Used Leuze Rk311 for sale (68)

Condition: used, Year of construction: 2014, functionality: fully functional, -KOM 3091- Offered here are Leuze photoelectric sensors. The photoelectric sensors are in good condition. They were previously used in a set of two as safety sensors. A total of six Leuze photoelectric sensors of this type are available. Rodpfewl U Sxex Akweu

Condition: good (used), functionality: fully functional, -KOM 3094- Rodpjwmabbefx Akweu Offered here is a used Leuze MLD M light barrier. A total of five other light barriers of the same type are available.

Condition: new, Year of construction: 2025, pressing force: 80 t, table width: 600 mm, table length: 800 mm, table height: 850 mm, drop-through hole in table: 190 mm, ram adjustment: 85 mm, stroke adjustment: 100 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel Rsdpfevxhb Uox Akwju o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 80 Tons Table-Ram Distance 400 Mm Distance Between Walls 880 Mm Ram Adjustment 85 Mm Press Approximate Width 1150 Mm Press Approximate Depth 1500 Mm Press Approximate Height 2500 Mm Table Hole Diameter 190 Mm Table Size 600 / 800 Mm Mold Clamping Housing Diameter 40 Mm Ram Size 245 / 410 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 100 Mm Stroke Number/Minute 50 Units/min. Engine Power 7.5 KW Engine Speed 1450 RPM Approximate Weight 6,500 Kg

Condition: new, Year of construction: 2025, pressing force: 150 t, table width: 720 mm, table length: 1,000 mm, drop-through hole in table: 220 mm, ram adjustment: 120 mm, stroke adjustment: 125 mm, Equipment: safety light barrier, PLACE OF PRODUCTION: Türkiye WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: IMMEDIATELY FROM STOCK GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Body and welded parts will be stress relieved by vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 150 Tons Table-Ram Distance 500 Mm Distance Between Walls 1080 Mm Ram Adjustment 120 Mm Press Approximate Width 1400 Mm Press Approximate Depth 1900 Mm Press Approximate Height 3000 Mm Table Hole Diameter 220 Mm Table Size 720 / 1000 Mm Mold Clamping Housing Diameter 55 Mm Ram Size 450 / 800 Mm Table Dimensions from Floor 900 Mm Stroke Adjustment 10 / 125 Mm Stroke Number/Minute 50 Units/min. Motor Power 15 + 0.75 KW Rodovyrywspfx Akweu Motor Speed 1450 RPM Approximate Weight 12,000 Kg

Condition: new, Year of construction: 2025, pressing force: 200 t, stroke length: 200 mm, table width: 1,000 mm, table length: 2,000 mm, warranty duration: 24 months, Equipment: safety light barrier, Eccentric presses are mechanical press types operated by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. H-type (straight-side) eccentric presses provide high stability and process safety for large table and heavy die applications, thanks to their rigid frame construction. CRONOSSTECH CEHP 200 – H-Type Eccentric Press 200 Ton is designed for stable operation in high-volume production, focusing on die protection and operator safety. Featuring a monoblock frame, 8-guided ram system, hydraulic overload safety, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 1000×2000 mm large table - Die/equipment protection with hydraulic overload safety - Controlled and user-friendly operation via PLC + touchscreen - High operator safety with light curtain protection (LEUZE) - Fast production change-over with 99 die memory settings Areas of Application - Punching/cutting/forming applications requiring a large table - Serial production with automated feeding lines - Heavy-duty dies and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch–brake • Additional bolted T-slotted plate • 8-guided ram • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse motion • Hydraulic overload safety device • Motorized ram adjustment mechanism • Light curtain protection • Enclosed oil reservoir with gear set • Double-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material discharge systems • Sliding safety door at table front • Dies with custom specifications ✅ TECHNICAL SPECIFICATIONS (CEHP 200 – 200 TON) Capacity: 200 Ton (CEHP 200) Lower table usable area: 1000×2000 mm Upper table usable area: 1000×2000 mm Stroke length (fixed): 200 mm Nominal material thickness: 7 mm Strokes per minute (SPM): 25–45 Max. shut height: 600 mm Min. shut height: 480 mm Side window dimensions: 600×600 mm Adjustment (ram adjustment): 120 mm Number of connecting rods: 2 pcs Number of eccentric shafts (cranks): 2 pcs Safety device: Hydraulic Redpfxsx N Ruqj Akwju Switchgear brands: Siemens – Schneider Lubrication system: Automatic Display / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operation mode: 4-position Die memory: 99 settings Mounting type: Floor standing Body type: Monoblock Motor power: 22 kW (IE3) Motor speed (RPM): 1450 Approx. machine dimensions (L×W×D): 4600×3000×2000 mm Approximate weight: 28,000 kg Note: Please let us know if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and aftersales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 125 t, table width: 700 mm, table length: 900 mm, drop-through hole in table: 210 mm, ram adjustment: 100 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA Rjdpfx Akevxhqvjwju o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 125 Tons Table-Ram Distance 500 Mm Distance Between Walls 1000 Mm Ram Adjustment 100 Mm Press Approximate Width 1250 Mm Press Approximate Depth 1750 Mm Press Approximate Height 2850 Mm Table Hole Diameter 210 Mm Table Size 700 / 900 Mm Mold Clamping Housing Diameter 55 Mm Ram Size 340 / 550 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 125 Mm Stroke Number/Minute 50 Units/min. Motor Power 11 KW Motor Speed 1450 RPM Approximate Weight 8,500 Kg

