Used Length Profiler for sale (34,557)

Condition: used, clear span: 3,600 mm, total length: 18,600 mm, total height: 5,000 mm, load per truss pair (max.): 4,000 kg, number of shelf rows: 1, Technical data for the pallet racking system: Racking system: Bito Type: PRO Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 18,600 mm Number of bays per racking row: 05 units, each 3,600 mm Number of levels plus base level: 02 units Included in the scope of delivery: 06x Pallet racking uprights, used Material color: sendzimir galvanized Upright profile: 100 x 65 x 2.0 mm Upright type: P3 Ljdpjz Azktjfx Ab Usrt Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (bolted truss) 5,000 mm high 1,100 mm deep 20x Pallet racking beams, used Material color: blue Box profile: 150 x 50 mm Beam type: PT150S Clear span: 3,600 mm Max. load per beam pair: 4,000 kg with evenly distributed load 40x Locking pins, used Material color: sendzimir galvanized For securing the longitudinal beams against unintentional lifting 24x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Shims, used Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, clear span: 2,700 mm, total length: 14,040 mm, total height: 4,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 1, Technical data for the pallet racking system: Racking system: Bito Type: Pro Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 14,040 mm Number of bays per racking row: 05 units, each 2,700 mm Number of levels including base level: 02 units Technical data for volume: Pallet spaces per bay: 09 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): 1,000 kg Included in the scope of delivery: 06x Pallet racking uprights, used Material color: Sendzimir galvanized Type: P 2 Profile dimensions: 90 x 65 x 1.75 mm Including cross and diagonal bracing, Base plates The uprights are pre-assembled (bolted framework) 4,500 mm high 1,100 mm deep 20x Pallet racking beam, used Material color: blue Box profile: 120 x 50 mm Beam type: PT120M Connector: 5 hooks Clear width: 2,700 mm Max. load per beam pair: 3,000 kg, with evenly distributed load 40x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal members against unintentional lifting 06x Upright protection, used Material color: yellow Overall height: approx. 715 mm Overall width: approx. 99 mm Internal width: approx. 92 mm Leg dimensions: approx. 65 x 65 mm Material thickness: approx. 3.5 mm Weight per unit: 4.96 kg Quantity: 01x / Pallet racking upright 24x Bolt anchor, new Manufacturer: Hilti Type: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 12x Shimming plate, used Material: Fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign With information on bay and shelf loads, Manufacturer and order number Dimensions: 420 x 297 x 3 mm Lrsdpfx Asz Azthsb Ust General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Lrsdpfx Abjyhcabs Ujt Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: like new (used), Year of construction: 2026, operating hours: 8 h, functionality: fully functional, machine/vehicle number: SG202640, total length: 1,500 mm, power: 4 kW (5.44 HP), overall weight: 650 kg, total width: 800 mm, total height: 1,150 mm, input voltage: 380 V, warranty duration: 12 months, Pipe Shrinking, Profile Forming Machine SG40NC Machine Model: SG40NC Product Description: Microcomputer-controlled and hydraulically driven. Equipped with a mobile foot switch featuring three functions: automatic operation, emergency stop, and continuous emergency stop, ensuring high safety. Capable of multiple processing methods including tube Forming, tube expanding, tube end blunting, and bulging. Processed shapes include concave-convex joints, elongated, flat, square, flared, angled, V-shaped, open elbow, etc. Molds can be changed according to the user’s processed products. Mold replacement is simple and convenient, facilitating flexible production. The machine has a compact and sturdy structure, uses hydraulic power, operates stably with a high yield rate, minimal vibration, and low noise. It can perform tube end reduction, expansion, bulging, upsetting rib forming, and other shape forming processes. Suitable for processing various shapes at the Lrjdoyak Ikepfx Ab Uot connecting parts of pipe fittings (for insertion), automotive oil pipes, air ducts, water pipes, and air conditioning pipes. Maximum Tube Forming Capacity mm Ø40×2mm Maximum Tube Forming Length mm 100mm Motor Power kW 4 Weight kg 600

