Used Lsam Extruder for sale (393)

Year of construction: 2016, condition: good (used), functionality: fully functional, Farmet FE500 extruder for soybean, other oilseed, grain, pet food etc, in good condition, complete with command box. Psdpfx Asxfc Uxoggspw Motor 55kw Capacity 500-750kg/h

Year of construction: 1989, condition: good (used), Werner ZSK 58/32 D twin-screw extruder Ppjdozktrropfx Aggjw Year: 1989 110 kW motor

Year of construction: 1998, operating hours: 1,776 h, condition: used, functionality: fully functional, machine/vehicle number: 37, IDE--o/c 182836 - DC-drive 8,5 kW / screw Speed max. 50 rpm Ppsdpfxszmurrs Aggjw - 1-part cylinder, smooth - 1x flange heating zone - 2x die heating zones - die connection IDE M70x2

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: Podpfxoznz Ezo Aggopw • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We are Penope Oy and we provide solutions for industry in Finland but also worldvide. We are official Makor dealer in Finland. Technical specs: Very little used vacuum extuding machine, year 2023. IN FEEDER FOR VACUUM mod. TEP 2000 reinforced version The in feeder, which is integral part of the vacuum coater, is equipped with high adherence belt and piece side guides. It is use to properly feed profiles in the vacuum head. TECHNICAL DATA TEP 2000 for vacuum Max. working width mm 220 Working height mm 850±30 Feed speed m/min 25÷150 Feed motor power (with inverter) kW 0,55 VACUUM EXTRUDING MACHINE mod. STORM WB Vacuum extruding machine for applying water base paints, designed in stainless steel plate (inox) and anti-adherence material. The machine is complete with a “cutting down” unit which allows a high reduction of the polluting emissions and a complete recovery of the excessive paint in order to reduce the consumption of paint to the minimum. PAINTING Extruding head realised in anti-adherence material. The head is complete with an adjustable profile guiding system, with paint adduction distributors. All the inner components are easily taken apart for a quick cleaning. A double diaphragm pneumatic pump with high capacity, transfers the paint from the tank to the extruding head, complete with a basket filter in stainless steel (inox) and an anti-pulse device for the interruption and feeding of the product. AUTOMATIC FILLING SYSTEM Automatic filling system for automatic decanting of the product directly from the paint drum to the tank of the machine. The system is also provided with an acoustic alarm in order to signal decrease of paint level inside the tank. Thanks to this system it is possible to maintain in circulation a minimum quantity of the product. CONTROL PANEL General electrical switch-board which is integral part of the aspiration tower equipped with control panel for the start-up and the control of the machine. Two vacuum indicating gauges for the control of vacuum degree and of loss of filter efficiency. TECHNICAL DATA STORM WB Compressed air consumption (~5 bar) nl/min 1500 Working height mm 870 +/-30 Turbines capacity (each) mc/h 470÷600 mbar 200÷250 Turbine motor power x 3 Kw 11 AUTOMATIC PRE-WASHING SYSTEM The automatic PRE-washing system allows a quicker product change or an easier maintenance of the machine. The cycle consists of the following phases: 1) Through a three-way valve the feeding pump sends the remaining product to an external container till the tank is completely empty. 2) Through hydric plant (at customer’s charge) the product tank is filled with water. 3) Turbines are activated while the previous three-way valve goes back to working position so that the feed pump can send in circulation the clean water for a defined time necessary for the washing. Podpfx Aetqu Dioggspw 4) The three-way valve goes back to discharge position and the tank is emptied by the washing water. 5) The automatic filling system activates for the new product.

