Used Internal Micrometer Gauge 2 Sets for sale (85,563)

Condition: used, Year of construction: 2020, operating hours: 2,563 h, power: 192 kW (261.05 HP), Equipment: air conditioning, all wheel drive, cabin, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to finalization, errors, typographical errors, and prior sale: Fendt Rogator 655D sprayer Registration date: May 20, 2021 Production unit: .563 Pump hours: 1,500, sprayer hours: 695 Transmission: 40 km/h 2 rotating beacons 8 headlights at the top front, 6 headlights at the bottom front Work lights at the top rear Full cab with air conditioning, Category 4 Lsdpsz Edlvofx Ab Ujhl Joystick control 2 monitors / Varioterminal 10.4" 2 camera systems Air conditioning Radio, Bluetooth, USB port, hands-free phone system 2nd seat Refrigerator and warming cabinet 3" suction hose 3" high-performance pump system Stainless steel centrifugal pump 785 L/min 5-way valve, stainless steel, electric 1 Agromie basic package Contour Assist 2 water connections on the driver's side at the bottom for supply and drainage 2 partial widths 18 and 36 m / nozzle bar Dualtec 2+2 Rinsing gate Electric tank level sensor Spray nozzles 0.5 at the front + fertilizer nozzle behind it Nozzle XRC11003-VP set, 75 pcs 2 sensors on each side for slope compensation Large tank 6,000 L, rinsing tank 500 L Air compressor with pneumatic system Mechanical ground sensor Optisonic boom height control Variable Tecontrol Varioguide RKT Novatel Emergency steering Optisonic height control Central lubrication Hand wash tank and soap dispenser on the driver's side at the bottom Small storage compartment under the cab on the driver's side Retractable step with storage area Storage compartment on the passenger side at the bottom Both axles steerable Trailer coupling 2-wheel, 4-wheel Tires: Allianca Agriflex IF 480/80R50, front approx. 60%, rear approx. 80% 2 track widths, Optitrac hydraulic track adjustment Price: € 165,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of € 10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Errors, typographical errors, and prior sale are subject to change.

Condition: excellent (used), functionality: fully functional, Vemag HR 2x5=10 | Set of 3 industrial smoking and steaming chambers (Total capacity for 30 trolleys) Technical specifications of the set (3 chambers): Manufacturer: Vemag Anlagenbau GmbH Model / Type: HR 2x5=10 (Two-row system) Capacity of a single chamber: 10 standard smoking trolleys (2 rows of 5 trolleys each) Total capacity of the set: 30 Euro / standard trolleys Power supply / Heating medium: Steam Detailed technical data for each chamber: Chamber 1 (Year 1990): Serial number: 5202023 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 400 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Chamber 2 (Year 1993): Serial number: 520.2359 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Chamber 3 (Year 1993): Serial number: 520.2389 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Dimensions (for each individual chamber): Internal dimensions: 1230 × 5250 × 2100 mm Overall external dimensions: 3300 × 5750 × 4500 mm Control cabinets included: 3 units, dimensions of each: 800 × 340 × 1000 mm Ledpfx Absy Ua Rxj Uehl The set does not include smoke generators The Vemag HR 2x5=10 is a powerful, highly advanced industrial system designed for the thermal processing of meat, sausages, poultry, and other food products. The presented set, consisting of three robust steam and smoking chambers, constitutes a complete production line capable of handling up to 30 smoking trolleys simultaneously, making it an ideal solution for large-scale industrial processing plants. The chamber design is based on a two-row system (2 rows of 5 trolleys each), which ensures optimal air and smoke circulation, and therefore a perfectly even distribution of temperature and color at each trolley level. Key advantages: - High-performance steam heating: The use of a steam system operating at a pressure of 6–10 bar allows for rapid achievement of the desired temperatures, reducing the steaming and baking time to a minimum, which directly translates into lower weight loss of the finished product. - Precise humidity control: Individual steam humidification systems (up to 400 kg/h in the older model and up to 270 kg/h in the 1993 models) guarantee full control over the climate inside the chamber, which is crucial for achieving the ideal juiciness of the products.