Condition: new, Year of construction: 2025, pressing force: 300 t, table width: 900 mm, table length: 1,200 mm, drop-through hole in table: 260 mm, ram adjustment: 150 mm, stroke adjustment: 200 mm, Equipment: safety light barrier, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR Rjdpfxjvyr Eas Akwsu o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 300 Tons Table-Ram Distance 530 Mm Distance Between Walls 1280 Mm Ram Adjustment 150 Mm Press Approximate Width 1700 Mm Press Approximate Depth 2200 Mm Press Approximate Height 3500 Mm Table Hole Diameter 260 Mm Table Size 900 / 1200 Mm Mold Clamping Housing Diameter 60 Mm Ram Size 470 / 900 Mm Table Dimensions from Floor 1000 Mm Stroke Adjustment 20 / 200 Mm Stroke Number/Minute 38 Pcs/min. Engine Power 30 + 2.2 KW Engine Speed 1450 RPM Approximate Weight 18,000 Kg

Condition: new, Year of construction: 2025, pressing force: 100 t, table width: 700 mm, table length: 880 mm, table height: 850 mm, drop-through hole in table: 200 mm, ram adjustment: 85 mm, stroke adjustment: 110 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL Rsdpfx Akevxhprowsu o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 100 Tons Table-Ram Distance 450 Mm Distance Between Walls 960 Mm Ram Adjustment 85 Mm Press Approximate Width 1230 Mm Press Approximate Depth 1650 Mm Press Approximate Height 2500 Mm Table Hole Diameter 200 Mm Table Size 700 / 880 Mm Mold Clamping Housing Diameter 50 Mm Ram Size 245 / 410 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 110 Mm Stroke Number/Minute 50 Units/min. Engine Power 11 KW Engine Speed 1450 RPM Approximate Weight 7,500 Kg

Condition: new, Year of construction: 2025, pressing force: 200 t, table width: 800 mm, table length: 1,070 mm, drop-through hole in table: 240 mm, ram adjustment: 130 mm, stroke adjustment: 160 mm, Equipment: safety light barrier, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 200 Tons Table-Ram Distance 500 Mm Distance Between Walls 1150 Mm Ram Adjustment 130 Mm Press Approximate Width 1500 Mm Press Approximate Depth 2000 Mm Press Approximate Height 3200 Mm Table Hole Diameter 240 Mm Table Size 800 / 1070 Mm Mold Clamping Housing Diameter 60 Mm Ram Size 450 / 800 Mm Table Dimensions from Floor 950 Mm Stroke Adjustment 20 / 160 Mm Stroke Number/Minute 40 Units/min. Engine Power 18.5 + 0.75 KW Engine Speed 1450 RPM Redovyr Diopfx Akwsu Approximate Weight 14,000 Kg

