Used Sirio Sirio Panel Loading - Loader for sale (38,287)

Condition: used, machine/vehicle number: 008514, Max. panel width: 4250 mm Max. panel length: 4300 mm Nwodjy Edn Aopfx Ab Ujl Main saw blade projection: 95 mm No of Grippers: 7 Second flexible pusher: yes

Condition: used, maximum load weight: 1,950 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 2,010 mm, loading space height: 115 mm, total width: 2,540 mm, total height: 500 mm, A25 GW26NG000031 Car transport trailer, manufacturer STEMA, type FTAK 27-40-21.2, Gross weight: 2,700 kg, with overrun brake, WAP901 hand winch, low loader, hydraulically tiltable. Main frame: Extremely sturdy and torsion-resistant with crash-tested safety V-drawbar. Tiltable, robust frame construction with safety locks. All frame parts are hot-dip galvanized for corrosion resistance. Running rails: Extra wide, perforated, non-slip running rails made of galvanized sheet with large elongated holes for secure fixing of tie-down straps. The extra-wide track allows easy transport of vehicles with different wheelbases. Integrated drive-on ramps facilitate easy loading and unloading. Side panels: Signal red powder-coated (corrosion-free and scratch-resistant) for enhanced safety. Vehicle not reconditioned ...and much more. Nwjdpjyn Ucbofx Ab Uol Errors and prior sale reserved.

Condition: good (used), Year of construction: 2014, Baumann EFQ50LL/12/50, 5-ton side loader – used: Price at our location: only €14,950.00 (net)! Manufacturer: Baumann Type: EFQ50LL/12/50 Year of manufacture: 2014 Serial number: 8539-2014 Nwedpfx Abjzxcgze Ujl Current operating hours: can be provided upon request. In 2020, when the customer purchased the machine, it had 9,400 hours; it has been used relatively little since then. Own weight: 9550 kg Load capacity: 5000 kg Drive: Electric Lifting height: 4960 mm Mast: Duplex Tires: 250-15 SE Overall height: 3345 mm Length: 4550 mm Width: 2200 mm Forks: 1180 x 150 x 60 mm Motor: Battery, 3 units, 80 volts, 1200 x 290 x 630 mm Cab: Full cabin Charger New battery in 2022 (€9,500.00), 80V 7HPZS 875Ah Condition: used Available: immediately Location: Hockenheim

Condition: ready for operation (used), Year of construction: 2011, A diesel side loader from the manufacturer Bulmor (formerly Jumbo) is available. Load capacity: 7000kg, load center: 700mm, lifting height: 4500mm, mast type: duplex, free lift: 1540mm, engine power: 74.5kW. Machine dimensions X/Y/Z: approx. 2250mm/5000mm/3000mm, weight: approx. 11000kg, operating hours: approx. 22300h. An on-site inspection is possible. Nwedpezcp Ubjfx Ab Uol

Condition: used, machine/vehicle number: 005106, Max. panel width: 4300 mm Max. panel length: 4250 mm Main saw blade projection: 95 mm Nwjdpfxjyg Edme Ab Ujl

Condition: used, machine/vehicle number: 005685, Max. panel width: 1200 mm Max. panel length: 3200 mm Max. panel stack height from the ground: 1600 mm Lifting capacity: 100 Kg Nwjdpjyg Ec Njfx Ab Ujl Movement system: suction cups.

