Used Pertici Univer 403 P for sale (42,239)

Year of construction: 1997, condition: refurbished (used), overall weight: 300 kg, total length: 1,270 mm, total width: 550 mm, total height: 570 mm, 4 spiral casing pumps in process design 1 of these completely overhauled, ball bearings of the pump and motor new. Mechanical seal overhauled by a specialist company. All seals new. Flow rate: 6 m³/h Head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type, drive side: oil Lubricant monitoring: oil level regulator Materials: Pump casing: Duplex steel Noridur 1.4593 (9.4460) Partition wall: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Hardened steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing housing lantern: Grey cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Suction nozzle nominal size: DN 80 Discharge nozzle nominal size: DN 40 Nominal pressure suction side: PN 10 Nominal pressure discharge side: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection type: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for: - Chemical and process industries Kjdpjiuznusfx Ab Hjdr - Sulfur and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and transport - Flue gas desulfurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment/sewage treatment plants - Offshore and marine technology

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, Used machine Manufacturer: Kallfass GmbH Model: Fully Automatic Side Sealing Machine Universa 500 Year of manufacture: 2016 Dimensions: approx. 2150 x 1800 x 1550 mm (L x W x H) Weight: approx. 1050 kg Transverse sealing bar: 500 mm Film: semi-tubular film, approx. 12 - 80 µm Max. film roll outer diameter: 400 mm Max. film roll width: 600 mm Min. product length: 80 mm Kdodpfx Absyw Rn Ts Hjr Passage height: 200 mm Working height: 780 - 930 mm Power connection: 400 V three-phase, 50 Hz with protective earth Rated power: 3.5 kVA Rated current: 5.1 A Fully automatic tubular bag machine for packaging products—regardless of their length—in full wrap and without film overlap. Product feed is via a conveyor belt with simultaneous wrapping in a semi-tubular film using a forming shoulder. Product indexing is controlled by a photoelectric sensor. The infeed conveyor can be easily adjusted for different product widths. Longitudinal sealing is achieved by a continuous side sealing unit. The height of the forming shoulder and the sealing units can be adjusted manually. Manufacturer: Kallfass GmbH Model: Shrink Tunnel Compact 650 S Year of manufacture: 2016 Dimensions: approx. 1850 x 1400 x 1450 mm (L x W x H) Weight: approx. net 580 kg / gross 630 kg Technical Data: Tunnel passage width: 650 mm Tunnel passage height: 200 mm fixed Length of heated tunnel hood: 1200 mm Working height: 800 - 900 mm Power connection: 400 V three-phase Energy consumption: approx. 6 kWh Rated current at 400 V: 21.0 A in standalone operation Compact and cost-effective shrink tunnel featuring a patented ring nozzle heating system with highly effective air volume control. Equipped with a steplessly adjustable plastic modular belt. This tunnel is particularly suitable for shrinking small to medium-sized products at medium output rates. Offer validity: 30 days, subject to prior sale Function guarantee, no warranty

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Fully automatic flow pack machine for packaging products—regardless of their length—in a full wrap with no film overlap. Product feeding is carried out via a conveyor belt, which simultaneously folds the product into a centre-folded film using a forming shoulder. Product indexing is controlled by a photoelectric sensor. The infeed conveyor can be easily adjusted to different product widths. Longitudinal sealing is accomplished by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully operational. Technical Specifications - Cross sealing bar: 450 mm - Film: centre-folded film, approx. 12 - 80μm - Film roll outer diameter: max. 400 mm - Film roll width: max. 600 mm - Min. product length: 120 mm - Min. product width: 80 mm - Passage height: 200 mm - Working height: 780 – 930 mm - Power supply: 400 V three-phase current, 50 Hz with protective earth - Rated power: 3.5 kVA - Rated current: 5.1 A Tunnel passage width: 650 mm Kedpfx Abow U A Eqe Hodr Tunnel passage height: 200 mm Viewing and demonstrations are possible at our premises by appointment. Functional guarantee, no warranty.