Condition: excellent (used), For sale: a complete, professional magnetic particle testing (MT/NDT) kit from the renowned brands Tiede and Blak-Ray, used in industrial quality control, welding, rail transport, and the energy sector. The equipment is fully operational and in very good technical and visual condition—ready for immediate use. The set includes: • Tiede FSM-2 – magnetic field strength meter (Feldstärkemessgerät), measuring range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional long wave ultraviolet meter for UV lamp verification in NDT applications • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks Lhjdpoxl Dbtefx Ab Uel • Measurement probe with cable • Calibration specimen and auxiliary accessories • Glass cylinder for indicator fluid • Original transport case with protective foam Applications: • Weld seam inspection • Shaft, axle, and machine component examination • Testing of railway, energy, and aviation parts • Quality control in industrial production

Condition: used, Year of construction: 2013, Overview  Lhsdpfswhk Dvox Ab Usl This Wirehooder was manufactured in 2013 by SICK INTERNATIONAL in Germany. The machine is available for immediate sale, as the production in the factory was stopped in 2022. The platforms for the operator are included. Technical data  - Capacity: 9,000 bph to 12,000 bph - Formats: Cork caps for cider and champagne glass bottles (75cl) - Dimensions: L. 200 cm - W. 150 cm - H. 250 cm Scope of Delivery  - Wirehooder - Operator platforms

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling system and accessories. For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully functional workshop device and features state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling Condition: very good, fully functional Location: Graz _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. hose set • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 is carried out directly via the back of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. Ledpfx Abjyxvwij Ushl • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for demanding applications in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) _____ The device is in a ready-to-use condition. Inspection and test run can be arranged.

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. Ledjr Ix Igspfx Ab Ushl The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal

Condition: good (used), Year of construction: 1995, NC sinker EDM machine AGIE AGIETRON INTEGRAL 2 Year of manufacture: 1995 Travel in X: 350 mm Travel in Y: 250 mm Travel in Z: 350 mm Rapid traverse: approx. 720 mm/min Axes: 4 (X, Y, Z, C) Work area Table size: 600 × 450 mm Maximum workpiece dimensions: approx. 860 × 620 × 350 mm Maximum workpiece weight: 400 kg Maximum electrode weight: 100 kg Internal dimensions of the work tank: approx. 830 × 590 × 350 mm Distance from table to quill: 170 – 520 mm MACHINE DETAILS Control: AGIEMATIC T Generator: AGIEPULS 60 Power connection: 400 V / 50 Hz Dimensions & Weight Dimensions (L x W x H): approx. 3,000 × 1,700 × 2,580 mm Machine weight: approx. 2,550 kg Lhsdpfx Abozzyhus Usl

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Lhsdpjzkbirefx Ab Uel Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 276 kg, load capacity: 22 kg, arm reach: 1,612 mm, controller manufacturer: KUKA, controller model: KR C4, teach pendant manufacturer: KUKA, teach pendant model: KUKA SmartPAD, warranty duration: 12 months, Equipment: documentation/manual, KUKA KR 22 R1610-2 with KR C4 – NEW / 0 operating hours We offer a new and unused KUKA KR 22 R1610-2 industrial robot with KUKA KR C4 controller. Manufactured in 10/2022 with 0 operating hours. Robot specifications - Model: KUKA KR 22 R1610-2 - Payload: 22 kg - Reach: 1612 mm - Year of manufacture: 10/2022 - Operating hours: 0 h / NEW - Weight: 276 kg - Cable set: INT 076ST1610 - Configuration: ES13 116 CTR PNT EPS AIR VAC GND - Colour: KUKA Industrial Orange Controller - KUKA KR C4 EU Lhodezyyzljpfx Ab Uol - KSS 8.3 - Servo configuration SC5.1 - 400 V transformerless power supply - Parallel Safety interface X11 - Ethernet interface XF277 - CSP 2x USB 3.0 / 1x RJ45 KLI - Cabinet base with spacer - Set of 75 mm rollers Installed KUKA software & technology packages - KUKA.PLC ProConOS4-1 4.1 - KUKA.DiagnoseSafety 2.1 The robot is supplied with the complete configuration according to the attached technical specification. 12-month warranty included. CUSTOM CONFIGURATION AVAILABLE The robot can be supplied in its current configuration or customized according to the customer's application and technical requirements. Depending on the application, RSA Systems can provide configuration and installation of suitable KUKA software and technology packages, communication interfaces and fieldbus systems, as well as configuration for external axes and other application-specific requirements. Additional services available on request Installation & commissioning | Programming & optimization | Integration & automation | Custom robot configuration | Technical support | ISO 9283 metrology & calibration | KUKA robot training Inspection and functional demonstration of the robot at our facility is possible by appointment. Send us your application and technical requirements and we can prepare the robot configuration according to your project. RSA Systems s.r.o. Experience. Reliability. No Compromise.