Condition: new, Year of construction: 2025, pressing force: 250 t, table width: 850 mm, table length: 1,150 mm, drop-through hole in table: 240 mm, ram adjustment: 150 mm, stroke adjustment: 160 mm, Equipment: safety light barrier, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 250 Tons Table-Ram Distance 520 Mm Distance Between Walls 1230 Mm Ram Adjustment 150 Mm Press Approximate Width 1600 Mm Press Approximate Depth 2100 Mm Press Approximate Height 3400 Mm Table Hole Diameter 240 Mm Rsdpevyr D Ajfx Akwou Table Size 850 / 1150 Mm Mold Clamping Housing Diameter 60 Mm Ram Size 470 / 900 Mm Table Dimensions from Floor 950 Mm Stroke Adjustment 20 / 160 Mm Stroke Number/Minute 40 Units/min. Engine Power 22 + 2.2 KW Engine Speed 1450 RPM Approximate Weight 16,000 Kg

Condition: new, Year of construction: 2025, pressing force: 150 t, stroke length: 200 mm, table width: 900 mm, table length: 1,800 mm, warranty duration: 24 months, Equipment: safety light barrier, The eccentric press is a type of mechanical press, powered by a force generated via an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses, thanks to their rigid frames, provide high stability and process security, especially in applications requiring large tables and heavy dies. The CRONOSSTECH H-Type Eccentric Press 150 Ton is designed with a focus on stable operation in high-volume production, die protection, and operator safety. The monoblock frame, 8-way guided slide system, hydraulic overload safety, and automatic lubrication infrastructure ensure reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with large table dimensions for oversized dies - Die/equipment protection with hydraulic overload safety - Precise guidance via 8-way slide + counterbalance piston - Controlled, user-friendly operation via PLC and touch screen - High operator safety with light curtain protection system Areas of Application - Punching/cutting/forming processes requiring large tables - Serial production with automatic feeding lines - Heavy die and high tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch-brake • Additional T-slotted bolster plate • 8-way guided slide • Adjustable stroke on single connecting rod • Counterbalance piston on slide • Full automatic fine lubrication system • PLC control system • Piano-type control panel • Touch LCD screen • Motor reverse function • Hydraulic overload safety • Motorized slide adjustment mechanism • Light curtain protection system Redpfx Akjx N Ru Dewsu • Enclosed oil gear unit • Dual-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety cover in front of the table • Dies custom-built to specifications ✅ TECHNICAL SPECIFICATIONS (H-TYPE – 150 TON) Capacity: 150 Ton Usable area of lower table: 900×1800 mm Usable area of upper table: 900×1800 mm Stroke: 200 mm (fixed) Nominal material thickness: 7 mm Speed (SPM): 60 Max. closed die height: 500 mm Min. closed die height: 380 mm Adjustment (slide): 120 mm Number of connecting rods: 2 Number of eccentric (crank) shafts: 2 Safety system: Hydraulic Electrical components (control panel): Siemens – Schneider Lubrication system: Automatic Screen / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operation mode: 4-position Die memory: 99 sets Mounting: Floor standing Frame type: Monoblock Motor power: 22 kW Motor speed (RPM): 1450 Approximate machine dimensions (L×W×D): 4500×3000×2000 mm Approximate weight: 20 Ton Note: Please contact us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 600 mm, total length: 1,200 mm, total height: 2,300 mm, overall weight: 150 kg, type of input current: three-phase, input voltage: 400 V, working range: 400 mm, product height (max.): 30 mm, warranty duration: 12 months, controller model: SPS-Steuerung Siemens Simatic HMI, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, positioning accuracy: 1 mm, Equipment: CE marking, documentation/manual, lighting, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary Rsdpfxoyycqxs Akwju • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Rsdpfx Akoyupulowou Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: new, pressing force: 280 t, 280 t servo double-column heated press with heating plates We can offer you this press at a particularly attractive price, as the machine is already under construction and the original customer has cancelled an order for two identical machines. This gives you the opportunity to purchase a high-quality servo-hydraulic double-column press with heating plates under favorable conditions and with comparatively short lead times. The photos shown depict similar, previously built machines from the factory and are for reference purposes only. Technical