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 600 mm, total length: 1,200 mm, total height: 2,300 mm, overall weight: 150 kg, type of input current: three-phase, input voltage: 400 V, working range: 400 mm, product height (max.): 30 mm, warranty duration: 12 months, controller model: SPS-Steuerung Siemens Simatic HMI, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, positioning accuracy: 1 mm, Equipment: CE marking, documentation/manual, lighting, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany Kdodpfx Abeyycqxs Hsr • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Year of construction: 2014, operating hours: 100 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 129109, Zwick / Roell Z100 Universal Testing Machine 100 kN – Top Condition, Ready for Use with Extensive Accessories in a Tool Cabinet Kdsdpfxezunnvs Ab Hjr Description: Manufacturer: ZwickRoell GmbH & Co. KG Model: Z100 (Electromechanical Universal Testing Machine) Electronics: Test-Control Condition: Very good, little use (acquired as a refurbished machine in 2014) Availability: Immediate For sale is a highly precise and extremely reliable Zwick Z100 universal testing machine with a maximum testing force of 100 kN. The machine is in excellent condition, has been used very little in recent years, and is completely ready for use (Plug & Play). Extensive accessory package in a matching tool cabinet: The machine is offered as a complete, ready-to-use solution, including a well-stocked tool cabinet. Two clamping devices for flat specimens: Robust clamping jaw chuck designed for the full machine capacity up to 100 kN. Pneumatic clamping: Quick and gentle clamping up to a test load of 5 kN, ideal for standard-compliant testing of plastics. Mechanical accessories: Numerous specific test setups, devices, and mechanical equipment for standard-compliant material testing. Precise high-end measuring technology: The scope of delivery also includes a high-quality sensor package, consisting of an Epsilon extensometer (Type 3442-010M-100-ST) for indirect strain measurement, as well as a Heidenhain MT25 displacement sensor and an HBM MP55 measurement amplifier for direct strain measurement using strain gauges. These perfectly matched components guarantee seamless and calibratable signal acquisition according to strict testing standards. Scope of supply & System: Load frame Zwick Z100 (100 kN) with Test-Control electronics. Complete PC with Zwick testXpert II software installed under Windows 7 (operates completely independently and is immediately ready for use). Sturdy tool cabinet with the above-mentioned, sorted accessories. The machine can be inspected by prior arrangement. As this is a commercial sale, it is sold ex works without warranty or guarantee. The sale is preferably to a buyer who will collect the machine; disassembly and transport must be arranged by the buyer. Price: €29,500 (negotiable) plus VAT.

Condition: good (used), Fan model: HPB-F-040-300T Motor model: SKh90-2S2 Latest use: Air cushion table Ksdpfx Aboyz Tc Ie Hedr External dimensions: Width: 700 mm. Depth: 450 mm. Height: 450 mm. Weight: approx. 20 kg. Condition: good, second-hand

Condition: used, Year of construction: 2010, functionality: fully functional, Manufacturer: KALLFASS Model: UNIVERSA 500, year 2010 Model: Shrink Tunnel COMPACT 650 SO, year 2010 Kodpfxoxnzlho Ab Hsdr SPECIFICATIONS KALLFASS UNIVERSA 500 - fully-automatic side sealer Transverse seal bar, length: 500 mm Product clearance height: up to 200 mm Power supply: 208 - 480 volt Film, center-folded film: 12 - 80 μm Transport speed: 10 - 35 meter / minute Packaging capacity, max.: 85 cycles / minute Technical Data Compact 650 SO Tunnel clearance in width: 650 mm Tunnel clearance in height, adjustable: 100 - 400 mm Length of the heated tunnel hood: 1100 mm Air-flow regulation with patented ring nozzle system: standard Maintenance free plastic-mesh-belt: standard Transport speed infinitely variable, frequency controlled: approx. 10 – 35 m/min. Capacity of the tunnel blower infinitely variable, frequency controlled: standard Energy saving 2-stage heating with special insulation in tunnel hood: standard Temperature control by means of electronic thermostat: switching precision +/- 0.2° C Wear resistant and contactless temperature control: standard safety device according to EC regulation machines EN 60204: limit temperature control: standard Working height, adjustable: 800 - 900 mm Power supply: 400 Volts, 50 Hz, with protective earth conductor Heating capacity, installed, 2-stage switchable: 9.0 + 4.5 kW Rated capacity: 14.5 kVA Nominal current at 400 V: 21.0 amps Total connected load: max. 37.0 amps (incl. add. three phase power supply) Position of control cabinet and operating side: left hand side in working direction

Year of construction: 2014, condition: used, Automatic cutting machine for PVC profiles loadingtabel for 6500 mm lenght Kdsdjxb U N Hspfx Ab Hjr unloading table Labelprinter Sawblade diameter 500 mm cuttinge angles -45°/90°/+45°

Condition: used, mileage: 1,001 km, power: 17 kW (23.11 HP), gearing type: automatic, fuel type: diesel, color: orange, overall weight: 3,800 kg, axle configuration: 4x2, number of seats: 1, first registration: 01/1990, suspension: steel, Year of construction: 1990, operating hours: 3,486 h, front tire size: 205R14C, driver cabin: other, maximum speed: 20 km/h, Vehicle location: Bovenden, leaf spring suspension Ksdpfjyzi I Hex Ab Hjdr Superstructure: Bitumen/tar sprayer with Hatz diesel engine 2L31C, approx. 3486 operating hours! Accessory information provided without guarantee. Subject to changes, prior sale and errors!

