Used Meccanotecnica Lega 55 for sale (6,005)

Condition: good (used), Size: 320 x 420 mm; min 75 x 150 mm Bljdpfx Apjr Duu Aovsk Speed: max 9000 Ex./h Number of stitches Standard: 11 Stitching length: 19 mm Power requirements: 50 Hz, 3 Phasen kW (220/380V, 50Hz) Compressed air: 4 bar Weight: 2300 kg (approx.) Engine speed: 2,5 kw

Condition: good (used), Machine number 20703-14303 Built in 1989 Size max 320 x 420 mm min 90 x 150 mm Speed max 9000 c/h Number of stitches Standard 11 Power requirements 2,5 kW (220/380V, 50Hz) Air requirement (6 bar) 200 m³/h Length 2530 mm Width 1550 mm Height 1600 mm Weight 2300 kg (approx.) Bledpfjvwkgkjx Apvok

Condition: new, Year of construction: 2025, power: 40 kW (54.38 HP), motor manufacturer: New Holland, gearing type: mechanical, fuel type: diesel, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 2,931cc Torque: 203 @ 1400 Nm @ rpm Dimension: 3,500 x 1,920 x 2,200 axle configuration: 2WD No. of cylinders / aspiration: 3 / naturally Capacity (cm³): 2931 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 40.25 / 54.0 Max. torque (gross) (Nm@rpm): 203 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 0.96 Optional without creeper (F+R) 12+3 Speed range (kph) 2.0-29.74 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft Bedpfsy Tyg Dsx Apvolk mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1400 Maximum lift capacity at ball ends with assist arms (kg) 1850 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3205/4200 Dimensions Overall length 2WD/4WD (mm) including FWC 3500 Overall width 2WD/4WD (mm) 1920 Height to top of exhaust 2WD/4WD (mm) 2200/2200 Wheelbase 2WD/4WD 2050/2005 Track width Front 2WD (mm) 1410-1710 Track width Front 4WD (mm) 1445-1875 Track width Rear Min. / Max. (all axle types) (mm) 1570-2100 Ground clearance under rear axle (2WD/4WD) (mm) 455/434 Weights Minimum weight 2WD/4WD (kg) (With ROPS & FWC 55Kg) 2200/2400 = More information = Drive: Wheel Number of cylinders: 3 Engine capacity: 2.931 cc GVW: 2.200 kg Wheelbase: 205 cm Engine type: New Holland S8000 Emission class: Euro 2

Condition: new, Year of construction: 2025, power: 40 kW (54.38 HP), motor manufacturer: New Holland, gearing type: mechanical, fuel type: diesel, maximum speed: 30 km/h, total height: 2,200 mm, total length: 3,500 mm, total width: 1,920 mm, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 2,931cc Torque: 203 Nm @ 1400 rpm Dimension: 3,500 x 1,920 x 2,200 No. of cylinders / aspiration: 3 / naturally Capacity (cm³): 2931 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 40.25 / 54.0 Max. torque (gross) (Nm@rpm): 203 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 0.96 Optional without creeper (F+R) 12+3 Speed range (kph) 2.0-29.74 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft Bodpey Tyg Rofx Apvslk mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1400 Maximum lift capacity at ball ends with assist arms (kg) 1850 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3205/4200 Dimensions Overall length 2WD/4WD (mm) including FWC 3500 Overall width 2WD/4WD (mm) 1920 Height to top of exhaust 2WD/4WD (mm) 2200/2200 Wheelbase 2WD/4WD 2050/2005 Track width Front 2WD (mm) 1410-1710 Track width Front 4WD (mm) 1445-1875 Track width Rear Min. / Max. (all axle types) (mm) 1570-2100 Ground clearance under rear axle (2WD/4WD) (mm) 455/434 Weights Minimum weight 2WD/4WD (kg) (With ROPS & FWC 55Kg) 2200/2400 = More information = Drive: Wheel Number of cylinders: 3 Engine capacity: 2.931 cc GVW: 2.400 kg Wheelbase: 205 cm Engine type: New Holland S8000 Fuel tank: 60 litres Emission class: Euro 2