Condition: used, Year of construction: 1997, Profiling line, consisting of DEP Gabbiani + Weinig planing machine Lrjdpfezuzfbex Ab Ust DEP Manufacturer: Gabbiani Type: T-Module 80/1600 Year of manufacture: 1997 Planing machine Manufacturer: Weinig Type: 22 BL Year of manufacture: 1995 Technical data of the DEP - 6 machining motors per side - 2 fixed scoring units, 3.2 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 slotting units: 12.5 HP / 3000 + 4500 RPM - 2 free spaces - 1 feed motor: 4 HP / 1400 RPM Angle transfer between DEP and planing machine - Length: 290 - 1600 mm (1800 mm) - Width: 18 - 150 mm - Thickness: 5.5 - 50 mm - Density: 600 kg/m³ - Output max.: 150 workpieces/min - Belt conveyor after the double-end profiler - Toothed belt conveyor with brush attachment as counter holder - Cam conveyor for singulation - Toothed belt conveyor as buffer section - Longitudinal discharge - Roller conveyor before the planing machine - Control: Vipa, compatible with Siemens S7 300 - Safety technology Protective door switches: 3 Safety light barriers: 1 Technical data of the planing machine Working width and working height - Working width: 20 - 230 mm (with tool diameter 125 mm) - Working height: 9 - 140 mm (with tool diameter 125 mm) Infeed table - Length: 2000 mm - Adjustment range of the jointer table: 10 mm - Adjustment range of the fence: 10 mm Surfacing table - Length: 1200 mm - Adjustment range of the table: 10 mm - Adjustment range of the fence: 10 mm Jointer spindle - Motor power: 5.5 - 15 kW Thicknessing spindle - Motor power: 5.5 - 11 kW Left spindle - Motor power: 5.5 - 11 kW 2. Right spindle - Motor power: 5.5 - 11 kW Top spindle - Motor power: 5.5 - 22 kW Bottom spindle - Motor power: 5.5 - 22 kW Universal spindle - Motor power: 5.5 - 11 kW Feed - Cardan feed, continuously adjustable: approx. 6-36 m/min - Motor power: 4 - 8.6 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, clear span: 3,595 mm, total length: 18,575 mm, load per truss pair (max.): 2,650 kg, Technical data for the pallet racking system: Racking system: Mecalux Technical data for installation: Number of racking bays: 01 unit Length per racking bay: approx. 18,575 mm Number of bays per racking bay: 05 units Number of levels including floor level: 02 units Ljdpfx Ajz A A Aujb Uort Technical data for volume: Pallet spaces per bay: 12 units Pallet spaces per row: 60 units Total pallet spaces: 60 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): 660 kg Included in the scope of supply: 06x Pallet racking uprights, used Material color: blue Upright profile dimensions: 100 x 69 x 2.0 mm Upright type: M-101 Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted framework) 2,500 mm high 1,100 mm deep 20x Pallet racking beams, used Material color: RAL 2001 orange Beam type: 2C-S 1315 Box profile: 130 x 50 mm Clear width: 3,595 mm Maximum load per beam pair: 2,650 kg with evenly distributed load 40x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting out 24x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Shimming plate, used Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign With information on bay and frame loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 2008, Profiling machine Manufacturer: SCM Type: Superset NTE Year of construction: 2008 Technical data - Touchscreen control for the machine with 6 spindles + UNIWAVE - Spindle speed 8,300 rpm - Working width 240 mm, working height 125 mm, electronic - Touchscreen control MOBILE 10 - HSK 85S - SPINDLE QUICK-CHANGE SYSTEM T-SET - QUICK-CLAMPING DEVICE for tools - 7 shafts as a UNIWAVE, suitable for separating - 2 feed units after the upper spindles to reduce the center distance from 620 to 450 mm - Motor-driven feed roller in the working table, basic equipment for forced lubrication, electronic horizontal positioning, electronic adjustment of the tool diameter (setup) - Manual pump for lubricating the working table - WITH machining tool - Min. working width (finished size) mm 15 - Max. working width (finished size) mm 240 - Min. length of the individual workpiece mm 450 - Feed speed controlled via inverter 6 - 36 m/min, feed motor power kW 4 - Motor power surfacing spindle kW 7.5, quick-clamping device - Motor power vertical spindle right kW 7.5, Powerlock HSK 85 - Motor power vertical spindle left kW 7.5, Powerlock HSK 85 - Motor power upper horizontal spindle kW 7.5, quick-clamping device - Motor power 2nd upper horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power lower horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power universal spindle kW 7.5, quick-clamping device - Spindle speed rpm 6000/8300 - Spindle diameter mm 40 - Spindle receiving length vertical mm 220 - Spindle receiving length horizontal mm 250 - Axial adjustment range of the vertical spindles standard mm 75 - Axial adjustment range of the horizontal spindles standard mm 45 min. max. - Sweeping circle diameter of the surfacing cutter mm 120/140 mm min. max. - Sweeping circle diameter of the profiling spindles mm 100/200 - Profiling depth of the 2nd lower shaft with a tool diameter of mm 200 mm 15 - Diameter of the spindle cylinders mm 120 - Diameter of the feed