Condition: used, Year of construction: 2008, Used Combiblock Sidel SBO 20 Universal 36000 bph The Used Sidel SBO 20 Universal Combiblock 36000 bph is an integrated bottling system, combining a blower and a filler/capper in a single unit. This machine is designed for the production of PET bottles, with a production capacity of up to 36,000 bottles per hour. The Sidel SBO 20 Universal blower features 20 cavities, allowing efficient and continuous production. The system includes a preform feeder with a hopper and a preform unscrambler, ensuring a constant flow of material in the production process. The Europa WM 60 filler/capper is integrated into the Combi block, optimizing space and reducing transfer times between the blowing and filling stages. This compact design improves operational efficiency and minimizes the risk of contamination. The system has been used for bottling natural mineral water in 0.5-liter formats, with a 26.6 mm Alaska-type neck customization. The machine pitch is 113 mm, adapting to specific production needs. Currently, the machine is in storage, ready to be installed and put into operation in a new production facility. A complete inspection is recommended before start-up to ensure optimal performance. The required power supply is 400 V at 50 Hz, standard in many industrial plants. The immediate availability of the Combi system represents an opportunity for companies looking to quickly increase their production capacity.   Advantages of the Combi system over a traditional system The Combi system, like the Used Sidel SBO 20 Universal Combiblock 36000 bph, offers numerous advantages over traditional systems, which use separate machines for blowing, filling, and capping. Firstly, the compact design drastically reduces the space occupied in the plant, allowing companies to optimize available space and, in many cases, reduce infrastructure costs. Kdedpfxsvgu D Sj Ab Hsr Moreover, the Combi system eliminates the need for intermediate conveyors and accumulation zones between stages. This layout simplification reduces maintenance costs, lowers the risk of jams or breakdowns along the production flow, and improves the overall line efficiency. The absence of intermediate steps also reduces the possibility of contamination, a priority especially in the food and beverage sector. The integrated process between blowing, filling, and capping shortens production times as the operations proceed continuously and without interruptions. This contributes to increasing the overall line speed and hourly production capacity. Higher efficiency translates not only into increased productivity but also into a significant reduction in energy consumption and operating costs. Additionally, the Combi system requires fewer personnel for line management and supervision, as a single control unit allows all operations to be monitored from a centralized interface. This simplifies operational procedures and makes quality control easier throughout the process.

Condition: used, Year of construction: 2023, operating hours: 152 h, JCB 403 COMPACT WHEEL LOADER / YARD LOADER with Folding Roof Year of manufacture: 2023 Engine power: Kubota 25 HP Operating weight: approx. 2,600 kg - Tires: 31 x 15.50 - 15 BKT, construction profile, wide - Standard lifting frame - 1 auxiliary circuit, manual control via joystick and additional lever (e.g. for 4-in-1 bucket) - 20 km/h version, axles with 100% differential lock front and rear - TÜV approval - Hydraulic quick coupler, Weidemann type - 3rd control circuit for hydraulic attachments - 2 halogen work lights at the front and 1 reversing light - 160 kg additional counterweight, original under rear axle - Includes pallet fork and standard bucket On request, we can provide you with a leasing or financing offer from JCB Finance. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale! Rental possible = More information = Kjdpfx Abjy Ivtce Hsdr Contact Tobias Ebert for further details.

Condition: new, Year of construction: 2025, ∗JCB 403 Plus New Machine∗ - JCB Diesel by Kohler [36kW/49HP] - No AdBlue required - Lift height: 2.77m - Rated load capacity: 1,800kg - Hydrostatic drive - 20km/h - Comfort cab (ROPS/FOPS) - Hydraulic quick coupler, Weidemann type - Auxiliary hydraulics - Roof protection grille - Adjustable steering wheel - Full-opening doors - Heating - Additional rear weight 123kg - Servo single-lever control - LED work lights front/rear - Yellow beacon - Exterior mirrors right/left - Grease gun - Right armrest Kdedpfx Abjyfr I Ns Hsr - Forks and bucket available Immediately ready for use, many other attachments in stock. A viewing appointment is expressly requested. Upon request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Mihm (Tel.) will be happy to assist you. More information is available on our homepage. Errors and prior sale excepted! Quick coupler system, road approval = More information = Please contact Tobias Ebert for further information.

