Used Pneumatic Gripper Feed for sale (18,713)

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used BRANDT KD 68 CF Optimat edge banding machine from 2001. The machine is equipped with several processing units for complete edge processing. Among other things, it features pre-milling units, trimming units, radius milling cutters, corner copying devices, and pull knives for radius and surface finishing. Technical data / Equipment Manufacturer: BRANDT Fpsdpfxjzxy Nye Aatjl Type: KD 68 CF Optimat Year of manufacture: 2001 Machine no.: 0-261-02-8154 Control system: BRANDT NC 9 Feed speed: approx. 11 m/min Edge thickness: up to approx. 40 mm Voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Equipment: BRANDT NC 9 control system Pre-milling Trimming units Radius milling Corner copying Pull knives for radius processing Surface pull knife pneumatically controlled units Roller magazine / edge feeder Workpiece transport via feed chain Dust extraction connections on the processing units Central control via control panel Emergency stop The machine is currently still at the customer's site but would be immediately available! Transport is possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) Fpedeztl Scjpfx Aatol - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: HG-1020-5571, The machine shown is a HEBÖ RBV-12SV pipe drilling machine with extensive accessories. The machine is designed for the processing of pipes and profiles and is used as a semi-automatic pipe drilling machine. According to the manufacturer, it is suitable for applications in, among other things, railing construction, shelving system construction, and the furniture industry. The processing can include drilling, reaming, core drilling, and thread forming. The RBV-12SV has an automated processing sequence after manual clamping of the workpiece. Technical specifications according to the data plate of the machine shown: Manufacturer: hebö Maschinenfabrik GmbH Machine type: RBV-12SV Machine number: HG-1020-5571 Year of manufacture: 2020 Voltage: 400 V Frequency: 50 Hz Power: 5 kW Current: 11.5 A Weight: 555 kg The manufacturer's specifications for the RBV-12SV also include a speed range of 0–2,250 rpm and a feed rate of the drilling unit of 0–300 mm/min. Depending on the model, pipes up to 3" or 88.9 mm, square profiles up to 80 × 80 mm, and other profile shapes can be processed. Fpjdpfxozypgdj Aatsl Optional: with mounted pneumatic/manual thread drilling device CMA LCN 12 with compressed air drilling unit (yellow attachment).

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, total length: 3,200 mm, For sale: a new CIDAN RAPIDO 32 electric guillotine from our showroom. The machine has not been used in production and is connected and fully ready for operation. It can be viewed in person, tested, and trial cuts can be performed. Fpsdpszz Rqtsfx Aatel The machine is in stock – fast delivery is possible. The CIDAN RAPIDO is a fast and reliable electric guillotine designed for precise sheet metal cutting. The machine can perform up to 35 cuts per minute, making it ideal for both individual jobs and intensive series production. The drive system with eccentrics, the material clamping system, and the sheet support elements mounted close to the blades allow for convenient and precise cutting, even of narrow strips. The guillotine has angular supports on both sides of the front table, ensuring accurate sheet feeding at a 90° angle. LED lighting in the cutting area allows the operator to clearly see the cutting line. Key information: Manufacturer: CIDAN Machinery Model: RAPIDO 32 Condition: New / showroom machine Working length: 3200 mm Max. steel thickness: 2.5 mm Max. stainless steel thickness: 1.6 mm Max. aluminum thickness: 3.7 mm Cutting speed: up to 35 cuts/min. Weight: approx. 2100 kg CUTLINK control and automatic back gauge The guillotine is equipped with the CIDAN CUTLINK control system – a fast and easy-to-use program that allows up to 10 different operations to be programmed simultaneously. After the operator enters the required dimensions, the 750 mm automatic back gauge automatically adjusts to the required position, allowing for quick and accurate cutting of different widths. Sheet support and return The pneumatically controlled sheet support system allows for control of the material during cutting. After cutting, the cut sheet is directed to the front material trolley, so the operator does not need to collect parts behind the machine. The trolley can be easily removed and transported, and also picked up with a forklift. Additional equipment included with this machine: Telescopic extension of the front table up to 800 mm from the cutting line – for easier positioning and support of large sheets. Material trolley – for collecting cut sheets and convenient transport to bending or other machines. LED cutting area lighting. Automatic 750 mm back gauge. CUTLINK control system. Ideally suited for sheet metal processing, roofing and facade manufacturing, ventilation, and other sheet metal processing companies. The machine is located in our showroom, connected, and ready for demonstration. Fast delivery is possible. If you have any further questions, please do not hesitate to ask.