Condition: new, maximum load weight: 92,045 kg, overall weight: 1,26,000 kg, axle configuration: > 3 axles, Equipment: ABS, Excerpt from the equipment list Complete equipment upon request * 1 x Gooseneck MAX710-Neck-V-30-2.70 * Gooseneck with hydraulic lifting/lowering and extendable function * Length approx. 3,650 mm. For SZM 6x4 or 8x4 * Steel front panel, approx. 400 mm high * Plug-in aluminum side and rear panels on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Incl. gantry for suspending the supply lines * The SZM tank must contain at least 80 l with MAX trailer couplings, otherwise the customer must provide the couplings ex works * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2 * TPMS tire pressure monitoring system * Two toolboxes INOX, approx. 855 x 340 x 390 mm, on the gooseneck, left and right (± 48 kg) * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Hydraulic connection lines between the power pack and the connection plate on the gooseneck * Radio remote control: operation of the power pack, start/stop of the diesel engine * Operation of the trailing axle, in addition to the cable remote control * with 2 LED indicator lights on the receiver for single-lane operation * Operation of raising/lowering the gooseneck * Operation of raising/lowering the suspension of the axle assemblies * Multicoupling hydraulic connections on the gooseneck * 1 LED work light, left and right, on the rear panel of the gooseneck, with separate on/off switch * Four warning boards, extendable by ± 2,000 mm, approx. 423 x 423 mm, with an LED position light and a mounting for a rotating beacon. (± 122 kg) * 1 x 3-axle compact front axle * MAX710 axle PA-F-3-19.5-1.36-2.85 * Hook connection at the front and rear * Length: approx. 3,560 mm * Axle width: approx. 2,850 mm * Front axle with a separate air connection for air suspension * BEKA-MAX central lubrication system for a 3-axle axle assembly with standard grease NLGI-2. * A 7-pole socket, left and right, at the rear of the front axle for the warning boards * TPMS tire pressure monitoring system according to ECE R 1411 * LED work lights, left and right, at the rear of the front axle with a separate on/off switch * Surface of the front axle with a sand-coated paint finish for slip resistance * Multicoupling hydraulic connections on the front axle * 1 x Low loader bridge: MAX710-Low-loader-BB-A-7.15-(430)-2.85 Nwedpfxszzhfnj Ab Usl * Telescopic low loader bridge BB-A with drivable bridge hooks at the front and a bolt-on coupling at the rear * Basic width: approx. 2,850 mm Length: approx. 7,150 mm * Beam height: approx. 430 mm Beam width: approx. 1,350 mm * Loading height approx. 580 mm with ground clearance approx. 150 mm * 6 pairs of steel chequered plate with rubber matting approx. 1,000 mm, 1 pair approx. 500 mm (± 1,660 kg) * Possibility to screw in (ø approx. 40 mm) every approx. 500 mm on the outside of the top chord of the outer tube of the low loader bridge for screw rings (LC 16,000 daN) * Possibility to screw in M30 every approx. 1,000 - 1,200 mm on the outside of the inner tube of the low loader bridge for mounting screw rings (LC 10,000 daN) * Folding widening extensions with steel chequered plate, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * TPMS tire pressure monitoring system * Pair of loose HeProLen plastic wheel chocks with climbing strips approx. 1,200 x 450 x 50/400 mm. (± 130 kg) * 2 pairs of screwable lashing rings M30 (LC 12,000 daN). (± 13 kg) * Ce

Condition: used, Year of construction: 1998, operating hours: 6,120 h, Equipment: all wheel drive,

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 9,871 h, load capacity: 5,000 kg, lifting height: 6,040 mm, free lift: 870 mm, fuel type: electric, mast type: simplex, construction height: 4,030 mm, fork carriage width: 1,760 mm, fork length: 1,620 mm, empty load weight: 10,694 kg, total length: 4,200 mm, drive type: Elektro, construction width: 2,770 mm, Four-way side loader Load center: 800 Fork width: 200 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid tires Front tire size: 660/250-480 Rear tire type: Solid tires Rear tire size: 413/178-285.8 Nwsdpez Evtfefx Ab Ujl Battery voltage: 80V Battery capacity: 775Ah Battery year of manufacture: 2017 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website – sago-online. Lease-purchase and financing options are available at favorable terms. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this 50/18/60 STC8.5. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom fabrication for forklifts starting from 8 tons. We would also be happy to offer your vehicle for consignment sale at our facility. Fork positioner, Platform height: 530 mm

Condition: used, machine/vehicle number: 008186, Max. panel width: 3200 mm Max. panel length: 3200 mm Main saw blade projection: 110 mm No of Grippers: 11 Nwsdpoxaudzofx Ab Ujl