Condition: good (used), functionality: fully functional, Brother S-7300A-403P Full Sewing machine station. Single Needle Direct Drive Lock Stitcher with Electronic Feeding System and Thread Trimmer. With Work Table and Spindles. World’s first Electronic Feed Control DigiFlex Feed digitalizes the feeding system and resolves various sewing troubles without adjustment work. Improvement in the reduction of needle breakage and productivity. Simple select and smooth sewing without material slippage. Excellent sewing quality that's easy to get proper thread tension in accordance with several materials. The Electronic Feed Control is directly connected to the stepping motor The horizontal feeding system is one of the first systems computerized for a single lock stitch sewing machine. The feed motion can be changed with one touch of a button to provide the best sewing quality for various materials. The sewing stitch length can also be digitalized, stabling the stitches. Compared to conventional mechanical control, the stepping motor control makes the response of reverse sewing quicker and reduces needle breakage. LED Light Equipped as Standard Both sides of the LED handy light are equipped for better operation, preventing shadows on the garment. The brightness can be adjusted on the panel. Kjdpfx Abjv U Ehqj Hjdr Good working condition. Please check out our other listings as well.

Condition: good (used), WEINIG UNIMAT 23EL 9 SPINDLE SHORT INFEED TABLE 1: BOTTOM 7,5KW 2: RIGHT 11 KW 3: LEFT 7,5 KW Kedpfeyahubex Ab Hodr 4: RIGHT 7.5 KW 5: TOP 11 KW 6: BOTTOM 7,5 KW 7: TOP 11 KW 8: BOTTOM 11 KW 9: UNIVERSAL 7,5 KW 360° TILTABLE 8000 RPM SPINDLES. FEED MOTOR 7.5 KW MAX FEED SPEED 44M/MIN 13 x DRIVEN TOP FEED ROLLERS 6 x DRIVEN BED FEED ROLLERS AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS PNEUM. POWERED HOLD DOWN ON 6+8 DIMENSION: APPR 5000 X 2000 X 1800 MM WEIGHT: APPR. 6500 KGS DUSTHOODS: 9 x 140 MM DIAMETER EXTRACTION MANIFOLD INCLUDED FULL DOCUMENTATION INCLUDED

Condition: used, Universal milling machine, console milling machine SIMPLON Type UN-S / Universa-Super Kodpfjifu Arox Ab Hodr Machine No.: 17220 Year of manufacture: 1979 Travel X: 900 mm, Y: 240 mm, Z: 400 mm Table size 1300 x 300 mm Tool holder SK 40 - M16 Spindle speed 50 - 1750 rpm, 16 steps Feed rate X, Y, Z axis 11 - 500 mm/min Rapid traverse 2400 mm/min Main spindle motor power 4 kW Connection voltage 380 Volt, 50 Hz - 3-axis digital display HEIDENHAIN, Type VRZ 750 (X-scale missing) - Main spindle drive via 16 gear stages - Clockwise and counterclockwise rotation of the milling spindle - Vertical milling head, swiveling +/- 90° - Overarm from the milling head, manually adjustable 700 mm - Side, manually extendable counter bearing mount with dovetail guide 450 mm - Mechanical tool clamping with tightening screw M16 - Coolant system in the machine base - Electrical control cabinet on the machine Space required L x W x H 1600 x 1850 x 1850 mm Weight 2400 kg Good condition

Condition: used, Year of construction: 2022, Electronic Double Head Cutting Saw – PERTICI 500TS / 500TS-22 Electronic double head cutting saw by PERTICI INDUSTRIES, designed for high-precision cutting of PVC and light alloy profiles. The machine is equipped with a fixed left head and a movable right head with automatic linear and angular positioning electronically controlled. Ideal for the professional production of windows and doors. Main features Automatic double head cutting saw Movable right head with automatic positioning Automatic head rotation: 90° / 45° (500TS) 90° / 22.5° (500TS/22) Programmable electronic control 15” TFT Touch Screen monitor USB and Ethernet ports Kdsdpsy Rl Syofx Ab Her Windows CE / Windows Embedded operating system Cutting list optimization Automatic profile height correction Possibility to work with one head only Full pneumatic safety guards Two-hand safety cutting control system Machinable materials PVC Plastic materials Light alloys / aluminium Cutting capacity Available lengths: 4,000 mm 5,000 mm 6,000 mm Maximum cutting length: up to 6,100 mm Blade Ø 500 mm (optional Ø 520 mm) Automatic cutting angles: 90° 45° 22.5° (TS/22 version) Technical data Number of blades: 2 Motor power: 4.4 kW each Blade speed: 2800 rpm Power supply: 400 V three-phase Air pressure: 6.5 – 8 bar Weight: approximately from 1670 to 1910 kg Blade peripheral speed: up to 76.2 m/s Equipment Horizontal and vertical pneumatic clamps Side roller supports Full cutting area safety protections Industrial label printer preparation 15” Touch screen on Windows platform Profile thickness probe (electronic profile thickness detection device) – photo no. 7 Central anti-bending profile support – photo no. 8

Condition: used, MIG MAG welding machine, gas-shielded welding unit CLOOS, type GLC 403 PA-TS Manufacturer's No. 8198, Year of manufacture 1994 Rated power 400 amps Power 400 amps - 60% duty cycle 310 amps - 100% duty cycle Adjustment range: stepless Connection hose package: 4.5 meters Mains connection: 380 volts, 50 Hz, 32 amp plug - 2-cycle and 4-cycle welding unit - External wire feeder, type CK 72/5TSZK with 2-roller drive and 4.5-meter hose package - 4-meter hose package with central connection and EHRIG hand torch, type Senator-800-D - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Kodpfjzugnzsx Ab Hodr Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 300 kg Good condition

Condition: good (used), Year of construction: 2000, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, saw blade diameter: 500 mm, Double mitre saw Pertici 500F2K, capable of double cuts, saw blade diameter 500 mm, Kdedpfxozfmkwo Ab Hjr positioning via machine control, horizontal and vertical clamping units, seal holder.

Condition: good (used), Feutron Temperature Test Chamber: -40 to +100°C Thanks to its robust construction, the Feutron TPK 3403/125 is a workhorse for standardized temperature testing. The primary areas of application for this model are: 1. Electronics and Component Testing This is the most common area of ​​application. It focuses on how components react to extreme temperatures: Functional Testing: Does the circuit board continue to operate flawlessly even at -40°C or +150°C? Burn-In Testing: Artificial aging of components through continuous operation at high temperatures to induce early-stage failures. 2. Materials Testing Investigation of physical changes in materials: Brittleness: Do plastics or rubber seals become brittle in cold conditions? Deformation: Do composite materials warp when exposed to heat? Storage Testing: How stably do chemical substances or adhesives behave over extended periods at a constant temperature? 3. Quality Assurance (QA) Sample Testing: In-process testing conducted alongside production to ensure that manufacturing output adheres to specified temperature ranges. Standards Compliance Testing: Conducting tests in accordance with common industry standards (e.g., DIN EN 60068) that prescribe specific temperature profiles. 4. Research & Development Prototyping: Testing new housing designs or materials under controlled thermal conditions prior to mass production. Manufacturer: Feutron Model: TPK 3403/125 Temperature Range: -40 to +100°C Refrigeration System: Air-cooled condenser Temperature Stability: approx. ±0.1 to ±0.5 K Usable Chamber Volume: approx. 125 liters Refrigerant: R22 Operating Pressure: 23 bar Power Supply: 220/280V-3-50Hz Input Fuse Rating: 25 A Protection Class: IP 20 Weight: 480 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Kdodpfoy Nynaox Ab Her You can find additional items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, Digitale Etikettendruckmaschine SurePress mit Tintenstrahltechnologie / Digital Label Press with Inkjet Technology Digitale Etikettendruckmaschine / Digital Label Press Epson Sure Press L-4033AW Baujahr / Year 2016 - Serial-No. RXH0000088 Maximale Druckauflösung / Maximum Print Resolution: Papier / Paper 720 x 720dpi Film 1440 x 720dpi Rollbedruckstoff Durchmesser max. 100mm Druckgeschwindigkeit / Print Speed: Bis zu 5 m (16') pro Minute bei 720 x 720 dpi (auf Papier) / Up to 16' (5m) per minute at 720 x 720 dpi (on paper) Kdodpfjyx Ar Hox Ab Hjr Die Epson SurePress L-4033AW ist eine industrielle Inkjet-Digitaletikettendruckmaschine, die speziell für den Etikettendruck in hoher Qualität konzipiert wurde.  Besonderheit, das weiße Tintenset (AW = Auto White) ermöglicht den Druck auf transparenten Filmen und metallischen Substraten. The Epson digital label press capitalizes on Epson's acclaimed MicroPiezo® ink jet technology to create output with smooth gradations and incredible color quality. The L-4033A has six-color (Cyan, Magenta, Yellow, Black, Orange and Green), industrial-quality, water-based ink set produces a remarkable range of colors for impressive, professional and consistent results.  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: as good as new (ex-display), Year of construction: 2008, I sell the fourside moulder Futura P-MAX 23/5+UNIV, year 2008. Showroom machine, worked only a few hours before ! 6 Spindles: down - right - left - top - down - universal Electronic programmer for working the height adjustment of the pressure zone and top spinde, aka working height. Element max. 230x170mm ! Alle 6 Spindels 6000 rpm. Material pressures for short elements. Total weight 2500kg. Kdodshcfizjpfx Ab Hor 1-zone pneumatic pressure system for feeding wheels. Fully working. Available immediately Showroom machine, worked only a few hours before !

Condition: new, Year of construction: 2020, End Milling Machine – Pertici ML200A - Brand new – Year 2020 The ML200 by Pertici Industries is an automatic vertical-axis end milling machine designed for processing aluminium and PVC profiles. The machine allows machining operations with angles from 90° to 22.5° and from 90° to 157.5°, ensuring precision and reliability during end milling operations. Heavy-duty electro-welded steel structure with high-rigidity cast iron bench, complete with sliding milling unit on precision-ground guide rods. Equipped with: Quick pneumatic cutter change system Lubrication system 5 pneumatic clamping cylinders Three-phase motor 1.4 / 1.9 kW – 1400 / 2800 rpm Oil-pneumatic feed system for the milling unit Adjustable feed speed Profile support with vertical and horizontal clamps Kedjy N S Ulepfx Ab Hodr Anti-vibration feet User and maintenance manual Ideal machine for professional aluminium and PVC window and door manufacturing. Technical specifications: Motor power: 1.4 / 1.9 kW Power supply: 400V – 50Hz – Three-phase Motor speed: 6700 / 3350 rpm Maximum tool diameter: Ø 250 mm Tool bore: Ø 32 mm Maximum profile height: 130 mm Maximum profile width: 350 mm Maximum machining height: 145 mm Required air pressure: 6 – 7 bar Air consumption: 30 L/min Machine dimensions: Length (a): 1020 mm Height (b): 1700 mm Depth (c): 1410 mm Weight: 310 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 19142, roller (bottom) diameter: 140 mm, roller (top) diameter: 120 mm, working width: 1,250 mm, sheet thickness (max.): 6 mm, TECHNICAL DETAILS Max. sheet thickness: 6 mm Max. pre-bending thickness: 4 mm Max. working width: 1,250 mm Number of rollers: 4 pcs. Number of driven rollers: 2 pcs. Diameter of upper roller: 120 mm Diameter of lower rollers: 140 mm MACHINE DETAILS Control system: CNC Drive: Hydraulic Power: 4 kW Dimensions & Weight Unladen weight: 1,450 kg Dimensions (L x W x H): 2,700 x 1,450 x 1,500 mm Kodpszuwwajfx Ab Hedr Transport weight: 1,450 kg Number of transport packages: 1 pc. EQUIPMENT CE marking Documentation

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. Kjdpjzcf Dlefx Ab Hjdr First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: used, Year of construction: 2009, operating hours: 73,000 h, functionality: fully functional, power: 75 kW (101.97 HP), pressure (min.): 4 bar, pressure (max.): 10 bar, ambient temperature (max.): 46 °C, type of cooling: air, Equipment: documentation/manual, type plate available, Product description: GA75P A 10 APB 400 50 Product number: 00000402 | 8152811462 Date of manufacture: 09/30/2009 Model: GA75_08 Product description: GA 75 Brand: Atlas Copco Cooling: Air-cooled (AIR) Electrical approval: IEC (IEC) Energy recovery: Yes (Y) Frequency: 50 Hz (50HZ) Model variant: Workplace (W) Pressure Vessel Approval: CE / ASME (CEASME) Regulation: Elektronikon Graphic (MK5GRAPH) Starter type: Star/Delta (Y/D) (YD) Supply voltage: 400 V (400V) Working pressure: 10 bar (10BAR) Ex works with integrated heat recovery. Current operating hours: approx. 73,000 hours Used machine, sold as is, without warranty. Kodpjzvqp Sofx Ab Hsdr