rollers mm 140 - Infeed table length mm 2500 - Adjustment range of the infeed table and infeed fence 10 mm - Motor-driven feed roller in the outfeed table - Manual central lubrication - On/off switch for the feed unit before the surfacing cutter - Horizontal pressure pads before the surfacing cutter with on/off switch - Pressure shoes at the front on the protective cover of the horizontal spindle(s), hardened insert in the working table in front of the surfacing cutter - Pneumatic pressure shoes in front of the upper horizontal spindles - Horizontal pressure device in front of the surfacing cutter, can be switched on from the control panel - 2 feed rollers 140 x 25 per feed shaft - Lighting inside the protective cover - Extraction capacity min. 10,443 m3/h - Including extraction hood! - Including Powerlock mounting bracket - All 240 mm heads, horizontally arranged, and fixed tools on HSK spindles are included. - Spare parts catalog: Complete, 8 PDF catalogs available Note: Not all tools shown are part of this offer. Lrodpfozuzfhjx Ab Ust Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, clear span: 2,700 mm, total length: 14,100 mm, load per truss pair (max.): 3,000 kg, Technical data for the pallet racking system: Racking system: Mecalux Technical data for installation: Lrsdpfxez A Ayaj Ab Ust Number of racking rows: 01 unit Length per racking row: approx. 14,100 mm Number of bays / racking row: 05 units, each 2,700 mm Number of levels including base level: 02 units Technical data for capacity: Pallet spaces per bay: 09 units Pallet spaces per racking row: 45 units Total pallet spaces: 45 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n/a Weight per pallet (max.): 1,000 kg Included in the scope of supply: 06x used pallet racking uprights Material color: blue Upright type: A103 Upright profile: 100 x 79 x 3.00 mm Incl. cross and diagonal bracing, Base plates The uprights are pre-assembled (bolted frame structure) 2,300 mm high 1,100 mm deep 20x new pallet racking beams Material color: RAL 2001 orange Box profile: 110 x 50 mm Beam type: 2C-S 1115 Clear width: 2,700 mm Agraffe: G.E. - 3 Max. load per beam pair: 3,000 kg, with evenly distributed load 40x integrated safety pin, new Material color: orange For securing the longitudinal beams against unintentional lifting 24x heavy-duty dowels, new Manufacturer: MKT Design: galvanized steel Approved for: uncracked concrete Through-installation: M 12-13/95 12x leveling plates, used Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x load signs With information on bay and shelf loads, manufacturer and batch number Dimensions: 297 x 210 x 2 mm Note: The images are example images to illustrate the material. The quantities shown may differ from the scope of supply. General information about the item: This item is only offered for collection. Any additional desired transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of supply.

Condition: used, clear span: 2,880 mm, total length: 12,450 mm, total height: 3,930 mm, load per truss pair (max.): 1,600 kg, Technical data for the pallet racking system: Racking system: Hovuma Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 12,450 mm Number of bays per racking row: 04 units, each 2,880 mm Number of levels plus base level: 03 units Included in the scope of delivery: 05x Pallet racking uprights, used Material color: blue Profile dimensions: C 70 x 40 x 12 x 3.0 mm Lredpfjz Az Txox Ab Uot Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (welded framework) 3,930 mm high 870 mm deep 24x Pallet racking beams, used Material color: green INP profile: 80 x 42 mm Clear span: 2,880 mm Max. load per beam pair 1,600 kg with evenly distributed load 48x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 20x Bolt anchors, new Manufacturer: Hilti Type: HST2 V3 M12x105 5-25 Material: Carbon steel, galvanized Approved for: Cracked concrete 10x Shims, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), clear span: 1,800 mm, total height: 12,100 mm, load per truss pair (max.): 1,250 kg, shelf length: 9,540 mm, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 9,540 mm Number of bays per row of shelves: 05 pcs. 1,800 mm each Number of levels plus floor level: 09 pcs. Technical data on volume: Pallet spaces per bay: 20 pcs. Pallet spaces per rack row: 100 pcs. Total pallet spaces: 100 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 625 kg The scope of delivery includes: 06x pallet rack uprights, used Material color: sendzimir galvanized Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment grid: 50 | 50 mm Max. Max. bay load: 11,250 kg With buckling height: 1,000 mm (At least 5 bays / row of shelves) Incl. cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) 12,100 mm high 1,050 mm deep 06x upright protectors, used Material color: yellow Total height: approx. 750 mm Total width: approx. 99 mm Inner width: approx. 91 mm Total depth: approx. 60 mm Leg dimensions: approx. 75 x 75 mm Material thickness: approx. 3 | 4 mm 90x Pallet rack cross member, used Material color: RAL 5010 gentian blue IPE profile: 80 x 46 mm Beam type: TRV1-180-08-l Clear width: 1,800 mm Bracket: 4 HK (hooks) Max. load per truss pair 2,800 kg, with evenly distributed load Note: Due to the shelf constellation results in a reduced shelf load per pair of pair of beams of 1,250 kg 45x fitted shelving, second-hand Design: with notches Material color: hot-dip galvanized Total depth: approx. 1,060 mm (bearing bar direction) for upright depth: approx. 1,050 mm Internal depth: approx. 1,056 mm Total width: approx. 1,780 mm (crossbar direction) Ljdpfxstyyr Ss Ab Usrt Support bar spacing: 28|1.50 mm Crossbar support: approx. 58 mm Frame height: approx. 44 mm Mesh width: approx. 33 x 33 mm Weight per unit: approx. 33.310 kg Internal designation: GR-76 180x locking pin, used Material color: sendzimir galvanized For securing the side rails against unintentional lifting out 24x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, Year of construction: 2019, machine/vehicle number: T17157, functionality: fully functional, operating hours: 32,000 h, input voltage: 40,000 V, input current: 4,000 A, input frequency: 10,600 Hz, type of input current: three-phase, oil tank capacity: 300 l, total length: 42,400 mm, total width: 11,200 mm, total height: 5,100 mm, overall weight: 1,07,250 kg, year of last overhaul: 2026, Equipment: 4th hydraulic function, CE marking, documentation/manual, safety light barrier, FOR SALE – BYSTRONIC FL400 TUBE & PROFILE LASER CUTTING SYSTEM High-Performance Laser Cutting Machine for Tubes, Profiles and Structural Sections As part of a strategic investment and the acquisition of a new MAZAK FG-400 NEO tube laser system, we offer for sale our Bystronic FL400 laser cutting machine. The machine has been operating in a professional steel service center and remains in daily production use. It is offered for sale due to replacement with a new system. _____ General Information: Machine: Bystronic FL400 Year of Manufacture: 2019 Installation & First Commissioning: October 2019 Current Location: Mikołów, Poland Condition: Fully operational and currently in production _____ Technical Specifications: Laser Source • CO₂ Laser Source • FANUC Resonator • Laser Power: 4,000 W Loading & Unloading Capacities • Maximum Loading Length: 14,000 mm • Maximum Unloading Length: 12,500 mm • Maximum Material Weight: 140 kg/m Round Tubes • Minimum Diameter: 40 mm • Maximum Diameter: 406.4 mm Square Profiles • Minimum Dimension: 40 mm • Maximum Dimension: 300 mm Rectangular Profiles • Maximum Section: 300 × 200 mm Structural Sections Lredezqudpopfx Ab Uot • HEA / HEB: 100 – 280 mm • IPE: 80 – 360 mm • UPN / UPE: 40 – 240 mm • Angle Sections (L): 40 – 280 mm Maximum Material Thickness • Mild Steel: 20 mm • Stainless Steel: 8 mm • Aluminum: 6 mm Operating Status • Resonator Operating Hours: approximately 32,000 h • Machine remains in regular production operation _____ Additional Information The machine has been operated in a professional Steel Service Center specializing in the processing of steel tubes, profiles, and structural sections. The equipment is available for inspection under power at our facility in Poland. Photographs, sample production parts, and videos of the machine in operation are available upon request. _____ Documentation and Technical Details Detailed technical specifications, machine documentation, maintenance records, and additional operating information will be provided to qualified buyers upon request. Disassembly, packaging, and transport of the machine are the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Ljdpfexvbvvex Ab Uert Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Condition: excellent (used), Year of construction: 1993, control type: NC control, actuation type: hydraulic, number of rollers: 3, shaft diameter: 120 mm, overall weight: 6,400 kg, total length: 2,900 mm, total width: 2,130 mm, total height: 2,130 mm, Profile bending machine HAEUSLER - HPR 13 MACH-ID 9800 Make: HAEUSLER Type: HPR 13 Year: 1993 Set universal rolls Horizontal and Vertical positioning Hydraulic machine Scales for position side rolls Horizontal and vertical:H + V Lsdpfezxw E Ejx Ab Usrt Shaft Ø: 120mm Number of rolls: 3 Stroke X-Axis: 0 - 300mm Capacity flat: 130 x 20mm Capacity Tube: 114,3Ø x mm Capacity bar: 70 x 70mm Working speed: 0 - 5000mm/min. Length: 2900mm Width: 2130mm Height: 2130mm Weight: 6400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, clear span: 1,800 mm, total width: 1,050 mm, total height: 12,100 mm, load per truss pair (max.): 1,250 kg, shelf length: 11,430 