data & information: ==== General information Press force: 280 t Design: servo double-column heated press Main cylinder: 1 Auxiliary cylinders: 2 Guidance: 4-column guides Clear width between uprights: 1,250 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from floor incl. damping plates and heating plate: 900 mm Overall height approx.: 3,500 mm Width incl. control cabinet approx.: 2,200 mm Depth approx.: 1,200 mm Weight approx.: 13,000 kg ==== Table & Ram Fixed lower table with T-slots: 1,250 × 800 mm Ram with T-slots: 700 × 800 mm Heating plate: 600 × 600 × 80 mm ==== Speeds Approach speed: 100 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec ==== Hydraulics & Drive/Electrics Hydraulic power unit: Duplomatic Hydraulic pump: Rexroth / Baumüller / Servo Pump capacity: 72 l/min Motor power: 10 kW Servo hydraulics: included Control: Siemens S7-1200 with Siemens MTP 1000 touchscreen display Programming: up to 50 programs Travel measurement: encoder Rjdpfx Aeyynalokwju Pressure measurement: data recording ==== Equipment Digital control for stroke, pressure, speed, and changeover positions Passive pressure-holding function for up to 15 minutes Electrically heated plates up to 250 °C Heating capacity: 24 kW Temperature monitoring and heating element control via monitor Piece counter Alarm management Downward accuracy: 0.1 mm Stroke limitation via Leuze measuring rod and monitor Two-hand operation Ram return via operating button Light curtain protection front and rear up to 2,500 mm height CE certificate and user manual included Control cabinet with Siemens components Safety systems by Sick / Pilz / Keyence / Datalogic ==== Additional included features 40 mm thick base plate with chamfered ramp 4 vibration damping plates Energy-saving servo hydraulics Applications: Heated presses, compression molding presses, presses with temperature-controlled processes, plastics processing, composite materials, technical molded parts, lamination processes, industrial special applications Hydraulic press, servo-hydraulic press, servo press, double-column press, heated press, servo double-column press, compression molding press, press with heating plates, industrial machine, special machine, tool adjustment press, tryout press, tool try out press.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 300 t, table length: 1,800 mm, table width: 1,100 mm, Vulcanizing Press – Manufacturer: Durendus – 300 t Heating Press – Table 1,800 × 1,100 mm For sale is a high-performance hydraulic vulcanizing press from the manufacturer Durendus with a press force of 300 t. The machine features large-format heating plates measuring 1,800 × 1,100 mm, a clear column spacing of 2,100 mm, and a stroke of 600 mm, making it particularly suitable for large-surface vulcanizing, laminating, and thermal pressing processes in industrial applications. Rjdpex Ap Itofx Akwju ==== Technical Data & Information: Vulcanizing Press Durendus – 300 t Heating Press ==== General Details - Manufacturer: Durendus - Model: Vulcanizing Press - Design: Heating Press / Vulcanizing Press - Press force: 300 t - Machine weight: approx. 22,000 kg - Dimensions (W × D × H): approx. 3,800 × 1,870 × 3,600 mm ==== Working Area - Clear width between columns: 2,100 mm - Max. distance between heating plates: 800 mm - Stroke: 600 mm - Table height over floor (incl. heating plates): 800 mm ==== Table and Ram - Heating plate size: 1,800 × 1,100 mm - Table (lower), with T-slots: 2,100 × 1,100 mm - Ram with T-slots: 1,900 × 1,100 mm ==== Speeds - Approach speed: 150 mm/s - Working speed: 15 mm/s - Return speed: 150 mm/s ==== Hydraulics (Version 1) - Hydraulic unit: Bosch Rexroth - Hydraulic pump: 105 l/min - Motor power: 22 kW ==== Hydraulics (Version 2) - Hydraulic unit: Duplomatic / Daikin Hybrid-Servo - Hydraulic pump: 130 l/min - Motor power: 15 kW ==== Control and Operation - Two-hand operation - Ram return via control button - Travel limit via Leuze measuring system and monitor ==== Features - CE certificate - User manual included ===== Vulcanization, rubber processing, plastics processing, lamination processes, large-format molding presses, thermal pressing procedures, heavy-duty applications Vulcanizing press, heating press, hydraulic press, large-format press, laminating press, molding press, thermal press, heavy-duty press, try-out press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with Brazilian national safety standard NR 12, which is based on these directives. Our core strengths are special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. We use components from leading European manufacturers for the hydraulic systems in our presses.