Condition: excellent (used), Bandsaw with feed MEBER SR - after the technical review - in good condition - Italian production TECHNICAL PARAMETERS: 4 kW main engine wheel diameter 800 mm cutting height 420 mm maximum width of the cut material 780 mm cutting width at the ruler of 575 mm cutting width with rolls 195 mm Fodofwl Uaepfx Aatjpl maximum width of the material cut with a feed 355 mm cutting band width max 40 mm feed speed adjustable on the inverter feed speed range 0-12.5 m / min height of the feed roller 140 mm pneumatic feed pressure upper and lower belt guides 0.75 kW feed motor stub diameter 100 mm dimensions (length / width / height) 260 x 165 x 115 cm weight 700 kg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 001, We offer for sale a custom-built automatic cutting machine AMT Plus PVA, designed for high-volume production of short wooden components from pre-machined timber profiles and square sections. The machine automatically feeds, positions, clamps and cuts workpieces according to preset dimensions, ensuring high productivity and repeatability. Technical Specifications Manufacturer: AMT Plus s.r.o. Model: PVA Year of manufacture: 2018 Workpiece dimensions: Min.: 12 × 40 × 300 mm Max.: 70 × 160 × 800 mm Installed power: 40 kVA Power supply: 400 V / 50 Hz Air pressure: 0.6 MPa Air consumption: approx. 4.5 m³/h Features Servo-controlled positioning system Frequency-controlled saw drive Pneumatic clamping Multi-blade cutting unit Integrated waste conveyor Fully enclosed safety guarding with dust extraction connections Dimensions Approx. 3500 × 1320 × 2140 mm Condition Fully functional Good technical condition Available for inspection and testing Applications Ideal for the production of: furniture components hardwood blocks flooring elements window and door components other precision-cut wooden parts Sale Terms Available immediately Dismantling and transport to be arranged by the buyer Fpjdpfx Aaezyrdljtjl Custom-built machine originally developed for accurate cutting of short wooden components in serial production.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,328 h, functionality: fully functional, machine/vehicle number: 11180000573, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,250 mm Travel range Y-axis: 880 mm Travel range Z-axis: 800 mm C-axis indexing: 360° (0.001°) Feed rate: 40 m/min Rapid traverse: 40 m/min Number of pallets: 1 Pallet dimensions, diameter: 1,000 mm Fodpfxszxf Ine Aatepl Max. workpiece weight: 1,000 kg Max. torque: 7,900 Nm Max. spindle speed: 18,000 rpm Spindle drive power: 15 kW at 40% duty cycle Spindle drive power: 10 kW in continuous operation Tool interface: CAT 40 Number of tool positions in the magazine: 60 Tool changer: Double gripper MACHINE DETAILS CNC control: 3D contouring control MillPlus Total power consumption: 55 kVA Coolant tank capacity: 600 l Dimensions (L x W x H): 7,000 x 3,500 x 3,902 mm Operating hours Hours under power: 33,831 h Spindle operating time: 6,328 h EQUIPMENT Electronic handwheel Chip conveyor Internal coolant supply Rotating viewing windows Flushing gun Preparation for Renishaw probe Accuracy package Preparation for internal cooling with 40/80 bar Paper band filter