Condition: good (used), A. COSTA PUMA/2/75 – 2 x 55 kW TWO-ARBOR MULTI-SAW For sale: a professional Italian two-arbor multi-saw from A. COSTA, model PUMA/2/75. This machine is designed for longitudinal resawing of wooden elements. It features a heavy-duty, industrial design with two saw arbors and a crawler feed system. MACHINE SPECIFICATIONS: • Manufacturer: A. COSTA S.p.A. – Marano Vicentino, Italy • Model: PUMA/2/75 • Machine number: 90EC3 • Year of manufacture: 1990 • Type: two-arbor multi-saw • Power supply: 380 V • Frequency: 50 Hz • Rated power (from nameplate): 114 kW • Rated current (from nameplate): 217 A • Main motors: 2 x 55 kW • Feed motor: 4 kW • Maximum cutting height: 160 mm • Two saw arbors • Crawler feed system • Material pressure rollers • Adjustment of working unit settings • Kickback protection • Central lubrication system • Electric control panel • Cutting width: 350 mm The machine's design allows for efficient resawing of wood using two saw units – a lower and an upper arbor. NAMEPLATE: A. COSTA S.p.A. Marano Vicentino – Italy MODEL: PUMA/2/75 NO.: 90EC3 Ljdpfsz D Nqbex Ab Ushl YEAR: 1990 POWER: 114 kW CURRENT: 217 A VOLTAGE: 380 V FREQUENCY: 50 Hz USED MACHINE – CONDITION AS SHOWN IN THE PHOTOS. The machine is preserved in its original, heavy-duty industrial construction. It is sold in the condition and configuration shown in the photos. Due to the machine's size and weight, on-site pickup and transport by the buyer are preferred. The machine can be inspected before purchase.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 13137, Capacity: approx. 50-56 kg/h (depending on the dough, filling, etc.) Overhaul year: 2026 – new electronics, housings, insulation, gas reducer, all bearings + motors are new or refurbished. Model: EWB 2/2 Two dough belts. Set including a dough tank and pumps – stepless speed control via a frequency inverter. Lhsdozwmz Hjpfx Ab Uel Power source: CNG/LPG 50 Hz, power: 5.3 kW