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 7783, Year of construction: 2010, operating hours: 13,980 h, load capacity: 6,000 kg, lifting height: 6,000 mm, free lift: 2,000 mm, fuel type: diesel, mast type: triplex, construction height: 2,800 mm, motor manufacturer: Perkins, gearing type: other, fork carriage width: 1,500 mm, fork length: 1,400 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 80 %, front tire type: pneumatic tires (air-filled), rear tire type: pneumatic tires (air-filled), total height: 2,800 mm, total length: 4,800 mm, total width: 2,200 mm, color: red, Equipment: UVV, cabin, full service history, lighting, trailer coupling, We offer this ready-to-use Baumann DFQ 60/14/60 side loader; 6 tons; triplex mast, manufactured in 2010. Manufacturer: Baumann Model: DFQ 60/14/60 Year of manufacture: 2010 Condition: ready for use Load capacity: 6 t Mast type: triplex mast Nwedpfezkr D Tex Ab Ujl If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 1992, operating hours: 6,254 h, Wheel loader ZL 1801 with original 6,254 operating hours Rotating beacon at the front and rear Road approval 94 kW / 128 hp Front axle load 7,000 kg Rear axle load 6,000 kg Wheel loader in good overall condition, fully functional. No liability for typographical or data transmission errors. Subject to errors and prior sale. Daily cash purchase of used commercial vehicles, construction machinery, trailers and semi-trailers from the year 2000-2026. Nedpjzahgqsfx Ab Ujwl Nationwide delivery possible.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 10,649 h, load capacity: 7,000 kg, lifting height: 5,000 mm, free lift: 1,250 mm, load center: 700 mm, fuel type: diesel, mast type: duplex, construction height: 3,750 mm, motor manufacturer: PERKINS, fork carriage width: 1,500 mm, fork length: 1,400 mm, fork width: 200 mm, fork thickness: 70 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 10.00-20 SE, rear tire type: superelastic tires (black), rear tire size: 10.00-20 SE, overall weight: 19,400 kg, empty load weight: 12,400 kg, total height: 3,400 mm, total length: 5,000 mm, total width: 2,300 mm, color: yellow, Equipment: cabin, lighting, pallet forks, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 📌 Years of experience | 🛠️ In-house service & paint shop | 💼 Professional consultancy | 🚚 Own transport | 🤝 After-sales support Looking for a forklift you can truly depend on? We are an established dealer of new and used forklifts with a longstanding tradition. We serve clients throughout Europe – from small companies to major international industrial facilities. Our forklifts are more than just machines – they are a guarantee that your logistics will operate smoothly and reliably. ⭐ What sets us apart? ✅ Every forklift undergoes a thorough technical inspection (servicing, testing, filter and oil replacement, refurbishment of main components) ✅ Full safety inspection (UDT) available on request ✅ In-house paint and service workshop – machines perfected aesthetically and technically ✅ Europe-wide transport – performed with our own fleet and trained drivers ✅ Operator training at delivery + practical on-site demonstration ✅ After-sales service & technical support – support continues after the sale ✅ Possibility to visit & test the machine at our premises – you are welcome! ✅ Hundreds of satisfied customers across Europe – join those who already trust us ✅ Financing assistance – we cooperate with most leasing companies ✅ Invoice in EUR or PLN – as per customer preference 🔹 Current Offer: BAUMANN GS 70/14/50 – 7 T Side Loader Nwedpfezpidujx Ab Uol 📅 Year of manufacture: 2007 ⏱️ Operating hours: 10,649 h ⚡ Power: Diesel 🏋️ Capacity: 7,000 kg – load centre 700 mm 🗜️ Mast: Duplex – 5000 mm 🔧 Forks: 1200 mm 🛞 Superelastic tyres: 100% condition 🛠️ Technical condition: Excellent – after full service ✨ Visual condition: Well-maintained, rust-free, ready for work 📏 Free lift: 1250 mm Dimensions: 📐 Truck height: 3400 mm 📐 Total length: 5000 mm 📐 Width: 2300 mm 📐 Fork positioner width: 1500 mm 📐 Overall height: 3750 mm 🏭 Ideal applications: Warehouses with narrow aisles Wood, steel, and pipe industries Handling of long goods Both indoor and outdoor operations

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Hydraulically Lowerable Equipment: - Low loading platform - 10 lashing points - Shock absorbers + 100 km/h approved Net: €3,359.66 / Gross: €3,998.00 Article number: UNA114261515.01 Technical data: • Brand: Unsinn • Model: UA 2615-7-13 • Vehicle type: Lowering trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 260 x 155 x 15 cm • External dimensions (L x W x H): 403 x 205 x 78 cm • Loading height of the floor: 46 cm • Permissible total weight: 1,400 kg • Unladen weight: 370 kg • Payload: 1,030 kg • Chassis: Low loader (wheels beside the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Body made of sturdy steel profile, 3-sided, galvanized and powder-coated in black-gray (RAL 7021) • Continuous ramp enables driving onto the platform across the entire width • Attachment points at all corners for e.g. tarpaulin frame • Foldable license plate holder • Sturdy plastic mudguards • 8 foldable lashing points in the side wall profile • 1 lashing point in the end wall profile • 1 lashing ring on the loading platform at the rear, in the center • Reinforced, automatic support wheel for safe parking of the loaded trailer • Made of multi-layer glued screen printing plate, 18 mm, continuous without joints, non-slip and waterproof • Angle of approach in the lowered state approx. 6° Nwsdpezy A I Isfx Ab Usl • License plate holder at the rear, can be swiveled away for loading • Reversing automatic • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any desired options! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: good (used), axle configuration: 2 axles, first registration: 02/1968, color: blue, Year of construction: 1968, Rear axle 1: Double wheels Rear axle 2: Double wheels Empty weight: 7.325 kg Carrying capacity: 24.675 kg GVW: 32.000 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information Nedpfx Absz Dw D No Ujwl Fruehauf / Hydraulic Ramps / 32 Ton