Condition: like new (used), Year of construction: 2021, machine/vehicle number: see PDF files, FANUC CRX-10iA/L collaborative robot (cobot) – 10 kg / 1418 mm – 05/2021 – first owner, very low use – incl. vacuum gripper + CE base Description: For sale: FANUC CRX-10iA/L collaborative robot (cobot), build date 05/2021, payload 10 kg and reach 1418 mm. From first owner and hardly used. The robot was purchased for a specific application/project, but the concept did not work as intended; therefore the installation was taken out of service and stored in 2021/2022. Including vacuum gripper beam with multiple suction cups as pictured, mounted on a CE-marked base built by Machinefabriek van de Weert (Helmond, NL). Robot specifications: * Make / model: FANUC CRX-10iA/L * Build date: 05/2021 * Payload: 10 kg * Reach: 1418 mm * Robot weight: 40 kg * Type / part no.: A05B-1702-B202 * Serial no.: R2150086C * Software: standard/basic configuration (no upgrades known) Base / installation (integrator): * Built by: Machinefabriek van de Weert – Helmond b.v. (CE) * Year of building: 2021 * Power supply: 230V / 50Hz * Compressed air: 6 bar * Base weight: approx. 150 kg Included: * FANUC CRX-10iA/L robot on base * Vacuum gripper / suction cup beam (as shown) * Cabling / pneumatics as installed * Control/electrics integrated in the system / complete as installed Condition: * Very low use, stored since 2021/2022 * Cosmetic dust/storage marks visible (see photos) * Inspection possible at our warehouse Location & delivery: * Location: Son (near Eindhoven), The Netherlands * Loading available Fodezq Tzajpfx Aatopl Fixed quick-sale price: € 27,500.- excl. VAT, ex works Son (NL) Contact: Walther van Rooij – Machinehandel van Rooij BV (The Netherlands) Mobile/WhatsApp: E-mail:

Condition: ready for operation (used), functionality: fully functional, On offer: Wood aging/brushing/polishing machine, 400 mm – 2 heads The machine is used, has undergone technical inspection, is fully functional, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. The machine's greatest advantage is its two independently adjustable brushing units, each with its own inverter allowing for speed and rotation direction adjustment. Combined with the smoothly adjustable feed rate, this allows for adjusting the intensity of the processing according to the type of material and achieving various wood finishing effects – from aging, brushing, and texturing the surface to smoothing and polishing elements. Specifications: • Machine type: wood aging/brushing/polishing machine • Working width: 400 mm • Number of brushes: 2 pcs • Maximum working height: 65 mm • Spindle length: 460 mm • Spindle diameter: 35 mm • Pneumatic roller pressure • Brush motor power: 2 × 0.75 kW • Option to install larger motors – additional cost Fsdpfx Aaszmhkzjtspl • Conveyor speed smoothly adjustable in the range of 2–25 m/min • Each brush controlled by an inverter, with the ability to adjust the direction and speed of rotation • Independently adjustable height of the brushing units • Machine equipped with brushes with grit 120 and 180 • Overall dimensions: 400 × 110 × 160 cm (L × W × H) Additional information: • Machine inspected and prepared for operation • Photos show the actual condition of the machine offered • Free training on machine operation at our company's premises • The price stated in the auction does not include VAT Financing and transport: • We organize transport using the MDD fleet, courier companies, or external carriers • We assist in obtaining leasing or a lease loan • Delivery costs depend on the destination and the method of transporting the machine

Condition: like new (used), Year of construction: 2013, functionality: fully functional, overall weight: 500 kg, MAKOR TF/P PLUS coating machine 19.06.6512 TYPE TF/P Plus Max. working width 150 mm Max. height 120 mm Adjustable feed rate max. 140 m/min Upper pressure rollers with drive x 6 Pressure force adjustment via pneumatics Lower pressure rollers with drive x 6 CE marking Year of manufacture 2013 Product description: - Paint without waste - Robust and efficient transport with 6 motor-driven pressure units. - Various application heads guarantee results, even for filling and defect repair products. Designed for continuous application of coating, gesso, and paint on strips, picture frames, and profiles with an extrusion system, using a correspondingly shaped steel counter-template. Construction made of steel sheet and tubular steel. Guaranteed forward movement via no. 6 lower metal rollers and no. 6 upper rubber pressure wheels, variable with adjustable speed via an inverter. The upper pressure wheels are mounted on freewheel bearings to reduce uneven wear. Pneumatic distribution panel equipped with a selector for engaging the upper pressure wheels and corresponding independent pressure regulators. OPTION TO PURCHASE THE FOLLOWING MACHINES AT INDIVIDUAL PRICES: 1. Profiling machine for grinding wheels and silicone wheels from the Italian company MAKOR, price €1,500 - Year of manufacture: 2003 - Serial number: 5933 - Diameter of profiled wheel: 160 - 200 mm - Diameter of profiling disc: 180 - 200 mm - Weight: 280 kg 2. MAKOR ST/100 film slitting machine, price €1,200 3. MAKOR TEP 3000 conveyor belt, price €700 Fjdsytc Rkspfx Aatopl

