Universal milling and drilling unit

DECKEL FP 2

Condition: new, centre height // mm total power requirement / kW weight of the machine ca. / t required space / m Hsdjzcgfqopfx Afljfk Parts machine for lids FP1 / FP2 Condition: NEW

Condition: good (used), Year of construction: 1956, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW Hfodpstzf N Rjfx Aflek -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg

Condition: used, power capacity / kW volt / V ampere / A Hfodpfx Afsy S Eb Roljk DECKEL MONITOR Bildschirm DIALOG FP2 / FP3

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Hfedswid Spjpfx Aflok Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: used, This listing is for the APV Gaulin T Series Homogenizer The unit is in full working condition and is ready for immediate use The Gaulin T Series homogenizers, developed by SPX FLOW under the APV brand, are high-pressure, positive displacement reciprocating plunger pumps designed for demanding applications in industries such as dairy, food and beverage, pharmaceuticals, chemicals, and cosmetics. Key Features High Pressure Capability: Models like the Gaulin 132T and 125T can handle pressures up to 600 bar (approximately 8,700 psi), making them suitable for applications requiring intense homogenization. Flow Rate: These homogenizers can process flow rates ranging from 1,000 to 25,000 liters per hour (LPH), accommodating various production scales. Design Options: The Gaulin T Series offers both mono-block and three-piece valve housing designs, allowing for flexibility in maintenance and customization. Hygienic Construction: Constructed with stainless steel or duplex materials, these homogenizers feature 3-A sanitary design, making them suitable for hygienic applications. Maintenance-Friendly: The design includes features like hydraulic valve actuators, easy access to key components, and modular electrical controls, simplifying maintenance and reducing downtime. Applications Gaulin T Series homogenizers are ideal for applications such as: Dairy Processing: Homogenization of milk, cream, and other dairy products. Food and Beverage: Processing of sauces, dressings, and beverages. Pharmaceuticals and Cosmetics: Manufacturing of emulsions, creams, and lotions. Hsdpfxjxhf Tvo Afljfk Chemical Processing: Production of paints, coatings, and other chemical products

Condition: refurbished (used), Year of construction: 1968, travel distance X-axis: 800 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, quill travel distance: 80 mm, total length: 1,000 mm, table width: 520 mm, table length: 1,000 mm, table load: 2,000 kg, overall weight: 2,500 kg, input voltage: 400 V, workpiece weight (max.): 2,000 kg, We are offering this refurbished DECKEL FP2LB milling machine, year of manufacture 1968. Manufacturer: DECKEL Model: FP2LB Year of manufacture: 1968 Condition: refurbished Machine type: milling machine If you have any questions or need further information, please feel free to send us a message or give us a call. Hsdpfxex Sdxzs Afljfk

Year of construction: 1987, condition: ready for operation (used), Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferred. Hedjy I Adhopfx Aflsfk

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray / RAL5008 gray-blue Mach. No.: 52860/08 Milling head number: 7296/80 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system Hfedpemhfrrefx Afljk - Operating instructions Used as seen The machine corresponds technically to the state of the year of manufacture.

Condition: ready for operation (used), Year of construction: 2019, A Deckel FP2 universal tool milling machine completely overhauled in 2019 is available. Travel X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, speed: 2000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. On-site inspection is possible. Hodpovf Iy Dsfx Aflofk

Condition: used, x-travel 300 mm y-travel 300 mm z-travel 400 mm Control Dialog 11 turning speed range - main spindle 40 - 4000 min/-1 tool taper SK 40 swivellable +/- 90 ° quill stroke 80 mm In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Accessories: Hsdpszq Hlfjfx Aflefk - Cabin Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock Hfjdpfxewrm Dte Aflek >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: ready for operation (used), Tool milling machine Deckel FP 2 / 3-axis digital display "NEW" / ORIGINAL CONDITION from a university -Travel ranges X/Y/Z 400x200x400mm -Table clamping surface 700x350mm -Speed range 40-2000 rpm -Feeds and rapid traverses in all three axes Hjdpfx Aeztdl Isfljfk -Tool holder ISO 40 -Vertical / Horizontal milling attachment -Fixed swivel table -Coolant system -3-axis digital display "NEW" -Spindle nut X-axis "NEW" -Machine feet -Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1600 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1975, Deckel FP2 – 3-axis milling machine with Fagor digital display. The machine is in good condition and comes from a training department. It features a universal swivel rotary table and an SK 40 spindle mount. Accessories include various collets and milling arbors. Good, operational condition. Can be demonstrated under power by arrangement. Hsdpfx Aezruudeflefk

Condition: used, x-travel 800 mm y-travel 400 mm Hfedpfx Aeqpl Uuefljk z-travel 300 mm digital readout Heidenhain table surface area 1000 x 520 mm turning speed range 40 x 2000 U/min spindle taper SK 40 total power requirement 2,2 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 1700 x 1600 x 1800 m

Condition: used, Counter bearing and adapter for milling machine for horizontal milling Counter bearing and adapter (counterholder) for DECKEL milling machine (Bearing block with dovetail mounting adapter DECKEL FP1 + FP2) Type 9570 Dovetail width, narrow: approx. 72 mm Dovetail width, wide: approx. 88 mm Dovetail height: approx. 15 mm Length (bearing block): 133 mm Width (bearing block): 50 mm Total height (bearing block): 105 mm Bearing bore: Ø 17 mm (with bronze bearing bushing) Distance from bore axis to dovetail mounting face: approx. 82.5 mm (center height) Hsdpfx Afexcbl Deljfk - Adapter fits dovetail and mounting surface, raises center height by 22.5 mm to 105 mm Total length (dovetail rail): 635 mm Weight: 3.8 kg Very good condition