Used Ptc Ctr-H for sale (60,636)

Condition: as good as new (ex-display), Year of construction: 2020, functionality: fully functional, Demonstration model, still in the box, Ksdpfez Az D Iox Afdjnb

Condition: excellent (used), Year of construction: 2003, operating hours: 27,900 h, functionality: fully functional, clamping force: 1 kN, screw diameter: 32 mm, Type: HL120 RS35/32 Kodpfxsu E Unfo Afdonb Year : 2003 Auger ø 32 mm Hours: 27.900 h

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 600007090, roller (bottom) diameter: 280 mm, roller (top) diameter: 280 mm, working width: 3,100 mm, sheet thickness (max.): 13 mm, power: 15 kW (20.39 HP), TECHNICAL DETAILS Number of rollers: 4 Number of driven rollers: 2 Diameter of upper roller: 280 mm Diameter of lower rollers: 280 mm Max. sheet thickness: 13 mm Max. pre-bending thickness: 10 mm Max. working width: 3,100 mm Knsdpszxdk Ijfx Afdjb Bending speed: 5,000 mm/min Drive: Hydraulic Control: Conventional Power: 15 kW MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,810 x 1,980 x 1,540 mm Weight: 11,500 kg Transport packages: 2 EQUIPMENT CE marking

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here we offer the following well-maintained used injection moulding machine as an injection moulding machine dealer: Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from original German ownership xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic needle shut-off nozzle - 1 pneumatic valve on BWAP - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable - Euromap 18 interface on FWAP - Electrically actuated ejector plate in BWAP - Hydraulic auxiliary unit for core pulls - Injection-compression control - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8 circuits - 8 heating zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up sequence, quality assurance package, cycle time analysis, cycle memory, event protocol - BluePOWER package: energy consumption display - Graphics analysis package, trend chart - Interface for temperature control unit - Cycle time analysis, actual cycle time optimization Injection unit: Screw diameter: 40 mm Shot weight: 186 g / PS Injection pressure: 1,860 bar Knodpfx Ajyrd U Uefdjb Shot volume: 204 cm³ Clamping unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould installation height: 250 mm Max. platen gap: 750 mm Ejector stroke/force: 100 mm / 22 kN Clamping unit fully electric Warranty: Warranty until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight charges Available from our warehouse in Hannover, Germany

Condition: used, Year of construction: 1996, overall grade 1-5 (1 bad, 5 like new): 5/5 certificates: CE The number of wheels: 4 Maximum lifting capacity: 2.500 kg Maximum lifting height: 4.700 mm Knsdpfxexciiqo Afdsb Lift mast: Triple Attachment equipment: Sideshift Number of wheels: 4 General grade (1 min - 5 max): 5/5 Maximum lift capacity: 2.500 kg Maximum lift height: 4.700 mm Fork carriage: Sideshifter

Condition: used, maximum load weight: 200 kg, overall weight: 2,200 kg, axle configuration: 1 axle, first registration: 04/2004, total width: 2,500 mm, total height: 2,750 mm, Year of construction: 2004, Selling CTR dispensing trailer * 2 flow coolers * 4 beer taps Knodpfxozig Spe Afdsb * Lighting newly installed * Car coupling * New TÜV (technical inspection) upon purchase * Sale according to § 25A. No VAT. * Errors and prior sale excepted.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X396V01495, Year of construction: 2019, operating hours: 15,000 h, load capacity: 8,000 kg, lifting height: 7,000 mm, fuel type: diesel, mast type: duplex, construction height: 4,300 mm, No minimum price – guaranteed sale to the highest bidder! The forklift has a license plate! TECHNICAL DETAILS Lifting height: 7,000 mm Lifting capacity: 8,000 kg Number of wheels: 4 MACHINE DETAILS Mast type: Duplex Fuel type: Diesel Engine manufacturer: Deutz Operating hours: 15,000 h Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,230 x 4,100 mm Overhead height: 4,300 mm Knedpfxszza Tko Afdsb Unladen weight: 13,050 kg EQUIPMENT 3rd and 4th hydraulic valve for the fork carriage Heater Joystick Work lights Full cabin User manual CE marking