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Very well-maintained and robust Heesemann MFA 8 wide-belt sanding machine for professional use. This machine is particularly suitable for surface, fine, and finish sanding and features electronic control as well as cross and longitudinal sanding units. The machine is in very good used condition. Technical data: Manufacturer: Heesemann Type: MFA 8 Fjdpfx Aszxyfhsatepl Year of manufacture: 1994 Machine number: 9411252 Working width: approx. 980 mm Feed width: 1300 mm Voltage: 400 V Frequency: 50 Hz Total connected power: approx. 50 kW Rated current: 100 A Sanding belt dimensions: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Constant working height Electronic control Cross-belt unit Longitudinal sanding unit Brush units Suitable for finish, fine, and surface sanding Weight: approx. 4,000 kg Equipment: Electronic control panel Pneumatic unit adjustment Feed carpet Dust extraction connections CE marking Transportation possible for an additional charge! The machine is currently still at the customer's site but would be immediately available! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: A80722MM2, grinding width: 1,350 mm, power: 31 kW (42.15 HP), height adjustment type: electric, Automatic leveling wide belt sander suitable for fine sanding of solid wood. This sander belongs to the top range of automatic wide belt sanders and stands out, in particular, for its small machine size, perfect sanding quality, ease of operation, and high reliability. It was used for final sanding of solid parquet. 2 main units: soft sanding cylinders, 1350 mm Additional units: Scotch-Brite brush, cleaning brush, cleaning air blowers Total maximum power consumption: 31 kW Sanding width: 1350 mm Max. workpiece height: 160 mm Constant working height of the machine – suitable for integration into a production line Motorized adjustment of working thickness with LCD display Continuously adjustable feed rate of the conveyor belt Continuously adjustable speed of both working units Pneumatic blowers for the working units Ammeter for monitoring motor load Remote shutdown of units from the control panel Stop with 4 positions for compensating for belt grit Perforated conveyor belt with the option of vacuuming up parts Roller extension of the table at the input and output Pneumatic oscillation, electronically controlled CE safety standard Weight: 3800 kg Year of manufacture: 2008 Damage to the first sanding cylinder – see photo Negotiable price: 25,000 EUR (excluding VAT) The machine is fully functional and sold in its current condition. In stock in Telnice, near Brno – Czech Republic Testing, demonstration, and operator training are included. Fpodpfx Aey Idxysatol

Condition: refurbished (used), Year of construction: 1975, functionality: fully functional, CANALI Vertical Automatic High-Performance Block Bandsaw Model BBS.V "PACIFIC" K/L-B-P 1800, Type 555, Year 1975 with control panel in the cabin, Bandsaw wheels Ø 1800 mm, bandsaw wheel width 280 mm, Max. saw blade width 310 mm, bandsaw blade length 11,500 mm Log feeding system, approx. 20 m long, four-strand with inserter Block carriage with ejector onto block cross conveyor CANALI pneumatic clamping carriage, Type 501.09 with 4 clamping jaws, 3 log turners, 4 ejectors, Fjdpoxvrnijfx Aatjpl Drive power 100 kW, carriage speed 5-120 m/min. Powered roller bed with slab extraction with brush, lifter with puller for end trimming Electrical switchgear cabinets complete Complete sharpening room equipment for bandsaw blades

Condition: used, functionality: fully functional, SCM 900 RT Wide Belt Sander Fpedpfoyy Ngyex Aatel Specification: • Condition - used, after a comprehensive inspection, calibration, and replacement of all seals • Manufacturer - SCM • Model - 900 RT • Working width - 900 mm • Maximum working height - 160 mm • 1 combination sanding unit (hard roller with 200 mm diameter + sanding pad) • Main motor power - 7.5 kW • 2 machine feed speeds • 2 conveyor speeds • Analog thickness indicator for the workpiece • Pneumatic oscillation • Abrasive belt size - 2300 x 900 mm • Weight approx. 1200 kg • Overall dimensions: 185 x 155 x 210 cm (L x W x H) Additional Information: • The machine is in good technical condition and ready for immediate use • The photos shown reflect the actual condition of the sale item • Possibility to switch on and inspect the machine on site • The auction price does not include VAT or transport costs Financing and Transport: • We organize transport using the MDD fleet, courier companies or external carriers • We offer financing support in the form of leasing or lease-loan

