SHEAR 4 × 2500 E21S Controller and Laser Cutting-Line Guide The hydraulic guillotine shear is designed for accurate straight-line cutting of sheet metal and strips. It is suitable for steel, non-ferrous metals and other compatible materials. With a maximum cutting capacity of 4 mm and a working length of 2500 mm, it is an efficient solution for fabrication workshops and industrial production facilities. The machine combines a robust hydraulic system with a motorized back gauge and E21S controller, allowing quick and repeatable positioning. An illuminated laser guide clearly indicates the cutting line and helps the operator align the workpiece accurately before each cut. Hydraulic hold-downs secure the sheet along the entire cutting length. Ball transfer units integrated into the table make large sheets easier to position and help protect their surfaces during handling. Front support arms and a front gauge with measuring scale provide additional support and simplify repeat work. The segmented blade design allows an individual damaged section to be replaced instead of the complete blade, helping reduce maintenance costs. Adjustable blade clearance enables the machine to be set for different sheet thicknesses and materials. TECHNICAL DATA - Maximum sheet thickness: 4 mm - Maximum cutting length: 2500 mm - Blade rake angle: 1°30′ - Cutting frequency: 20 strokes/min - Back-gauge travel: 600 mm - Distance between side frames: 2650 mm - Blade length: 2550 mm - Table height: 740 mm - Motor power: 5.5 kW - Weight: 3800 kg - Dimensions (L × W × H): 3130 × 2030 × 1600 mm - Controller: E21S - Cutting-line guide: Laser STANDARD EQUIPMENT Hfodpfxsyt E Aio Aftel - Motorized back gauge - Ball-guided back-gauge system - Hydraulic sheet hold-downs along the full cutting length - Segmented, individually replaceable blades - Blade-gap adjustment - Ball transfer units on the worktable - Front material-support arms - Front gauge with measuring scale - Rear safety guard - Front safety guard - Foot-control pedal - E21S controller - Illuminated laser cutting-line guide CONDITION, WARRANTY AND DOCUMENTATION - Brand-new machine - 12-month warranty - Warranty and post-warranty service - CE Declaration of Conformity - Operating and maintenance manual in English This guillotine shear offers a practical combination of cutting capacity, operator-friendly controls, reliable sheet positioning and safety equipment. Its compact design makes it suitable for both general fabrication and repeat production work. Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a transport quotation. Please visit our website to view our other available metalworking machines.

Condition: used, Stanzkraft: 550 kN (punch force, e.g. 30 m in 16 mm material), with detection/inspection arrangement via foot switch for anchoring Cuts 350 x 13 mm or 230 mm on the flat bar shear Overhang: 305 mm Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Support table on punching side Assortment of tools is included in the price Hedpfet Exprex Aftefl

Condition: used, Year of construction: 2002, sheet thickness: 13sheet length: 3060motor: 30Stroke/min: 12messurements (LxWxH): 4000 x 2300 x 2600weight approx.: 11900Baykal 3100x13 cutting machine– Year of Manufacture 2002 Including 1 set of upper blades and 1 set of lower blades. This high-performance guillotine shear stands out with its robust construction and excellent cutting precision. Its substantial weight ensures stable, low-vibration operation, making it ideal for demanding industrial applications. Technical Specifications: Year of Manufacture: 2002 Cutting Capacity (St 42): 13 mm Cutting Length: 3060 mm Main Motor Power: 30 kW Main Voltage: 380 V / 50 Hz / 3 Phase Hodpsy D U Dfjfx Aftefl System Pressure: 260 bar Dimensions & Weight: Width: 2300 mm Lenght: 4000 mm Height: 2600 mm Weight: 11,900 kg The machine is currently under power and available for inspection and testing at any time.

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: 5053-4053142274002, power: 30 kW (40.79 HP), Bar shears, make Peddinghaus, type Caddy 63 Technical data: Shearing force/diameter (max.): 2000 kN/63 mm Hodstukpaopfx Aftsfl Drive power: 30 kW Equipment/special feature: bar magazine, 6 m