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 800 h, functionality: fully functional, clamping force: 1,250 kN, ejector force: 25,000 N, All FANUC Roboshot CNC machines are FULLY ELECTRIC -warranty Knodpoya D I Dsfx Afdsb -only 800 hours FANUC Roboshot S100iB 2024 Clamping force: 125 tons Screw diameter: according to customer specifications All additional equipment is configurable based on customer needs and can be upgraded to meet specific application requirements. Additional optional equipment: -FIBER sorting flap (for separation of good and reject parts) -Hot runner controller (integrated and connected to the machine) -V-gate -Additional electrical sockets -Electrical quick coupling for fast mould change -Water piping system -Mouldflo system for digital monitoring of water flow, temperature, and pressure -Machine elevation by 100 mm -Hydraulic power unit for side cores (2CH / 4CH) -Robot (cartesian STAR robot) -Robot (6-axis FANUC robot) -and more This machine is available for Slovenia, Croatia, Bosnia and Herzegovina, and Serbia.

Condition: excellent (used), 199 USED Croissant and Croissant Cutting Machine. Knedpoxqdwxefx Afdjb EQUIPMENT: - 5-croissant cutter head, - 5-croissant cutter, 11x25 cm, - CHR croissant wrapper. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: like new (used), Year of construction: 2020, operating hours: 550 h, functionality: fully functional, fuel type: electric, color: blue, empty load weight: 248 kg, gearing type: automatic, For sale in new condition, battery-powered, driver's seat sweeper, cleaning machine WEIDNER STAR 110E 6500nm2 industrial sweeper new work batteries! manufacturer Weidner KS1-00110E year of manufacture: 2020. Knsdpfx Aezf Aviofdjb hours of operation: 550 h STAR 110 Technical characteristics: Working width adjustable main brush: 700mm Working width with 2 side brushes: 1,100 mm Electrical system: 24v 4X 6V /180AH work battery NEW!!! Working capacity: max. 6,800 m2/h Practical working capacity: max. 5000 m2/h Garbage container: 68 liters Large panel filter - antistatic cellulose surface: 6 m2 with electric filter shaking Adjustable main brush, Liftable “flap” for easier sweeping of larger pieces of garbage Direct sweeping into the container Battery charge indicator Operating hour counter 24V Automatic charger Dust-free sweeping thanks to vacuuming, Vacuum interruption for sweeping wet areas, Dimensions (lxwxh): 1453x897x1230 mm weight: 225kg + battery pack

Year of construction: 2025, condition: used, New: Yes Ksdpfx Afjx S Rzvjdenb Attachment suited for: Agricultural machines

Condition: used, Year of construction: 2007, operating hours: 902 h, Drivetrain Drive: Wheel Weights Empty weight: 2.760 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.000 cm Dimensions of cargo space: 270 x 100 x 199 cm CE mark: yes History Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: average Other information Max. horizontal reach: 300 m Max swing of arm in degrees: 345 Additional information Please contact Bas Sindorf for more information The Haulotte Star 10 is an electric vertical mast lift with a jib, designed for indoor maintenance, warehouse work, and access in confined spaces. Main Specifications Specification Value Working height 10.0 m Platform height 8.0 m Horizontal outreach 3.0 m Platform capacity 200 kg Platform size 0.78 × 0.98 m Overall length 2.7 m Overall width 1.0 m Knodpfxezayx Ee Afdeb Stowed height 1.99 m Weight approx. 2,677 kg Power source 24 V / 250 Ah battery pack Drive speed 0.6–5 km/h Gradeability 25% Outside turning radius 1.88 m Turret rotation 345° Vertical jib movement 130° (+70° / -60°) Ground clearance 10 cm Features * Zero tail swing for working in tight areas. * Electric AC drive motors with smooth proportional control. * Can be driven at full platform height (up to 8 m). * Non-marking tires for indoor use. * Automatic battery watering system. * On-board diagnostic system (Haulotte Activ’Screen). * Forklift pockets integrated into the chassis for easier transport. Typical 2007 Model Data Most 2007 Star 10 units have: * 10 m working height * 200 kg platform capacity * 3 m outreach * Electric 24 V battery system * Operating weight around 2.7 tonnes Exact specifications can vary slightly depending on the serial number, market version, and factory options.

