Used Martin Wide Planer for sale (8,053)

Condition: used, Year of construction: 2006, Motor-adjustable parallel stop, length stop with display, single-sided motorized pivoting, sliding carriage 3000 mm, 5.5 kW, pre-cutter. Lhjdpfjzawiusx Abyjh Location: Supplier.

Condition: excellent (used), Year of construction: 2000, Robust swiveling milling machine T 26, swiveling from -45 to +45 degrees Ljdszbm Tfepfx Abyohh Reversible drive motor 5 / 6kW with automatic motor brake R/L rotation Swiveling angle from -45 to +45 degrees, electrically adjustable Height adjustment max. 150mm, electrically adjustable When the height is adjusted, the correction factor for the swiveling angle is displayed in the upper display, which can then be set on the stop, allowing settings to be realized according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, quick-change spindle with torque wrench Comfort stop T226 with digital displays for total adjustment and infeed fence individually, as well as input of the cutter diameter, with automatic calculation of the cutting depth. Stop with lifting device, swiveling away (for curved milling work) Table extension on the right and left with extendable workpiece support Support can be extended by 700mm Table length approx. 2400mm Folding stop for plunge milling Workpiece clamping device Aigner Centrex Original Martin cast iron table top, left 500mm, right 500mm with two insertion guide rails 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers Feed connection, switchable from the control panel Comfort stand with electrically height-adjustable feed support, which can be swiveled away for machine setup and then easily locked back into place. Dust extraction port 2 x 120mm Compressed air connection 6 bar Emergency stop switch Some parts of the machine have been newly painted (special color RAL1015) V-belt renewed Operating manual CE marking Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this provider".

Condition: good (used), Year of construction: 1982, Gebr. Martin Thicknesser Type: T 42 Year of construction: 1982 planing width 630 mm Ledpfx Ast U Rn Sebyshh planing height 250 mm Feed rate 8-20 m/min Suction nozzle 160 mm Weight approx. 870 kg Rubberized infeed and outfeed roller Two-knife shaft with strip planer knives Central lubrication Planing height via handwheel adjustment Star-delta switch Location: ex stock 54634 Bitburg: - immediately available -

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Ledpfx Abepgkmweyehh Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. Lhedpfx Aspq If Debyeh The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Lodov Erkaspfx Abyjhh Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit Lodjw D T Dkopfx Abyehh T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Martin T 27 Flex Swivel Spindle Moulder – double-sided tilting – Flexibility for today and tomorrow. Setting up a tilting spindle moulder is usually a major challenge. Not with the T27 Flex and its modern touchscreen control: thanks to integrated tool offset management, you can set up even complex moulding profiles with a tilted spindle in no time. This allows you to make full use of the wide swivel range of 2 x 46°, letting you follow your requirements with complete flexibility. Additionally, the machine can be configured precisely to suit the specific needs of your operation. Equipment includes: - T 27 Flex Lodpfx Abor Hr D Neyehh - T 2711-a Digital indication of fence jaw position via the control system - T 2731-a Table extension on both sides + extendable workpiece support - T 2740-a Centrex guard - T 2742-a Integral fence - T 2743-a Auto Lock spindle moulder fence jaw clamping system - T 2790-La Console for feed unit stand, left side attachment The photo shows a sample machine only / feed unit and support not included Included scope of delivery is described in the text above Location: Arriving in stock at 54634 Bitburg - Available in two weeks -

Condition: new, Year of construction: 2025, Martin T 45 thickness planer with Tersa cutterblock Accessories: 7,5 KW The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Lhedpfx Abjqlclboyoh Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Angle adjustment Lhedpfx Aowtl N Djbyoh Speed control Central spindle lubrication 5 kW motor Spindle diameter 30 mm Table length 240 cm Table width 35 cm Support extendable up to 80 cm Request more information

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 400 mm turning diameter over support: 220 mm turning length: 1100 mm centre height: 180 mm Lhedpfx Asu Ix E Hsbyeh spindle passage: Ø 45 mm range of revolution per miute: 31,5 - 1.400 / 12 step U/min range of feed in x - axis: längs: 0,08 - 1,10 m/min range of feed in y - axis: quer: 0,028 - 0,40 m/min tailstock quill taper MT: MK4 tailstock quill adjustment: 200 mm total power requirement: 4,0 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,5 x 1,1 x 1,4 m Equipment: -Three-jaw chuck Ø 250mm manufacturer Forkardt with interchangeable jaws -Multifix steel holder -Cooling water device with pump -chuck guard -chip collecting tray -chip guard Accessories: -chuck spanner -tool holder -2 pieces gears *