mm, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 11,430 mm Number of bays per row of shelves: 06 pcs. 1,800 mm each Number of levels plus floor level: 09 pcs. Technical data on volume: Pallet spaces per bay: 20 pcs. Pallet spaces per rack row: 120 pcs. Total pallet spaces: 120 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 625 kg The scope of delivery includes: 07x pallet rack uprights, used Material color: sendzimir galvanized Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment grid: 50 | 50 mm Max. Max. bay load: 11,250 kg With buckling height: 1,000 mm (At least 5 bays / row of shelves) Incl. cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) 12,100 mm high 1,050 mm deep 07x upright protectors, used Material color: yellow Total height: approx. 750 mm Total width: approx. 99 mm Inner width: approx. 91 mm Total depth: approx. 60 mm Leg dimensions: approx. 75 x 75 mm Material thickness: approx. 3 | 4 mm 108x Pallet rack cross member, used Material color: RAL 5010 gentian blue IPE profile: 80 x 46 mm Beam type: TRV1-180-08-l Clear width: 1,800 mm Bracket: 4 HK (hooks) Max. load per truss pair 2,800 kg, with evenly distributed load Lrjdstznl Ispfx Ab Ujt Note: Due to the shelf constellation results in a reduced shelf load per pair of pair of beams of 1,250 kg 216x locking pin, used Material color: sendzimir galvanized To secure the longitudinal beams against unintentional lifting out 28x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 14x shim plate, used Version: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, Circular saw automation system Profilma 502, representative of the diverse "Profilma" series ideal for window and facade construction, automotive industry, machine and plant engineering, photovoltaics/solar, etc. • for aluminum and plastic profiles • fully automatic operation • Siemens S7 control with touch display, including piece counter • Error diagnosis including IXON router for VPN connection • Batch multiplier for the use of material bundles • Cycle time indication in seconds • for use with Ø 550 mm saw blades • Drive 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm • motorized saw feed, sawing cut from below • Cutting splitter extension on both sides of the saw blade • Material feed unit with ball screw spindle and servomotor Ljdpfx Abezlr Rce Ujrt • Feed length: 3 - 800 mm • Feed slide with adjustable support roller • Reversing mechanism up to a section length of max. 4.0 m • Automatic shutdown via limit switches at the end of the material • Remnant piece from 75 mm (depending on the profile) The basic machine is also available as a sawing, drilling, and threading automation system or as a sawing and punching automation system. They complete your orders quickly and efficiently with precision and high production volumes. Further circular saw automation systems are also available for larger profile dimensions or cost-intensive workpiece materials, and are part of the proven Pressta-Eisele standard range. Based on your processing requirements, we will be happy to advise you!

Condition: new, Machining center with 4 CNC-controlled axes for machining profiles made of aluminum, PVC, and steel Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine frame in a stable welded construction, stress-relieved by annealing, with hardened linear guides Protective cabin covering the entire machining length Pneumatically opening protective door Milling spindle: 3.8/4.6 kW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with ISO 30 tool holder with minimum quantity lubrication system for the tools with level monitoring Tool magazine: 5 positions, on the left side in the machine bed, for holding drilling, milling, threading tools, angle head, and disc cutters up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm automatic positioning via device on the Z-axis Workpiece positioning: one pneumatic reference stop each on the left and right on the A-axis Travel distances: X-axis 3500 mm Y-axis 370 mm Z-axis 348 mm A-axis ±90° Travel speeds: X-axis 70 m/min. Y-axis 30 m/min. Z-axis 30 m/min. A-axis 60°/sec Maximum working areas: X-axis 3270 mm Y-axis 250 mm at 0°, 116 mm at ±90° of the A-axis Z-axis: 170 mm at 0°, 200 mm at ±90° of the A-axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-sided machining by swiveling the A-axis 90°-0°-90° End face machining using disc cutters Operating modes: One profile bar over the entire machining length Two profile bars in divided machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screws, and guides, with level monitoring Operation: 18.5" TFT Mouse + keyboard Connection data: Electrical: 400 V/50 Hz (3-phase + N + PE), 16 A, Delivery without power cable Pneumatic: Pressure 6 - 8 bar Dimensions and weight: Length: 5800 mm Lsdowrcwpspfx Ab Uert Width: 1640 mm Height: 2000 mm Weight: 2000 kg incl.: Graphical programming software CM3D/CAD3D Barcode reader Teleservice with remote maintenance/diagnosis for 1 year after commissioning