Condition: excellent (used), mileage: 5,25,445 km, power: 265 kW (360.30 HP), first registration: 10/2004, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro3, number of seats: 2, total length: 9,190 mm, Year of construction: 2004, Equipment: ABS, crane, electric window regulation, retarder, = Additional options and accessories = - Lift Axle - Radio/CD player - Steering Axle = Remarks = Crane Number of hydraulic extensions: 2 Number of support legs: 2 Load Hook: × Meter capacity: 8 m Capacity kilo: 5580 kg = More information = General information Number of doors: 2 Cab: single Registration number: 1RNL674 Axle configuration Front axle: Steering Kjdezvq E Topfx Afdonb Rear axle 1: Double wheels Rear axle 2: Lift axle; Steering Weights Empty weight: 12.760 kg Carrying capacity: 13.240 kg GVW: 26.000 kg Functional Crane: FASSI F 130 A, behind the cab Extendable superstructure: Yes Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), mileage: 5,25,445 km, power: 265 kW (360.30 HP), first registration: 10/2004, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro3, number of seats: 2, total length: 9,190 mm, Year of construction: 2004, Equipment: ABS, crane, electric window regulation, retarder, = Additional options and accessories = - Lift Axle - Radio/CD player - Steering Axle = Remarks = Crane Number of hydraulic extensions: 2 Number of support legs: 2 Load Hook: × Meter capacity: 8 m Capacity kilo: 5580 kg = More information = General information Number of doors: 2 Cab: single Registration number: 1RNL674 Axle configuration Knodpfx Aszvq Egsfdob Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Lift axle; Steering Weights Empty weight: 12.760 kg Carrying capacity: 13.240 kg GVW: 26.000 kg Functional Crane: FASSI F 130 A, behind the cab Extendable superstructure: Yes Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), Electric cart mover Power Attack MTC 30 CC Device in very good condition. Ideal for transporting heavy goods, machines, boats, etc. After inspection, brand new batteries 2 pcs, new tires, charger, hook, fastening element with transport rollers included. Manufacturer’s description: Thanks to our compact electric towing tractors, you can efficiently transport heavy loads weighing up to 25 tons. These efficient transport devices are characterized primarily by the fact that they are emission-free, quiet, compact and efficient. Therefore, they are particularly suitable for internal use in warehouses and production halls. Kodpfx Afowunl Dedsnb Product features: Pulling force 30 t Length: 1650 mm / double telescopic Roller width: 380 mm Weight: 70 kg

Condition: as good as new (ex-display), Demonstration machine Extra strong, robust, durable bandsaw mill for logs with a maximum diameter of up to 1000 mm. Includes soft starter, can be extended with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment controlled from the operator panel. Equipped with telescopic log turner, log lifter, log lifter with drive for horizontal log feed. Hydraulic angle stops. Includes 2 log clamping devices. Hydraulic saw blade tensioning. Electrically adjustable saw blade guide. CE certified. Technical data: Max. log diameter: 1000 mm Max. board width (slab width): 920 mm Max. saw blade stroke: 900 mm Min. cutting height: 30 mm Max. frame opening: 365 mm Cutting length of base section: 7.5 m Extension section length: 3 m Saw blade drive output at 100% duty cycle: 22 kW Feed motor at 100% duty cycle: 3 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5960 x 60 x 0.9-1.3 mm Weight of base version: 2800 kg This machine includes the following accessories: CTR-1000H60-Ver3 – 3m extension section (extends the cutting length by 3m). CTR-VOR-1300H – Pre-cutting device (for maximum saw blade service life). CTR-AMP – Ammeter (shows the current consumption). CTR950H-KSD – Chain log turner (for hydraulically turning logs). Knsdpfxovrvq Ds Afdeb CTR950H-DS – Double-arm log loader (for hydraulic loading). CTR950H-MR – Material chute (allows the end of the pushed material to slide onto subsequent belt or roller conveyors). CTR1000H40-ZUB – Outfeed conveyor for sawn material (allows for very easy material removal or material can be pushed onto subsequent belt or roller conveyors).