Condition: used, Machine designed for inserting plastic bars into the slots of aluminium profiles. The drive system consists of four motorized rotors, preventing the bars from jamming during the insertion process. The AS 242 L thermal break profile bar insertion device has been designed to efficiently insert plastic bars into aluminium thermal break profiles, ensuring smooth flow, precise alignment, and reduced cycle times. No. 2 motors, 0.75 kW – 400 V – 50 Hz Operating pressure: 7 bar Bar feed speed: 100 m/min Bar guide travel: transverse 7 – 256 mm, vertical 0.5 – 140 mm Working capacity (bar height): Minimum 10 mm – Maximum 60 mm Automatic ejection of the bar tail Push-button for partial insertion of the bars into the lower profile The transverse adjustment of the bar guide is carried out via a single control equipped with a decimal position indicator. The vertical adjustment of the bar guide is carried out via two independent controls, each equipped with a decimal position indicator. Bar stop can be excluded via push-button control Machine dimensions: 1020 mm (width) x 825 mm (depth) x 1400 mm (height) Hjdpfx Afsy Idxmetefl Machine weight: 235 kg

Condition: used, Year of construction: 2001, functionality: fully functional, Plate shear, manufacturer Peddinghaus Caddy 63 Year of manufacture: 2001 Completely overhauled in 2011 Shearing force: 2000 kN Hodpfx Aszhndqeftofl Stroke rate, max.: 48/min. (the achievable number of pieces depends on the part length and the equipment of the system) Shearing diameter: 63 mm Material strength: 450 N/mm² Control system: S7-300 Operator panel: MP 277 Touch 8" Weight: approx. 7.9 tons.

Condition: used, Hydraulic guillotine shears SAGITA - MANURHIN - License BEYELER Type 2550 x 6 Machine. No. 00682 Year of construction 1980 Cutting length 2520 mm Cutting thickness 6 mm Backgauge 750 mm Cutting angle adjustable Hydraulic pressure max. 290 bar Motor power 11 kW Mains connection 400 Volt, 50 Hz - Back gauge with motorized adjustment and mechanical actual value display, fine positioning via handwheel - Manual cutting gap adjustment - Infinitely variable cutting length adjustment - 11 pieces hydraulic sheet metal hold-down device - front angle fence left 1300 mm - 3 front table extensions 1300 mm Hfjdpfxst Ac D Uj Aftsl - electric foot switch - very solid and torsion-resistant welded construction - 1 set of replacement blades - slightly damaged (blade length 2550 mm) - operating instructions Space requirement with table supports L x W x H 3200 x 2800 x 1600 mm Space required for transportation L x W x H 3200 x 2150 x 1600 mm Weight 6300 kg Good condition

Year of construction: 2000, condition: good (used), Technical Specification Punching/Shearing system Material * flatsteel length : 6.000 mm width : 50-500 mm thicknes : 5-30 mm * angle steel length : 12.000 mm width : 50 x 50 — 150 150 mm thickness : max. 15 mm Punching Machine VPO 1400 Capacity : 1400 kN (140T) Punch diameter/material thickness (max): 32 mm/25 mm Punching in flat- and angle steel : yes Number of punches for flat steel : 4 Number of punches for angle steel : 1 Hydraulic clamping : yes Centring points : yes Mist lubrication system : yes Shear for Flat Steel VPS 1800 Capacity : 1800 kN (180 ton) Width/material thickness (max) : 500 mm/22 mm Hydraulic clamping : yes Mitreshearing : +/- 45° Shear for Angle Steel VHS 1800 Capacity : 1800 kN (180 ton) Suitable for Angle : 50x50x5 up to and included 150x150x15 Hydraulic clamping : yes Punching Unit for Angle Flange Capacity : 600 kN (60 ton) Punchdiameter/material thicknes (max.) : 32 mm / 15 mm Numbering Unit Number of disks : 4 pcs Number of characters : 36 pcs Character hight : 10 mm Number of characters per code : standard max. 16 Hfjdpfoq Hu H Rjx Aftol Inprint : approx 1 mm Electrical power : 3 x 415V AC + N + PE, 50 CPS

Condition: good (used), Profile steel shear, profile shear, punch, punching machine, hole punch Hedpecc Ubuefx Aftsfl -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

Condition: used, Year of construction: 2002, sheet thickness: 13sheet length: 3060motor: 30Stroke/min: 12messurements (LxWxH): 4000 x 2300 x 2600weight approx.: 11900Baykal 3100x13 cutting machine– Year of Manufacture 2002 Including 1 set of upper blades and 1 set of lower blades. This high-performance guillotine shear stands out with its robust construction and excellent cutting precision. Its substantial weight ensures stable, low-vibration operation, making it ideal for demanding industrial applications. Technical Specifications: Year of Manufacture: 2002 Cutting Capacity (St 42): 13 mm Cutting Length: 3060 mm Main Motor Power: 30 kW Main Voltage: 380 V / 50 Hz / 3 Phase System Pressure: 260 bar Dimensions & Weight: Width: 2300 mm Lenght: 4000 mm Height: 2600 mm Hfjdszwylxopfx Aftjl Weight: 11,900 kg The machine is currently under power and available for inspection and testing at any time.