Condition: excellent (used), Vecoplan chipper for saw cuts Hacker 55/26/2 - German production - reverse - for the production of technological chips - a powerful shaft with a diameter of 650 mm TECHNICAL PARAMETERS: - 550 mm slot width - inlet height 260 mm - two knives - engine power 110 kW - conveyor belt length 5000 mm Bjdpfx Asihpg Espvolk - 50 x 50 mm sieve - three upper pulling toothed shafts - four lower pulling toothed shafts - rotor width 650 mm - rotor diameter 650 mm - hydraulic lifting of the feed rollers - feeder height from the base 1100 mm Transport dimensions 1100x245x240 cm weight about 10 t

Year of construction: 1995, condition: like new (used), Vecoplan VTH/55/15/2 edging chipper – German production – autoreverse – for the production of technological chips – year of manufacture 1995 TECHNICAL PARAMETERS: inlet width 550 mm inlet height 130 mm two knives engine power 55 kW conveyor belt length 4300 mm sieve 50 x 50 mm toothed upper pulling shaft toothed lower pulling shaft Bodpfxekth N No Apvolk rotor width 560 mm rotor diameter 560 mm hydraulic lifting of the feed shaft transport dimensions (length / width / height) 550 / 230 / 120 cm weight ~ 3000 kg

Year of construction: 1997, condition: good (used), Output: 55.6 kW Two cooling circuits: 2 x 27.8 kW Refrigerant: R 22 (uncharged) Bjdpfxog A Rq Ej Apvslk Year of manufacture: 1997

Condition: used, Baumüller frequency inverter 55-88 kW, BUM63A-150- removed from Krauss Maffei KM 18 C3 - removed from running machine - fully functionalmanufacturer: Baumüller Nuremberg type: BUM63A-150 Blsdpfx Apoltrpzjvsk spare part no.: 6443081 manufacturer no.: 345449 Dition: gebraucht

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 9911294-0120, Rotary indexing table DV 55, manufactured in 2014, can be used for pre- or post-machining. Bedpfxszpygto Apvolk In excellent condition! We have 2 units in stock at our Schlitz warehouse.

Condition: used, mileage: 6,95,423 km, power: 184 kW (250.17 HP), first registration: 08/2007, fuel type: diesel, empty load weight: 7,180 kg, maximum load weight: 7,745 kg, overall weight: 15,000 kg, tire size: 285/70 R19,5, axle configuration: 2 axles, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, number of seats: 2, Equipment: ABS, central locking, cruise control, differential lock, truck registration, | DAF LF 55.250 Flatbed | Palfinger PBS-1500 Tailgate Lift, 1500 kg capacity | EURO 4 | Sliding roof | Electric windows, electric mirrors | Manual transmission | Cruise control | Engine exhaust brake | Tool box | Errors and prior sale excepted. Bodpfx Aozm I N Dopvslk

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 35-55 CX / machine in very good technical condition Year of manufacture: 2008 injection unit: Screw diameter: 18 mm injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit : clamping force: 35 t tie bar distance: 320x320 mm size of clamping platens: 540x540 mm Ejector: hydraulic clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Air valve x 2 Control with hot runners x 6 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service Krauss Maffei in Germany. It is possible to change the screw diameter for fi 20 mm, 22 mm Dimensions: Weight: 2600 kg Length/width/height: 3.50x1.40x1.70 m Drive: Pumps/motor: 11 kW Heating power: 3,78 kW Bedpozc Nfyefx Apvslk Total power: 14,78 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2011, operating hours: 48,000 h, machine/vehicle number: IntNr231180, DMG Gildemeister CNC Multi-Slide Automatic Turning Machine MSL 60/7 Year of manufacture: 2011 Machine on-time: 56,000 hours Automatic cycle hours: 48,000 hours CNC control: FANUC 31i – Model A, 7 axes Technical specifications Bljdpsznulbofx Apvok - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 60 mm - Spindle speed: 5,000 rpm - Spindle drive power: 7.5 kW COUNTER SPINDLE (on turret) - Max. bar diameter: 42 / (60) mm - Spindle speed: 5,000 rpm - Spindle drive power: 3.7 kW Driven tools (turret): - Tool drive power: 3.7 kW - Max. speed: 6,000 rpm Back-side machining: - 4 fixed tool stations - Capacity for up to 14 tools possible Bar feeder: FMB Turbo 5-55 / 3200 / A Year of manufacture: 2008 Bar diameter: 5 – 55 mm Bar length: 3,200 mm Chip conveyor included Machine can be inspected under power by appointment. Technical data, details, and prior sale subject to change and error.