Year of construction: 2022, condition: good (used), Manufacturer: Clextral Model: Evolum EV032 M Year: 2022 Condition: Used Serial Number: B145 Stock Number: 3385 Clextral extruder Type: Evolum EV032 M Extruder: 40D Barrel length: 10 x 128 mm Stroke length: 1420 mm Water: 4.5 - 5.5 Bar Compressed air: 6 Bar Steam injection: 2 - 6 Bar Power: 3 x 400V, 50Hz, 83kW Dimensions: 4475 x 1200 x 2100 mm Weight: 1905 kg Only 80 working hours! Clextral water pump Type: CLX DKM Flow: 6 - 42 l/h Pressure: max 10 Bar Reservoir: 7.5 litre Power: 0.55 kW Dimensions: 1265 x 350 x 700 mm Clextral / Prominent oil pump Type: GMXA1604 Flow: 0.3 - 2.5 l/h Pressure: max 10 Bar Reservoir: 10 litre Dimensions: 900 x 700 x 1150 mm Clextral High Moisture Extrusion Cooking die Ppodpfx Agezab Stegjw HMEC type: 2 x 800 mm length Material: CLX202 Internal section: 60 x 8 mm Dimensions: 1900 x 700 x 1200 mm TLV steam kit Type: 2/10 TLV Serial number: SV148 Steam flow: 2 - 10 kg/h Steam pressure: 6 - 10 Bar Maximum pressure:10 Bar Steam inlet: DN15, PN16 Steam outlet: DN15, PN16 Compressed air: 6 - 10 Bar Dimensions: 700 x 1600 x 2200 mm Weight: 150 kg 2 pc. Tooltemp thermoregulator Type: TT1398-3 Serial number: 321-5642-1 / 2 Year of construction: 2021 Power: 3 x 400V, 50Hz, 7.9kW Dimensions: 750 x 300 x 760 mm Weight: 70 kg WAM Group plowshear mixer Type: WBH20008C023 Serial number: 17WB220000121 Year of construction: 2022 Mixer: 75 litres Dimensions: 1200 x 1600 x 1650 mm Weight: 500 kg Immequip feeding screw Type: ELV 70/80-R Hopper: 150 litres Outfeed: Ø 100 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions: 3100 x 1350 x 2600 mm Brabender dosing unit Type: DDW-M-DDSR20 Serial number: 2200836.0636 Year of construction: 2022 Feed rate: 11 - 26 kg/h MTA France chiller Type: TAEevo TECH 081 Serial number: 2200377928 Year of construction: 2021 Refrigerant: R410A Cooling power: 20.6 kW Power: 3 x 400V, 50Hz, 14.2kW Dimensions: 1950 x 800 x 1500 mm Weight: 340 kg

Condition: new, Year of construction: 2023, Manufacturer: Source Technology Model: PowerHeater PH100-1 Year: 2023 Condition: New Serial Number: 65800-41-45074 Stock Number: 3384 PowerHeater PH100-1 Capacity: 150 - 240 kg/h Steam: 50 - 100 kg/h, 10 Bar Compressed air: 6 - 8 Bar, 50 Nl/min Water: 16 Bar, 1500 l/h Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 3000 x 1400 x 1800 mm Weight: 850 kg Pjdsy Tmnbopfx Aggopw Klovborg slab-outlet conveyor Serial number: 220188-2 Power:230VAC, 50Hz, 1Ph Dimensions:1250 x 500 x 1450 mm Weight: 65 kg Source Technology screw trolley (2 pc.) Serial number: 65800-41-110562 / 66400-33-110562 Working load: 250 kg Dimensions: 1500 x 1400 x 1950 mm Weight: 100 kg With Kito CX003 manual hoist

Year of construction: 2026, condition: new, functionality: fully functional, Conical laboratory single-screw extruder EX 60/30 The extruder is designed for processing light, free-flowing granular materials. Due to its screw size, the extruder is suitable for laboratory and testing applications. The nitrided screw with a conical inlet section is fed with materials via a hopper, which then flow through the large inlet opening into the cylinder. Subsequently, the raw materials are compressed in the cylindrical screw section and discharged through a die. A direct drive with an upstream thrust bearing forms the drive train. Ceramic heating bands also allow for high processing temperatures. A shielding cooling system is installed between the material hopper and the first heating zone. Optionally, we also offer the following machines: The strands are passed through a water bath with a stainless steel tank to the strand granulator. A screen changer can also be offered as an option between the extruder and the die. Ppodpfx Aozhamwjggjw Screw speed 150 Current 29.5A CEE-63A

