Used Protech Horizontal Collator Hc2010 for sale (6,516)

Year of construction: 2026, condition: new, functionality: fully functional, Vibrating screens are used in crushing and screening plant to separate end products of various sizes. When the material is poured into the screen, the smaller ones pass through the screen surface. Vibrating screens are produced in two, three and four decks and in various sizes. The vibration system can be in the middle or above the screen body. It is obtained by rotating the eccentric weights connected to the shaft, which are mounted on the screen body. Screen body sits on fixed or mobile chassis with heavy type helical springs that absorb vibration. The vibration systems of these vibrating screens are operated by belt-pulley transmission with an electric motor. Horizontal screens, which are capable of better-quality screening, are driven by a double drive center. • Model: FABO HTE-2260 Tedpfx Aoy E Hwteiqsa • Type: Horizontal Vibrating Screen • Size: 2200 x 6000 mm • Deck size: 2-3-4 • Motor: 2 x 30 kW • Bearings: Heavy duty SKF-FAG • Capacity: 250-370 TPH • Including chassis, motor and safety guards. Depending on its size, it has a screening capacity in the range of 250-370 tons per hour.

Condition: excellent (used), Catalogue number 7787 TECHNICAL SPECIFICATIONS - Tool diameter: 14mm - Maximum drilling depth: 170mm - Maximum milling length: 180mm - Adjustment of drilling apparatus front/rear - Table adjustment up/down and sideways - Table swivel angle: +/-20˚ - Working table dimensions: 620x280mm - Material clamping - Motor power: 1.5kW - Brake - Dimensions (L/W/H): 1070x660x1250mm Todpfx Aiszabakjqsa - Weight: 300kg ADVANTAGES – Polish production – Very good condition – Used drilling machine Net price: 5900 PLN Net price: 1400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 7908 TECHNICAL SPECIFICATIONS - Tool diameter, Wescott chuck 0-20mm - Max hole depth 155mm - Max milling length 250mm - Drill unit adjustment front/back, right/left + angle - Table adjustment up/down - Table swivel angle 0-45˚ - Working table dimensions 600x320mm Tjdpfxjy Tw Tze Aiqoa - Four-point head 16-22-25-32mm - Material clamps 2 pcs - Motor power 2.2kW - Dimensions (L/W/H) 1050x800x1250mm - Weight 200kg ADVANTAGES – German-made – Very good condition – Eccentric clamps, 2 pcs – Not repainted – Used drilling machine Net price: 6,500 PLN Net price: 1,550 EUR based on rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, HORIZONTAL PRESS PRESSURE 80t Tedpfx Ajihvnmsiqsa

Condition: new, functionality: fully functional, Year of construction: 2023, - In stock, unit is available! - The Rotection flowpack machine is suitable for packaging various products. A large operating display (HMI) ensures easy access to necessary data, such as tubular bag length. Model designation: Rotection tubular bag machine Operating display: 6.8" display Drives: Servo Packing length: 40-400mm Packaging width: 35-160 mm (depending on film width) Packing height: dependent on form shoulder Speed: 80-100 bags/min. in continuous operation Tsdpfx Aeinwi Hoiqja Speed: up to 70 bags/min. Intermittently Film width: 90-400 mm Power consumption: 5 KW Power supply: 220-240 V / 50 Hz / 1-phase System weight: approx. 400 kg System dimensions: approx. 4000 x 930 x 1370 mm Error rate: < 5% *The above information refers to the model: RMFP70. This is a horizontal packaging machine. In the picture gallery you will find various models from our range of systems. Of course we offer you state of the art Box-Motion tubular bag systems. In order to be able to offer you the right packaging system for your requirements, our engineers are available to advise you. Of course, we will supply you with suitable mounting frames for the use of thermal transfer printers, or we will be happy to offer you a suitable system. We would be happy to carry out a test with your product in advance in order to offer you the right form shoulder and to be able to make a statement on the performance.