Year of construction: 1958, condition: ready for operation (used), Offered is a conventional lathe. Swing diameter over bed: 500mm, swing diameter over support: 300mm, spindle bore: 58mm, taper in the tailstock quill: MT 4, design: conventional leadscrew and feed rod lathe, control: manual. Equipped with three-jaw chuck, four-way tool post, tailstock, chip tray. Weight: approx. 2200kg, overall dimensions X/Y/Z: approx. 2700mm/1100mm/1350mm. Inspection possible by arrangement. Lsdpfxjzdknwj Abyohh

Condition: used, Slider length: 2500 mm Cutting width at the fence: 1000 mm Cutting width at the rip fence: 2800 mm Cutting depth: 120 mm Scoring saw: no Saw blade height adjustment: handwheel Saw blade swivel adjustment: handwheel Fence adjustment: manual Saw blade angle display: scale Cutting height display: - Fence display: scale Rip fence scale: scale Saw blade diameter: max. 400 mm Speeds: 2800 / 4000 / 5500 Motor power: 5.5 kW Ledoy S Rq Depfx Abyehh Dust extraction port: 120 mm Machine length: 3000 mm Machine width: 1800 mm Weight: approx. 1300 kg

Condition: used, Year of construction: 1951, machine/vehicle number: 6886, turning diameter over bed:500 mm turning diameter over slide rest:300 mm turning dia. in gap:760 mm turning length:1100 mm centre height:250 mm feeds - cross:0,023 - 0,32 mm/U feeds - longitudinal:0,07 - 1,0 mm/U pitch thread:4 / 12 fach spindle passage:65 mm turning speeds:13 - 600 U/min thread - mm pitch:0,5 - 84 mm thread - inch:0,375 - 14 inch. quill stroke:200 mm total power requirement:3 kW Ljdpfxjcxxq Uo Abyehh weight of the machine ca.:2,7 t dimensions of the machine ca.:2,8 x 1,2 x 1,25 m with long. & lat. feed, 3-jaw chuck, diameter 380 mm; turning meter above bed without bridge 760 mm

Condition: used, Year of construction: 2002, Sawblade tiltable 46 ° Lhjdpsy Spv Eofx Abyoh Length of the rolling table ~ 3.200 mm cutting width ~ 1.100 mm Cutting height max. 170 mm Saw blade diameter max 500 mm Motor output 5,5 kW Scoring unit 0,75 kW Martin T 73 Classic sliding table saw for precise cutting of solid wood, panel materials and coated materials with swivel saw blade and scorer. The machine enables precise rip, cross and mitre cuts and is designed for daily use in professional woodworking. Includes a comprehensive range of saw blades.

Condition: used, Year of construction: 1982, Includes a brand new star-delta switch. Used Good condition Cleaned Lodpfszbc D Hex Abyjhh Functionally tested Overhauled Manufacturer: Martin Type: T23 Year of manufacture: 1982 Machine no.: 82468 Motor kW, increased power: 4.7 / 5.7 Swiveling range: 0 - 45° Motorized / mechanical brake: Foot brake Motor, 2 speeds / pole-changing: yes Speed stages rpm: 3 / 4.5 / 6 / 9000 Right-left rotation: yes Table size l x w mm: 1100 x 950 Milling arbor diameter mm: 30 Milling fence with fine adjustment: yes Socket for feed mechanism: yes Dust extraction connection mm: 100 / 120 Space required approx. L x W x H mm: 1100 x 950 x 1100 Weight approx. kg: 1000 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected Without warranty and guarantee.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: V 453572, functionality: fully functional, operating hours: 1,770 h, power: 6 kW (8.16 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: AC, spindle diameter: 30 mm, pivoting range: 90 °, rip fence adjustment: motor-driven, actuation type: electric, rotational speed (max.): 9,000 rpm, rotational speed (min.): 3,000 rpm, table width: 900 mm, table length: 2,405 mm, total length: 3,000 mm, total width: 1,260 mm, total height: 1,800 mm, overall weight: 1,300 kg, year of last overhaul: 2026, Equipment: CE marking, Martin T26 DuoControl Spindle Milling Machine Ljdpfxezamwus Abyohh 5/6 kW (6.8/8.2 hp) - 400 V, 50 Hz with neutral conductor in CE configuration with 2-axis control for spindle height and milling fence, electromechanical swivel adjustment with digital display, incl. swiveling control panel with safety device type CPS Gamma V *with milling arbor 40 mm / 160 mm length //Table size: 2405 mm x 900 mm //Table height: 900 mm //Table openings: electric 70 mm - 220 mm //Weight: 1300 kg //Speeds: 3000/4500/6000/9000 rpm with belt quick-change system //Displays: electric speed display Digital (LED) for spindle height (absolute and relative) and swivel angle automatic display of the correction value for the milling depth Dual operating hour counter for total and batch run time //Milling spindle: electrically swiveling via push button +/- 45.50° electrically adjustable in height with rapid and creep feed, with steep taper SK 40, Dornfix quick-change system incl. torque wrench wear-free, electrically braked Electro-pneumatic locking via selector switch //Spindle stroke: 150 mm at 5/6 kW and 7.5 kW, 125 mm //Milling fence: Aigner integral fence Milling jaws made of aluminum, hard-coated, with mounts for groove board or guide strip Handwheel adjustment with mechanical digital counter Infeed jaw adjustable separately Maximum WZ diameter 250 mm //Extraction: Extraction port 120 mm diameter on the milling fence Extraction port 120 mm diameter under the table //Maintenance equipment Central lubrication via pump Lubrication of the milling spindle via grease volume regulator 1 x open-end wrench 1 x torque wrench for Dornfix system 1 x oil pump 1 x grease pump filled with long-life grease 1 x ball bearing for guide ring 62 mm 1 x arc milling guard FRS95 for milling operations on the guide ring, with extraction port and feed strip //Electrical equipment: Lockable main switch, automatic star-delta start, electric brake wear-free Contact for controlling the extraction, undervoltage protection, CEE torque connection for feed unit (= 5-pin socket) Operating push button for direction of rotation selection, motor circuit breaker and winding protection BG test certificate No. 991002 GS wood dust tested No. 991001 EC type-tested No. 991003 Additionally: 1 x Electrically adjustable table opening 1 x Support for feed unit mount, swiveling with motorized height adjustment with control panel 1 x extendable table extension

Condition: good (used), Martin panel saw Sliding table: 170 cm Blade tilt and up/down adjustment: hydraulically controlled Motor: approximately 7.5 kW Maximum blade diameter: 450 mm Ljdpfjy Uw Syex Abyohh Overall machine width when in operation: 380 cm Condition: good, the motor fan guard is missing, but the machine still functions properly.

Condition: excellent (used), Year of construction: 1992, Tilting spindle moulder with sliding table Manufacturer: Martin Model: T25 Year of manufacture: 1992 Tilting range: -5° to +45° Height and angle adjustment: Electric Spindle diameter: 30 mm Power: 5/6 kW Spindle speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Reversible spindle direction: Yes Motor brake: Yes Right-side table extension with pull-out stop Lhedpfey Ahplsx Abyjh Left-side table extension with sliding table Sliding table for slotting operations Slotting guard Haffner feed unit with 3 rollers – stepless adjustable Weight: Approx. 1,500 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, power: 8 kW (10.88 HP), pivoting range: 45 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,000 rpm, tilting table milling machine MARTIN. Type T23, spindle diameter D=30mm, spindle swivel function, table extension to the left and right. Lhsdozakl Aopfx Abyoh

Condition: excellent (used), functionality: fully functional, operating hours: 50 h, input voltage: 400 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, spindle diameter: 30 mm, Equipment: CE marking, documentation/manual, As new. Ready to ship. Ledpfeytfq Tjx Abyehh

Condition: excellent (used), Motor: 4.7/5.7 kW Spindle: 30 mm Lhsdpfjy S S H Hsx Abyjh Table length: 100 cm

Condition: used, Year of construction: 1978, Spindle tiltable: Yes, 0 - 45° Height adjustment: Handwheel Swivel adjustment: Handwheel Fence jaw adjustment: Manual Lhedouzkxfepfx Abyjh Height display: - Swivel angle display: Scale Fence display: Scale Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 9000 rpm Motor power: 5 kW Motor brake: Yes, foot brake Extraction port: 2 x 100 mm Machine length: 1200 mm Machine depth: 1400 mm Weight: 800 kg

Condition: used, Year of construction: 1981, Working width: 510 mm Planer shaft: strip knives Number of knives: 2 Surface table length: 2600 mm Surface table adjustment: hydraulic / foot pedal Concave-convex joint adjustment: yes Chip removal display: scale Concave-convex joint display: scale Surface fence angle adjustable: yes Lhjdpfey Hqdgjx Abyeh Motor power: 5.5 kW Motor brake: yes, automatic Machine length: 2600 mm Machine width: 1000 mm Weight: 1050 kg

Condition: used, Year of construction: 1997, Tilting spindle: Yes, -5 to 45° Height adjustment: electric Tilting adjustment: electric Table opening: electric Fence adjustment: manual Height display: digital Tilt angle display: digital Milling fence display: digital Spindle diameter: 30 mm Lhodpfey Hqd Hox Abyeh Speeds: 3000, 4500, 6000, 9000 Power consumption: 5 / 6 kW Motor brake: Yes, automatic Extraction port: 2 x 120 mm Machine length: 2500 mm Machine width: 1400 mm Weight: 1100 kg