Year of construction: 2020, condition: good (used), functionality: fully functional, For sale: Farmet FE1000 Clever Max industrial feed / soybean / grain extruder. Manufacturer: Farmet Model: FE1000 Clever Max Year: 2020 Main motor: 110 kW Throughput: approx. 900–2,100 kg/h depending on material and process setup Condition: used, fully functional Location: Slovakia, EU The extruder was used for approx. 2 years. Additional accessories were never used according to seller information. Included: Farmet FE1000 extruder Clever Max control system PLC control with HMI touchscreen Frequency converter for the main drive Stainless steel steam conditioner Cutting head Electrical control cabinet Accessories as shown in the photos Suitable for: soybean extrusion full-fat soybean processing cereal and grain extrusion oilseed meal / press cake processing compound feed production pet food and fish feed applications, depending on recipe and final line configuration Pedpfoxfcwmjx Aggjpw The Clever Max control system allows better adjustment of extrusion parameters through PLC/HMI control and frequency regulation of the main drive. This is a strong industrial extruder suitable for medium-capacity feed and oilseed processing plants. Sold as shown in the photos. Inspection possible. Loading possible. Worldwide shipping on request. Price: FCA Slovakia, plus VAT. Zu verkaufen: Farmet FE1000 Clever Max Industrie-Extruder für Futtermittel, Soja, Getreide und Ölsaaten. Hersteller: Farmet Modell: FE1000 Clever Max Baujahr: 2020 Hauptmotor: 110 kW Leistung: ca. 900–2.100 kg/h, abhängig von Material und Prozess Zustand: gebraucht, voll funktionsfähig Standort: Slowakei, EU Der Extruder war ca. 2 Jahre in Betrieb. Weiteres Zubehör wurde laut Verkäuferangabe nicht benutzt. Ausstattung: Farmet FE1000 Extruder Clever Max Steuerung PLC-Steuerung mit HMI Touchscreen Frequenzumrichter für den Hauptantrieb Edelstahl-Dampfkonditionierer Schneidkopf Schaltschrank Zubehör wie auf den Fotos Geeignet für Sojaextrusion, Vollfettsoja, Getreide, Ölsaaten, Presskuchen, Mischfutter sowie Pet-Food- und Fischfutter-Anwendungen je nach Rezeptur und Linienkonfiguration. Besichtigung möglich. Verladung möglich. Versand auf Anfrage. Preis: FCA Slowakei, zzgl. MwSt.

Year of construction: 1995, condition: good (used), functionality: fully functional, Bausano complete granulating line, including generator. Ppodpfxezcarqo Aggow Output: 350-400 kg/h.

Condition: refurbished (used), functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. Ppodpfxozl A N Nj Aggow TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Year of construction: 2008, condition: good (used), This extruder line from Kuhne is in machine storage at Plastima Used Machinery. The machine is from 2008 and in excellent condition. Ppedpfjyxn T Nox Aggow Brand: Kuhne GmbH Model: K 60E - 33D Screw type: single screw Year of construction: 2008 Screw diameter Ø: 600 mm L/D ratio: 33 Cylinder height: 425 mm Cone height: 325 mm Total height: 750 mm

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: 1930036, operating hours: 6,900 h, This is a used twin-screw extruder for processing moist materials. (A complete overhaul is included in the price and will be carried out by Brabender/now Anton Paar.) The machine was used to produce textured soy protein in a purely vegan facility. The textured soy protein is moist, and it was used to produce vegan products such as "cutlets," "fish," "nuggets," "bacon," etc. Podpfx Agszhnluogspw

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, power: 52 kW (70.70 HP), screw conveyor diameter: 49 mm, machine/vehicle number: DE27566, TECHNICAL DETAILS Capacity: 150 – 250 kg/h Screw diameter: 2 x Ø 49.7 mm L/D ratio: 32D MACHINE DETAILS Motor power: 52 kW (DC) Psdpfx Agszd Scpsgopw Control system: analog, contactor-controlled system EQUIPMENT Synchronous motor Degassing Vacuum pump