Condition: used, Year of construction: 2014, CNC machining center, horizontal Manufacturer: Spinner Type: H630-A Year of manufacture: 2014 Control system: Fanuc 0iMD Tsdpfxozqy I Hs Aiqsa Travel ranges: X/Y/Z: 1,000 x 850 x 950 mm Milling spindle up to 10,000 rpm with “In-Line” direct drive Tool taper size 40 Air blow-out system for spindle taper 4th axis: rotary table Dual-pallet changer: 2 x 630 x 630 mm High-speed automatic tool changer 100-tool capacity Horizontal milling and drilling Multi-sided machining in conjunction with a rotary table as the 4th axis Glass scales in all axes Laser tool measurement, workpiece measuring probe RENISHAW IKZ 40 bar Splash guard High-pressure flushing system Work area light 30726

Condition: ready for operation (used), Table size: 1300x1100mm X: 1300mm Todpfsh E Dnhjx Aiqja Y: 1300mm Spindle travel: 500 mm UNDER POWER!!

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 300 mm saw band length: 3200 mm saw band width: 27 mm dimensions of saw-band: 3660 x 25 x 0,9 mm Tjdpfxozp Iu Sj Aiqoa electrical connection: 400/50 V / Hz. total power requirement: 1,1 kW work height max.: 650 mm machine weight approx.: 960 kg cutting speed: 15 - 95 m/min dimension machine approx.LxWxH: 2,2 x 2,0 x 1,3 m The Klaeger & Müller HBA 300 G CNC is a robust, hydraulically operated CNC horizontal band saw designed for precise and economical cutting of solid materials, tubes, and profiles made of steel, stainless steel, aluminum, and non-ferrous metals. Thanks to its CNC control system, it enables the automatic processing of production batches with high repeatability and productivity. The machine is equipped with a hydraulic material feed, automatic saw feed, and infinitely variable blade speed adjustment, allowing optimal machining of a wide variety of materials. Its rigid machine construction ensures smooth, low-vibration operation, excellent cutting quality, and extended saw blade life. In addition, the band saw is fitted with a coolant system that improves blade life and ensures clean, accurate cutting surfaces. The Klaeger & Müller HBA 300 G CNC is particularly suitable for industrial applications in metal fabrication shops, steel construction, toolmaking, mechanical engineering, and serial production. *

Condition: used, Year of construction: 2012, CNC machining center, horizontal Manufacturer: Spinner Type: H500-A Year of manufacture: 2012 Control: Fanuc Oimd Travel range: X/Y/Z: 700 x 650 x 650 mm; 36 m/min. Milling spindle 12,000 rpm with "in-line" direct drive Tool taper size 40 Air blow-out system for spindle taper 4th axis: rotary table 2-position pallet changer: 2 x 500 x 500 mm High-speed automatic tool changer as a dual-arm changer for 60 tools Tedpfxszqva Se Aiqsa Horizontal milling and drilling Multi-sided machining in conjunction with a rotary table as the 4th axis Linear guide in all three axes Glass scales in all axes Laser tool measurement, workpiece measuring probe RENISHAW IKZ 40 bar Splash guard full enclosure High-pressure flushing Work area light 30726

Condition: ready for operation (used), Year of construction: 1997, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1500 mm Y-AXIS TRAVEL: 1200 mm Todpfsh Hfrnjx Aiqoa Z-AXIS TRAVEL: 1250 mm SPINDLE: 10-4000 rpm; 40 kW; HSK-A 100 PALLET: CONTINUOUS ; 1000X1000 mm; 1-500 rpm MAX ADMITTED LOAD: 2000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 161 POS CONTROL UNIT: SIEMENS 840 C OVERALL DIMENSIONS: 8500 x 4800 x 4800 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER NOTE: COMPLETELY OVERHAULED MACHINE; HORIZONTAL AND VERTICAL AUTOMATIC HEAD; TURNING TABLE

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Tjdpfevvkqgex Aiqja Storage location: Nattheim