Condition: new, Year of construction: 2021, functionality: fully functional, overall weight: 1,126 kg, load capacity: 210 kg, arm reach: 2,701 mm, controller manufacturer: KUKA, controller model: KR C4, teach pendant manufacturer: KUKA, teach pendant model: KUKA smartPAD, warranty duration: 12 months, Equipment: documentation/manual, KUKA KR 210 R2700-2 with KR C4 – NEW / 0 operating hours We offer a new and unused KUKA KR 210 R2700-2 industrial robot with KUKA KR C4 controller. Manufactured in 10/2021 with 0 operating hours. Robot specifications Model: KUKA KR 210 R2700-2 Payload: 210 kg Reach: 2701 mm Year of manufacture: 10/2021 Ljdpfx Aezyambob Uohl Operating hours: 0 h / NEW Weight: 1126 kg Colour: RAL 7016 Cable set: INT 084ST2700 Controller KUKA KR C4 EU KSS 8.6 Servo configuration SC4 400 V transformerless power supply Siemens SCALANCE X208 Interface X42 Ethernet interfaces X67.1–X67.3 24 V power interface X55 27 V power / USB interfaces X51 / X56 CSP 2x USB 3.0 Cabinet base with spacer Set of 75 mm rollers Installed KUKA software & technology packages KUKA.SafeOperation 3.5 KUKA.UserTech 4.0 KUKA.LoadDataDetermination 7.1 KUKA.GripperSpotTech 5.0 KUKA.RobotSensorInterface 4.1 KUKA.DeviceConnector KUKA.WorkVisual 6.0 KUKA.ActivationManagementTool The robot is supplied with the complete configuration according to the attached technical specification. 12-month warranty included. CUSTOM CONFIGURATION AVAILABLE The robot can be supplied in its current configuration or customized according to the customer's application and technical requirements. Depending on the application, RSA Systems can provide configuration and installation of suitable KUKA software and technology packages, communication interfaces and fieldbus systems, as well as configuration for external axes and other application-specific requirements. Additional services available on request Installation & commissioning | Programming & optimization | Integration & automation | Custom robot configuration | Technical support | ISO 9283 metrology & calibration | KUKA robot training Inspection and functional demonstration of the robot at our facility is possible by appointment. Send us your application and technical requirements and we can prepare the robot configuration according to your project. RSA Systems s.r.o. Experience. Reliability. No Compromise.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws Lhsdpfx Aszzqm Ueb Ujl -Interchangeable jaws: Top jaw set 3-piece soft 2 sets -Width: 30 mm -Shipping/Price: complete -Dimensions total: 125/180/H50 mm -Total weight: 5.9 kg

Condition: excellent (used), Year of construction: 1974, Catalog number: 7685 TECHNICAL DATA - inlet width: 440mm - inlet height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen size: 50x50mm - toothed pull shaft, top and bottom - shaft motor: 0.78/1.1kW - electric automatic reversing (with adjustable settings) - with conveyor belt - length of feed belt: 4006mm - width of feed belt: 380mm - belt feed, forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight: approximately 2000kg ADVANTAGES – German-made – with conveyor belt feeder – automatic reversing – used shredder, very good condition Lhsdpfx Abjzruc Us Ujl Net price: 76,900 PLN Net price: 17,884 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters Lhsdpfx Aboyz Dhzo Uol - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Year of construction: 2020, condition: good (used), Lode Valiant 2 Sport Treadmill (2021/2022) – Lightly used in a clinical research setting – Includes a 1-month warranty. Smooth start at 0.0 km/h with precise control from 1.0–25.0 km/h in 0.1 km/h increments. The low-profile front cover leaves the athlete’s stride unobstructed and provides space for a mirror or camera at the front for real-time technique monitoring. Generous running deck: 70 × 190 cm standard; incline 0–25% for versatile protocols. XL option: 80 × 200 cm deck for larger subjects or high-speed work. Use cases: Sports medicine labs, CPET/stress testing, gait analysis, and high-performance training, where fine speed control and seamless device integration are essential. Also included: A comprehensive set of safety and usability features designed for continuous clinical use. Speed: Max: 25 km/h (15.5 mph) Ledszhicuspfx Ab Uohl Min (operational): 1.0 km/h (0.6 mph) Adjustment step: 0.1 km/h (0.1 mph) Incline: Positive incline: 0–25% Adjustment step: 0.5% Optional decline: down to −10% (with accessory) Accuracy: Speed accuracy: ±5% Incline accuracy: ±0.5% Comfort / Capacity: Max user weight: 225 kg (496 lb) Certification: CE class Im (MDD 93/42/EEC) With optional SpO₂: CE class IIa With optional BPM: CE class IIa IECEE CB: certified

