Used Rcm Giga 802 for sale (404)

Condition: used, mileage: 5,88,954 km, power: 330 kW (448.67 HP), first registration: 01/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Special equipment: Axle load – measuring device, Airbag driver side, Trailer socket 15-pin 7+7-pin, Work light, Work light rear wall of cab top, Exterior mirror right with maneuvering position, Air horn, Electrical pre-wiring in cab 24V / 100 A, Driver assistance system: Roll control assistant, Vehicle without torque increase 12th gear, Generator 150 A, regulated, Transmission 12-speed - Type: G 211-12, Automatic climate control, Comfort bunk top, wide, Fenders 3-piece, Fuel tank: Combination tank aluminum - 660 liters diesel + 75 liters urea solution (AdBlue), Fuel tank: Additional tank 330 liters aluminum, right, Cooler box / refrigerator, Air deflection system roof (lockable) and side, Mercedes star, illuminated, Engine brake reinforced, On-board unit for toll collection, Tire pressure monitoring system, Retarder, Reversing warning device acoustic and hazard warning lights (warning signal outside), Fifth wheel coupling: low maintenance, lock lubricated, Interface fleet management system, Drawers under dashboard, Circuit breaker, Seat cover / upholstery: Co-driver seat velour, Seat cover / upholstery: Driver seat velour, Seats in cab: Armrests on both sides co-driver seat, Seats in cab: Co-driver seat comfort suspension seat, Seats in cab: Co-driver seat backrest foldable, Seats in cab: Driver seat comfort suspension seat, Sun visor side windows, driver and co-driver door, Steel rims 11.75x22.5 (on front axle), Steel rims 9.75x22.5, Auxiliary heater electric, Storage flap outside left, Socket 12V / 15 A in co-driver footwell additional, Socket 12V additional, Socket 24V / 25 A in co-driver footwell, Socket 24V in storage compartment right, Socket cab 24V, Preparation / switch lift axle on semi-trailer / trailer, Curtain sleeper cabin, Additional thermal insulation Additional equipment: Emission standard EURO 6, Storage compartment above windshield with lid, Axle configuration: 4x2, Axle load front axle 8.0 t, Actros 5, Actros cab L, Approach / front mirror heated, Trailer electrical and brake connection low, Trailer socket 24V / 15-pin, Step on cab left, Exhaust to the right outside, Equipment package: Powertrain 2, Exterior mirror camera MirrorCam, Battery 220 Ah, Differential lock rear axle, Compressed air connection in cab, Compressed air tank steel, Compressed air unit with condensate monitoring, Compressed air unit medium, Automatic switch-on for headlights (light sensor), Driver assistance system: Attention-Assist (fatigue detection sensor), Driver assistance system: Autonomous emergency brake assistant (Active Brake-Assist 5), Driver assistance system: Lane keeping assistant, Cab: Cab entrance fixed, Cab: Interior package chrome, Cab: Tilting device hydraulic, Cab: L BigSpace, 2.50 m, Floor level, Cab: steel-sprung, Comfort, Vehicle outline lights LED, Suspension: Air / Air (full air), Window lifter electric, Windshield tinted, Vehicle without rear window, Speed limiter system, Rear axle with active lubrication, unregulated, Rear axle bevel gear 440, Integral rear, Body / Structure: Semi-trailer tractor, Comfort bunk bottom, Comfort locking system, Steering power pump electronically controlled, Steering wheel with multifunction, Air intake behind cab, Air compressor 2-stage, Air dryer heated, Engine 12.8 L - 330 kW R6 diesel (OM 471), Engine variant OM 471, Type of use: Local transport, Wheelbase not defined, Wheelbase variant 3700 mm, Curb mirror, Waste heat recovery, Disc brakes front and rear axle. Gkodpfszf Tcmsx Apwea

Condition: new, Year of construction: 2026, It is a complete painting system, comprising the following components: Gksdjyaqt Tepfx Apwoa 1) An oven with an air heater (the type of fuel can be adapted to the client's specifications). 2) A spray painting booth equipped with an absorbent filtration system suitable for even the most demanding paint applications. 3) Two parking areas where parts can be placed after painting or curing. 4) A rail system that enables easy movement of parts from one station to another. 5) A trolley for transporting the aforementioned parts. 6) A fully integrated and robust steel structure, engineered for high static stability and to minimize the risk of component failure. From both a design and technical specification perspective, the above installation constitutes a comprehensive and autonomous electrostatic painting line. For limited systems, there is an offer for the complete package at 115,000 euros.