Condition: not inspected (used), Year of construction: 2008, machine/vehicle number: 6459103335, total height: 1,600 mm, total length: 2,500 mm, total width: 1,800 mm, Horizontal bandsaw machine KASTO KASTOtwin A2 - Availability: Immediately - upon agreement - Can be inspected while powered on: Yes Technical data: - Max. cutting range for round material: 260 mm (min. 10 mm) - Max. cutting range for square material: 260 x 260 mm - Max. cutting speed: 20–110 m/min - Control system: CompactControl Scope of delivery: - Chip conveyor - Operating manual Dimensions & weights: - Installation dimensions L x W x H approx.: 2,500 x 1,800 x 1,600 mm - Weight approx.: 1,700 kg If you have any questions or would like to arrange an inspection, please do not hesitate to contact us! Additional notes: Tjdszqd Tgopfx Aiqja ►Upon request, we can offer transport to the desired location. ►The quoted price is net, plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data subject to change without notice. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Year of construction: 2024, condition: new, functionality: fully functional, Semi-automatic horizontal orbital stretch wrapping machine designed for wrapping long products such as timber, aluminium profiles, plastic extrusions, pipes, textiles and similar materials. Equipped with infeed and outfeed roller conveyors for easy product handling. Modell Robopack Compacta 12 Production year 2024 Installed power 1,5 kW Diameter 1200 mm Feeding roller Yes Tsdpfezkf Sksx Aiqoa Outfeeding roller Yes Condition New (not used) Conveyors 2 pc. INCLUDED

Condition: like new (used), Year of construction: 2021, functionality: fully functional, HORIZONTAL WRAPPER GSP 55 S for sale! Machine condition: like new, used only in a showroom for demonstration purposes. The machine is supplied as follows: - Cantilever main frame and guards manufactured in anticorrosive steel plates painted RAL 9007, machine on adjustable feet. - 2.000 mm length infeed conveyor with stainless steel product contact surfaces (AISI 304); - Quick replaceable plastic pushers suitable for food use. - Longitudinal sealing unit, made by three sets of fin wheels: the first one cold, diam 100 mm to pull the film, the second one heated, diam 100 mm to seal the film; the third one cold and conical, diam 60 mm, used to drive the film; film cooling air blow. - First set of wheels opening through touch screen - Pneumatic opening of heated wheels by machine stop - Easy opening of deck plates over fin seal without any tools - 190 or 270 mm one up jaw width, rotating one with inclined knife and transversal or longitudinal welding pattern. - Safety device fitted onto the cross welding unit Motorization: - Multi-axes drive technology with : - n. 1 brushless motor for the infeed conveyor control - n. 1 brushless motor for the back seal rollers control - n. 1 brushless motor for the transversal sealing unit control - n. 1 dc brushless motor for the outfeed conveyor control - Cantilever single reel film holder for 520 mm film width, with expansion blades pneumatically activated to hold the film reel - 1.000 mm powered out-feed belt - Machine stop in phase with open cross sealing jaws. - Safety covers manufactured in anticorrosive steel plates painted RAL 9007, with safety micro-switches - Electrical cabinet - Control panel equipped with: - start button for continuous run - reset button Tedjy Tlc Dopfx Aiqea - e-stop button - positional stop button - power presence led - 7” touch screen display with following functions: - speed setting-up - bag length setting-up - sealing units temperatures setting-up - product phase - sealing jaws speed - (possibility of storing up to 100 programs) - One fixed or adjustable forming box - Set of spare parts. - Machine in left hand execution: products are loaded from the left side and are discharged to the right. (Right hand execution upon request). - Machine manufactured according to the latest CE regulations. Machine is equipped with following additional options: Main frame and infeed conveyor in stainless steel execution Gear shift on electronic machines (up to GSP 65 EVO) Photocell for print reg. film for electronic machine Product support on infeed conveyor (up to GSP 65 EVO) Each additional meter of products carrying plates (for GSP 600 EVO, GSP 600 EVO BB e GSP 75 EVO) 1.000 mm stainless steel infeed conveyor extension Provision for printer No product - no bag photocell Motorised film unwinding with Brushless motor Motorised cross jaws H adjustment Pre-heating film Two-up jaws Removable sealing jaw Cantilever sealing jaw Reel holder for 720 mm film width Double self-supporting reel holder Air blow to reject empty/double or spliced packages Adjustable pusher drop-down position Gusseting device (rotary type) Handwheel for film reel holder centering Pre-cutting unit for rotary machines Two-up jaws extra cost - Pre-cutting unit for rotary machines

Condition: used, functionality: fully functional, Main Technical Specifications Machine Todpfoy Uddiex Aiqoa Model: COMDEC LV 50-40 PFT horizontal baling press Pressing force: 50 tons Horizontal hydraulic baler for cardboard, paper and industrial waste Electrical data Power supply: 380 V / 3 phase / 90 A Hydraulic motors: 2 × 22 kW hydraulic pump motors Conveyor pump motor Hydraulic system Hydraulic main cylinder: 180 / 150 × 2000 mm Hydraulic pressure control system with oil cooling and filtration Oil tank with pressure and return filters Machine dimensions Total machine length: approx. 8,394 mm Width: approx. 1,920 mm Height: approx. 3,104 mm Functional equipment Automatic wire tying system Bale length control system Hydraulic wire twisting unit Automatic bale ejection system Conveyor control cabinet and electrical automation system Noise level Working noise level below 70 dBA

Condition: used, Used stainless steel horizontal ribbon blender by WAM GROUP S.p.A. (Italy) model WNHO2400E/0DK. Total capacity of the mixer is 2400 litres. Working capacity is approximately 1500-1700 litres. Stainless steel mixing chamber has internal dimensions of 1210 mm wide x 2000 mm length and is equipped with an inspection door located on the side wall measuring 1200 mm width x 450 mm height. Mixer has interrupted double counter-pitch ribbon screw which is made of magnetic non corrosive steel (ferritic steel). Agitator is driven by gearbox and belts by electric motor with power 18,5 kW, 1470 rpm, 50 Hz. Working rotation speed of shaft is approximately 29 rpm. Unit has central bottom discharge with dimension: width 175 mm x length 250 mm, equipped with pneumatically operated valve. Top cover of the mixer is made of stainless steel and is equipped with a central connection with a diameter of 390 mm. Specifications: Capacity: 2,400 L Material of construction: Stainless steel and magnetic non corrosive steel (ferritic steel) Width: 1,210 mm Horsepower: 18.5 kW Length: 2,000 mm Jacket: No Discharge Type: On bottom pneumatically operated valve Type Of Ribbon: Interrupted double counter-pitch ribbon screw Revolutions Per Minute: 29 Tsdpfszbucnsx Aiqoa

Condition: excellent (used), Year of construction: 2008, operating hours: 18,500 h, functionality: fully functional, controller manufacturer: Haas, controller model: haas, spindle motor power: 22,000 W, number of spindles: 1, number of slots in tool magazine: 40, Haas EC500 2008 ATC-40 tools . BT40. 2 Pallets spndel time -18500H Spindel rpm- 12000 rpm X-axis travel: 813 mm Y-axis travel: 635 mm Z-axis travel: 711 mm Pallet size: 500 x 500 mm Number of pallets: 2 Tjdpfoziflzox Aiqoa Automatic pallet changer under power Located in Israel ready for inspection

Condition: used, Year of construction: 1998, machine/vehicle number: 0102-260022, The Behringer HBP 430N is a horizontal, double-column bandsaw designed for professional use in metalworking. It is suitable for precisely cutting solid materials, pipes, and profiles and impresses with its robust construction and high cutting accuracy. The machine is designed for straight cuts; depending on the configuration, miter cuts up to 45° are also possible. With a cutting range of Ø 430 mm or 600 × 430 mm and a continuously variable cutting speed of 17 to 110 m/min, it can be used in a variety of applications. The powerful 7.5 kW sawing motor, hydraulic workpiece clamping, and coolant system with 150 liters ensure reliable and economical operation. With a machine weight of 2,100 kg, the HBP 430N offers high stability and is ideal for daily use in metalworking, steel construction, and mechanical engineering companies. Technical Data HBP 430 N Working range 90° round Ø 430 mm Working range 90° flat 600 × 430 mm Working range 45° flat 320 × 430 mm Smallest material dimension 15 mm / 10 × 15 mm Smallest section length 10 mm Remaining piece length approx. 40 mm Cutting speed 17–110 m/min Coolant tank 150 l Tedpfx Aijzq S Nceqsa Belt tension 80 bar Sawing motor 7.5 kW Hydraulic motor 2.2 kW Coolant pump 0.12 kW Chip conveyor 0.09 kW Connected load approx. 11 kW Mains connection 400 V / 50 Hz Control voltage 24 V DC Current consumption approx. 22 A Fuse 35 A Cable cross-section min. 4 × 6 mm² Saw band dimension 5,800 × 54 × 1.3 mm Machine weight 2,100 kg Material support height 700 mm

Condition: used, Year of construction: 2012, machine/vehicle number: 0102-260024, The Behringer HBP 313N is a horizontal, double-column bandsaw for industrial metalworking. It is used for the precise cutting of solid materials, pipes, and profiles. Its robust design and continuously adjustable cutting speed make it suitable for use in both single-piece and series production. The machine has a working area of Ø 310 mm for round materials and 500 × 300 mm for flat materials. The cutting speed is adjustable between 20 and 140 m/min. A coolant system with a 60-liter capacity ensures good cooling and a long service life for the saw blade. The machine is powered by a 4.0 kW saw motor. The electrical connection is 400 V / 50 Hz, and the control system operates at 24 V DC. With a machine weight of 1,960 kg, the HBP 313N offers high stability and ensures precise machining of metal materials. Technical specifications: Saw blade dimensions 5,000 x 34 x 1.1 mm Working area Ø 310 mm / 500 × 300 mm Cutting speed 20–140 m/min Coolant 60 l Belt tension 60 bar Saw motor 4.0 kW Connected load approx. 7 kW Mains connection 400 V, 50 Hz Control voltage 24 V DC Machine weight 1,960 kg Tsdpfx Aiszq S Hnoqea Material support height 800 mm

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, power: 2.2 kW (2.99 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 140 mm, cutting width (max.): 650 mm, control type: manual, actuation type: electric, total height: 1,800 mm, total length: 2,820 mm, total width: 2,550 mm, Equipment: CE marking, documentation/manual, motor brake, For sale is a professional HEMA HTR 600 horizontal bandsaw, manufactured in 2004. The machine comes from the original owner, a bookbinding company, and was used there exclusively for the precise cutting of copper plates. Accordingly, it is in very good and well-maintained condition. Thanks to the integrated conveyor belt, the HEMA HTR 600 is ideally suited for continuous operation and precise cutting of various materials. Technical data: Manufacturer: HEMA Model: HTR 600 Year of manufacture: 2004 Wheel diameter: 600 mm Tjdpszqak Uofx Aiqsa Max. cutting height: 140 mm (distance between conveyor belt and saw blade) Conveyor belt width: 650 mm Conveyor belt speed: 0.5 to 5 m/min (continuously variable) Cutting speed: 1,640 m/min Saw blade dimensions: Length max. 5,600 mm | Width 8 to 25 mm | Thickness max. 0.65 mm Dust extraction connections: 3x Ø 100 mm (cutting point, deflection point, conveyor belt) Saw motor power: 2.2 kW Feed motor power: 0.12 kW Electrical connection: 400 V / 3 phase / 25 A fuse Working height: 955 mm Dimensions (L x W x H): approx. 2,820 mm x 2,550 mm x 1,800 mm Weight: approx. 700 kg Condition & Notes: Previous application: Bookbinding (copper processing) The machine is fully functional and ready for immediate use. Self-collection or shipping via freight forwarder is possible (costs are borne by the buyer). If you are interested or have any questions, please do not hesitate to contact us!