Condition: used, clear span: 3,300 mm, total length: 17,100 mm, total height: 2,500 mm, load per truss pair (max.): 1,750 kg, Technical data for the pallet racking system: Racking system: Mecalux Technical data for the installation: Number of racking rows: 01 unit Ledpfoz A A Dljx Ab Uort Length per racking row: approx. 17,100 mm Number of bays per racking row: 05 units Number of levels including the base level: 02 units Technical data for the capacity: Pallet spaces per bay: 12 units Pallet spaces per row: 60 units Total pallet spaces: 60 units Based on: Load support: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: not specified Weight per pallet (max.): 435 kg Included in the scope of delivery: 06x Pallet racking uprights, used Material color: blue Upright profile dimensions: 100 x 69 x 2.0 mm Upright type: M-101 Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) 2,500 mm high 1,100 mm deep 20x Pallet racking beam, used Material color: RAL 2001 orange Beam type: TB-S120 Box profile: 120 x 50 mm Clear span: 3,300 mm Max. load per beam pair 1,750 kg with evenly distributed load 40x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal members against unintentional lifting 24x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Shimming plate, used Design: completely galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, clear span: 3,250 mm, total length: 39,539 mm, load per truss pair (max.): 2,550 kg, shelf height: 4,130 mm, Technical data for the pallet racking system: Racking system: Redirack Technical data for the installation: Number of racking rows: 1 Length per racking row: approx. 39,539 mm Number of bays per racking row: 12, each 3,205 mm Number of levels plus base level: 2 Included in the scope of supply: 13 x Pallet racking uprights, used Material color: light blue Frame profile: S Profile dimensions: C83x50x15x1.75 mm Including cross and diagonal braces Base plates The uprights are pre-assembled (welded framework) 4,130 mm high 1,100 mm deep 48 x Pallet racking beams, used Material color: yellow Box profile: 120 x 50 mm Clear span: 3,205 mm Maximum load per pair of beams: 2,550 kg, with evenly distributed load 96 x Safety pins, used Material color: Sendzimir galvanized For securing the longitudinal members against accidental lifting out 52 x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 26 x Shims, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground 1 x Load sign with information on bay and frame loads, manufacturer and batch number Lredpfxjzulgis Ab Ust Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for pick-up only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser source model: Max Photonics, laser power: 12,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, pipe diameter (max.): 550 mm, pipe length (max.): 12,000 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, ACME Tube and Profile Laser System – Precision Meets Performance The ACME tube and profile laser system represents maximum efficiency and flexibility for modern tube and profile machining. Equipped with four high-precision chucks, vertically positioned guides, and three movable clamping systems, it ensures stable and precise processing of a variety of workpieces. The system is available with multiple machining diameters (Ø 280 mm, 360 mm, 550 mm, 640 mm, and 800 mm), providing maximum adaptability to diverse production requirements. With selectable laser powers of 3 kW, 6 kW, 12 kW, and up to 20 kW as well as a processing length of up to 12 meters, this machine meets the highest industrial demands. High-quality components from renowned manufacturers guarantee durability and process reliability. Of course, the system is CE-compliant and meets all common safety standards. Efficient production workflows are ensured by semi-automatic loading and unloading, complemented by an integrated small parts conveyor belt. The innovative 45° laser head also enables precise cuts even for complex geometries. Ledpfx Ajy Ix E Ieb Uert ACME – Your solution for high-performance tube and profile laser processing at the highest level.

Condition: ready for operation (used), Year of construction: 1978, Immediately available, free of any bankruptcy claims: Universal profiling steel shear with hole punch, Mubea Type KBL 11 N Year of manufacture 1978 Pressing force 35 tons Reach 320 mm Punching round holes up to 33 mm in diameter Cutting square sections up to 30 x 30 mm Cutting flat steel 100 x 10 mm Cutting angle iron 130 x 13 mm Cutting T-profiles 60 x 8 mm Ljdpfx Abjz En Ize Uert Various hole punches Weight 2 tons Price: EUR 1,750.00 plus VAT, ex works.