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: 125102018, Manufacturer: TMA Automation sp. z o.o., Year of production: 2018 Lodpfx Aszwdx Neb Uehl SET DESCRIPTION For sale is a complete set of two cooperating Cartesian robots manufactured by the Polish company TMA Automation, designed for use with injection molding machines. The set consists of a MIDI LINE linear robot and a UNI LINE in-mold labeling (IML) module. The robots were used in a production facility and are in a condition confirmed by technical documentation. The sale includes complete documentation. TECHNICAL DATA MIDI LINE robot (serial number: 125102018) Dimensions (L x W x H) 2400 x 2060 x 1435 mm (variable height), Weight 600 kg, Payload 8 kg, Z-axis reach 2300 mm, Y-axis reach 1400 mm, X-axis reach 1400 mm, Supply voltage 400 V / 50 Hz, Power 4.5 kW, Operating air pressure 6.5 bar UNI LINE robot with IML module (serial number: 126102018) Dimensions (L x W x H) 2540 x 1000 (1370) x 2090 mm, Weight 550 kg, Payload 8 kg, Stacker reach 1100 mm, Supply voltage 400 V / 50 Hz, Power 1.5 kW, Operating air pressure 6.5 bar EQUIPMENT INCLUDED Touchscreen control panel with a safety STOP button (e-stop), control software with the following functions: automatic mode, manual mode, no-label mode, no-part removal mode, program archive, graph and alarm module; complete technical documentation, CE marking on both machines. TECHNICAL CONDITION Robots from 2018, operated in industrial conditions (plastics injection molding). Control panel active; at the time of the photographs, program PRG 2 was selected, operating speeds: manual 22%, automatic 17%. The photographs show a red robot stop signal (standby condition, not an emergency). Recommended before purchase: personal inspection and test run at the installation site. SALES CONDITIONS Sold only as a set. Self-collection only. Transportation is the buyer's responsibility.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, load capacity: 10 kg, arm reach: 901 mm, KUKA industrial robots (package of 7 units) Model series: AGILUS-2 Series Type: KR 10 R900-2 (Item no. 001032964) Year of manufacture: 2021 Commissioned: 2022 Quantity: 7 units Technical data: Payload: 10 kg Reach: 901 mm Net weight: 37 kg Ledpexdwygefx Ab Ujhl Repeatability: ±0.03 mm Protection class: IP65 Application areas: Handling, assembly, packaging, machine tending, small-series production Scope of delivery (per unit): • KUKA industrial robot KR 10 R900-2 • KUKA control unit KRC4 compact • KUKA SmartPad (operator panel) • Connection cable set Condition: • Used, well-maintained from ongoing production • Fully functional • Immediately available

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 8151, rotary table diameter: 800 mm, grinding height: 750 mm, workpiece weight (max.): 800 kg, total height: 4,100 mm, total width: 26,650 mm, total length: 44,000 mm, feed length Y-axis: 750 mm, feed length Z-axis: 550 mm, overall weight: 13,000 kg, grinding wheel diameter: 400 mm, disc diameter: 400 mm, grinding spindle speed: 1,460 rpm, grinding diameter: 800 mm, control cabinet width: 650 mm, type of input current: DC, control cabinet height: 1,900 mm, control cabinet length: 1,800 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,460 rpm, table load: 900 kg, workpiece diameter (max.): 850 mm, grinding wheel width: 60 mm, table width: 1,240 mm, power: 35 kW (47.59 HP), rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 2 m/min, space requirement height: 4,100 mm, space requirement length: 5,100 mm, space requirement width: 2,655 mm, Good day, For sale is a well-preserved and completely functional Sielemann cylindrical grinding machine for the following applications: surface grinding, internal grinding and external grinding. The machine has a swivel stand with 3 different sanding heads for the respective area of application. Complete machine documentation is available and can be presented upon inspection. The Sielemann offered here has always been serviced and maintained, most recently the components listed below were replaced: - 3x New weight compensation cylinders - 1x new hydraulic unit (complete) - New guideway covers - Revised rotary table group Technical data Machine length: 4.400mm Machine width: 2,655mm Machine height: 4.100mm Machine weight: 13.000Kg Control cabinet width: 650mm Control cabinet height: 1.900mm Control cabinet length: 1.800mm Grinding table diameter: 800mm Grinding table load capacity: 800kg Grinding table drive power: 0.21 - 14.5KW Grinding table speed: 100 1/min (both directions) Grinding table workpiece clamping: Magnetic clamping plate incl. T-slots Z-axis travel (grinding table): 550mm Maximum grinding height (Y): 750mm Lubrication pump Masch. Bed: 0,18KW Lubrication pump Masch. Column: 0,1KW Leak oil pump: 0,065KW Hydraulic pump: 1.5KW 1) External round grinding head Spindle drive power: 11KW Spindle speed: 1,450 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min 2) Internal round grinding head Spindle drive power: 5.5KW Grinding wheel: Variable Feed speed (Y): 100 mm/min 3) Flat-round sanding head Spindle drive power: 11KW Spindle speed: 1,800 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min Viewing appointments possible at short notice by arrangement !!! With kind regards Lhsdpfx Aorntireb Uol R.Suckow / Managing Director UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte Stukenbrock Görlitzerstraße 9