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 4480, total length: 14,500 mm, total width: 7,800 mm, total height: 3,500 mm, overall weight: 20,000 kg, Reichenbacher Machining Center VISION III-TT-L – 5-Axis, 3-Axis, MBG8, 5x SNA Equipment: 5-Axis Unit with Cardanically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Fpedpfx Aasywzq Sstol Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Driven by frequency inverter Maintenance-free Water-cooled Hybrid bearings Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 3-Axis Unit with Vertically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Driven by frequency inverter Maintenance-free Water-cooled Hybrid bearings Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 8-Spindle Drilling Unit (1 unit): L-Shape, Grotefeld Drill spindles: individually selectable Rotation direction: clockwise/counterclockwise Pitch: 32 mm Power: 2.5 kW Speed: 5,000 rpm fixed Z-axis stroke: +75 mm Holder: D = 10 mm H7 Plunge stroke: 80 mm Grooving Unit (5 units): GROTEFELD Angle Saw Unit F100-S The working/milling stroke is pneumatic. Drive: three-phase motor with multi-ribbed belt LEFT version Drive rotation direction: clockwise/counterclockwise Speed reduction: 1:2.86 – belt drive Power: 2.20 kW – 220-240/380-415 V – 50 Hz Speed: n1 = 2,800 rpm, n2 = 8,011 rpm at 50 Hz Spindle power: 2.2 kW Feed: 150 mm Tool holder: Ø30 x 1.5 mm – 5.0 mm Tool holder rotation: opposite to drive rotation direction Feed force: 2565 N Underfloor Drilling Unit in Machine Bed (1 unit): GROTEFELD Angle Milling Head G06-1.1-P The working/drilling stroke is pneumatic. Drive motor: 1.1 kW 220-240/380-415 V 50-100 Hz Drive rotation direction: clockwise Speed reduction: 1:1.55 gear drive Drive speed: 2,800 – 5,600 rpm Tool spindle speed: 4,340 – 8,680 rpm Tool holder: 1x HI-Q/ERM25 DIN6499-C (8°) For ER25 collet DIN 6499-B Ø0.5–16 mm max. Tool holder rotation direction: clockwise Flange clamping piece: FK45 Feed slide: with pneumatic cylinder and double steel guideways Feed: 80 mm

Condition: excellent (used), CATALOGUE NUMBER: 5799 TECHNICAL DATA - Max. width of workpiece: 230mm - Max. height of workpiece: 140mm - Min. length of workpiece: 300mm - 2 sanding units: - Upper and lower + platens * Upper: - 2 sliding, metal pressure rollers - Pressure - Sanding unit: 2 metal rollers + platen - Sliding pressure roller - Conveyor belt * Lower: - Conveyor belt - 2 sliding, smooth metal rollers - Pressure - Sanding unit: 2 metal rollers + platen - 3 sliding, smooth metal rollers - Electrically adjustable sanding height - Oscillation of sanding belts - Pneumatic belt cleaning - Smooth feed rate adjustment using a frequency inverter: 3-15 m/min - Feed motors: 2 x 0.37 kW Fjdszty Nvepfx Aatjpl - Main motors: - Upper: 5.5 kW - Lower: approx. 5.5 kW - Air consumption: 6-8 bar - Diameter of dust extraction nozzles: 4 x 100mm - Overall dimensions (L/W/H): 2340 x 1420 x 1920 mm - Weight: 1480 kg - For short components (belts overlap) - German manufacture - Very good condition - Unpainted - Used sander Net price: 18900 PLN Net price: 4500 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (Price may change in the event of significant exchange rate fluctuations)

Condition: used, Year of construction: 1997, functionality: fully functional, Wide Belt Sander TORNADO 300 Specification: • Condition – used, after a comprehensive inspection • Manufacturer – TORNADO • Model – euro 300 Fpjdpfx Asy Divijatel • Working width – 300 mm • Max working height – 200 mm • 1 combination sanding unit (hard rubber roller + pad) • Main motor power – 4.0 kW • 1 feed speed • 1 conveyor speed • Electric up/down adjustment • Analog thickness gauge • Pneumatic belt oscillation and tensioning • Abrasive belt size – 1900 x 300 mm • Extraction port – 150 mm • Weight – 860 kg • Year of manufacture – 1997 • Overall dimensions – 150 x 100 x 190 cm (L x W x H) Additional information: • The machine is in very good technical condition, ready for immediate use • The photos show the actual condition of the item for sale • Possibility to power up and test the machine on site • Free operator training at the company premises • The listed price does not include VAT or transport costs Financing and transport: • We organize transport via MDD fleet, courier companies, or external carriers • Financing options available in the form of leasing or a lease loan

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 6151740170, Exhibit: Chicago Pneumatic Air Chisel Hammer GV 5 Strokes per minute: 2400 Stroke: 52.5 mm Fsdpfx Aasxwpitjtepl Chisel shank: Hexagonal 19 mm Air consumption under load: 8.3 l/s Power: 12.2 Joules Weight: 5.1 kg Overall length: 385 mm Air inlet: G 1/2 Specifically designed for heavy-duty industrial applications, the GV5 hammer combines powerful blows and an efficient impact frequency with a robust design. Thanks to its metal housing, large stroke volume, and high impact rate, the GV5 offers maximum performance and durability simultaneously. It is therefore ideal for roughening, chiseling, or cutting tasks.

Condition: used, functionality: fully functional, On offer: SAC RTE 1000 wide belt sander, with pressure shoe The machine is used, has undergone technical inspection, is fully functional, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. The machine's greatest advantage is its ability to calibrate and precisely finish-sand. The unit with a hard rubber roller is responsible for leveling the surface, and the pneumatic pressure shoe with a "creep feed" function allows for precise finishing of the component. The two-speed motor and two conveyor speeds allow the operating parameters to be adjusted to the material being processed. Specifications: • Manufacturer: SAC • Model: RTE 1000 • Working width: 1000 mm • Maximum height of the workpiece: 165 mm • Number of sanding units: 2 • One combined unit: hard rubber roller, 160 mm diameter + pressure shoe • Pneumatic pressure shoe with "creep feed" function • Main two-speed motor: 10 / 12 kW • Number of conveyor speeds: 2 • Electric adjustment of the work table height • Abrasive belt blowing system • Abrasive belt dimensions: 1900 × 1000 mm • Dust extraction port: Ø200 mm • Overall dimensions: 145 × 210 × 190 cm (L × W × H, without the guard) Fsdpfx Aozvuy Ijatopl Applications: • Calibrating and leveling solid wood components • Sanding panels and glued components • Inter-operation sanding • Precise finishing sanding using the pressure shoe • Processing components with a width of up to 1000 mm and a height of up to 165 mm • Preparing surfaces for lacquering, oiling, or further processing Additional information: • The photos show the actual condition of the machine being offered • Free machine operation training at our company's premises • The price stated in the auction applies to export/intra-community sales with a VAT rate of 0%; for domestic sales, 23% VAT will be added. Financing and transport: • We arrange transport with our MDD fleet or through external carriers • We assist in obtaining a lease or leasing loan • The delivery cost depends on the destination and the method of transporting the machine.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 92805, Planer profiling milling machine WEINIG Profimat 26 Super Fedpfxsynl N Sj Aatspl Working width 20 - 230 mm Working height 8 - 120 mm 5 working spindles Ø 40 mm Long infeed table (approx. 2000 mm) Bottom working spindle 5,5 kW / left + right 5.5 kW / top 5.5 kW / bottom finishing 5.5 kW Spindle speed 6000 rpm Pneumatic pressure of feed rollers Cardan feed infinitely variable 5 - 24 m/min lubricant pump mechanical digital displays Year of manufacture 2001 Dimensions 3400 x 1800 x 1900 mm (L x W x H), weight 2500 kg