Condition: new, Year of construction: 2026, Cabinet Sandblasting Machine KDP350TOP PLUS is an advanced technological device designed for precise abrasive blasting operations. Its construction has been developed for demanding users in the industrial, automotive, metalworking, and restoration sectors. Thanks to the top-opening chamber and side openings for long components, this model enables efficient cleaning and surface finishing of profiles, frames, and parts with unusual dimensions. It is an ideal sandblasting cabinet for wheels, metal components, and machine parts. Main advantages of the machine Large 330-liter working chamber – allows processing of medium and large components. Top-opening chamber – simplifies loading of elements with non-standard shapes or lengths. Side openings – provide convenient access and comfortable operation with longer parts. Dust-free operation system with two dust extraction connections and sealed gaskets. DC15 cyclone dust extractor included – effectively removes contaminants from the working chamber. Efficient operating pressure range of 4–8 bar and air consumption of 400–700 l/min – ensure effective blasting performance. Blasting gun with ceramic nozzles – high wear resistance and compatibility with various abrasive materials. Construction and technology The KDP350TOP PLUS cabinet sandblasting machine features a robust construction made of thick steel sheet, powder-coated for increased corrosion resistance. The upper door is equipped with telescopic cylinders, making it easier to open even when handling heavier components. The tightness of the cabinet is ensured by rubber perimeter seals, preventing dust and abrasive material from escaping outside the working area. The bottom abrasive discharge system allows quick and convenient replacement of blasting media. Precision and work efficiency Thanks to the wide operating pressure range and the ability to use various abrasive materials, the CORMAK KDP350TOP PLUS sandblasting cabinet provides uniform and precise cleaning of metal surfaces. The large viewing area of 580 × 270 mm and integrated workspace lighting enable accurate control of the blasting process, even when working with complex-shaped components. It is an excellent solution for workshops requiring repeatable and professional surface treatment results. Standard equipment DC15 cyclone dust extraction system Foot pedal for airflow control Working area lighting – 12V fluorescent lamp with 230V power supply 2 integrated, wear-resistant rubber working gloves 2 dust extraction connections: Ø63 mm and Ø90 mm Sandblasting gun with 8 replaceable ceramic nozzles 4 protective visor films Front door with rubber seals User manual in Polish Technical specifications – KDP350TOP PLUS cabinet sandblasting machine Lredpfx Abom Nccis Ust Parameter Specification Working capacity 330 L (0.33 m³) Operating pressure 4–8 bar Air consumption 400–700 l/min Air connection 1/4" quick connector Viewing window area 580 × 270 mm Side opening dimensions 200 × 180 mm Dust extraction connections Ø63 mm and Ø90 mm Internal cabinet dimensions (W × D × H min/max) 890 × 655 × 360/610 mm External dimensions 960 × 720 × 1500 mm Weight 88 kg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 148 kW (201.22 HP), filling opening width: 1,200 mm, filling opening length: 6,000 mm, number of blades: 150, rotational speed (max.): 80 rpm, rotor diameter: 390 mm, rotor width: 1,200 mm, Genox J1200 Series - Heavy Duty Horizontal Four Rotor Shredder suitable for processing long lengths of material i.e. pipe, profiles etc. Ljdpfoz Ai Tcsx Ab Uert 148kW combined shaft motor power (4 x 37kW) and an 18.5kW hydraulic power unit for the material feeder. The machine is equipped with heavy duty oversized gearboxes giving an 80rpm shaft speed. Four 1200mm wide x 390mm diameter rotors with 150 pcs of blades in total. The blades are 40mm concave reversible design manufactured from high quality, heat treated alloy steel. Material force feeding is regulated according to motor loading to achieve optimal throughput. These parameters can be easily configured on site to suit the materials being processed. Output size is controlled by a replaceable screen mounted beneath the lower rotor shaft, the size of which can be determined to suit the application. We also manufacture an 800mm version of this machine along with twin rotor and twin shaft (shear rotor) machines. Please contact us for more information and/or to discuss your requirements.