Condition: new, functionality: fully functional, Features of the Unit 1. Chain conveyor belt, 2 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotative end sealing unit, double sealing jaw 5. Robust, central fin seal structure 6. Three servo-controlled drives 7. HMI control panel 8. Two individual temperature controllers 9. Housing made of 304 stainless steel 10. Documentation in the local language 11. Print mark control 12. Programmable bag length 13. Standard running direction: left to right Technical Specifications 1. Product length: L90–300 mm 2. Product width: W30–160 mm Blsdpfxoydqahj Apvjk 3. Product height: H5–55 mm 4. Packaging speed: up to 125 products/min (depending on product, bag length, material, and number of sealing jaws) 5. Maximum film width: 370 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 6.5 kW 8. Machine weight: approx. 400 kg 9. Machine dimensions: approx. 3500 x 950 x 1450 mm

Condition: used, functionality: fully functional, Air Liquide Arpege 55 Liquid Nitrogen Container With Storage Racks. Main characteristics include: Blsdpfxjupttgo Apvek - Aluminum vessel for both the long holding time and large capacity line: - Long holding time - Large capacity - Light weight and resistant - High quality polyurethane paint - On wheels Good working condition. Please check out our other listings as well.

Condition: good (used), Year of construction: 2008, operating hours: 45,000 h, Used, oil-free, variable 55 kW screw compressor ALMIG LENTO 55 WK (water-cooled) The compressor is in good, neat condition. Year of construction: 2008 Operating hours: 45,000 operating hours Technical specifications Type: LENTO 55 WK Possible operating pressures of the system (continuously adjustable): 5 - 10 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C: at 5 bar min / max: 1.41 / 7.79 m³ / min at 6 bar min / max: 1.40 / 7.74 ​​m³ / min at 7 bar min / max: 1.39 / 7.69 m³ / min at 8 bar min / max: 1.38 / 7.64 m³ / min at 9 bar min / max: 1.37 / 7.59 m³ / min at 10 bar min / max: 1.35 / 7.29 m³ / min Rated power drive motor: 55 kW Degree of protection / insulation class of drive motor: IE 3 Protection / insulation class fan motor: IP 54 / H Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ Cooling water requirement at 100% load (with inlet + 15 ° / delta t = 15 K): 55 l / min Cooling water supply (min / max): 5/35 ° C Cooling water outlet (max): 45 ° C Cooling water pressure (min / max): 4/10 bar Cooling water volume (min / max): 140 l / min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point refrigeration dryer 50% load: 3 ° C 100% load: 3 ° C Sound pressure level (DIN 45635 part 13) soundproofed, at 50% load: 64 dB (A) 100% load: 73 dB (A) Length: 2,300 mm Width: 1,400 mm Height: 1,560 mm Weight: 1,590 kg Bedpfegkbfhjx Apvjlk Compressed air connection: G 1 1/2 inches Visit our shop, we always have a large number of new and used compressors in stock.

Condition: good (used), Year of construction: 2023, operating hours: 159 h, Used, oil-free, variable 55 kW screw compressor Immediately available! (Subject to prior sale!) ALMIG LENTO 55 WK (water-cooled) with Air Control Premium controller The compressor is in very good condition and has only run for 157 hours so far. Year of manufacture: 2023 Operating hours: 157 h Technical data Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Bsdpfxsxud Eqe Apvelk Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: new, Year of construction: 2025, operating hours: 2 h, machine/vehicle number: LENTO 55WK, New Speed-controlled, oil free, water injected screw compressor ALMIG LENTO 55 LK Year of construction: 2025 technical spezifications: Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Bledpfoc Rt D Njx Apvek Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: used, Year of construction: 2013, Year of manufacture: 2013 240 V, IP 65 Operating pressure: 6-8 bar Blsdpfjzrglzsx Apvsk

Condition: like new (used), Year of construction: 2007, Horizontal conveyor LISEC KFL-55/22 Maximum working width 2200 mm Motorized Blsdpfxoiy Dh Hj Apvok With castor rollers Total floor dimensions: L 5800 x W 2300 mm Year of production: 2007 Very good and clean condition Good working order, tested Availability immediate