Condition: new, Year of construction: 2026, CORMAK E910 Horizontal Band Sawmill The CORMAK E910 is an advanced horizontal band sawmill engineered for professional sawmill and timber processing applications. Featuring a heavy-duty four-column frame, a large cutting capacity, and a reliable 7.5 kW (400 V) motor, it delivers precise cutting performance for both softwood and hardwood. An integrated blade cooling system and reinforced saw head guidance make the E910 one of the most durable and efficient band sawmills in its class. Key Features Maximum cutting width of 710 mm – allows efficient processing of large logs and timber while maintaining excellent cutting stability. Maximum cutting height of 770 mm – adjustable blade height enables precise cutting of materials with various cross-sections. 6,000 mm cutting length – accommodates long logs without the need for repositioning. Dynamically balanced cast iron band wheels – ensure smooth and stable blade operation. Manual feed and height adjustment – provide full operator control and precise adaptation to different workpieces. Integrated blade cooling system – prevents overheating and extends blade service life. Band blade safety guard – enhances operator safety and complies with workplace safety standards. Rigid machine frame – minimizes vibration and ensures straight, accurate cuts. Construction and Technology The CORMAK E910 features a robust four-column frame with additional rear reinforcement, providing exceptional structural rigidity. It is equipped with a high-quality 35 mm wide, 4,000 mm long band saw blade operating at a speed of 17 m/s, ensuring efficient and precise cutting performance. The saw head is manually fed, giving the operator complete control over the cutting process and allowing optimal adjustment for different types of timber. The machine is supplied with a 12-litre coolant reservoir, which continuously lubricates and cools the blade, significantly reducing wear and extending blade life. Performance and Precision Designed for continuous operation in sawmills and timber processing plants, the E910 offers excellent cutting accuracy and repeatability. Its substantial 488 kg machine weight, wide track spacing, and dynamically balanced band wheels provide outstanding stability throughout the cutting process. With a maximum cutting thickness of 475 mm, the machine can process large-diameter logs, while the narrow kerf of 1.4–2.2 mm minimizes material waste and maximizes timber yield. Standard Equipment Tsdpfx Ajvvr Sxjiqsa 4,000 mm band saw blade 6,000 mm rail track set Blade cooling and lubrication system Band blade safety guard Adjustable log clamp FREE band saw blade – machine supplied ready for operation Technical Specifications Specification Value Power Supply 400 V Motor Power 7.5 kW (10.2 HP) Maximum Cutting Width 710 mm Maximum Blade Height 770 mm Minimum Blade Height 55 mm Maximum Cutting Thickness 475 mm Maximum Cutting Length 6,000 mm Band Blade Guard Yes Band Blade Width 35 mm Band Blade Length 4,000 mm Band Wheel Diameter 470 mm Band Wheel Width 25 mm Blade Speed 17 m/s Kerf Width 1.4–2.2 mm Coolant Tank Capacity 12 L Feed System Manual Machine Dimensions (L × W × H) 6000 × 1980 × 1810 mm Net Weight 488 kg

Condition: good (used), U-profile for horizontal and diagonal applications 📏 Length: max. 3 meters (cutting to size on request) 🔩 Material thickness: 1.8 mm Tedpfeuq A Ngjx Aiqea 📐 Width: 50 mm and 70 mm 🏭 Compatible with: Nedcon, Polypal, Stow, and MPB shelving systems If you require shelving or accessories in other configurations or designs, please contact us. Shipping: Please inquire about the shipping costs, providing your postal code and city, as well as the desired quantity of items.

Condition: used, grinding length 600 mm grinding width 200 mm workpiece height 250 mm grinding wheel diameter 200 mm Todpfou N I Nksx Aiqea grinding wheel width 20 mm weight of the machine ca. 1000 kg dimensions of the machine ca. 2000 x 1200 x 1650 m

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 8,000 rpm, coolant supply: 200 bar, spindle motor power: 43,000 W, number of spindles: 1, number of slots in tool magazine: 50, Equipment: chip conveyor, documentation/manual, Year of manufacture: 2012 Control system: Siemens 840D SL Tedezpyinepfx Aiqja Spindle: PC unit, 8000 rpm, 43 kW, 822 Nm Tool clamping system: SK 50 Magazine / positions (options): Chain / 50 Rotary table: 360,000° x 0.001° Coolant system: KNOLL, KF 200, internal coolant pressure 50 bar, (work area flushing) Working area XYZ (mm): 800 / 800 / 800 Pallet size (mm): 500 x 400 Workpiece clamping: Hydraulic, 200 bar Additional options, special features: Receiver for wireless measuring probe (Renishaw); Fast drill break detection (SBBK); Pneumatic support control at the workpiece setup station; 4th line in the work area; Interface for robot loading; Integrated process monitoring (IPM); Evasion strategy; Interface for extraction.

Condition: excellent (used), MATSUURA H. PLUS 300 is a Horizontal machining center with high precision, excellent accuracy and reliability. Travels X/Y/Z 500 mm; workpieces Ø 530 mm, h 700 mm; pallets 300×300 mm (10), max workpiece 250 kg, change 7 s. Spindle BT40 50–15,000 rpm, 95.4 Nm, 15/22 kW; feeds 1–50,000 mm/min, rapid 50 m/min; 3×380 V 50 Hz; weight ≈7000 kg; dims 3660×2463×2445 mm. Tool magazine 90 pos., tool change 2 s, chip-to-chip 2.9 s. Coolant 1500 l, chip conveyor, toolholder set, spindle oil cooler. Suited to tight tolerances in automotive, aerospace, medical, watchmaking and mould/die. Todezqblyjpfx Aiqea