Condition: refurbished (used), functionality: fully functional, Erjo 90 HSMU 802 – Fully refurbished and in like-new condition. Gsdjzc Iuyspfx Apwjka

Condition: used, mileage: 6,62,000 km, power: 331 kW (450.03 HP), first registration: 01/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, * NET PRICE * MP 5 * Giga Space cab with 2 beds * Retarder * Auxiliary air conditioning * Mirror Cam * ACC adaptive cruise control * Lane keeping assist * Hill start assist * Emergency braking assist * Air horns * Sun visor * Tires: 315/80 R22.5 Gkjdpezdl A Nsfx Apwoa * Unladen weight: WhatsApp: Errors and prior sale excepted!! Sale is made excluding all warranties!! - We speak Russian - We speak English - We speak Polish - We speak Spanish

Condition: used, mileage: 4,55,000 km, power: 310 kW (421.48 HP), first registration: 10/2019, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,250 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 10,200 mm, total width: 2,550 mm, total height: 3,980 mm, permissible axle load (axle 1): 11,500 kg, permissible axle load (axle 2): 7,100 kg, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, parking heater, power mirror, traction control, Front axle: Max. axle load: 11500 kg; Steering; Tyre profile left: 255%; Tyre profile right: 255% Rear axle 1: Double wheels; Lift axle; Max. axle load: 7100 kg; Tyre profile left inner: 255%; Tyre profile left outer: 255%; Tyre profile right outer: 100%; Tyre profile right outer: 255% Rear axle 2: Tyre profile left: 20%; Tyre profile right: 20% Number of cylinders: 6 Engine capacity: 12.809 cc Gsdpfezdrgzsx Apwjka Empty weight: 9.980 kg Carrying capacity: 16.020 kg GVW: 26.000 kg Registration number: 81-BZD-8 = Additional options and accessories = - Air horn - Air suspension - Aluminium fuel tank - Heated driver's seat - Line assist - Parrot-hands free - Roof and side spoiler - Visor = Remarks = Chassis length: 800 cm 1st to 2nd axle: 485 cm 500L aluminum fuel tank

Condition: used, mileage: 3,05,800 km, power: 375 kW (509.86 HP), first registration: 04/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, navigation system, parking heater, Lowliner ---- ----* 12-speed automatic transmission * Front axle with air suspension * Front axle load: 8.0 t * Electronic Brake System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Electronic parking brake * Secondary oil retarder * Wheelbase: 3,700 mm * Servotwin steering * Aerodynamic side panels * Comfort driver's air-suspended seat * Massage function for driver's seat * Upper comfort sleeper bunk, wide, level-adjustable * Lower comfort sleeper bunk * Lower mattress: PremiumComfort * Shaving mirror * Electric sunblind, one-piece * LED ambient lighting for driving and living * StyleLine package * Electric stationary air conditioning * Residual heat utilization * Additional hot water heater, driver cab * Additional driver cab thermal insulation * Electric tilt/sliding glass sunroof * Fleet Management System (FMS) interface * Trailer socket 24 V, 15-pin * ExtraLine package * Illuminated Mercedes star * GigaSpace cab, 2.50 m wide, flat floor * Comfort cab suspension, air-suspended * Fixed air deflectors with rear-edge flaps * Transparent exterior sun visor * Air horn * MirrorCam * Central locking system * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * Heated driver's seat Gksdpoy Ei A Eefx Apwja * Tires: 295/60 R 22.5 rear axle * Tires: 355/50 R 22.5 front/leading/trailing axle * Air suspension, Lowliner rear axle * Sound system * Navigation system * Axle load measuring system * 390-liter fuel tank * 60-liter AdBlue tank * 290-liter fuel tank * Automatic high/low beam and cornering light function * Headlamp cleaning system * Engine: OM 471, inline 6, 12.8 L, 375 kW (510 hp), 2500 Nm * Engine version Euro 6, E * High Performance Engine Brake * Safety Package * Climate Package * Economy Package * Driving Package * Comfort Package * Sight Package * Actros Driver Extent * Fifth-wheel coupling with plate, Jost JSK 42MK * Aluminium rims 9.00 x 22.5 * Aluminium rims 11.75 x 22.5, front axle * Electronic Stability Program (ESP) * Lane Keeping Assist * Distance Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 5 * Active Sideguard Assist * Tire pressure monitoring * Active Drive Assist 2 * Driver airbag * Cruise control * Actros Model Generation 5 * Refrigerator in drawer under bed * EBS * Metallic paint * Without spare wheel ----Sale to business customers only! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We are happy to provide you with a leasing or financing offer.