Condition: new, pressing force: 1,100 t, 1100 t Servo Double-Column Heated Press with Heating Plates We can offer you this press at a particularly attractive price, as the machine is already under construction and the original customer has cancelled their order for two identical units. This provides an opportunity to purchase a high-quality servo-hydraulic double-column press with heating plates under attractive terms and with comparatively short delivery times. The photos shown display similar, already completed machines from the factory and are for reference purposes only. Technical Data & Information: ==== General Specifications Rodpfx Asyyna Sokwsu Press force: 1,100 t Design: Servo Double-Column Heated Press Main cylinder: 1 Auxiliary cylinders: 2 Guidance: 4-column guides (Ø 150 mm) Clear opening between columns: 1,600 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from floor incl. shock absorber and heating plate: 1,000 mm Overall height approx.: 4,600 mm Width incl. control cabinet approx.: 3,250 mm Depth approx.: 1,700 mm Weight approx.: 41,000 kg ==== Table & Ram Lower fixed table with T-slots: 1,600 × 1,100 mm Ram with T-slots: 1,500 × 1,100 mm Heating plate: 1,100 × 1,100 × 140 mm ==== Speeds Approach speed: 100 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec ==== Hydraulics & Drive/Electrics Hydraulic unit: Duplomatic Hydraulic pump: Bosch Rexroth / Baumüller / Servo Pump capacity: 240 l/min Motor power: 32 kW Servo hydraulics: included Control system: Siemens S7-1200 with Siemens MTP 1000 touchscreen display Programming: up to 50 programs Position measurement: encoder Pressure measurement: digital data acquisition ==== Equipment Digital control for stroke, pressure, speed, and changeover positions Passive pressure holding up to 15 minutes Electrically heated plates up to 250 °C Heating power: 60 kW Temperature monitoring and heating rod monitoring via monitor Piece counter Alarm management Downstroke accuracy: 0.1 mm Travel limitation via Leuze measurement rod and monitor Two-hand operation Ram return via control button Light curtain safety front and rear up to 1,900 mm height CE certificate and user manual included Control cabinet with Siemens components Safety systems from Sick / Pilz / Keyence / Datalogic ==== Additional Included Features 40 mm thick base plate with chamfered ramp 4 vibration damping pads Energy-saving servo hydraulics Applications: Heated presses, compression moulding presses, presses with temperature-controlled processes, plastics processing, composite materials, technical moulded parts, lamination processes, industrial large-scale production, special purpose machinery manufacturing Hydraulic press, servo-hydraulic press, servo press, double-column press, heated press, servo double-column press, compression moulding press, press with heating plates, industrial machinery, special-purpose machine, tool trial press, tryout press, tool try out press

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, controller model: SPS-Steuerung, working width: 300 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, number of drawers: 1, positioning accuracy: 1 mm, working height: 30 mm, working length: 400 mm, working range: 400 mm, Equipment: CE marking, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack Redeyx Hgbopfx Akwsu • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: new, Year of construction: 2022, functionality: fully functional, total width: 600 mm, total length: 1,200 mm, total height: 2,300 mm, overall weight: 150 kg, type of input current: three-phase, input voltage: 400 V, working range: 400 mm, product height (max.): 30 mm, controller model: SPS-Steuerung Siemens Simatic HMI, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, positioning accuracy: 1 mm, Equipment: CE marking, documentation/manual, lighting, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) Redpfx Aksyx Hrkoweu • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 8,000 mm, workpiece height (max.): 30 mm, workpiece weight (max.): 150 kg, TECHNICAL DETAILS Maximum plate length: 2,500 mm Maximum plate width: 8,000 mm Maximum plate thickness: 30 mm Maximum weight: 150 kg MACHINE DETAILS Tilting station transfer height: 680 mm Belt conveyor with lifting function for discharge: 40 mm Rsdpfx Akjy Nbcxowju Belt conveyor with lifting function for transfer to roller conveyor: 265 mm Roller conveyor and belt conveyor transfer height: 920 mm Conveying direction Lengthwise on roller conveyors Crosswise on toothed belt conveyors Electrical Data Operating voltage: 400 V +N +PE - 50 Hz Control voltage: 24 V DC Brake voltage: 230 V AC Drive Technology Manufacturer: SEW Protection class: IP54 Quick-connect plug and hybrid cable on SEW fieldbus modules EQUIPMENT Sensors: Leuze Metalwork