Condition: like new (used), Year of construction: 2020, operating hours: 9,000 h, functionality: fully functional, MG MORI DMC 1150 V Year of manufacture: 2020 Machine type: CNC vertical machining center Travel distances X-axis: 1,150 mm Y-axis: 700 mm Z-axis: 550 mm Rapid traverse: 42 m/min Direct linear scales in X / Y / Z Work table Table size: 1,460 × 750 mm CNC control HEIDENHAIN TNC 640 3D control DMG MORI ERGOline Control 19" screen Main spindle DMG MORI speedMASTER Tool interface: HSK-A63 Speed range: 20–20,000 rpm Spindle power: 35 kW / 25 kW Torque: 130 Nm / 86 Nm Values specified at 40 % / 100 % duty cycle Active spindle cooling Tool magazine 60 tool positions HSK-A63 Chain magazine Carousel Dual gripper Direct manual tool loading into the magazine Coolant / MQL Internal coolant supply Coolant through the spindle MQL 40 bar Paper band filter Tank capacity: 600 liters Chip conveyor Machine bed flushing Extended machine bed flushing Additional flushing bar on the right side wall Flushing volume manually adjustable Flushing gun for chip removal Enclosure roof Workpiece measurement technology Infrared measuring probe HEIDENHAIN TS 460 Automation DMG MORI PH 150 Pallet loading and unloading system Handling system with pallet magazine Round magazine 2 servo axes: X-axis Magazine table Z-axis pneumatic Gripping arm / fork IPC with touch panel DMG Automation Jobmanager OMRON package Graphically supported operator guidance PROFIBUS interface Automatic loading door on the right side of the machine PROFIBUS communication during the loading cycle 2-channel safety circuits Electrical automation interface version 4.0 4-color signal light Pallet system PH 150 basic round magazine: 10-position System expanded to pallet size: 500 × 500 mm In this configuration: max. 4 pallet storage locations Handling weight expanded to max. 250 kg per pallet incl. load EROWA zero-point clamping system EROWA UPC pneumatic zero-point clamping system Connection coupling on the table 2 active pneumatic lines Pneumatic release via 6 bar system pressure Pressure increase to 7.5 bar EROWA MTS clamping system Zero-point clamping station EROWA MTS Adapter plate: 410 × 410 mm 4 clamping elements Pitch: 250 × 250 mm Pallets 4 × EROWA MTS pallets Fpsdpszzm Dpjfx Aatjl Pallet size: 498 × 498 mm Pitch: 250 mm Incl. clamping studs and coupling Surface smooth Material: Aluminum The complete photo gallery is provided exclusively upon request. A sale to dealers is currently not possible. The complete order confirmation via DMG MORI will also be sent to you upon request.

Condition: good (used), Year of construction: 2008, functionality: fully functional, The Depo/ZPS machining center features an overhead gantry, meaning that all machine movements are performed by the tool. As a result, the mass of the workpiece and clamping device remains constant during machining. Year of manufacture: 2008 Spindle hours approx. 3,500 h (after spindle replacement in 2023) Control system: - Heidenhain iTNC 530 - Heidenhain HR 410 handwheel - Swiveling control panel with 15.1" monitor - Integrated Ethernet interface Technical Data Travel ranges: X 1,000 mm, Y 900 mm, Z 600 mm Work table: - 1,200 mm x 1,000 mm - Max. workpiece weight: 3,000 kg - Max. workpiece size: 1,000 mm x 800 mm x 700 mm Milling spindle: - Continuous power: 30 kW - Speed range: 1-18,000 rpm - Torque S1/100%: 80 Nm - Tool holder: HSK 63 form A - Main spindle jacket cooling - Air through spindle center for tool cooling (ILZ) - Coolant with 40 bar through the spindle (IKZ) Fedpfx Aey Hp Rrsatjpl Axes feed rates: - X, Y, Z axis feed up to 40 m/min - X, Y, Z axis rapid traverse up to 40 m/min Tool changer with double-arm gripper: - Number of tools in drum magazine (outside working area): 38 - Max. tool diameter: 80/115 mm - Max. tool length: 250 mm Tool and workpiece measurement for automatic tool and part size adjustment: - Tool radius and length measurement - Tool breakage detection - Blum laser for component measurement (Inspect) Disposal system: - Gooseneck slat conveyor - (Chip cart to be provided by buyer) Additional equipment: - Minimum quantity lubrication Minibooster 2 - Machine enclosure with full-area protective covers - Crane loading possible by unhooking the chip protection device at the front - Workspace lighting with two fluorescent lamps on the side walls Machine data: - Space requirement including service areas (LxWxH): approx. 5,000 mm x 4,220 mm x 3,830 mm - Machine weight incl. additional units: approx. 13,000 kg - Connected load: 45 kVA, 400V, 50 Hz This machining center is located in a precision tool and mold making shop. It is exceptionally well-equipped with practical features and is in very good condition. The Depo/ZPS Dynamic 1009 operates precisely and reliably. There is no maintenance or repair backlog.

