Band Saw - Automatic - Horizontal

BERG & SCHMID K-tech DG 802

Condition: good (used), Well-maintained horizontal creel. Passage 1000 mm. Stroke 800 mm. Kedpfx Adjunhl Ujwoll Feed electronically adjustable. Clamping carriage approx. 7.5 m long with 5 hydraulic clamping jacks. Can still be inspected in operation.

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material Kledpfxsfg E Hpe Adwjl can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, Year of construction: 2025, Max Ø 114mm; Straight and bent round tubes; One grinding station; Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. Kledpfx Aot Eaw Djdwjl The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval and elliptical tubes. The ML planetary belt system allows belt grinding without rotating the tube to deliver the best results. The feed system safely feeds the straight tubes into the grinding station for a consistent and productive surface finish. ML100 Working capacity (Ø mm) 3 - 114 No. of stations 1 Sanding belt, dimensions (mm) (2x) 50x940 Sanding belt speed (m/s) 3-22 Sanding belts Motor (kW) 3 Wheel, motor (kW) 1.5 Total power (kW) 4.5 Power consumption (A) 11 Dust extraction connection (Ø mm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250

Condition: excellent (used), Year of construction: 2001, operating hours: 47,600 h, machine/vehicle number: 325, System: TX8H Spindle passage: 80 mm Turning length max: 750mm Ksdpfeh Dzqlox Adwoll Turning diameter: 340mm Power: 22kw Number of tool holders: 12 Shaft diameter: 40 Powered tools in all positions X axis Z axis C axis Automatic tailstock chip conveyor

Condition: good (used), Year of construction: 2001, Manufacturer: BEHRINGER Type: HBP 530 A Year of construction: 2001 Specifications: Metric Kljdpfju U Narsx Adwol Metric US Standard Capacity 90° 530 x 530 ° Min, saw length 40 mm Max. Saw length 17 - 110 Saw power 12 kW Chip conveyor Yes Dimensions (estimate) length 4000 mm width 2250 mm height 3270 mm weight 4400 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve Kledpfxjd Iipmj Adwsl • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: used, Year of construction: 2008, Used CMA drilling center Type: TRD 40 CN 9000 Ksdpfx Adewc Ndwswjll Table length: 9000 mm Maximum capacity: 40 mm Automatic tool changer Year of manufacture: 2008

Condition: used, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your is: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung: -WSS mit Konus MK5, optional mit Adapter MK5/Kurzkegel -RST mit MK4 Konus. Optional mit Feinverstellung -Schleifspindelstock T1/T2/T3 -T1 Schleifscheibendurchmesser 400mm -T2 Schleifscheibendurchmesser 300mm -T3 Innenschleifeinrichtung riemengetrieben. -Schleifspindelmotor 4,4kW -B-Achse hochauflösend -Marposs Messsystem zur Schleifscheibenvermessung. Kjdpfxjuwv H Tj Adwjll -Längspositionierung Marposs -GAP Control (Sensor am Schleifspindelstock) Optionen gegen Aufpreis: -HF Innenschleifspindel -Hochgenauer, höchst kippsteifer Werkstückspindelstock -Messteuerung Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Year of construction: 1993, condition: good (used), machine/vehicle number: 03.2370, Arthur Klink - internal broaching machine (WAG 748) Kjdscc D Ddepfx Adwoll machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 10 x 1000 built in: 1993 stroke: 1000mm pulling force: 10.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: machine under power in stock the machine has an automatic workpiece loading system for 2 workpieces, ideal useable for high production Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Condition: used, machine/vehicle number: 7979, Table Ø: 400 mm Kjdpfsb Ez R Ujx Adwjll Table with 8 T-slots: 12 mm Overall height: 175 mm Space requirement: 600 x 450 x 175 mm Weight: approx. 100 kg