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser source model: Max Photonics, laser power: 12,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, pipe diameter (max.): 550 mm, pipe length (max.): 12,000 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Maximum performance for modern tube and profile processing The ACME tube and profile laser system was developed for the highest demands in industrial manufacturing and combines precision, productivity, and flexibility at the highest level. Thanks to its powerful design and intelligent automation, it is ideally suited for steel construction, mechanical engineering, plant engineering, metal processing, and demanding job-shop operations. The innovative machine concept with four high-precision chucks, three movable clamping systems, and vertically arranged guides ensures exceptionally stable workpiece guidance. This allows even long, heavy, or complex tube and profile geometries to be processed with the highest accuracy. Lsdpfjzb Irpsx Ab Uort The system is available in various versions for tube diameters of Ø 280 mm, Ø 360 mm, Ø 550 mm, Ø 640 mm, and Ø 800 mm and can be optimally adapted to individual production requirements. With available laser powers from 3 kW to 20 kW and processing lengths of up to 12 meters, the ACME tube laser system offers maximum performance reserves for a wide range of applications – from thin-walled profiles to heavy structural tubes. Your advantages at a glance ✔ Four high-precision chucks for maximum processing accuracy ✔ Three movable clamping systems for optimal workpiece guidance ✔ Vertical guide structure for maximum stability and dynamics ✔ Tube diameters up to Ø 800 mm available ✔ Processing lengths up to 12,000 mm ✔ Laser powers of 3 kW, 6 kW, 12 kW and up to 20 kW ✔ Innovative 45° laser head for weld preparation and complex contours ✔ Semi-automatic loading and unloading for efficient production processes ✔ Integrated small parts conveyor for automatic parts removal ✔ High process reliability thanks to high-quality brand-name components ✔ Full CE compliance according to European safety standards ✔ German-speaking service and professional online support Technical highlights Powerful tube processing Tube diameter: Ø 280 mm to Ø 800 mm Processing length: up to 12,000 mm Four-chuck technology Remainder optimization through intelligent clamping technology High dynamics with maximum positioning accuracy Advanced cutting technology Laser powers from 3 kW to 20 kW Precise contour and miter cuts 45° laser head for weld preparation Optimal cut quality for a wide range of materials Automation for maximum productivity Semi-automatic loading and unloading system Automatic small parts disposal via conveyor Reduced downtime Higher output with less personnel Typical application areas Steel and hall construction Mechanical and plant engineering Metal and tube processing Vehicle and commercial vehicle construction Agricultural technology Facade and railing construction Furniture and profile manufacturing Job-shop operations Quality and safety The ACME tube and profile laser system meets all relevant European safety requirements and is delivered CE-compliant. High-quality components from leading manufacturers ensure a long service life, high availability, and maximum investment security. ACME tube and profile laser system More performance. More precision. More possibilities. The intelligent solution for economical and highly productive tube and profile processing in modern manufacturing.

Condition: good (used), Year of construction: 1968, functionality: fully functional, Robust Altendorf F90 panel saw in a heavy-duty, solid design. The machine features a large sliding table with a cutting length of approximately 2,600 mm, a parallel fence, and a crosscut/miter fence. A cutting width of approximately 1,250 mm is available to the right of the saw blade. A classic, robust Altendorf machine for use in carpentry workshops and woodworking businesses. Technical specifications Manufacturer: Altendorf Machine type: Panel saw Year of manufacture: 1968 Cutting length: approx. 2,600 mm Cutting width to the right of the saw blade: approx. 1,250 mm Motor power: 5.5 hp / approx. 4.0 kW Lodpfjz D Uqtox Ab Uert Voltage: 380 V Equipment Large sliding table Parallel fence Crosscut/miter fence Saw blade guard Manual adjustments Heavy-duty, solid design The machine is in used condition, commensurate with its age. Transport is possible for an additional charge! Note The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: excellent (used), Number of spindles 3 St. Number of tools 8 St. Spindle diameter 50 mm Dimensions (L/W/H) 4250x1850x2300 mm Weinig Univar 6 CNC ----- Technical details summary (please ask for possibly more included equpment) ----- 1st profiling spindle: ----- > spindle rotation direction: clockwise and reverse for rip-off free outside profiling of sashes > position: vertical right > number of tools: 1 pcs. > length of spindle: 120 mm > number of revolutions: 6000 rpm > spindle diameter: 50 mm > tool diameter max.: 232 mm Lrodpfx Abeymf Ekj Uot > engine: 11 kW 2nd profiling spindle: ----- > position: vertical right > number of tools: variabel, CNC > length of spindle: 320 mm > spindle stroke vertical: variabel, CNC > number of revolutions: 6000 rpm > spindle diameter: 50 mm > tool diameter max.: 232 mm > engine: 11 kW 3rd profiling spindle: ----- > position: vertical right > length of spindle: 160 mm > number of revolutions: 5850 rpm > spindle diameter: 40 mm > tool diameter max.: 210 mm > engine: 3 kW More features: ----- > possible to work online: > monitor control: > Equipment for profiling small sashes: min. 500 mm > Control: PC-Nexus If the technical characteristics of this machines donnot fit with your requirements, please get in contact with us. Our longtime experienced team is looking forward to support you in technical adaptions or in finding a suitable machine for you! ----- Technical details according to manufacturer - without guarantee!