Condition: used, machine/vehicle number: 007618, Max. panel width: 4400 mm Max. panel length: 4400 mm Nwedpfx Absu N Slio Ujl Main saw blade projection: 75 mm No of Grippers: 7

Condition: excellent (used), Year of construction: 2003, I sell the panel beam saw HOLZMA HPL11/43/22. Year 2003. Cutting size 4300x2200mm + back loading table. Cutting height 125mm. Total area covered W.7060mm x D.9490mm 7 pcs. gripper with pneumatic regulation Side alignment bottom pad with pneumatic stroke. CE conformity and optimising software included. Nwedpfszkb T Dox Ab Uol Very good condition. Available immediately.

Year of construction: 2022, condition: new, Layout: Round bale grab Nedpfxsn Tm Nkj Ab Uowl Carrying capacity: 3.000 kg Attachment suited for: Agricultural machines Galen bale spear is produced to load your hay bales from 200 kg to 4000 kg from the ground to a trailer, truck, or stack them on your farm. As Galen we produce hay spear for telehandlers, tractor rear and front loaders, excavators and any other loaders that you requsted.

Condition: used, machine/vehicle number: 007965, Max. panel width: 1300 mm Max. panel length: 2500 mm Max. panel stack height from the ground: 1600 mm Nsdpfx Ajw Ic Ryob Uswl Lifting capacity: 50 Kg Work capacity: 8 Cycles/min Movement system: suction cups.

Condition: used, machine/vehicle number: 008113, Max. panel width: 3800 mm Nodpfx Asw Iddhsb Ujwl Max. panel length: 3800 mm Main saw blade projection: 75 mm No of Grippers: 8

Condition: new, functionality: fully functional, This listing is for informational purposes only and does not constitute a legally binding offer. The KINGWAY SS23 model is a modern mini compact track loader with skid steer, designed for efficient operation in challenging terrain and confined spaces. Thanks to its compact design and high maneuverability, the SS23 is ideally suited for construction, landscaping, and municipal work. Equipped with a powerful Rato 740 engine delivering 16.8 kW and air cooling, the machine ensures reliability and stable performance at maximum speeds up to 3600 rpm. The operating load of up to 220 kg and a bucket capacity of 0.12 m³ guarantee efficient handling of bulk materials, while a working height of up to 2450 mm allows for effective loading and unloading. Nodpfxjyk Ei Ds Ab Uowl The KINGWAY SS23 is a dependable solution for professionals seeking a compact yet powerful machine that offers functionality, durability, and low operating costs. TECHNICAL DATA: Operating weight: 905 kg Bucket capacity: 0.12 m³ Travel speed: 0–3 km/h Max. rated load: 220 kg Max. working height: 2450 mm Max. pin height: 1800 mm Max. unloading height: 350 mm Reach at max. unloading height: 840 mm Wheelbase: 690 mm Ground clearance: 120 mm Bucket dump angle: 20° DIMENSIONS: Bucket width: 812 mm Overall length: 2330 mm Overall width: 820 mm Chassis width: 810 mm Overall height: 1420 mm Turning radius: 1400 mm ENGINE: Engine brand: RATO Model: 740 Max. power: 16.8 kW Max. speed: 3600 rpm Cooling: Air cooled Engine oil capacity: 1.7 l Fuel type: Petrol TRACKS: Rubber tracks (Width x Pitch x Number of links): 200 x 72 x 32 TANK CAPACITY: Fuel tank: 18 l Hydraulic oil: 30 l PRICE: €5,500 net €6,545 gross Brand new, year of manufacture: 2025 Delivery available

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Hydraulically Lowerable Equipment: -Low loading platform -8 lashing points -Tilting loading platform Net: €1,890.76 / Gross: €2,250.00 Article number: UNA175261515.01 Technical data: • Brand: Unsinn • Model: UA 2615-7-13 • Vehicle type: Lowering trailer • Vehicle condition: New vehicle Nodpfx Abjzy Anhj Uowl • First registration: without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (L x W x H): 260 x 155 x 15 cm • External dimensions (L x W x H): 403 x 205 x 78 cm • Loading height of the floor: 31 cm • Perm. gross weight: 750 kg • Unladen weight: 235 kg • Payload: 515 kg • Chassis: Low loader (wheels beside the body) • Tires: 175/70R13 • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Yes DESCRIPTION • Body made of sturdy, galvanized steel profile and powder-coated in black-grey (RAL 7021) on 3 sides • Continuous ramp allows driving up over the entire width of the loading platform • Attachment options at all corners for e.g. tarpaulin frame • Foldable license plate holder • Sturdy plastic fenders: • 8 foldable lashing points in the side wall profile • 1 lashing point in the front wall profile • 1 lashing ring on the loading platform at the rear in the middle • Reinforced, automatic support wheel for safe parking of the loaded trailer • Made of multi-layer glued screen printing plate, 18 mm, continuous without joints, non-slip and waterproof • Approach angle in lowered condition approx. 13° • License plate holder at the rear, can be swiveled away for loading • 100 km/h manufacturer approval • Reversing aid • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any desired additions! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Subject to errors, omissions and prior sale -

Condition: used, machine/vehicle number: 006211, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 135 mm Nodpeiwbfuofx Ab Uewl No of Grippers: 10 Second flexible pusher: yes Panel Rotation Station: yes

Year of construction: 2011, condition: excellent (used), functionality: fully functional, machine/vehicle number: 01603, Used Cryovac BL 14 manual bag loader. Year of manufacture 2011, very good condition and work, power supply 0,35 kW, 50 Hz, 220V, 10 A, serial number 01603. It dispenses the bags by winding the bag tapes onto a spool and opens them by means of an air stream created by a blower unit. Minimal bag contamination ensuring superior seal integrity Fast adjustment of bag width Machine achieves up to 30 products/min depending on operator Effective bag operability to minimize misleading Short downtime between refills with Cryovac Plug’n Pack system Quick change over to minimize downtime during product size changes Applications: Poultry; Cheese; Processed meat Robust, high quality build standard using food approved materials throughout - Light and easy to move - Versatile in application - Electrical supply only - Hygienic design makes cleaning easy and effective Sales price: 2.400 Euro + VAT, negotiable, FCA Oradea, Romania Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana Nodez Evnpepfx Ab Uswl

Condition: new, *IMMEDIATELY AVAILABLE* Incl.: Hydraulically Lowerable Equipment: -Low loading platform -10x tie-down points -Shock absorbers + 100 km/h Net: €4,025.21 / Gross: €4,790.00 Article number: UNA118311815.01 Technical data: • Brand: Unsinn • Model: UA 3118-18-13 • Vehicle type: Lowering trailer • Vehicle condition: New vehicle • Initial registration: without initial registration • TÜV/HU (technical inspection): 2 years from initial registration • Internal dimensions (L x W x H): 315 x 180 x 15 cm • External dimensions (L x W x H): 463 x 238 x 96 cm • Loading height of the floor: 46 cm • Perm. total weight: 1,800 kg • Unladen weight: 475 kg • Payload: 1,325 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Body, 3-sided, made of sturdy steel profile, galvanized and powder-coated in black-grey (RAL 7021) • Continuous ramp allows driving onto the trailer over the entire width of the loading platform Nwjdozy A Syspfx Ab Uol • Insertion options at all corners for e.g. tarpaulin frame • Foldable license plate holder • Sturdy plastic fenders: • 8 foldable tie-down points in the side wall profile • 1 tie-down point in the end wall profile • 1 tie-down ring on the loading platform at the rear in the middle • Reinforced, automatic support wheel for safe parking of the loaded trailer • Made of multi-layered, screen-printed plywood, 18 mm, continuous without joints, non-slip and waterproof • Loading angle in the lowered state approx. 6° • License plate holder at the rear, can be swung aside for loading • Reverse automatic • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the middle _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery nationwide possible - All prices include VAT. - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Subject to errors, omissions and prior sale -