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between Knodpfxjz Df Txe Afdob the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: used, power: 160 kW (217.54 HP), Field of application: Mining Experience the pinnacle of versatile crushing with Polygonmach Machinery’s Tertiary Impact Crusher (HSI). Engineered to deliver exceptional performance in a wide range of applications, this advanced crusher takes your aggregate production to new heights. The Tertiary Impact Crusher (HSI) is specifically designed for fine crushing and shaping of hard and medium-hard materials. It stands as the ultimate solution for producing high-quality aggregates with precise particle shape and consistent gradation. The Tertiary Impact Crusher (HSI) utilizes a high-speed rotating rotor that generates a powerful impact force. This force efficiently reduces the material size, resulting in finely crushed particles ideal for a variety of applications. When it comes to stone types, the Tertiary Impact Crusher (HSI) proves its versatility. It can effectively handle various types of stones, including limestone, granite, basalt, and more. The crusher's robust design and specialized components ensure optimal performance, regardless of the stone type, making it suitable for a wide range of aggregate production needs. Knjdpfx Asygqw Sefdjb Let's delve into the key components of the Tertiary Impact Crusher: Rotor: The high-speed rotor delivers powerful impacts to the incoming material, ensuring efficient reduction and shaping. Blow Bars: Robust blow bars withstand high impact forces and ensure efficient crushing of the stones. Adjustable Curtains: The adjustable curtains regulate the product size by controlling the gap between the rotor and curtains, allowing precise customization. Feed Hopper: The feed hopper efficiently directs the material into the crushing chamber, ensuring a steady and continuous flow. Technology: impact Mobility: stationary Other characteristics: fine, tertiary, stone, limostone Capacity: Max.: 350 t/h(214 lb/s)Min.: 80 t/h(49 lb/s) Motor power: Max.: 500 kW(679.81 hp)Min.: 160 kW(217.54 hp) Opening height: 1,100 mm, 1,300 mm, 1,400 mm(43.3 in, 51.2 in, 55.1 in) Opening lenght: Max.: 1,800 mm(70.9 in)Min.: 500 mm(19.7 in) net weight: Max.: 33,000 kg(72,752.55 lb)Min.: 10,000 kg(22,046.23 lb)

Condition: excellent (used), color: other, first registration: 01/2022, Year of construction: 2022, operating hours: 234 h, Offered: JEKKO SPX 532 CL fully electric from 2022!! In addition to the options already mentioned, it features: -Winch 800 kg (80 meters) - Hoisting block 4t -Extra hydraulic functions -Hydraulic extendable jib (1000kg) -Short hand jib 1250kg -Extendable tracks -Main mast quick coupler etc etc Dutch machines available immediately! = More information = CE mark: yes Technical condition: very good Visual appearance: very good = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Knedpfez Dgh Djx Afdjb Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation Knjdpfx Aozgq Szefdjb

Condition: used, Year of construction: 2019, High-performance automatic transfer switch (ATS) from the ASCO 7000 Series, designed for critical power infrastructure in data centers, hospitals, industrial facilities, and backup power systems. This is a G-design unit with a solid neutral, rated up to 1200 amps, 3-phase, with Group 5 Controller and Type 1 enclosure. Technical Specifications: Series: ASCO 7000 Series ATS. Design: G-design Current Rating: Up to 1200A (model shown) Voltage: 480V Poles: 3 (Three-phase) Kodsw Enquepfx Afdenb Neutral: Solid (A) Control Module: Group 5 Controller Enclosure Type: Type 1 Frequency: 50/60 Hz Transfer Type: Automatic (Open Transition standard) Certifications: UL 1008, CE, ISO 9001 Features: Field connections via terminal block (TB) Transfer Control & Indicators on door panel Engine Start contacts, Auxiliary Circuits Alarm relays, test functions, diagnostics Fault withstand and closing ratings suitable for generator/utility configurations Compatible with bypass/isolation options (in extended models) Application Areas: Data Centers & Critical IT Healthcare & Life Safety Systems Industrial Facilities Government and Military Infrastructure Commercial Buildings with Backup Generators Condition: Used – Excellent condition, from professional environment. Units available: 8 units in stock