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 10.0 mm/sec return speed 135 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm oil volume 200 ltr. voltage 400 Volt total power requirement 15.0 kW weight 9450 kg range L-W-H 4250 x 2150 x 2800 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen * 2D graphical programming * 15" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine Rjdjxaax Ropfx Akwou - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "Sliding-System", with T-slot and cam - 1x double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: new, pressure: 100 toStroke/min: 50table clamping area: 600 x 780tappet measurements: 240 x 400Stroke adjustment: 20 - 130Tappet adjustment: 100daylight: 400PK100 Eccentric Press Capacity: 100 tons Strokes per minute: 50 spm (adjustable) Table size: 780 x 600 mm Ram size: 400 x 400 mm Stroke adjustment: 20 – 130 mm Ram adjustment: 100 mm Installation height: 400 mm Roder I H Dgjpfx Akwsu Accessories: Control system: Siemens S7-1200 Display: Siemens 9’’ screen Stroke path adjustment Min & max stroke rate adjustment Automatic central lubrication Safety PLC: PILZ or SIEMENS Dual-channel safety control cabinet Light curtain: SICK, PILZ, or LEUZE, Cat 4 CE-compliant system 2 pcs. shear plates Bottom support plate for transport Under-grip protection Pneumatic clutch & brake combination

Condition: new, pressure: 100 toStroke/min: 50table clamping area: 900 x 700tappet measurements: 500 x 350Stroke adjustment: 20 - 130Tappet adjustment: 100daylight: 400EEP-PK100 ECCENTRIC PRESS- Pneumatic coupling & brake combination - Hydraulic overload protection ( ¤2,800 due to the large working area, it is recommended )  - Capacity: 100 tons   - stroke/min. : 50 spm  - Table: 900 x 700 mm  - Pestle: 500 x 350 mm  - Stroke adjustment: 20 – 130 mm  - Plunger adjustment: 100 mm  - Installation height: 400 mm Accesories : - Stroke adjustment  - Min/stroke setting  - Automatic central lubrication  - Security PLC: PILZ or SIEMENS  Redpfov Hin Eex Akwju - Two-channel fuse control cabinet  - Light barrier: SICK, PILZ or LEUZE,  - Cat 4. CE. system  - 2 pieces. Fracture plates  - Bottom support plate for transport  - Underreach protection

Condition: used, Year of construction: 2023, 2023 Cloos Robot Welding Cell With QRC-300 Robot & Qineo Next 452 Premium MIG/MAG Welding Source - With Leuze Electronic MLS Safety Light Curtains, Welding Torch Cleaner & Pendant Controls. Dual Rotary Transfer Table dimension 650 x 450mm. Cloos QRC-300 Robot- Swivelling Range Axis 1 -170 ° / +170 °, Axis 2 -90 ° / +125 °, Axis 3 -220 ° / +70 °, Axis 4 -170 ° / +170 °, Axis 5 -135 ° / -135 °, Axis 6 -300 ° / +300 °, Swivelling Speed Axis 1 200 °/sec, Axis 2 200 °/sec. Axis 3 230 °/sec, Axis 4 490 °/sec, Axis 5 540 °/sec, Axis 6 520 °/sec. Working Area Ø3,000mm. Range 2,000mm. Pay Load 8kg. Repeatability +/-0.1mm. Floor Space 400 x 400mm. Weight 110kg. S/No. 0881590000-20040 (2023). Qineo Next 452 Premium- Welding Current 25A/15V-450A/36.5V. Welding Current At 60% Duty Cycle* 450A/36.5V. Welding Current At 100% Duty Cycle* 350A/31.5V. Open Circuit Voltage 80V. Mains Voltage 380V-480V/3 Phases. Connection Cable 4 x 6mm2. Mains Fuse Slow-Acting 32 A. Type Of Protection IP. Insulation Class F. Type Of Cooling F. Dimensions L720 x W340 x H500mm. Weight Of Power Unit 63kg. Weight Of Cooling Module 28kg. S/No. Qinx 1963 (2023). Wire Drive Units QINEO NexT-Wire Feed 30m/min, Wire Ø0.8-2mm. Overall Dimensions W350 x D270 x H230mm. Weight 10.2kg. Rjdpfx Aeyx Hzxjkwou

Condition: as good as new (ex-display), Year of construction: 2024, pressure 60.0 t Redsxabt Ajpfx Akwou chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 12.0 mm/min return speed 190 mm/sec work stroke 275 mm dayligth 550 mm oil volume 300 ltr. table height 900 mm table width 90.0 mm voltage 400 Volt total power requirement 15.0 kW weight 9800 kg range L-W-H 4150 x 2150 x 2800 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R Rodpfx Ajxabfxskwsu - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes