Used Samag Samag Mfz 2-2 for sale (78,799)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, pressing force: 100 t, stroke length: 100 mm, throat depth: 400 mm, overall weight: 6,000 kg, working length: 3,000 mm, TECHNICAL DETAILS Axes: 5 Pressing force: 1,000 kN (100 t) Maximum bending length: 3,000 mm Distance between side supports: 2,600 mm Overhang: 400 mm Stroke: 100 mm Installation height: 370 mm Number of cylinders: 2 Rapid traverse: approx. 85 mm/s Working speed: 10 mm/s Return speed: approx. 80 mm/s MACHINE DETAILS Oil filling capacity: approx. 85 l Motor power: approx. 10 kW Hfjdpfx Ajzxnggsftjl Dimensions & Weight Dimensions (L x W x H): approx. 3,300 x 1,930 x 2,325 mm Machine weight: approx. 6,000 kg

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface Hfsdpfxjuxfu Ne Aftsl - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Hfjdpfx Ajvbdyfoftsl Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Stroke (mm): 150 Down Speed: 60 (mm/s) Up Speed ​​73.8 (mm/s) Working Area Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size ​ Height (mm) 987 Width (mm) 505 Depth (mm) 735

Condition: used, Year of construction: 2012, power: 110 kW (149.56 HP), Hargassner 110 kW – Biomass Boiler (Pellet / Wood Chip) – 2 Units Available, Cascade Operation Possible For sale is a Hargassner 110 kW fully automatic biomass boiler in a modern design (year of manufacture: 2012). ⚠️ 2 identical boilers available! ➡️ Ideal for cascade operation up to approx. 220 kW ➡️ High operational reliability and optimal performance modulation — Technical Data: • Year: 2012 • Output: 102–109 kW • Combustion output: up to 116.5 kW • Max. temperature: 95 °C • Max. pressure: 3 bar • Water volume: 190 liters Hodpfoy A Ei Nex Aftjfl • Weight: approx. 1010 kg — Key Features: • Fully automatic operation • Lambda sensor → automatic combustion control • Modulating output (demand-based adjustment) • Automatic cleaning and de-ashing • 3-pass boiler → high efficiency • Fireclay-lined combustion chamber → clean combustion • Automatic grate (self-cleaning) • Very low power consumption (~0.18 kW) • Modern, energy-efficient system — Feeding Technology / Equipment: • Incl. feed auger (standard equipment) • Currently equipped with an automatic pellet suction system (vacuum system/suction feed) ➡️ Very simple pellet operation: • Connection to pellet storage via flexible hose • System automatically draws pellets into the boiler • Fully automatic operation without manual feeding ➡️ Optional: Can also be used for wood chip operation (by connecting to a discharge system) — Condition: • Recently dismantled • Was fully operational until dismantling — Inspection: Viewings are possible by appointment at our 1,500 m² warehouse in Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used Heating Systems, Boilers, Heat Pumps & Accessories Direct from Stock We are a family business with around 20 years of experience in heating technology, boasting a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and about 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our inventory includes: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Feed augers • Discharge systems • Burners • Pumps • Extensive heating accessories ⚙️ Accessories and Components: Additionally, we have a wide range of accessories, including circulation pumps, plate heat exchangers and many other components – from small-scale applications to industrial-scale solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units that are not yet listed. 📅 Inspection: A viewing at our warehouse is possible by prior appointment. If you are interested, please contact us – we will help you find the right solution.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 4557182, overall weight: 57 kg, load capacity: 10 kg, arm reach: 901 mm, controller manufacturer: KUKA, controller model: KRC5 micro, We are offering this very well-maintained KUKA KR 10 R900-2 industrial robot and KRC5 micro controller, manufactured in 2022. Year of manufacture: 11/2022 Payload: 10 kg Reach: 901 mm Robot weight: 57 kg Including KRC5 micro controller Including complete robot cell as shown in the picture The system provides an excellent basis for a wide range of automation tasks, such as pick & place, machine loading, machine unloading, assembly, parts handling, sorting, inspection, measurement, packaging or singulation tasks. The robot or cell can also be sold separately! Hfodozzkg Uspfx Aftol Subject to prior sale and errors.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 13341-T, total width: 1,420 mm, total length: 1,576 mm, total height: 1,100 mm, overall weight: 2,000 kg, cooling capacity: 20 kW (27.19 HP), input voltage: 400 V, input current: 32 A, type of input current: three-phase, input frequency: 50 Hz, operating pressure: 10 bar, space requirement length: 1,800 mm, space requirement height: 1,800 mm, space requirement width: 1,500 mm, coolant tank capacity: 800 l, Equipment: cooling unit, The system was taken out of service a year ago due to a switch to a centralized system. One year before decommissioning, all TCF elements were replaced. We can provide support for recommissioning. Technical data: - Total filter capacity approximately 210 l/min - Filter fineness approximately 3 μm nominal - Tank capacity approximately 800 l - Designed for two hoppers WU305L/325L/105L including interface Equipment: - 3 filter groups, individually automatically backwashable, each with 2 TCF filter columns - 1 filter pump Hedszxhcnspfx Aftefl - 1 pneumatic unit - 1 automatic sludge treatment system via a settling tank and scraper conveyor - In-line cooling via the return flow from the filter columns to the clean oil area via the plate heat exchanger, including flow control in the chilled water circuit - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 2 pcs. machine supply pump for supplying the machine with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approximately 100 l/min - Delivery pressure: approximately 10 bar - Drive: 400V, 50Hz 2 pcs. drive cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approximately 30 l/min - Delivery pressure: approximately 6 bar - Drive: 400V, 50Hz 1 pcs. screwed plate heat exchanger with cooling control approximately 20kW Designed for cooling water 70 l/min, 13°C supply temperature.

Condition: good (used), Year of construction: 2013, functionality: fully functional, arm reach: 1,611 mm, For sale is a Kuka industrial robot, model KR 16-2. Hsdpfxszzacle Aftofl - 1x pedestal for the robot, height approximately 30cm - 1x KRC4 control cabinet - 1x KCP4 operator panel, 00-168-334 - Connection cables - Shipping is possible for an additional charge.

Condition: ready for operation (used), functionality: fully functional, Facing and centering machine KUHN KAZ 80-2 -Max. workpiece diameter / round 80mm -Max. workpiece diameter / square 60mm -Centering length / endless -Clamping unit with self-centering vice Hfsdpfxoz Aquuj Aftsl -Spindle drive 1.8 kW -Drill chuck -Chip tray -Connection cable -Forklift pocket for transport Dimensions: L x W x H 1.7 x 0.7 x 1.4 meters / Weight 600 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Graf Wet Blasting System Hedpfjztyzljx Aftofl Machine type: Wet blasting system Manufacturer: Graf Technik GmbH Type: Compact 2 Plus Year of manufacture: 2013 Control system: Siemens Origin: Germany Location: Albstadt Delivery time: upon agreement

Condition: like new (used), Year of construction: 2025, functionality: fully functional, overall weight: 59 kg, load capacity: 10 kg, arm reach: 1,101 mm, controller manufacturer: Kuka, For sale is a modern robotic cell with a KUKA industrial robot, model KR 10 R1100-2 / SEL, from the AGILUS-2 series. The system is in very good, like-new condition and is ideally suited for various automation, handling, assembly, or testing applications. The robot is installed inside a robust, fully enclosed safety cabin made of aluminum profiles with large, transparent protective elements. The cell features an integrated linear/positioning unit and a customer-specific gripper or tool mounting. Due to its compact design, the system can be easily integrated into existing production environments. Technical data of the robot: - Manufacturer: KUKA - Type: KR 10 R1100-2 / SEL - Series: AGILUS-2 - Year of manufacture: 03/2025 - Payload: 10 kg - Reach: 1,101 mm - Robot weight: 59 kg - Article number: 0010028076 - Serial number: 4613832 - Origin: Germany The offered unit includes the robotic cell shown in the pictures, including the robot, enclosure, and the mechanics or peripherals installed within the cell, as depicted in the images. The system is suitable, for example, for pick-and-place applications, machine loading, parts handling, assembly, testing, and sorting tasks, as well as a basis for customer-specific automation projects. Condition: very well maintained / like new Year of manufacture of the robot: 2025 Inspection: possible by appointment. Hjdpszznzijfx Aftefl Subject to prior sale and errors.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, rotor diameter: 600 mm, rotor width: 1,000 mm, year of last overhaul: 2026, Shredding mill, heavy-duty version Manufacturer: NEUE HERBOLD, D-74889 Sinsheim Drive: 75 kW Hopper: Conveyor belt hopper Working width: 1000 mm Rotor diameter: 600 mm Hsdpfjz Ak A Ejx Aftjfl Year of manufacture 2015, fully overhauled with - new rotor - new hopper - new base frame Examples of applications: Shredding of solid lumps, start-up blocks, profiles, beverage crates, boxes, vegetable crates, etc.

Condition: like new (used), Year of construction: 2019, operating hours: 20 h, functionality: fully functional, overall weight: 1,069 kg, load capacity: 120 kg, arm reach: 2,701 mm, controller manufacturer: KUKA, controller model: KR C4, teach pendant manufacturer: KUKA, teach pendant model: KUKA SmartPAD, warranty duration: 12 months, Equipment: documentation/manual, KUKA KR 120 R2700-2 with KR C4 – AS NEW / only 19.95 operating hours We offer a KUKA KR 120 R2700-2 industrial robot in as-new condition with KUKA KR C4 controller. Manufactured in 03/2019 with only 19.95 operating hours. Robot specifications - Model: KUKA KR 120 R2700-2 - Payload: 120 kg - Reach: 2701 mm - Year of manufacture: 03/2019 - Operating hours: 19.95 h - Cable set: INT 084ST2700 - Configuration: ES13 133 CTR MB1 PNT EPS AIR - Colour: KUKA Industrial Orange Controller - KUKA KR C4 EU Hsdpfx Aozyyynsftofl - KSS 8.5 - Servo configuration SC4.1 - 400 V transformerless power supply - Siemens SCALANCE X208 - Parallel Safety interface X11 - Ethernet interface X66 - CSP 2x USB 3.0 - Cabinet base with spacer - Set of 75 mm rollers Installed KUKA software & technology packages - KUKA.PROFINET M/S 4.1 - KUKA.DiagnoseSafety 3.0 The robot is supplied with the complete configuration according to the attached technical specification. 12-month warranty included. CUSTOM CONFIGURATION AVAILABLE The robot can be supplied in its current configuration or customized according to the customer's application and technical requirements. Depending on the application, RSA Systems can provide configuration and installation of suitable KUKA software and technology packages, communication interfaces and fieldbus systems, as well as configuration for external axes and other application-specific requirements. Additional services available on request Installation & commissioning | Programming & optimization | Integration & automation | Custom robot configuration | Technical support | ISO 9283 metrology & calibration | KUKA robot training Inspection and functional demonstration of the robot at our facility is possible by appointment. Send us your application and technical requirements and we can prepare the robot configuration according to your project. RSA Systems s.r.o. Experience. Reliability. No Compromise.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 10006472, total height: 2,200 mm, overall weight: 900 kg, space requirement length: 1,800 mm, space requirement width: 100 mm, Filter and extraction unit with automatic cleaning. Suitable for smoke extraction during laser, plasma, and oxy-fuel cutting, blasting, welding, grinding, and powder coating. Year of manufacture: 2020 Model: 10124806 Serial number: 10006472 Motor: 4 kW - 400 V Number of filter cartridges: 2 Raw gas inlet: 200-250 mm Hfjdpfx Aszwxaneftol Raw gas outlet: 300 mm Width x Depth x Height: 1,200 x 1,800 x 2,200 mm Weight: 900 kg Note: No warranty, installation, commissioning, and transport are included. Subject to prior sale.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12790-T, total width: 1,400 mm, total length: 1,560 mm, total height: 1,100 mm, overall weight: 2,000 kg, input voltage: 400 V, input current: 32 A, type of input current: three-phase, input frequency: 50 Hz, operating pressure: 10 bar, space requirement length: 1,800 mm, space requirement height: 1,800 mm, space requirement width: 1,500 mm, coolant tank capacity: 800 l, The system was decommissioned one year ago due to a switch to a central system. One year before decommissioning, all TCF elements were replaced. In 2018, the filter elements in the sludge treatment system were upgraded to a more modern and process-reliable extraction system. Cooling was implemented via an on-site control system, including a chilled water unit. The cooling pump (oil side) is still present and installed. Should you require assistance with the design of the cooling system, we would be happy to support you. We can also assist with a restart on-site, if required. Technical data: - Total filter capacity approx. 210 l/min - Filter fineness approx. 3 μm nominal - Tank volume approx. 800 l - Designed for two hoppers WU305L/325L/105L including interface Equipment: - 3 filter groups, individually automatically backwashable, each with 2 TCF filter cartridges - 1 filter pump - 1 pneumatic unit - 1 automatic sludge treatment system consisting of a sedimentation tank and a scraper conveyor - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, Hodpfxszxn Nns Aftofl operation and parameterization via touch panel 1 pcs. Variable speed machine supply pump for supplying the machines with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approx. 200 l/min - Delivery pressure: approx. 10 bar - Drive: 7.5 kW, 400 V, 50 Hz with frequency inverter - Pressure sensor for constant coolant pressure, independent of the draw at the machine, included 2 pcs. Drive cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 30 l/min - Delivery pressure: approx. 10 bar - Drive: 400 V, 50 Hz 1 pcs. Cooling pump Brinckmann TA400/550 380 l/min 2m Drive 400 V, 50 Hz, 0.85 kW 2 pcs. Shut-off valve 5/4" NC for coolant supply lines closing against the media flow as a shut-off valve between the machine and the central supply line.

Condition: good (used), functionality: fully functional, machine/vehicle number: E9-00274, For sale is a Daewoo G50SC-2 forklift with a gas-powered engine and side shifter. The forklift is in perfect working order. The last inspection was carried out in 2023. Technical data and equipment: • Manufacturer: Daewoo • Model: G50SC-2 • Engine: Gas / LPG • Rated load capacity: 5,000 kg • Load capacity with mounted attachment according to the nameplate: 4,550 kg at a 500 mm load center and 3,650 mm lifting height • Side shifter • Operator protection roof with weather protection • Windshield with windshield wiper • Work lights • Mount for two gas cylinders The forklift is in used condition with typical signs of wear and tear. Suitable for material handling, warehousing, and loading/unloading operations. Inspection and demonstration are possible by arrangement. Hfjdsz Apf Sjpfx Aftol Location: Quickborn (25451) near Hamburg, close to the Quickborn highway exit. If you are interested or have any questions, please do not hesitate to contact me.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 178501, turning length: 1,000 mm, travel distance X-axis: 280 mm, travel distance Z-axis: 700 mm, total height: 2,000 mm, total length: 5,000 mm, total width: 2,200 mm, overall weight: 5,000 kg, controller manufacturer: OKUMA, controller model: OSP-P 300 L, input voltage: 400 V, input frequency: 50 Hz, input current: 154 A, nominal power (apparent): 29 kVA, Equipment: chip conveyor, OKUMA LB 3000 EX 2 - M C 1000 CNC lathe - includes driven tool stations and a C-axis The machine is equipped with a tailstock, a 12-position tool turret, and a three-jaw chuck, diameter: 250 mm, manufacturer KITAGAWA, including a chip conveyor. Hfjdpfx Afjzxyd Dstel FCA D-63843 Niedernberg

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Pressure 6 bar, Pump capacity 80 m3/h , el.mootor 18,5 kW, 1470 rpm, 34,7 A. Quantity 7 psc. Hjdpfx Afez A Au Rstofl

Condition: repair required (used), functionality: not functional, Year of construction: 2014, Paper Spike 2 G, typ 2000, Dimensions of machin 2850 x 2350 x 2000mm (L x W x H). weight 2800 kg Hfsdpfx Aszzzq Rsftel

Condition: excellent (used), Year of construction: 2014, We are offering for sale these two Bosch UL-S 14000 steam boilers, which are in very good condition. They were manufactured in 2014. Hodpfozg Nt Dox Aftefl Manufacturer: Bosch Type: UL-S 14000 Year of manufacture: 2014 If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), functionality: fully functional, total height: 2,400 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,600 kg, Equipment: documentation/manual, An Emco PCT 345/2 machine is for sale. The machine is in good condition and is being sold due to the purchase of a new machine. A tailstock is included. No quick-change tool holder or hollow-bore chuck is included. Location: 45209 Hedjzzkgbepfx Aftjfl The machine has always been well-maintained and is fully functional. The main drive belt and sensor were recently replaced. The machine is available immediately.

Year of construction: 2017, condition: refurbished (used), functionality: fully functional, Beton2Go self-service system – MA15-2 concrete mixing plant – extensively refurbished and ready for immediate use. We are selling our Beton2Go system due to the purchase of a new one. Technically in very good condition and extensively overhauled. Ideal for a quick start or expansion. Technical data: Year of manufacture: 2017 Capacity: approx. 15 m³/h 0.5 m³ per batch Cement silo with level measurement (online compatible) Operation with retarder possible Self-service with cards (EC format) Refurbishment: Mixing plant: • HMI touch screen renewed • Relays partially new • Wiring new (CEE, industrial plug, network) • Emergency stop and safety switches new • Sensors + mixer flap bearings new • Closure for mixer cover new • Hardox plates: 4/8 renewed (bottom), top in good condition • Belt rollers inspected/repaired • De-rusted, partially sandblasted and painted • Mixer arms repaired, mixer shoes new • Gear oil changed, lubricated • Dust seals + various small parts new Conveyor belt: • Rollers partially new • V-belts new • Gear oil new • De-rusted and painted Hfodezlpv Ajpfx Aftjl • Hopper seals new Cement silo: • Wiring new • Filter cleaned • Industrial plug retrofitted • Cleaned externally UVV and DGUV V3 inspection and certification performed before handover. Ready for immediate use, no backlog of investments. Scope of delivery: Mixing plant, conveyor belt, 2x IBC (water + admixture), 2x pumps, spare parts, inspection booklet Requirements: 64A power supply, optional network (VNC remote maintenance) Inspection possible. Transport can be arranged. Price net plus VAT.

Condition: used, functionality: fully functional, machine/vehicle number: 24423, turning length: 200 mm, turning diameter: 210 mm, spindle motor power: 11,185 W, spindle speed (min.): 40 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 58 mm, travel distance X-axis: 178 mm, travel distance Z-axis: 203 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, type of input current: three-phase, feed length X-axis: 178 mm, feed length Z-axis: 203 mm, bar passage: 58 mm, total height: 1,800 mm, total length: 2,300 mm, chuck outer diameter: 203 mm, total width: 2,700 mm, bar diameter (max.): 58 mm, spindle nose: A2-6, overall weight: 8,000 kg, spindle diameter: 203 mm, working range: 200 mm, Equipment: rotational speed infinitely variable, Okuma & Howa ACT-2SP-2 CNC lathe with two parallel spindles, equipped with an Okuma OSP5020L numerical control system. The machine features two hydraulic self-centering chucks and two independent tool turrets, enabling the simultaneous machining of two workpieces. Key features: Hodpfx Afszpd Aletofl Turning diameter: approximately 210 mm Turning length: approximately 200 mm Chuck diameter: approximately 203 mm Chuck bore: approximately 58 mm X-axis travel: approximately 178 mm Z-axis travel: approximately 203 mm Spindle speed: approximately 40–4,000 rpm Spindle power: approximately 11 kW per spindle CNC control: Okuma OSP5020L Serial number: 24423 Chip conveyor/extractor included The machine is complete with all its main components, currently not in operation and requiring functional testing. Sold as is. Loading onto the transport vehicle will be handled by the seller. Transportation costs remain the responsibility of the buyer. The machine can be inspected at our facility.

Year of construction: 2022, operating hours: 1,861 h, condition: excellent (used), functionality: fully functional, For sale is a Rösler wheel processing system, type FBA 24/2 Turbo. This system was specifically developed for the needs of professional wheel processing and, thanks to two laterally arranged unbalance motors, enables flawless results with short processing times. The stepless speed control and adjustable motor position allow the system to be flexibly adapted to almost any processing task. The compact wheel processing system is ideal for pre-grinding, fine-grinding, and polishing of standard and custom wheels up to 24 inches. Thanks to easy operation and quick abrasive change, wheels can be polished to a mirror finish in just a few hours – for a high-quality mirror finish in an elegant metallic look, both for used and new wheels. The pneumatic loading and unloading system makes loading and unloading the wheels very easy and quick. In addition to wheels, other components can also be processed here. The working container is equipped with a flexible clamping device for different wheel types and is lined with a high-quality wear-resistant lining made of polyurethane elastomer (Rösler HD 90). The specially ribbed, stress-relieved, annealed welded construction ensures a long service life and smooth, robust operation even in continuous operation. Application areas: High-gloss polishing of wheels of all types (automotive and motorcycle) up to 24 inches Aluminum, cast, and forged wheels Polishing of other engine components Refurbishing of components, e.g., from the classic car sector or the aerospace, defense, etc. industries Technical specifications: Manufacturer: Rösler Oberflächentechnik GmbH Type: FBA 24/2 Turbo wheel processing system Working container: Inner diameter 700 mm, container depth 550 mm Hsdpfx Aszw A Rweftofl Wear-resistant lining: high-quality polyurethane elastomer, Rösler HD 90 Design: durable, specially ribbed welded construction, stress-relieved, annealed Motors: 2 special unbalance motors designed for continuous operation Speed: 3,000 rpm, steplessly adjustable via frequency converter Automatic reversing of direction of rotation Various programs can be stored in the Siemens PLC control system, thus achieving reproducible results. An automatic program sequence guarantees a low error rate for the operator. We have a total of over 80 vibratory finishing systems in stock; please contact us for all your vibratory finishing needs.

Condition: used, Year of construction: 2017, functionality: fully functional, turning length: 500 mm, turning diameter: 255 mm, spindle bore: 63 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 50 rpm, spindle motor power: 10,800 W, rotational speed (min.): 50 rpm, rotational speed (max.): 5,000 rpm, type of input current: AC, bar passage: 63 mm, bar diameter (max.): 51 mm, We are offering this used ACE Designers LT-2 XL 500 ELITE CNC lathe, model year 2017. Machine type: LT-2 XL 500 ELITE Machine number: 939 Year of manufacture: 2017 Supply voltage: 400/415 V AC Control voltage: 24 V DC Safety fuse: 63 A Rated current: 29 A Rated power: 21 kVA Conductor cross-section: 10 mm² The machine is in good condition, regularly maintained, and ready for operation. Basic specifications: Control system: Siemens SINUMERIK 828D Max. turning diameter: 255 mm Max. turning length: 500 mm Diameter through the spindle: 63 mm Max. bar diameter: 51 mm Spindle speed: 50 – 5000 rpm Spindle power: 10.8 kW Equipment: 12-position turret programmable tailstock with rotating tip part catcher chip conveyor tool measuring arm 3D program simulation Hfsdpfx Afjztpxyetel The machine is reliable and suitable for series or individual production. If you have any further questions or require more information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.5 kW (12.92 HP), cutting height (max.): 260 mm, cutting width (max.): 260 mm, total height: 2,130 mm, total length: 1,670 mm, total width: 2,080 mm, overall weight: 2,200 kg, table height: 950 mm, Equipment: documentation/manual, lighting, A fully hydraulic production band saw machine, with a vertically running saw band, for 90° cutting of profiles, thin-walled and solid materials in all grades, including hard-to-machine materials such as Titanium, Hastelloy and Inconel. The standard Kasto Basic Control system provides optimal machine operation. Up to 99 programs can be programmed (length/quantity combinations). After the specified number is reached, the machine automatically shuts down. Precise material length positioning of the material feed unit via a ball screw. Frequency-controlled drive 5.5 kW, 0-start, protection in case of band saw breakage and clamping force control are part of the standard equipment and guarantee perfect operation for both single cuts and small to medium-sized series. The KASTO Universal Hydraulics ensures the best cutting results and a long service life of the band saw. Suitable for use with bi-metal and carbide band saws. Cutting capacity, round [mm] 260 Cutting capacity, square [mm] 260 Cutting capacity, bundle width [mm] 150-260 Cutting capacity, bundle height [mm] 0-200 Hfjdszz Ih Njpfx Aftjl Smallest cutting dimension [mm] Ø 10 Smallest cutting short length [mm] 5 Clamping range [mm] 0-260 Length [mm] 1,670 Width [mm] 2,080 Height [mm] 2,130 Bed height [mm] 950 Weight [kg] 2,200 Total drive power [kW] 9.5 Power of saw motor [kW] 5.5 Automatic material feed length, single [mm] 600 Maximum material feed length [mm] 9,999 Minimum remaining piece length during manual operation [mm] 10 Minimum remaining piece length in automatic operation [mm] 110 Cutting speeds (infinitely adjustable) [m/min] 15  125 Cutting feed infinitely adjustable Material clamping hydraulic, infinitely adjustable Saw band guidance by carbide, replaceable Clamping force: Horizontal main clamping clamp (Sp I) [N] 1,100  6,800 Horizontal material feed clamping clamp (Sp II) [N] 1,100  6,800 Saw band dimensions [mm] 4115 x 41 x 1.3