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in service vehicles. PTC Salmon, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/200 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW Salmon 75/150 | 75 l/min at 150 bar | Engine: Vanguard 35 HP 26 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Vanguard 35 HP 26 kW Salmon 45/240 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW DIMENSIONS / WEIGHT: Dimensions without water tank (L x W x H): approx. 760 x 1,250 x 1,200 mm Dimensions with 400 l water tank (L x W x H): approx. 1,220 x 1,250 x 1,200 mm Dimensions with 800 l water tank (L x W x H): approx. 1,670 x 1,250 x 1,200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400 l water tank: approx. 320 kg Empty weight with 800 l water tank: approx. 350 kg HIGH-PRESSURE PUMP:  Manufacturer: HPP  Model: CLW ENGINE:  Manufacturer: Vanguard  Model: 35 HP  Fuel: Gasoline  Max. Output: 35 hp (26 kW) CONTROL PANEL:  Start button  Operating hour counter  Electronic fuel gauge  LED display for oil temperature  LED display for low lubricating oil pressure  LED display for clogged air filter  LED display for engine speed  LED display for generator  LED display for spark plugs  Emergency stop button ELECTRICAL CONTROL:  Winding/unwinding of hydraulic hose reel;  On/Off bypass;  Engine speed control +/-;  Emergency stop button;  Switching to wireless remote control; INSTALLED ALARM:  Water shortage protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES:  The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL:  Type: Electric hose reel  Material: Stainless steel  Capacity: max. 80 m ½“ and 80 m 3/8" high-pressure hose  Hose: 80 m ½“ high-pressure hose (included)  Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: Stainless steel  Capacity: max. 35 m ¾“ low-pressure hose  Hose: 35 m ¾“ low-pressure hose (included) Kedpfx Afsf Arugsdenb WATER FILTER:  With washable cartridge and drain valve.  Filtration degree: 50 Mesh INCLUDED IN DELIVERY:  Multi-function wireless remote control IMET; - On/Off motor; - On/Off bypass; - Engine speed control +/-; - Winding/unwinding of hydraulic hose reel; - Emergency stop button;  Battery charger for wireless remote control;  300, 400, 500 or 800 l (with steel frame) water tank made of polyethylene; OPTIONAL ON REQUEST:  Pulsation/booster pump;  50 or 60 m ½“ high-pressure hose;  50, 60 or 80 m 3/8“ high-pressure hose with G3/4“ connection; ACCESSORIES ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Version with 2 HD hose reels;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Step cleaning device;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request.

Condition: used, Year of construction: 2006, operating hours: 9,831 h, functionality: limited functionality, machine/vehicle number: 1666105, mileage: 6,53,001 km, power: 291.26 kW (396.00 HP), overall weight: 26,000 kg, fuel type: diesel, maximum load weight: 8,820 kg, empty load weight: 17,180 kg, gearing type: semi-automatic, Equipment: ABS, air conditioning, cabin, differential lock, retarder, This offer concerns a complete drilling unit consisting of a truck with mixing plant, trailer, and drilling rig. The unit is only sold as a complete package with all equipment on board. Truck specifications: - Manufacturer: Mercedes-Benz - Model: Actros - First registration: 13.06.2000 - VIN: WDB9502031K494582 - Mileage: 653,001 km - Operating hours: 11,631 h Trailer specifications: - Manufacturer: Blomenröhr - Type: Vehicle/Machine transporter - First registration: 26.04.2006 - VIN: W096882196GB34109 - Permissible gross weight: 19,000 kg Mixing plant specifications: - Manufacturer: Tracto-Technik - Type: MA 07-HP - Serial number: MA 08230572 - Year of manufacture: 2008 - Operating hours: 7,635 h Knedsxwk E Nspfx Afdjb Drilling rig specifications: - Manufacturer: Tracto-Technik - Type: Groundodrill 13X - Year of manufacture: 2003 - Serial number: DRI 03380061 If you have any questions, require further information, or need more pictures, please feel free to contact me.