Condition: new, Year of construction: 2026, functionality: fully functional, The system is a fully integrated, automated industrial powder coating line engineered for high-throughput production, process stability, and superior surface finishing quality. It combines a multi-stage chemical pretreatment washer, a high-efficiency electrostatic powder coating booth, a controlled thermal curing oven, and an overhead rail conveyor system designed for continuous or indexed part transportation. The chemical pretreatment washer is designed as a multi-stage surface preparation unit, including degreasing, rinsing, phosphating, and passivation phases. It is constructed from high-grade stainless steel (AISI 304/316) to ensure long-term chemical resistance and structural durability. High-pressure centrifugal pumps along with optimized spray nozzle arrays guarantee full and uniform coverage of complex geometries. The system incorporates closed-loop chemical recirculation, advanced filtration units, and automatic monitoring of pH, conductivity, and bath temperature, ensuring consistent surface activation while minimizing chemical consumption and operational waste. Gkedpfx Asy Htg Djpwsa The electrostatic powder coating booth is designed for maximum transfer efficiency and minimal material loss. It features a high-performance powder recovery system (cyclone or cartridge filtration type), achieving recovery rates above 95%, which significantly reduces operating costs. The booth is constructed with anti-static architecture to prevent powder build-up and to ensure stable electrostatic field distribution. It is fully compatible with both manual and automatic spray gun systems, enabling flexible integration depending on production requirements. The curing oven is a high-performance thermal system designed to provide uniform heat distribution across the entire chamber, with temperature deviation controlled within ±2°C. It operates with forced convection airflow using high-efficiency industrial fans, ensuring homogeneous curing conditions for all coated parts. The heating system can be configured with gas, diesel, or electric resistance elements, depending on the available energy infrastructure. High-density insulated panels minimize thermal losses, while PLC-based control allows precise management of curing profiles and process repeatability, ensuring optimal polymer cross-linking and defect-free surface finishes. The overhead conveyor system provides continuous or step-by-step transport of parts throughout all process stages. It is constructed with heavy-duty chains and high-temperature resistant components suitable for demanding industrial environments. The system includes variable speed control to optimize dwell times in each process zone, enhancing throughput efficiency and process synchronization. Its ergonomic design minimizes manual handling while maximizing production flow stability. From an engineering standpoint, the complete line is designed for maximum operational efficiency, reduced lifecycle cost, and high process reliability. Energy-optimized thermal systems, chemical recovery circuits, and high transfer efficiency coating technology significantly lower total operating expenses while maintaining consistent coating quality. The modular architecture allows for future expansion and customization, making the system suitable for scalable industrial applications.

Condition: excellent (used), Year of construction: 1998, Hermle UWF 802 M Hermle UWF 802 M with Heidenhain TNC 124 NC control, cycle-controlled, year of manufacture 1998, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Travel distances X: 500 mm, Y: 430 mm, Z: 400 mm Table size 800 x 390 mm Spindle connection ISO 40 Spindle speed 71 to 3550 rpm, 18 steps Feed rate X and Y 2 to 1600 mm/min, stepless Feed rate Z 2 to 1000 mm/min, stepless Rapid traverse X and Y 1.6 m/min Rapid traverse Z 1 m/min Spindle drive 3 kW Mains connection 400 volts, 50 Hz - Spindle speed via 18 gear stages - Vertical milling head, swiveling to the right and left Gedpozbrz Iefx Apwoka - Hydro-mechanical tool clamping, vertical and horizontal - Automatic central lubrication - Coolant system located next to the machine - Control cabinet fixed to the machine - Fixed angle table - Operating manual and wiring diagram Space requirement L x W x H 2000 x 1800 x 1950 mm Weight approx. 1750 kg Accessories and equipment: Operating manual, electrical diagrams Machine feet About the machine: We offer a Hermle UWF 802 M milling machine with Heidenhain TNC 124 NC control, cycle-controlled, year of manufacture 1998, in very good condition. The machine is fully functional, of course. All slides move very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see for yourself what condition it is in.

