Hydr. pressbrake

ERMAK POWER BEND PRO 37.220

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 320 t, working range: 4,100 mm, Like Baykal 320ton x 4metre Cnc Pressbrake For sale Make: Baykal Capacity: 4metre x 320ton Axis: R and X axis on the back gauge - 2 axis back gauge Year: 2022 Control: Esa S660W Complete with tooling: Multi V lower as well as segmented tooling Technical information: Ijdpfjvgc R Hex Adwoht Up to 12mm thickness at 4 meters / Up to 15mm thickness at 3 meters Bending power: 320 tonne 5 axis Bending length (over tooling) 4100mm Bending length (between frames) 3550mm automatic under crowning and laser angle measurement system with live feedback to CNC control for the most accurate folding process

Year of construction: 2009, condition: reconditioned (used), 100t turning roll, rollerbed Iedpfx Ademk Iktswsht workpiece diameter 500mm-7.500mm speed 130-1.250mm/min availible for renting

Condition: new, functionality: fully functional, Year of construction: 2025, Available in stock Capacity – 500 l. Diesel engine. Self-Propelled. Diesel Burner. Engine fuel tank – 50 l. Oil tank – 30 l. Thermal oil heater – 80 l. Electrically heated hose – 6 m. Iedpfx Asd Swd Uedweht Heating the mastic through the thermal oil (thermal oil jacket).

Condition: used, operating hours: 2,572 h, The Tennant M30 increases productivity by delivering exceptional sweeping and scrubbing performance and also improves health and safety. Easy to operate and maintain, it quickly improves the image of your facility by cleaning in a single motion (wet or dry). It also cleans three times longer on one water tank using Tennant's innovative ec-H20 technology that uses up to 70% less water. This Tennant M30 comes standard with: - Complete service, - New battery pack, - Free on-site delivery, - New wear parts and rubbers, - Service and overhaul, - Explanation and instruction, - Cleaning agents, - Brushes and accessories tailored to your floor. Other specifications: - Type: Sweeper-Scrubber, - Condition: Occasion, - Brand: Tennant, - Model: M30, - Sit up or walk behind: Sit down, - Theoretical capacity: 15,860 m²/h, - Side brush diameter: 53 cm, - Scrubbing width: 157 cm, - Mopping width: 150 cm, - Number of brushes (scrub): 2, - Brush type: Cylindrical, - Scrub brush diameter: 30.5 x 122 cm, - Brush pressure (scrub): 193 kg, - Dumpster capacity: 198 liters, - Clean water tank capacity: 284 liters, - Dirty water tank capacity: 360 liters, - Power source: Battery 36V, - Dirt tank emptying: High discharge system, - Maximum dumping height: 152 cm, - Filter area: 7.3 m², - Filter type: Panel filter, - Maximum speed: 13 km/h, - Maximum slope angle: 10%, - Drive: rear wheel, - Filter shaker: Electric, Iodenyiv Nopfx Adwjht - Weight (excl. batteries): 1,815 kg, - Weight (incl. batteries): 2,449 kg, - Dimensions (LxWxH): 274 x 162 x 147 cm, - Stock: In stock, - Working hours: 2,572 hours, In addition, you can contact Metech for all machine maintenance and reorder cleaning supplies. In addition to this used Tennant M30, we also have new sweeper-scrubbers and used machines available. View our sweeper-scrubbers for more information. Would you like to know more about this Tennant M30? Contact us, we are pleased to tell you all about it.