Condition: used, mileage: 4,99,999 km, power: 425 kW (577.84 HP), first registration: 09/2017, fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: air conditioning, parking heater, Vehicle No.: 172-26 Mercedes-Benz 3358 LS Arocs 6x4 HEAVY-DUTY Hydraulic system for low-bed trailers Mileage: 508,757 km Bljdpfx Ajzc Sq Sspvok * First registration: 09/2017 * EURO 6C * Wheelbase: 3,300 mm * L ClassicSpace cab * Engine: OM473 * TURBO-RETARDER coupling * Drivetrain >120 tons * Auxiliary drive * Pump: MB 131-2c * Transmission: G 330-12 * High-Performance Engine Brake * Differential lock, rear axle * Saddle height: 1,400 mm * Disc brakes, rear and front * 1 x sleeper berth * Refrigerator box * Auxiliary water heater * Air conditioning * Lane Keeping Assist * Distance Keeping Assist * Active Brake Assist 4 * Rear tire condition: 70-80% * Front tire condition: 50% * Next inspection: 10/2026 * Next emission test: 04/2027 * German vehicle Inspection possible during our opening hours at any time, test drive by appointment only! For export sales, a deposit will be retained, which will be refunded upon receipt of the proof of delivery. Company logos or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the functionality of the extras. All information is provided without warranty – errors, changes, typos and prior sale are reserved. Vehicle descriptions are explicitly not guaranteed characteristics. We refer to our general terms and conditions and ask that you take note of them.

Condition: excellent (used), Year of construction: 2022, Krauss Maffei KM 50-55 CX hydraulic injection molding machine Year of manufacture: 2022 STAR picker Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" control panel with a color touch screen. Plasticizing unit Complete plasticizing unit for thermoplastics with a screw diameter of 18 mm, with a backflow valve and an open nozzle Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Clamping unit - Clamping force: kN 500 - Opening force: kN 40 - Dimensions of the mounting plate (h x v): mm 600 x 600 - Distance between columns (h x v): mm 370 x 370 Bledpfxjzhwl Rj Apvek - Mold opening stroke: mm 400 - Minimum mold height: mm 200 - Opening width: mm 600 - Ejector stroke: mm 100 - Ejector force forward/backward: kN 23 / 10 Injection unit - Screw diameter: mm 18 - Ls/D ratio: - 22.2 - Injection pressure: bar 2500 - Injection volume: cm3 20 - Injection shot weight 1): g 19 - Injection speed: mm/s 150 - Injection rate standard: cm3/s 38 - Screw speed, standard: rpm 450 - Plasticizing capacity 1): - at standard screw speed: g/s 4.0 Electrical and hydraulic equipment - Rated power of the pump motor: kW 11 - Installed power of the heaters: kW 3.8 - Number of cylinder heating zones: - 4 - Dry cycle time / stroke according to Euromap 6 2): s/mm 1.2 / 259 - Oil tank capacity: dm3 180 Dimensions and weight - Net weight with control cabinet: t 2.55 - Machine dimensions (l x w x h) 3): m 3.53 x 1.41 x 1.96

Condition: good (used), mileage: 1,89,321 km, power: 55 kW (74.78 HP), first registration: 06/2021, fuel type: diesel, tire size: 205/60R16, axle configuration: 4x2, wheelbase: 2,760 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 4,500 mm, total width: 1,850 mm, total height: 1,860 mm, loading space length: 1,700 mm, loading space width: 1,450 mm, loading space height: 1,210 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Fabric - Partition = Notes = Configuration: 4x2, Payload: 823 kg, Unladen weight: 1397 kg, Gross vehicle weight: 2220 kg, Trailer load, unbraked: 740 kg, Trailer load, center axle, braked: 1400 kg, Cabin type: Single cab, Air conditioning, Number of airbags: 2, Parking assistance: Rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: White, Lighting type: Halogen lamp, Bluetooth, Engine power: 55 kW (74 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Extended and raised, Side wall paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, air conditioning, parking distance control, side door, Tire type: All-season tires = Additional Information = General Information Number of doors: 1 License plate: VJH-66-N Axle Configuration Tire size: 205/60R16 Brakes: Disc brakes Suspension: Coil spring suspension Bodpfjzmmkmex Apvelk Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 5 mm Weights Unladen weight: 1,397 kg Payload: 823 kg GVW: 2,220 kg Functional Loading area height: 60 cm Maintenance APK (Technical Inspection): valid until 05.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Leasing price: 161 € per month (van, 72 months); Ask for more information and conditions.

Condition: ready for operation (used), A manual Unitool micro and fine blasting cabinet is available. Operating pressure range: 0.5bar-10bar. Blasting media: aluminum oxide. Blasting media grain size: 120µm. Documentation available. An on-site inspection is possible. Bledpfezqfw Hex Apvjk

Condition: used, mileage: 74,000 km, power: 96 kW (130.52 HP), first registration: 08/2020, fuel type: diesel, overall weight: 3,500 kg, axle configuration: 4x2, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,300 mm, loading space width: 2,200 mm, loading space height: 2,280 mm, Year of construction: 2020, - Used Truck: Ford Transit 350 with Twin Rear Wheels and Aluminum Van Body. - Year: August 2020, Engine: 2.0 TDCi 130 hp Euro 6d, 6-speed gearbox, Mileage: 74,000 km. - 35 Quintals (3.5 tons) gross vehicle weight, twin rear wheels, leaf spring reinforcement kit. - Body: Aluminum van body, external dimensions 4,300 x 2,200 x useful internal height 2,280 mm. Marine plywood floor, full-height wood paneling, rear ladder. No. 1 toolbox, No. 1 safety lock (Meroni) on the rear doors. - Trend trim level, equipped with: Air conditioning, Radio-Bluetooth with USB, Fog lights, Central locking, Cruise control, On-board computer, Smartphone holder, LED daytime running lights, Two keys, Spare wheel, Driver airbag. - Bodywork and interior in excellent condition, mechanics with a 12-month warranty. - Valid inspection until September 2026, Single Owner Vehicle. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales Representatives: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como), Lombardy - Opening hours: Monday to Friday: 8:30 AM / 12:15 PM - 2:00 PM / 7:00 PM Saturday: 8:30 AM / 12:00 PM - 2:00 PM / 5:00 PM - Certified Mileage. - Test drive possible by appointment. - Ownership transfer can be arranged on-site. - Customized financing options available. Carlo Mauri Srl declines all responsibility for any unintentional inaccuracies in the advertisement, which does not constitute any contractual obligation. The prices shown are exclusive of VAT and ownership transfer costs. Blodpfx Aoyy Ni Ijpvsk

Condition: used, mileage: 74,000 km, power: 96 kW (130.52 HP), first registration: 08/2020, fuel type: diesel, overall weight: 3,500 kg, axle configuration: 4x2, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,300 mm, loading space width: 2,200 mm, loading space height: 2,280 mm, Year of construction: 2020, - Used Truck: Ford Transit 350 with Twin Rear Wheels and Aluminum Van Body. - Year: August 2020, Engine: 2.0 TDCi 130 hp Euro 6d, 6-speed gearbox, Mileage: 74,000 km. - 35 Quintals (3.5 tons) gross vehicle weight, twin rear wheels, leaf spring reinforcement kit. - Body: Aluminum van body, external dimensions 4,300 x 2,200 x useful internal height 2,280 mm. Marine plywood floor, full-height wood paneling, rear ladder. No. 1 toolbox, No. 1 safety lock (Meroni) on the rear doors. - Trend trim level, equipped with: Air conditioning, Radio-Bluetooth with USB, Fog lights, Central locking, Cruise control, On-board computer, Smartphone holder, LED daytime running lights, Two keys, Spare wheel, Driver airbag. - Bodywork and interior in excellent condition, mechanics with a 12-month warranty. - Valid inspection until September 2026, Single Owner Vehicle. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales Representatives: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como), Lombardy - Opening hours: Monday to Friday: 8:30 AM / 12:15 PM - 2:00 PM / 7:00 PM Saturday: 8:30 AM / 12:00 PM - 2:00 PM / 5:00 PM - Certified Mileage. - Test drive possible by appointment. - Ownership transfer can be arranged on-site. - Customized financing options available. Carlo Mauri Srl declines all responsibility for any unintentional inaccuracies in the advertisement, which does not constitute any contractual obligation. The prices shown are exclusive of VAT and ownership transfer costs. Blodpsxnrqnefx Apvsk