Year of construction: 2017, condition: ready for operation (used), Granulation line, regranulation extruder, Yei machine I. PE/PP waste regranulation line, model: YDN-120 Material: PP/PE Maximum capacity: PP: 550 kg/h PE: 650 kg/h Installed power: 420 kW Power consumption during operation: approx. 250 kW Water consumption: approx. 25 l/min Required water pressure: 3 kg/cm² 1) Extruder Designed for double degassing Double-stage gearbox Screw diameter: 120 mm Made of SACM 645 steel, chrome-plated and hardened L/D ratio: 32:1 Rotation speed range: 0-130 rpm Heater power consumption on the barrel: 51 kW Number of heating zones on the barrel: 5 Barrel cooling: 1/8 HP x 5 fans Motor: 175 HP, controlled by a frequency inverter 2) Screen changer, 15 HP Filter area: 90,639 mm² x 2 Equipped with a pressure sensor with alarm. In case of excessive pressure, the machine will automatically shut down. One temperature control zone. 3) Knife system for granulating at the extruder head Number of knives: 4 pcs Temperature control: 1 zone Heating power: 3.5 kW 2 heads for PE 4) Water cooling system Motor: 5 HP, controlled by a frequency inverter 5) Shredding and pre-compacting drum Vertical type with temperature sensor Motor power: 150 HP, controlled by a frequency inverter Equipped with 12 rotary knives and 17 stationary knives Mill diameter: 1300 mm Blower: 7 1/2 HP Continuous water cooling device 6) Belt conveyor Pedozhm Ihjpfx Aggspw Dimensions: 4950 mm (length) x 670 mm (width) Motor: 2 HP 7) Vibrating dryer Water pump: 5 HP x 1 Vibration motor: 1/4 HP x 4 pcs Water tank dimensions: 3615 mm x 700 mm x 471 mm 8) Regranulate silo (with a centrifugal blower of 7.5 HP with a transport pipe) 9) Control panel Indicates the operating status of all major electrical devices The machine is equipped with a double cylinder screen changer, allowing for screen changes without stopping the machine. The line is designed in a compact way, which saves usable space. The device requires maintaining the cooling water temperature: 25-35°C Equipment: Enlarged drum to 1300 mm with 150 HP motor Second degassing port on the first screw with a vacuum pump Metal detector 5 HP centrifuge Second "cascade" plasticizing module (150 mm screw) with filter with a single degassing port and vacuum pump double-stage gearbox Parameters of the second plasticizing module Screw diameter: 150 mm Made of SACM 645 steel, chrome-plated and hardened L/D ratio: 20:1 Rotation speed range: 0-130 rpm Number of heating zones on the barrel: 2 Motor: AC 75 HP, controlled by a frequency inverter Control panel Hydraulic screen changer x 2 cylinders Additional equipment Increased filter area on the first screen changer: Standard: diameter 140 mm x W126 mm = 55,389 mm² x 2 After enlargement: diameter 204 mm x W141.5 mm = 90,639 mm² x 2 The delivery includes additional cooling for the control cabinets Static mixer with a connecting pipe for homogenization and uniformization of the mass.

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: LE-2104-133, For Sale: Labtech LE30-30/C 3D Filament Extrusion Line We are offering for sale a high-quality 3D filament extrusion line manufactured by Labtech Engineering Co., Ltd., a well-known producer of laboratory and production extrusion equipment. Technical Specifications Manufacturer: Labtech Engineering Co., Ltd. Model: LE30-30/C Year of Manufacture: 2021 Power Supply: 400 V Phase: 3 Installed Power: 16.7 kW CE Certified Price: EUR 45,000 Condition The machine is in excellent condition, has been professionally maintained, and is ready for immediate production use. Included in the Sale Complete 3D filament extrusion line Additional spare barrel 25mm Additional spare screw 25mm/24D Optional Equipment Available for Purchase Laser diameter gauge Material dryer Material feeding/dosing system This extrusion line is suitable for the production of high-quality 3D printing filaments and offers reliable operation with consistent output quality. Pedpfxezgwlzo Aggjpw Additional photos, technical details, and machine inspections can be provided upon request. Location: Ivanka pri Nitre

Year of construction: 2000, condition: ready for operation (used), SINGLE SCREW EXTRUDER GRAEWE-FANGLI 60X33 Application: PE PIPES or PP PIPES Typ: 60 X 33 Screw diameter:60 Podpfx Ageifgwhegspw Drive: 75 KW Output capacity PE: approx. 200 - 250 kg/h Condition: Good, ready to use The extruder is my property Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Year of construction: 1999, condition: ready for operation (used), AMUT EA90/24 SINGLE SCREW EXTRUDER Type: RALDI Screw for PVC oil cooled Application: PVC, PE or PP Working hours 48.000 Podpfxsk Nn Dze Aggjpw DC Drive 36,3 KW Year of construction: 1999 11 digital heating controllers Melt pressure and melt temperature display SIEMENS SIMATIC DISPLAY Operating hours: 48,119 h Trigger control via the extruder possible Condition: Good operational The extruder is my property Sachal extrusion machines D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 Germany

Year of construction: 2011, condition: excellent (used), SINGLE SCREW EXTRUDER GRAEWE-FANGLI 90X33 Typ: SJ90X33 A6 Application: PE PIPES or PP PIPES Screw diameter: 90 Drive: 160 KW Output capacity PE: approx. 400 - 450 kg/h Condition: Good, ready to use The extruder is my property Sachal Extrusionmachines Bahnhofstrasse 6 Ppodpfx Ajifgwleggew D-26345 Bockhorn/Grabstede Germany

Condition: like new (used), Extruder hose sections for Weber DS 10.22. Ppsdpfjhlvm Njx Aggsw

Condition: good (used), Krispy Kreme machine in lovely condition. Try and find another, probably the only one for sale in Europe and in much nicer condition than the ones for sale in the US. Psdpfxjvtg U As Aggopw