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0-90 Grad table turning speeds 0,25 - 4 U/min Torque max. 360 N/m centre of gravity max. 150 mm Ihodpfx Aegvkgtedwst total power requirement 0,4 kW The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: refurbished (used), 50,000l steel tank for fire or drinking water with a seal of approval. The tanks are sandblasted and painted with anti-corrosive epoxy resin or PZH-approved paint. Iedpfx Adjfngf Ijweht Dim. 2.80x 8.5m

Condition: refurbished (used), functionality: fully functional, Underground storage tank for non-drinking water with the capacity of 30000 litre. It can also be used to store water for fire department. The accesories can be purchased separately. We can also offer transport, please ask. Iedpfxsi Ary Se Adwsht

Year of construction: 2012, condition: as good as new (ex-display), Round 50 with MIG/MAG preparation consisting of: - Rotary tilting table Turn50 - three-jaw chuck 200mm with centering fixture - Attachment kit quill with manual operation - welding cable 50mm² Ihedpfx Adeiby Najwot - Attachment set circular weld 1 (cable set+initiator) - Base frame with mounting kit for torch stand and integrated magnetic stop - Torch stand Fix50/50 1000/500 F/H Stand tube 1000mm extension arm: - Tube spindle unit 500mm - - Burner fine positioning 3x50mm with tube connection piece - Ball joint KG1 Universal torch clamp with indexing - 37/38mm for MIG/MAG automatic welding torches - Control 12 Automation control with integrated control panel - LorchNet connection cable 1m 2 x M12 Connector

Condition: new, overall weight: 32,000 kg, axle configuration: 2 axles, loading space length: 12,300 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, Wiese 2-axle stepped saddle plateau with Fassi F545 crane Mega Lowliner Chassis Welded construction with cross beams made entirely of high-quality steel Neck height = approx. 220 mm including coupling plate with all necessary chassis reinforcements and cross connections Axles 2 BPW axles with a load capacity of 10,000 kg each with 17.5" drum brakes ABS: 1 axle sensing Wheelbase: 1,810 mm Tires 8-wheel type 235/75 R17.5 Rims Aluminum rims, 10-hole, centered, ET= 122 mm Lighting system 24V lighting system in accordance with EU directives 76/756/EEC ff. with: 2x2 three-chamber LED lights 1x reversing light LED 1x LED fog light LED side marker lights Lane departure lights License plate illumination 2x 7-pin sockets + 1x 15-pin socket connected according to EU standard Floor Galvanized grating covering on drop deck Steel tear plate in the axle area Load securing Outer frame with lashing hole profile D030 mm in the slope 2x12 lashing points 8,000 daN in the outer frame 3x combi row of stanchion pockets for 80x80 mm stanchions in the drop deck Accessories 2x wheel chocks with holder Spare wheel holder Winch 2x storage box with drawer (chain storage) Surface protection Steel construction: blasted and primed Coloring Chassis/frame/floor frame: single color in RAL 3020 (traffic red) Axle hubs: single-colored in RAL 3020 (traffic red) Axles: KTL-coated black Rims: Aluminum Durabright With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional support beam 360 ° working range approx. 90 % to the front For further information please do not hesitate to contact us Ihsdpfx Adon Hrtgowjt

Condition: ready for operation (used), Year of construction: 2019, pressure 135 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 10.0 mm/sec return speed 135 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm Number of working hours ca. 40.0 h control DA 58 T oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 8186 kg range L-W-H 4250 x 2150 x 2800 mm machine has rarely been in use with only approx. 40 operating hours (!!) current new price approx. 80.000 Euro special price on request ----- POWER BEND PRO electro-hydraulic press brake with : * increased installation height * increased cylinder stroke * increased throat depth ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-58T" graphics/touchscreen * 2D graphic programming * 15" color screen TFT with high resolution * Bending sequence calculation * Product programming and display in real size * USB interface - CNC controlled axis : Y1 - Y2 - X - R Isdjx Haxtopfx Adwoht - CNC electro-motorized back gauge * Backgauge with R-axis, on ball screws * Traverse paths : X = 800 mm // R = 250 mm * Traversing speed X axis ... 230 mm/s * with 2x manually adjustable stop fingers - ROLLERI roe deer foot top tool "PS 135.85-R08", system "A" * including quick-change clamp * Including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device : Light barrier - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with SLIDING system (HIWIN plain bearings) - 1x free-moving double foot control - CE mark / declaration of conformity - Operating instructions