Condition: used, mileage: 3,15,100 km, power: 375 kW (509.86 HP), first registration: 06/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, navigation system, parking heater, Lowliner ---- ---- * 12-speed automatic transmission * Front axle with air suspension * Front axle load capacity: 8.0 t * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Parking brake, electronic * Secondary oil retarder * Wheelbase: 3,700 mm * Aerodynamic side panels * Driver’s comfort air-sprung seat * Massage function for driver’s seat * Wide, adjustable upper comfort bed * Lower comfort bed * PremiumComfort lower mattress * Shaving mirror * Electric sunblind, one-piece * LED ambient lighting for driving and living area * StyleLine * Stand-alone air conditioning system, electric * Automatic climate control * Residual heat utilization * Additional hot water heater, cab * Additional cab heat insulation * Electric sliding/tilting glass roof * Fleet Management System (FMS) interface * Trailer socket 24V, 15-pin * ExtraLine * Illuminated Mercedes star * GigaSpace cab, 2.50 m wide, flat floor * Comfort cab suspension, air-sprung * Fixed aerodynamic roof spoiler with end flaps * Exterior sun visor, transparent * Air horn * MirrorCam * Central locking system * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * Driver’s seat heating * Tires: 295/60 R 22.5 (RA) * Tires: 355/50 R 22.5 (FA/VLA/NLA) * Rear axle air suspension (Lowliner) * Sound system * Navigation system * Axle load monitoring system * Fuel tank: 390 liters * AdBlue tank: 60 liters * Fuel tank: 290 liters * Automatic high/low beam and cornering light * Headlamp cleaning system * Engine: OM 471, R6, 12.8 l, 375 kW (510 hp), 2500 Nm * Engine emission standard: Euro 6, E * High Performance Engine Brake * Safety Package * Climate Package * Economy Package * Driving Package * Comfort Package * Sight Package * Actros Driver Extent * Fifth wheel coupling with plate, Jost JSK 42MK * Aluminum rims 9.00 x 22.5 * Aluminum rims 11.75 x 22.5, FA * Electronic Stability Program (ESP) * Lane Keeping Assist * Distance Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 5 * Active Sideguard Assist Gsdpfx Apeyulunswoka * Tire Pressure Monitoring System * Active Drive Assist 2 * Driver airbag * Cruise control * Actros Model Generation 5 * Refrigerator, drawer type under bed * EBS * Metallic paint finish * Without spare wheel ----Sale only to business customers! No guarantee on the details! Subject to prior sale! Only our general terms and conditions apply! We are happy to offer you a leasing or financing quote.

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1300x800x1350 mm Gedpfxov A E Nks Apweka Weight 370 kg Total power requirement 0 kw

Condition: used, Year of construction: 2022, operating hours: 100 h, Diesel generator set, brand Giga Power LT 500 Power: 500 kVA / 400 kW Brand: GIGAPOWER Unit power: 500 kVA Model: LT-W400GF Unit power: 400 kW Gksdpfx Apsy T Dzfewsa Rated output voltage: 400 V / 230 V Rated current: 720 A Rated frequency: 50 Hz Rated speed: 1500 rpm Engine brand: Hong Kong Cummins Diesel engine (main/standby) power: 428 kW Number of cylinders: 6 Generator brand: Shanghai Duning Lead-acid battery: 120 A / 2 Automatic control system Standard configuration: ATS mute box Water heating (included) Dimensions (L x W x H): 3900 x 1350 x 2020 mm Weight: 3400 kg / 3800 kg

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 430 mm, feed length Z-axis: 400 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 17 rpm, For sale is a CNC / conventional milling machine of the Hermle brand and type UWF 802 M The machine is in good - very good condition and ready for immediate use Technical data Year of construction: 1994 Control: Heidenhein TNC 124 Clamping: Rigid angle table Speed: 17 to 3550 rpm Feed: Stepless Drive power: 6 KW Travel X 500 mm Travel Y: 430 mm Z travel: 400 mm Tool holder SK40 Gksdpfjrvitljx Apwsa Dimensions: L*W*H: 1800*1800*1900 mm Weight: 1.8 t On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, mileage: 4,43,874 km, power: 350 kW (475.87 HP), first registration: 08/2019, fuel type: diesel, tire size: 315/70R22.5, color: white, driver cabin: sleeper cab, gearing type: other, emission class: none, suspension: other, operation weight: 315 kg, Equipment: additional headlights, cabin, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, traction control, MERCEDES ACTROS 1848, 2019, 443,387 km, automatic transmission, intarder, Giga Space cab, alloy wheels, dual fuel tank, 315/70R22.5, side skirts, stationary air conditioning, excellent condition Gksdpfxsx Nbz Ij Apwea

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which Gjdsfg E Hmepfx Apwska ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: not inspected (used), Tool Milling Machine HERMLE UWF 802 M - Travel Control HS 401 - Travel X/Y/Z: 500x430x400 mm - Spindle speed range: 18–3550 rpm - Stepless feed on all three axes - Rapid traverse 0–1.6 m/min on all three axes - Vertical and horizontal milling device - Tool holder ISO 40 - Hydraulic tool clamping - Central lubrication - Drive power: 6 kW - Work lamp - Chip tray - Documentation Dimensions (LxWxH): 1.9x1.8x1.9 m / Weight: 1900 kg Errors and omissions excepted. Gedpfx Ajy Ddz Hepweka