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3219, Offer 24295 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 16 mm - throat 270 mm - Cutting angle 2.4 ° - Cutting gap adjustment by hand - Number of hydraulic hold-down devices 16 pcs - Motorized back gauge with positioning control 20 - 1000 mm - Front angle fence + support arms - Stroke rate depending on cutting angle and cutting length 7 - 18 per/min - Hydraulic drive 400 V / 30 kW - Table height approx. 820 mm Hfodpfx Aju Upafsftsl - Space requirement incl. back gauge, without front support arms - approx. W 4000 x H 2400 x D 2400 mm - Weight approx. 14500 kg - with: - electric foot - switch - cutting line lighting - - cutting length preselection - Rear guard with light barrier

Year of construction: 1991, condition: good (used), machine/vehicle number: 166, Offer 22014 Technical Data: - max. working width 4080 mm - max. cutting capacity St 40 6 mm - hydraulic cutting angle adjustment - manual cutting gap adjustment - stroke rate, depending on cutting angle and cutting length, approx. 20 - 25 per minute - rear stop with positioning control ELGO, 10 - 1000 mm - cutting length adjustment - 17 hydraulic clamping cylinders - front angle stop Hfodpoh N U Hpjfx Aftjl - front support arms - Drive 400 V / 9 kW - Foot pedal - Space required without support arms, approx. W 4450 x H 1900 x D 2300 mm - Weight approx. 10500 kg

Condition: used, Year of construction: 1973, sheet width 3100 mm plate thickness 3 mm rear stop 1000 mm down holder 18 Stk cutting angle 0.5 - 1,0° 30° ° oil volume 150 l total power requirement 5,5 kW weight 4300 kg dimensions of the machine ca. 3800 x 1950 x 1600 mm Hjdpfx Afstzv T Tetefl Features: - Manual rear stop (front via handwheel) - Manual cutting angle adjustment - 1x front support arm - 1x side stop - Front finger guard - Operating instructions (English)

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: INV 42, The shears were purchased new from China in 2012. The machine is in fully working condition but has not been used for the past 5-6 years. It has been replaced by laser cutting machines. Metal cutting shears from China Country of origin: China Year of manufacture: 2009 Hsdpfx Aezwvwkoftofl Maximum cutting length: L=3200mm Maximum sheet thickness: 12mm, at a tensile strength of 500N/mm2 Model: Y160L-4 Main motor power: P=15kW Number of strokes during normal operation: n=10/minute Pump pressure: Pp= 31.5 Mega Pascals Pump capacity: V= 40l/min Minimum sheet thickness for cutting: 0.5 mm Machine weight: 9,600 kg

Condition: used, Hydr. guillotine shears SAFAN type VS 310 / 4 Machine. No. B7140 Year of construction 1984 Cutting length 3100 mm Cutting thickness 4 mm Hfedpfxjumpq Nj Aftsl Back gauge 900 mm, accuracy +/- 0.5 mm Angle fence front left 2100 mm Hydraulic tank capacity approx. 120 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz - Motorized back gauge with positioning control and digital position display - Single stroke and continuous stroke with adjustable stroke pause - Cutting angle adjustment - Manual cutting gap adjustment - stepless cutting length adjustment - Cutting line lighting - 17 Hydraulic sheet hold-down device - Angle stop left with scale 2100 mm - 2 material support arms 1600 mm - 2 material support arms 615 mm - Electric foot switch - Fixed finger guard in front of the hold-down devices Space requirement without sheet supports L x W x H 3850 x 2300 x 1680 mm Machine depth with sheet supports 3900 mm Weight 5.7 tons good condition

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge Hfjdpfx Aouagxpsftol - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Kaltenbach KPS 506 CNC Flat Bar / Angle Punching / Shearing Line – Year 2007. 500mm Capacity Flat Bar. 160mm x 160mm Angle. 3 head Punch. Hfedpezcqniofx Aftol Horizontal punch. 6 metres Gripper feed. Mitre Shearing.

Condition: good (used), Year of construction: 2008, total width: 920 mm, Technical specifications of the WOHLENBERG MCS-2 92 paper cutting machine: maximum cutting length: 920 mm opening: 920 mm air table with side tables (right and left) hydraulic clamping system with adjustable pressure support bar under the clamping system spare blade safety guards power supply: 3x 380 V; 50 Hz Hfodpfjzxrtdex Aftel