Condition: excellent (used), Year of construction: 2006, 2-component extruder Originally built for Silicone, but used for Polysulphide Can be easily made to work with Silicone Ppsdozdyvwopfx Aggew Hydraulic More technical information can be found attached as Tech. data file Excellent condition Good working order, tested As is Available immediately

Year of construction: 2003, operating hours: 65,470 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: Titan 68R-APC/ 2 68F-60-40-1100-UT, Titan 68R-APC/2 68F-60-40-1100-UT with tungsten carbide cylinder and screw (designed for WPC-HDPE base) Very good feeding behavior and good processing. Screw modification for optimal use, including in the recycling sector. The system has been completely overhauled and is ready for use. Feeder optionally available. SIHI vacuum pump. For throughputs up to 400 kg/h. For highly filled compounds, approximately 180 kg/h. Pjdpfx Ajzh Edneggjpw 4-zone heating.

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, 1.1 General Features Extruder Type - Horizontal Screw Diameter (D) - 30 mm Screw Length (L/D) - 25 net (L: Effective length as specified according to Euromap-20 standards) Raw Material - PVC-W (soft) / PE / PP / TPE / TPV (in granule form) Application - Gasket profile Capacity - 12-18 kg/h (Capacity may vary depending on the characteristics of the raw material) Extruder Zone - 5 = 3 + 2 (3 on the barrel, 2 for die-head control) Extruder Main Motor and Driver - 4 kW (Yılmaz Gearbox) / 4 kW Siemens/ABB AC Driver Extruder Control - Extruder Height - 900-1200 (adjustable) mm (Can be changed according to customer’s request) Die-Head Connection - Flange connection Extruder Colour - RAL 7043–RAL 7047–RAL 3020 (Extruder colour can be changed according to client’s request) Die-Head Unit - Not included Pressure and Temperature Sensor - Not included Electrical Panel - 380-400V / 50-60 Hz Languages - English 1.2 Technical Details Barrel - Barrel Dimension: Ø30/25D - Barrel Zone Number: 3 - Cooling System: Air - Heating System: Ceramic resistance - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The barrel is made of 1.8550 (DIN 12891) nitriding steel and long-term gas nitrided to 66-70 HRc with a hardness depth of 0.5 - 0.7 mm. - A flange connection will be used between the extruder and the die head. Screw - Screw Dimension: Ø30/25D - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The screw material is made of DIN 1.2891 (1.8550, 34 CrAlNi 7) nitriding steel and long-term gas nitrided to 66-70 HRc hardness at a depth of 0.6-0.7 mm. - The screw will be manufactured in an EBM Barrier design for good homogeneity. Heating System - Heating is provided by ceramic insulated band heaters, certified according to CE and ISO 9001:2008. - There are 3 heating zones on the barrel. Cooling System - Cooling is provided by centrifugal blowers from TUV-certified EBMpapst, Germany. - There are 3 air cooling zones on the barrel. Reducer Gearbox - A TUV-certified YILMAZ brand, 4 kW DRE series horizontal helical reduction gearbox will be used. - The motor has an additional cooler for protection against higher loads. - The motor speed will be controlled via an ABB ACS-880 brand 15 kW inverter drive. Electric Control Cabinet - The electric control cabinet is equipped with ISO 9001:2008-certified equipment. - There will be one main electrical panel. The control panel will be located on the extruder. Pjdpfx Agjzarn Ejgopw - The extruder is controlled by the main electrical panel. - This includes speed control of the drive and zone temperatures, which will be controlled by this PLC system. - A 7” touch screen will be used on the extruder (master unit). Thanks to this panel, two extruders can be fully controlled. - The extruder’s screw speed can be adjusted steplessly by means of a 4 kW Siemens / ABB AC frequency motor driver. The following information can be accessed via the touch screen: ● Extruder screw speed, ● Zone temperature set points, ● Actual values, ● Extruder motor current, - more details available

Year of construction: 2005, condition: ready for operation (used), Screw diameter: 114mm, max. PVC throughput: 600 kg/h, max. screw speed: 20/min, number of heating zones for molds: 12, motor power: 76 kW, rated voltage: 3x 415V AC, rated current: 353A, rated power: 218kW, weight: 7.1t, operating hours: approx. 90,000h. Screws: Geometry designed for PVC profiles, water-cooled, cylinders: nitrided, air-cooled, equipped with a new PLC control system, vacuum pump, and power inverter for the main motor. An on-site inspection is possible. Ppjdpozh Nibjfx Aggsw