Condition: excellent (used), Year of construction: 2022, Technical data: - Total filter capacity approx. 150 l/min - Filter fineness approx. 3 μm nominal - Dimensions (W x D x H) approx. 1400 x 1300 x 1100 mm - Tank capacity approx. 800 l Equipment: - 2 filter groups, individually backwashable, each with 1 TCF filter tower - 1 filter pump - 1 pneumatic unit - 1 manual sludge removal system with sludge bag - Internal system piping - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 1 unit of machine supply pump for supplying the machine with filtered coolant as a submersible centrifugal pump Technical data: Ljdpfxezk Ek Tj Ab Ushl - Flow rate: approx. 70 l/min - Delivery pressure: approx. 5 bar - Drive: 400V, 50Hz 1 unit of cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 80-120 l/min - Delivery pressure: approx. 1.5 bar - Drive: 400V, 50Hz, IE3

Condition: ready for operation (used), Year of construction: 2007, operating hours: 10,000 h, load capacity: 360 kg, arm reach: 3,326 mm, controller manufacturer: KUKA, controller model: KRC2, teach pendant model: KCP2, The KUKA KR360-2 is a high-performance 6-axis industrial robot designed for heavy-duty applications. With a 360 kg payload and 3326 mm reach, it is ideal for: Lsdpfx Aoxt I D Iob Ushl Material handling – palletizing, loading/unloading, and large part transfer Welding – precise and stable spot or arc welding of large structures Machining – milling, grinding, and cutting with high rigidity Assembly – handling and positioning of large components Foundry and automotive – suitable for casting, mold handling, and car body assembly Model: KR360-2 Payload: 360kg Arm Reach: 3326 mm or 2826 mm Condition: Tested & Painted Manipulator: Year 2007 Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 400 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs.

Year of construction: 1992, condition: used, machine/vehicle number: 1784, ITEK Graphix 985CF / Ryobi 3202MCS – 2-colour continuous forms offset press Year: 1992 Condition: used Price: €3,250 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands ITEK Graphix 985CF, the ITEK version of the Ryobi 3202MCS, 2-colour offset press for printing continuous stationery and fanfold forms. The machine is equipped with tractor feed and pack-to-pack delivery. The press comes from a small printing company which ceased its activities due to serious health problems of the owner. The machine was mainly used for single-colour printing. After arrival at our warehouse, the machine was thoroughly cleaned. The machine runs and turns mechanically, but it has not printed again after cleaning. Therefore, no recent print test is available. Lsdpfezqhgdex Ab Uehl The electronic counter is currently not working because its internal battery is exhausted. The total impression count is therefore unknown. Technical specifications * Number of colours: 2 * Application: continuous stationery / fanfold forms * Feeding system: tractor feed * Delivery: pack-to-pack * Paper width: approximately 127–356 mm / 5–14 inches * Form length: approximately 178–356 mm / 7–14 inches * Length adjustment: in increments of 1/6 inch * Maximum printing size: approximately 330 × 355.6 mm * Paper thickness: approximately 0.06–0.20 mm * Production speed: approximately 4,000–6,000 forms per hour * Dampening system: molleton * Electrical supply: 230 V, single phase, 50 Hz * Power consumption: approximately 550 W * Dimensions: approximately 1,500 × 900 × 1,410 mm * Weight: approximately 550 kg Included * Original Ryobi operating manual * Original Ryobi parts catalogue * Safety documentation * Various loose rollers * Additional trays, shafts, rods and tools * Other accessories shown in the photographs The machine is offered in its present condition and can be inspected by appointment in Son en Breugel, the Netherlands.