Condition: ready for operation (used), Engine: CAT 3054 DI-T(EPA), power/speed: 78.5kW(107hp)/2300rpm, max. power: 80.5kW (110hp), diesel tank capacity: 160l. Hydraulic system: Hydraulic pumps: 1) circuit: 92l/min, 2) circuit: 73.6l/min, 3) circuit: 18.4l/min, 4) circuit: 8l/min, system pressure: 250bar, hydraulic tank capacity: 350l. Crawler chassis: type: B1, tractive force: 75kN, travel speed: 2.2km/h, specific ground pressure: 5.3N/cm², total width: 2200mm, length of crawler tracks: 1900mm, ground clearance: 390mm, oscillation possibility: +18°/-8°. Drilling equipment: permissible torque: 20kNm, total length: 5765mm, feed length: 4300mm, max. boom length: 4000mm, feed force: 40kN, retraction force: 60kN, feed speed: 9m/min, retraction speed: 9m/min, fast feed: 47m/min, fast retraction: 47m/min. Transport dimensions X/Y/Z: 6470mm/2200mm/2560mm, weight: 8500kg. Documentation available. Gkjdpfetpp Ifex Apwsa

Condition: used, machine/vehicle number: Mod 802 EI 48, Transformer lamination stacking machine EI 48 Gkedpfjyl Ad Usx Apwsa

Year of construction: 1991, condition: good (used), Hermle UWF 802 M machining center with Hermle HS control system. The machine is in good working order and ready for demonstration. Gkodsdubmkepfx Apwoa

Condition: used, Year of construction: 2023, Single lift el. Tandem axle and tires 10.0 set standard / wheels 10.0/7 CE equipment package Chassis number WAMTYGRBCPG0 Year of construction 202 / Gkodpfx Aotdfrgjpwoa

Condition: new, Year of construction: 2023, functionality: fully functional, 4x new high-efficiency inline pumps with EC motor Wilo Stratos GIGA 100/1-17/3.7. Gedpfsx Hg Uzsx Apweka All brand new, in original packaging and stored on pallets.

Condition: new, gearing type: other, color: black, suspension: air, driver cabin: other, Vehicle location: Bovenden Gigant trailer axle, 10-hole Air suspension Outer length: approx. 2,070 mm New, from old stock. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! Gkjdpfx Aoztx Auspwoa

Condition: used, gearing type: other, color: black, mileage: 1,001 km, suspension: air, driver cabin: other, Vehicle location: Bovenden Identification No. 703015816/YA17310063 GEKH2 10510 3020 1950 980 256 ABS AGS ID1- 15-175-19 Gkjdpfx Ajztrxpjpwsa ID2- 3020P1 ID3- 11772 ID4- 36100807 air suspension External length: approx. 2,220 mm ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: excellent (used), Strapping machine SIVORON / GIGANT Model S 669 L integrated strap reel belt width 6/ 9/ 12/ 15.5 mm Electrical connection 230 V, 50 Hz Adjustable belt tension Temperature welding system idle rollers in the work table Gksdpfx Apjuxm Hajwoa mobile with cord wheels Dimensions L x W x H = 1460 x 600 x 1600 Weight approx. 70 kg Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, For sale: Professional industrial pump from the renowned manufacturer KSB. The pump is in new condition (ex-stock/warehouse storage) – unused, with possible storage marks visible in the photos. ⚠️ Sale concerns the pump only – electric motor not included. ⚙️ TECHNICAL DATA Manufacturer: KSB Model: ETACHROM BC 80-250 / 1104 Year of manufacture: 2000 Capacity: up to approx. 160 m³/h Head: approx. H-14 Type: centrifugal pump Construction: single-stage Connections: flanged Design: industrial, heavy-duty 🔧 APPLICATIONS Water installations Industry Process systems Cooling Liquid circuits ✅ CONDITION New – stock item Unused Fully operational construction No motor included Godpfjywcq Tox Apwjka 📦 ADDITIONAL INFORMATION ➡️ Option to purchase an electric motor ➡️ Matching motor available – additional cost: €700

Condition: used, Engraving cutters, burin cutters, end mills, end mills, milling cutters -Incl. Packaging: 18 kg cutter Gkedpfxsb Iqgpe Apwja -different diameters -Material: HSS, SS, carbide, others -is only sold complete -Weight: 18 kg