Condition: like new (used), Year of construction: 2023, machine/vehicle number: SN432511, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,800 mm, total width: 1,900 mm, total height: 2,500 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with 12 months warranty -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1790 x 1900 x 2500 mm Knodezbr U Uspfx Afdob -Control cabinet (w x d x h): 1200 x 500 x 2350 mm -Controller cabinet (w x d x h): 600 x 900 x 1850 mm -Capacity: 1000 liters -Maximum temperature: 1340 °C -Siemens PLC control system H1700 (100 programs, each with 20 segments) -Nabertherm NCC, computer-aided, extremely user-friendly control system, recording of all parameters. Recordings can be processed, supplemented with batch data, etc., and archived and printed. -Printer and UPS integrated in the controller cabinet -Automatically generated report after each heating cycle -Thyristor-controlled -2 opposing, lockable doors with safety interlock -5-sided heating -Manual air inlet damper -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection flange -Calibrated control thermocouples for the three heating zones -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working space, without recording -Separate control cabinet -Audible alarm and alarm light -Overtemperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet + controller cabinet -DGUV V3 test currently valid with report -Documentation, CE declaration, circuit diagrams The oven is in TOP condition. It has been used for approximately 10 months in a cleanroom for the production of implants and is of high quality (new price 100,000 EUR net) and absolutely clean. We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspection in our warehouse upon request! Chamber furnace, furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enameling furnace, drying oven, industrial furnace, ceramic furnace, tempering furnace, sintering furnace

Condition: used, mileage: 6,80,000 km, power: 375 kW (509.86 HP), first registration: 05/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: air conditioning, * Mercedes-Benz 2651 Actros MP2 V8 Tractor Unit * First registration: 2008 * 680,000 km * Euro 5 Kodpfxsyq A Drs Afdenb * Telligent manual transmission with clutch * Tipping hydraulics * Leaf/air suspension * 6x4 axle configuration * Air conditioning * Retarder * Mega cab * Wheelbase: 3.30 m * Unladen weight: 9,575 kg * All injectors replaced! * Engine runs unevenly and smokes * Camshaft likely damaged Special equipment: Work lights on rear cab wall (top), audio system: Radio Truckline CC 65 / 70 with cassette deck, 220 Ah battery, comfort cockpit, air horn, movable cab entrance, rear axle H 7, 13 t, crown wheel 300, reinforced clutch, mounting plate / fifth wheel plate 40 mm for fifth wheel coupling, auxiliary drive MB 2C, Voith retarder, low-maintenance fifth wheel, Fischer fifth wheel coupling, circuit breaker, seats in cab: driver's comfort suspension seat incl. horizontal suspension, sun visor, 24V socket in cab, straight front axle, transmission oil cooler Additional equipment: Emission standard EURO 5, axle configuration: 6x4, trailer socket 24V / 15-pin, work lights, electrically adjustable and heated exterior mirrors, wide-angle exterior mirror heated (left), outside temperature display, rear axle differential lock, cab: L (long), suspension: leaf / air, electric window lifters, 80 A alternator, 16-speed transmission, interior filter: pollen filter, body/chassis: tractor unit, fuel tank: 400 litres, engine: 16.0 litre 375 kW V8 diesel (OM 502 LA), engine brake with constant throttle, wheelbase 3300 mm, fifth wheel coupling: mounting height 150 mm, disc brakes, steel rims 9.00x22.5, cab control, Telligent shifting, Telligent brake system with ABS+ASR, front underrun protection, CB radio pre-installation, telephone/fax pre-installation, immobilizer, central locking incl. key, permissible total weight 26.0 t