Condition: good (used), Year of construction: 1966, Universal milling machine cover FP2 -WKG 512- On offer here is a universal milling machine from the manufacturer Deckel, type FP2. Lhjdpfjurk Exsx Ab Ujl Technical data Manufacturer: Deckel Model: FP 2 Year of manufacture: 1966 Clamping surface: 730 x 240 mm Hydr. vice jaw width: 125 mm Clamping range: up to 225 mm Collet set: 0.5 mm - 17.5 mm

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 7,800 mm, total width: 2,200 mm, overall weight: 2,100 kg, 2020 HEBBECKER VERSAJET II VJ-II-2-9090-4180 – Industrial Gas-Heated Textile Tunnel Dryer Professional industrial HEBBECKER VERSAJET II gas-heated textile tunnel dryer, manufactured in 2020 and designed for continuous, high-volume textile screen-printing production. The machine is equipped with a dual conveyor belt system (2 × 850 mm), allowing two production lanes to be used simultaneously. The touchscreen control panel provides convenient adjustment of the conveyor settings and drying temperature. The direct gas-heating system provides fast heat-up, high efficiency and uniform curing, while keeping electrical energy consumption very low compared with conventional electrically heated dryers. Key Features Manufacturer: HEBBECKER GmbH Model: VERSAJET II VJ-II-2-9090-4180 Year of manufacture: 2020 Serial No.: 2001948 Machine type: Industrial textile tunnel dryer Heating system: Direct gas heating Gas heating capacity: 40 kW Dual conveyor belt: 2 × 850 mm Lhodpfsy Ty Sgox Ab Ujl Heating zone length: 5,565 mm Electronic temperature control Temperature stability: ±2°C Fast heat-up time Designed for continuous industrial production Suitable for textile screen-printing curing and drying Heavy-duty industrial construction Low electrical energy requirement Quiet operation Dual Conveyor System The VERSAJET II is equipped with two separate conveyor belts, providing two parallel production lanes. The touchscreen interface provides individual conveyor settings, making the dual-belt configuration particularly useful when processing different garments, print types or production batches simultaneously. Energy Efficiency The dryer uses direct gas heating without a heat exchanger, allowing the gas energy to be transferred efficiently into the drying process. According to the manufacturer's specifications, the system can provide more than 50% energy savings compared with electrically heated dryers, depending on operating conditions and configuration. Technical Data Electrical supply: 400 V / 3-phase / 50 Hz Electrical power: 3.2 kW Current: 5.1 A Fuse: 16 A Gas heating capacity: 40 kW Gas pressure: 30 mbar Conveyor configuration: Dual belt Belt width: 2 × 850 mm Heating zone length: 5,565 mm Machine weight: approx. 2,100 kg The HEBBECKER VERSAJET II is an excellent solution for professional textile printing companies looking for a high-capacity, energy-efficient gas dryer with a dual conveyor system. Machine available for inspection.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, load capacity: 180 kg, arm reach: 3,100 mm, As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. We can help you with: - Welding - Cutting - Machine Feeding - Palletising - Depalletising - Marble Processing - Apgant Machine Feeding and Metal Bending Brand: KUKA Model: KR 240 L180-2 2000 Lhsdpfxjzpxxbs Ab Uol Year: 2006 Control Cabin: KRC2 ED05 Rated Payload: 180kg Access Distance: 3100mm Contents: Manipulator + Control Cabin + All Wiring Sets + Teach Pendant + Shipping: NOT included in the price Payment: 100% payment prior to collection Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.