Condition: good (used), Year of construction: 2000, Multiblade tracked SCM M3 4 - Italian production Fedpfsg Tdfdox Aatspl - year of production 2000 - DTR TECHNICAL SPECIFICATIONS: track width 300 mm cutting height 120 mm engine power 25 kW max. blade diameter 350 mm max. workpiece width 1000 mm min. workpiece length 400 mm adjustable feed on the inverter pneumatically adjustable ruler on the right revolver ruler setting of 6 types three rows of anti-recoil pawls possibility of putting on a board - a shoe spindle diameter 50 mm sleeve diameter 70 mm sleeve equipped with spacers automatic central lubrication four upper pressure shafts spigot diameter 180 mm and 120 mm dimensions of the machine (length / width / height) 210/175/160 cm weight 1800 kg

Condition: used, Year of construction: 2023, Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. Fpedezzz Naspfx Aatsl The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data - Manufacturer / model: Krones PRESSANT UNIVERSAL 1N - Machine type: container sweep-off depalletizer - Year of manufacture: 2023 - Application: depalletizing of glass bottles, several formats - Container throughput: 14,000 containers/h (machine setting) - Pallet format: flat pallets 1,200 x 1,000 mm - Container conveyor height: 1,300 mm - Sweep-off station: raised design for container heights above 320 mm, SEW servo drive - Discharge table: 90° connection, 3,600 mm table length, 15 steel conveyor chains, servo drive (SEW) - Lifting unit: servo drive (SEW), maintenance unit on the columns - Layer scanning: pneumatic - Layer centring: lateral and centring beam servo-motorised (SEW), pneumatic front flap - Stack fixing: lateral, motor-driven; pneumatic transfer plate - Packing material handling: 1 module with pivoted arm, suction gripper for layer pads and complete layers, vacuum ejector, pallet gripper (1 DIN size), motorised gripper frame rotation - Magazines: two magazine and stacking areas, free-standing chute for inverted trays - Central lubrication: Lincoln Quicklub, automatic pump - Pneumatics: Festo, minimum operating air pressure 5 bar, air connection G 1/2" - Power supply: 400 / 230 V, 3 Ph, 50 Hz, 57 A - Overall dimensions: depalletizer approx. 6,000 x 3,500 x H 5,620 mm; complete installation approx. 15,900 x 9,600 x H 5,620 mm - Finish: RAL 5013 cobalt blue columns, RAL 9018 papyrus white and RAL 7037 dusty grey machine parts - CE marked Scope of delivery - Krones PRESSANT UNIVERSAL 1N sweep-off depalletizer - Infeed roller conveyor, stainless steel rollers, roller width 1,350 mm, approx. 1,820 x 1,450 x 1,030 mm - Stainless steel platform with chain conveyor, approx. 5,000 x 2,500 x 1,680 mm - Krones PALCO pallet conveyor and Krones SYNCO container transport - Outfeed conveyors, stainless steel belts, belt widths 1,280 mm and 250 mm, approx. 5,200 x 1,700 x 1,420 mm and 5,700 x 500 x 1,420 mm - Krones operator terminal with production dashboard - Control cabinets with SEW servo drives, safety technology and central lubrication - Machine guarding with safety gates and locking pawl on the sweep-off station - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: good (used), Year of construction: 2000, Leadermac LMC 523 Smartmac four side planer - year of production 2000 - DTR - electronic height and width adjustment - possibility to save permanent parameters TECHNICAL PARAMETERS: - planing width 230 mm - planing height 140 mm - diameter of the spindles 40 mm 1 lower spindle 7.5 kW 2 right spindle 5.5 kW 3 left spindle, 5.5 kW 4 upper spindle 7.5 kW 5 lower spindle 7.5 kW smoothly adjustable feed 3 kW feed motor power electronic height adjustment electronic adjustment of the left head feed on cardan shafts five top steel pull rollers two upper rubber pulling rollers one role in the table top pulling pneumatic material pressure minimum material length 400 mm length of the preliminary table 2000 mm chrome tables stub diameter 5 x 125 mm Machine dimensions Fpodeifftxjpfx Aatjl 370 x 200 x 190 cm weight ~ 3000 kg