Hydr. guillotine shear

GWF S 6 - 4000

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. Pgsdpshzbipofx Ag Tji - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Pedpfx Ajf Sqckeg Tsgi Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: used, Year of construction: 2003, pressing force: 260 t, Hydraulic press brake Manufacturer: HACO Type: ERMS 60-260 Year of manufacture: 2003 Technical specifications Manufacturer: HACO Type: ERMS 60-260 Year of manufacture: 2003 Pressure capacity: 260 t Bending length: 6000 mm Dimensions (L x W x H): approx. L 7.0 x W 2.0 x H 3.70 m Weight: approx. 31 t Equipment • ATS 560 digital control system • Fiessler light barrier at the front • Centrally adjustable crowning • Amada tool system • Controlled axes: Y1, Y2, X Pgodpswkttrofx Ag Tsi • Manual R-axis • 1 set of upper tools • 1 set of lower tools All information is subject to change. A demonstration is available at any time in the exhibition hall.

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. Pgjdpfx Ajd Ixadjg Toi A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Weight (kg) 5000

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, overall weight: 22,800 kg, pressing force: 250 t, CNC press brake Pjdpfx Ager Sxq Ro Tegi Manufacturer: Weinbrenner Type: GP250 Machine specification:- Crowning -Matrix displacement -Rear stop type 2 -Front bending aid (removed for transportation) -DNC 900PS control unit All documentation for the machine is available.

Condition: used, Year of construction: 1977, Surface grinding machine Fabr.Okamoto Type:PSG - 63 UA Bj.1977 Magnet 600 mm X 300 mm. Grinding dimensions : longitudinal 630 mm transverse: 310 mm height : 350 mm Ready for use . Pjdpfxsiz Tmke Ag Togi

Year of construction: 1965, condition: used, pressure 150 t throat 550 mm stroke 10 - 140 mm table surface area 1180 x 980 mm no. of strokes 40 Hub/min dayligth 500 mm ram surface 1040 x 800 mm ram adjustment 70 - 150 mm tool shank hole (depth x diameter) 435 x 55 mm required power 15 kW weight of the machine ca. 12 t dimensions of the machine ca. 3 x 1,7 x 3 m - with additional brake - slide weight compensation Pedocubatspfx Ag Tsgi - motorized slide adjustment - central grease lubrication (manual) - table mounting plate - safe for manual inlay work

Condition: used, Year of construction: 1984, x-travel 2500 mm y-travel 750 mm z-travel 1000 mm Psdpjtqqnwsfx Ag Tsgi table surface area 2550 x 800 mm spindle taper SK 50 control HEIDENHAIN, TNC 150 B weight of the machine ca. 16 t

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Technical data: - max. working width 2540 mm - max. cutting capacity St 40 4 mm Pgjdpohhc Ixefx Ag Tsi - mot. cutting angle adjustment - cutting gap adjustment by scaled adjusting screws - number of hydraulic hold-downs 14 pcs. - motorized backgauge with positioning stop 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per/min - hydraulic drive 400 V / 7,5 kW - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm - weight approx. 3600 kg - with: - pneum. supported sheet metal support - front angle stop + support arms - Electronic cutting depth adjustment - cutting line illumination - E-foot switch

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm Psdjg U Uv Ropfx Ag Tegi 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S